NIN-PB4R7KTRF - NIC Components Corp.

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

• EIA SIZES A (1210), B (1812), C (1008) AND D (0805)

• EXCELLENT HIGH Q AND HIGH SRF CHARACTERISTICS

• BOTH FLOW AND REFLOW SOLDERING APPLICABLE

• HIGH INDUCTANCE AVAILABLE IN SMALL SIZE

• EMBOSSED PLASTIC TAPE PACKAGE FOR AUTOMATIC PICK-PLACE

Molded Chip Wirewound Inductors NIN Series

AVAILABLE TYPE AND RANGE

SPECIFICATIONS

ENVIRONMENTAL CHARACTERISTICS

FEATURES

EIA Size Size Code Size (L x W x H mm) NIC Type Inductance

Range Style

0805 D 2.0 x 1.25 x 1.25 NIN-ND 10nH ~ 1.0μHStandard

1008 C 2.5 x 2.0 x 1.6

NIN-FC 0.22 ~ 100μH Standard

NIN-NC 10nH ~ 0.82μH High Frequency

NIN-PC 1.0 ~ 33μH High Curret

1210 A 3.2 x 2.5 x 2.2

NIN-FA 0.22 ~ 220μH Standard

NIN-NA 47nH ~ 8.2μH High Frequency

NIN-PA 1.0 ~ 330μHHigh Current

1812 B 4.5 x 3.2 x 3.2 NIN-FB 0.1 ~ 1000μHStandard

NIN-PB 1.0 ~ 680μHHigh Current

Speciﬁ cations Case Size

0805 1008 1210 1812

Inductance Range 10nH ~ 1.0μH10nH ~ 100μH 47nH ~ 330μH 0.10μH ~ 1000μH

Inductance Tolerance ±10% (K), ±5% (J) ±20% (M), ±10% (K), ±5% (J) ±10% (K), ±5% (J)

Operating Temperature Range -25°C ~ +85°C (at 100% of rated voltage)

Insulation Resistance 1,000 MegOhm Min. (@ 100Vdc, Termination to Case)

Withstanding Voltage 250Vdc for 1 minute (Termination to Case)

Q Factor, Self Resonant Frequency,

DC Resistance, Rated DC Current

and Inductance Tolerance

See Individual Product Listings

Test Speciﬁ cation Test Method & Condition

Solderability 90% Min. Coverage After 3 Sec. Dip in +230°C Solder Pot (Post Flux)

Humidity (1) No Evidence of Damage

(2) Inductance Shall Be Within

±5% of Initial Value

(3) Q Factor Shall Be Within

±10% of Initial Value

After 500 Hrs at +60°C and 90~95% RH

Soldering Effect After 5 Sec. at +260°C (5 min. 120°C Pre-Heat)

Low Frequency Vibration After 2 Hrs per Axis, 10 ~ 55Hz, 1.5mm Amplitude

Thermal Shock After 100 Cycles (-40°C ~ +85°C) 30 Min. Each

Low Temperature Storage After 500 Hrs at -40°C

High Temperature Load

Life

(1) No Evidence of Damage

(2) Inductance Shall Be Within

±10% of Initial Value

(3) Q Factor Shall Be Within

±10% of Initial Value

After 500 Hrs. at +85°C with Rated DC Current

Humidity Load Life After 500 Hrs at +60°C with 90~95% RH

at Rated DC Current

Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.

2NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

Molded Chip Wirewound Inductors NIN Series

DIMENSIONS (mm)

SIZE B

Applicable Guidelines:

1. Recommended soldering conditions :

Flow (wave): 250oC for 5 sec. max. (preheating of 120oC for 5 minutes.)

Reﬂ ow: 250oC for 10 sec. max., total time above 230°C is 40 sec. max. (preheating 150°C ~ 180°C/120 sec. max.)

2. Avoid placing inductor over any metal pattern on the PCB, which may create mutual inductance problems.

3. For mounting, it is suggested to secure chip inductor by means of epoxy adhesive curable by ultraviolet.

4. Ultrasonic cleaning is not recommended. If it is necessary, the cleaning conditions must be examined so as not to create mechanical

damage by unexpected resonant vibration. Please contact our engineering department.

5. An excessive mechanical force may effect the electrical and magnetic properties of chip inductors. Make sure not to use any stress

greater than 2Kg when component is placed.

SIZE A, C and D

PART MARKING (1) 3 digits system in μH

(2) R indicates decimal point in μH Ex:2R7 = 2.7μH

Ex:R18 = .18μH = 180nH

(3) N indicates nanohenries (0.001 μH), Ex: 10N = 0.01 μH = 10nH

Inductance Tolerance Code:

M = ±20%, K = ±10%, J = ±5%

Packaging: TR = Tape & Reel

PART NUMBER SYSTEM

Rated inductance in μH (3 digits, ﬁ rst 2 numbers

are signiﬁ cant, R stands for decimal point)

NIN-FA

Series-Type

Lead Free/RoHS compliant

(99.3% Sn, 0.7% Cu)

R47 M TR F

EIA Size Size Code Dim. L Dim. W Dim. H Dim. A Dim. B

0805 D 2.0 +0.3/-0.2 1.25 ± 0.3 1.25 ± 0.3 1.0 ± 0.1 0.4 ± 0.2

1008 C 2.5 +0.3/-0.2 2.0 ± 0.2 1.6 ± 0.2 1.2 ± 0.1 0.4 ± 0.2

1210 A 3.2 ± 0.3 2.5 ± 0.2 2.2 ± 0.2 1.9 ± 0.1 0.6 ± 0.2

1812 B 4.5 ± 0.3 3.2 ± 0.2 3.2 ± 0.2 1.2 ± 0.2 1.0 ± 0.2

Inductance

Tolerance

Marking for

Tolerance Example

±20% M 2R2M

±10% No Identiﬁ cation 470

±5% J 270J

MARKING

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

NIC

P/N

'L'

Inductance

(nH)

Tolerance 'Q'

Factor

(min.)

L & Q

Test

Frequency

SRF

MHz

(min.)

Resistance

(ohms) Max.

Rated

DC Current

(mA) Max.(std) (opt)

NIN-ND10NKTRF 10 ±10% (K) - 10 100 MHz 3300 0.18 540

NIN-ND12NKTRF 12 ±10% (K) - 10 100 MHz 3300 0.24 535

NIN-ND15NKTRF 15 ±10% (K) - 12 100 MHz 3000 0.24 520

NIN-ND18NKTRF 18 ±10% (K) - 12 100 MHz 3000 0.29 480

NIN-ND22NKTRF 22 ±10% (K) - 12 100 MHz 2600 0.29 465

NIN-ND27NKTRF 27 ±10% (K) - 15 100 MHz 2500 0.34 455

NIN-ND33NxTRF 33 ±10% (K) ±5% (J) 15 100 MHz 2050 0.39 395

NIN-ND39NxTRF 39 ±10% (K) ±5% (J) 15 100 MHz 2000 0.41 390

NIN-ND47NxTRF 47 ±10% (K) ±5% (J) 15 100 MHz 1650 0.46 385

NIN-ND56NxTRF 56 ±10% (K) ±5% (J) 15 100 MHz 1550 0.51 360

NIN-ND68NxTRF 68 ±10% (K) ±5% (J) 15 100 MHz 1450 0.57 340

NIN-ND82NxTRF 82 ±10% (K) ±5% (J) 15 100 MHz 1100 0.63 330

NIN-NDR10xTRF 100 ±10% (K) ±5% (J) 8 25.2 MHz 800 0.86 285

NIN-NDR12xTRF 120 ±10% (K) ±5% (J) 8 25.2 MHz 600 0.99 275

NIN-NDR15xTRF 150 ±10% (K) ±5% (J) 10 25.2 MHz 600 1.47 230

NIN-NDR18xTRF 180 ±10% (K) ±5% (J) 10 25.2 MHz 600 1.61 195

NIN-NDR22xTRF 220 ±10% (K) ±5% (J) 10 25.2 MHz 500 1.84 170

NIN-NDR27xTRF 270 ±10% (K) ±5% (J) 10 25.2 MHz 300 1.95 165

NIN-NDR33xTRF 330 ±10% (K) ±5% (J) 10 25.2 MHz 200 2.16 160

NIN-NDR39xTRF 390 ±10% (K) ±5% (J) 10 25.2 MHz 150 2.37 150

NIN-NDR47xTRF 470 ±10% (K) ±5% (J) 10 25.2 MHz 150 2.56 145

NIN-NDR56xTRF 560 ±10% (K) ±5% (J) 10 25.2 MHz 100 2.69 140

NIN-NDR68xTRF 680 ±10% (K) ±5% (J) 10 25.2 MHz 100 3.02 130

NIN-NDR82xTRF 820 ±10% (K) ±5% (J) 10 25.2 MHz 80 3.38 125

NIN-ND1R0xTRF 1,000 ±10% (K) ±5% (J) 8 7.96 MHz 80 3.88 120

Molded Chip Wirewound Inductors NIN Series

NIN-ND SERIES D SIZE (0805) STANDARD TYPE

Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.

4NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

Molded Chip Wirewound Inductors NIN Series

NIN-FC SERIES C SIZE (1008) STANDARD TYPE

For Quality Factor (Q) and Inductance (L)

over Frequency curves

see www.RFpassives.com

NIC

P/N

'L'

Inductance

(μH)

Tolerance 'Q'

Factor

(min.)

L & Q

Test

Frequency

SRF

MHz

(min.)

Resistance

(ohms) Max.

Rated

DC Current

(mA) Max.(std) (opt)

NIN-FCR22xTRF 0.22 ±20% (M) ±10% (K) 25 25.2 MHz 230 0.70 190

NIN-FCR27xTRF 0.27 ±20% (M) ±10% (K) 25 25.2 MHz 210 0.75 180

NIN-FCR33xTRF 0.33 ±20% (M) ±10% (K) 25 25.2 MHz 190 0.85 170

NIN-FCR39xTRF 0.39 ±20% (M) ±10% (K) 25 25.2 MHz 175 0.95 160

NIN-FCR47xTRF 0.47 ±20% (M) ±10% (K) 25 25.2 MHz 160 1.00 155

NIN-FCR56xTRF 0.56 ±20% (M) ±10% (K) 25 25.2 MHz 150 1.10 150

NIN-FCR68xTRF 0.68 ±20% (M) ±10% (K) 25 25.2 MHz 135 1.25 140

NIN-FCR82xTRF 0.82 ±20% (M) ±10% (K) 25 25.2 MHz 125 1.40 130

NIN-FC1R0xTRF 1.0 ±10% (K) ±5% (J) 25 7.96 MHz 115 0.65 195

NIN-FC1R2xTRF 1.2 ±10% (K) ±5% (J) 25 7.96 MHz 100 0.75 180

NIN-FC1R5xTRF 1.5 ±10% (K) ±5% (J) 25 7.96 MHz 90 0.85 170

NIN-FC1R8xTRF 1.8 ±10% (K) ±5% (J) 25 7.96 MHz 85 0.95 160

NIN-FC2R2xTRF 2.2 ±10% (K) ±5% (J) 25 7.96 MHz 80 1.05 155

NIN-FC2R7xTRF 2.7 ±10% (K) ±5% (J) 25 7.96 MHz 75 1.20 145

NIN-FC3R3xTRF 3.3 ±10% (K) ±5% (J) 25 7.96 MHz 65 1.30 135

NIN-FC3R9xTRF 3.9 ±10% (K) ±5% (J) 25 7.96 MHz 60 1.40 130

NIN-FC4R7xTRF 4.7 ±10% (K) ±5% (J) 25 7.96 MHz 55 1.55 125

NIN-FC5R6xTRF 5.8 ±10% (K) ±5% (J) 25 7.96 MHz 50 1.75 120

NIN-FC6R8xTRF 6.8 ±10% (K) ±5% (J) 25 7.96 MHz 45 1.95 115

NIN-FC8R2xTRF 8.2 ±10% (K) ±5% (J) 25 7.96 MHz 40 2.20 105

NIN-FC100xTRF 10 ±10% (K) ±5% (J) 25 2.52 MHz 32 3.50 80

NIN-FC120xTRF 12 ±10% (K) ±5% (J) 25 2.52 MHz 30 3.80 75

NIN-FC150xTRF 15 ±10% (K) ±5% (J) 25 2.52 MHz 28 4.40 70

NIN-FC180xTRF 18 ±10% (K) ±5% (J) 25 2.52 MHz 25 5.00 65

NIN-FC220xTRF 22 ±10% (K) ±5% (J) 25 2.52 MHz 22 5.80 60

NIN-FC270xTRF 27 ±10% (K) ±5% (J) 25 2.52 MHz 21 6.30 115

NIN-FC330xTRF 33 ±10% (K) ±5% (J) 25 2.52 MHz 20 7.10 110

NIN-FC390xTRF 39 ±10% (K) ±5% (J) 25 2.52 MHz 18 9.50 90

NIN-FC470xTRF 47 ±10% (K) ±5% (J) 25 2.52 MHz 17 11.0 80

NIN-FC560xTRF 56 ±10% (K) ±5% (J) 25 2.52 MHz 16 12.1 75

NIN-FC680xTRF 68 ±10% (K) ±5% (J) 25 2.52 MHz 15 16.6 70

NIN-FC820xTRF 82 ±10% (K) ±5% (J) 25 2.52 MHz 13 19.0 65

NIN-FC101xTRF 100 ±10% (K) ±5% (J) 25 0.796 MHz 12 21.0 60

Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

Molded Chip Wirewound Inductors NIN Series

NIN-NC SERIES C SIZE (1008) HIGH FREQUENCY TYPE

NIC

P/N

'L'

Inductance

(nH)

Tolerance 'Q'

Factor

(min.)

L & Q

Test

Frequency

SRF

MHz

(min.)

Resistance

(ohms) Max.

Rated

DC Current

(mA) Max.(std) (opt)

NIN-NC10NKTRF 10 ±10% (K) - - - 10 100 MHz 2500 0.32 280

NIN-NC12NKTRF 12 ±10% (K) - - - 10 100 MHz 2200 0.34 270

NIN-NC15NKTRF 15 ±10% (K) - - - 10 100 MHz 1800 0.38 255

NIN-NC18NKTRF 18 ±10% (K) - - - 10 100 MHz 1550 0.40 250

NIN-NC22NKTRF 22 ±10% (K) - - - 15 100 MHz 1350 0.43 240

NIN-NC27NKTRF 27 ±10% (K) - - - 15 100 MHz 1150 0.47 230

NIN-NC33NxTRF 33 ±10% (K) ±5% (J) 15 100 MHz 1000 0.51 220

NIN-NC39NxTRF 39 ±10% (K) ±5% (J) 15 100 MHz 890 0.55 215

NIN-NC47NxTRF 47 ±10% (K) ±5% (J) 15 100 MHz 770 0.59 205

NIN-NC56NxTRF 56 ±10% (K) ±5% (J) 15 100 MHz 670 0.63 200

NIN-NC68NxTRF 68 ±10% (K) ±5% (J) 15 100 MHz 590 0.68 190

NIN-NC82NxTRF 82 ±10% (K) ±5% (J) 15 100 MHz 520 0.73 185

NIN-NCR10xTRF 100 ±10% (K) ±5% (J) 10 25.2 MHz 460 0.80 175

NIN-NCR12xTRF 120 ±10% (K) ±5% (J) 10 25.2 MHz 400 0.87 170

NIN-NCR15xTRF 150 ±10% (K) ±5% (J) 10 25.2 MHz 340 0.98 160

NIN-NCR18xTRF 180 ±10% (K) ±5% (J) 10 25.2 MHz 300 1.05 155

NIN-NCR22xTRF 220 ±10% (K) ±5% (J) 10 25.2 MHz 260 1.15 145

NIN-NCR27xTRF 270 ±10% (K) ±5% (J) 10 25.2 MHz 230 1.25 140

NIN-NCR33xTRF 330 ±10% (K) ±5% (J) 10 25.2 MHz 200 1.37 135

NIN-NCR39xTRF 390 ±10% (K) ±5% (J) 10 25.2 MHz 180 1.47 130

NIN-NCR47xTRF 470 ±10% (K) ±5% (J) 10 25.2 MHz 160 1.58 125

NIN-NCR56xTRF 560 ±10% (K) ±5% (J) 10 25.2 MHz 145 1.70 120

NIN-NCR68xTRF 680 ±10% (K) ±5% (J) 10 25.2 MHz 130 1.85 110

NIN-NCR82xTRF 820 ±10% (K) ±5% (J) 10 25.2 MHz 100 2.10 100

For Quality Factor (Q) and Inductance (L)

over Frequency curves

see www.RFpassives.com

Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.

6NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

Molded Chip Wirewound Inductors NIN Series

NIN-PC SERIES C SIZE (1008) HIGH CURRENT TYPE

For Quality Factor (Q) and Inductance (L)

over Frequency curves

see www.RFpassives.com

NIC

P/N

'L'

Inductance

(nH)

Tolerance 'Q'

Factor

(min.)

L & Q

Test

Frequency

SRF

MHz

(min.)

Resistance

(ohms) Max.

Rated

DC Current

(mA) Max.(std) (opt)

NIN-PC1R0MTRF 1.0 ±20% (M) - - - 10 7.96 MHz 95 0.45 475

NIN-PC1R5MTRF 1.5 ±20% (M) - - - 10 7.96 MHz 85 0.55 435

NIN-PC2R2MTRF 2.2 ±20% (M) - - - 10 7.96 MHz 65 0.65 390

NIN-PC3R3MTRF 3.3 ±20% (M) - - - 8 7.96 MHz 55 0.85 340

NIN-PC4R7MTRF 4.7 ±20% (M) - - - 8 7.96 MHz 43 1.20 285

NIN-PC6R8MTRF 6.8 ±20% (M) - - - 8 7.96 MHz 39 1.30 275

NIN-PC100KTRF 10 ±10% (K) - - - 20 2.52 MHz 32 2.20 210

NIN-PC120KTRF 12 ±10% (K) - - - 20 2.52 MHz 25 2.70 195

NIN-PC150KTRF 15 ±10% (K) - - - 20 2.52 MHz 21 3.20 175

NIN-PC220KTRF 22 ±10% (K) - - - 20 2.52 MHz 18 4.00 160

NIN-PC330KTRF 33 ±10% (K) - - - 20 2.52 MHz 16 6.50 120

Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

Molded Chip Wirewound Inductors NIN Series

NIN-FA SERIES A SIZE (1210) STANDARD TYPE

For Quality Factor (Q) and Inductance (L)

over Frequency curves

see www.RFpassives.com

NIC

P/N

'L'

Inductance

(μH)

Tolerance 'Q'

Factor

(min.)

L & Q

Test

Frequency

SRF

MHz

(min.)

Resistance

(ohms) Max.

Rated

DC Current

(mA) Max.(std) (opt)

NIN-FAR22xTRF 0.22 ±20% (M) ±10% (K) 25 25.2 MHz 230 0.29 360

NIN-FAR27xTRF 0.27 ±20% (M) ±10% (K) 25 25.2 MHz 210 0.32 345

NIN-FAR33xTRF 0.33 ±20% (M) ±10% (K) 25 25.2 MHz 190 0.35 330

NIN-FAR39xTRF 0.39 ±20% (M) ±10% (K) 25 25.2 MHz 175 0.39 305

NIN-FAR47xTRF 0.47 ±20% (M) ±10% (K) 25 25.2 MHz 160 0.44 290

NIN-FAR56xTRF 0.56 ±20% (M) ±10% (K) 25 25.2 MHz 150 0.49 275

NIN-FAR68xTRF 0.68 ±20% (M) ±10% (K) 25 25.2 MHz 135 0.55 260

NIN-FAR82xTRF 0.82 ±20% (M) ±10% (K) 25 25.2 MHz 125 0.61 245

NIN-FA1R0xTRF 1.0 ±10% (K) ±5% (J) 30 7.96 MHz 115 0.69 230

NIN-FA1R2xTRF 1.2 ±10% (K) ±5% (J) 30 7.96 MHz 100 0.75 215

NIN-FA1R5xTRF 1.5 ±10% (K) ±5% (J) 30 7.96 MHz 90 0.75 210

NIN-FA1R8xTRF 1.8 ±10% (K) ±5% (J) 30 7.96 MHz 85 0.82 200

NIN-FA2R2xTRF 2.2 ±10% (K) ±5% (J) 30 7.96 MHz 80 0.95 190

NIN-FA2R7xTRF 2.7 ±10% (K) ±5% (J) 30 7.96 MHz 75 1.10 180

NIN-FA3R3xTRF 3.3 ±10% (K) ±5% (J) 30 7.96 MHz 65 1.20 180

NIN-FA3R9xTRF 3.9 ±10% (K) ±5% (J) 30 7.96 MHz 60 1.30 175

NIN-FA4R7xTRF 4.7 ±10% (K) ±5% (J) 30 7.96 MHz 55 1.50 165

NIN-FA5R6TRF 5.6 ±10% (K) ±5% (J) 30 7.96 MHz 50 1.60 160

NIN-FA6R8xTRF 6.8 ±10% (K) ±5% (J) 30 7.96 MHz 45 1.80 150

NIN-FA8R2xTRF 8.2 ±10% (K) ±5% (J) 30 7.96 MHz 40 2.00 140

NIN-FA100xTRF 10 ±10% (K) ±5% (J) 30 2.52 MHz 36 2.10 140

NIN-FA120xTRF 12 ±10% (K) ±5% (J) 30 2.52 MHz 33 2.50 125

NIN-FA150xTRF 15 ±10% (K) ±5% (J) 30 2.52 MHz 30 2.80 120

NIN-FA180xTRF 18 ±10% (K) ±5% (J) 30 2.52 MHz 27 3.30 110

NIN-FA220xTRF 22 ±10% (K) ±5% (J) 30 2.52 MHz 25 3.70 105

NIN-FA270xTRF 27 ±10% (K) ±5% (J) 30 2.52 MHz 22 5.00 90

NIN-FA330xTRF 33 ±10% (K) ±5% (J) 30 2.52 MHz 20 5.60 85

NIN-FA390xTRF 39 ±10% (K) ±5% (J) 30 2.52 MHz 20 6.40 80

NIN-FA470xTRF 47 ±10% (K) ±5% (J) 30 2.52 MHz 15 7.00 75

NIN-FA560xTRF 56 ±10% (K) ±5% (J) 30 2.52 MHz 15 8.00 70

NIN-FA680xTRF 68 ±10% (K) ±5% (J) 30 2.52 MHz 15 9.00 65

NIN-FA820xTRF 82 ±10% (K) ±5% (J) 30 2.52 MHz 11 10.0 60

NIN-FA101xTRF 100 ±10% (K) ±5% (J) 20 0.796 MHz 10 10.0 60

NIN-FA121xTRF 120 ±10% (K) ±5% (J) 20 0.796 MHz 10 11.0 55

NIN-FA151xTRF 150 ±10% (K) ±5% (J) 20 0.796 MHz 8 15.0 50

NIN-FA181xTRF 180 ±10% (K) ±5% (J) 20 0.796 MHz 7 17.0 50

NIN-FA221xTRF 220 ±10% (K) ±5% (J) 20 0.796 MHz 7 21.0 45

Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.

8NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

Molded Chip Wirewound Inductors NIN Series

NIN-NA SERIES A SIZE (1210) HIGH FREQUENCY

NIC

P/N

'L'

Inductance

(μH)

Tolerance 'Q'

Factor

(min.)

L & Q

Test

Frequency

SRF

MHz

(min.)

Resistance

(ohms) Max.

Rated

DC Current

(mA) Max.(std) (opt)

NIN-NA47NMTRF 0.047 ±20% (M) - - - 10 100 MHz 680 0.20 450

NIN-NA56NMTRF 0.056 ±20% (M) - - - 10 100 MHz 600 0.22 420

NIN-NA68NMTRF 0.068 ±20% (M) - - - 10 100 MHz 540 0.25 400

NIN-NA82NMTRF 0.082 ±20% (M) - - - 10 100 MHz 500 0.27 380

NIN-NAR10MTRF 0.10 ±20% (M) - - - 10 100 MHz 450 0.30 360

NIN-NAR12MTRF 0.12 ±20% (M) - - - 10 25.2 MHz 400 0.67 240

NIN-NAR15MTRF 0.15 ±20% (M) - - - 10 25.2 MHz 350 0.72 230

NIN-NAR18MTRF 0.18 ±20% (M) - - - 10 25.2 MHz 320 0.81 220

NIN-NAR22KTRF 0.22 ±10% (K) - - - 10 25.2 MHz 280 0.90 210

NIN-NAR27KTRF 0.27 ±10% (K) - - - 10 25.2 MHz 250 1.00 200

NIN-NAR33KTRF 0.33 ±10% (K) - - - 10 25.2 MHz 220 1.10 190

NIN-NAR39KTRF 0.39 ±10% (K) - - - 10 25.2 MHz 200 1.20 180

NIN-NAR47KTRF 0.47 ±10% (K) - - - 10 25.2 MHz 180 1.40 175

NIN-NAR56KTRF 0.56 ±10% (K) - - - 10 25.2 MHz 160 1.50 170

NIN-NAR68KTRF 0.68 ±10% (K) - - - 10 25.2 MHz 150 1.70 155

NIN-NAR82KTRF 0.82 ±10% (K) - - - 10 25.2 MHz 135 1.90 145

NIN-NA1R0JTRF 1.0 ±5% (J) - - - 13 7.96 MHz 120 2.10 125

NIN-NA1R2JTRF 1.2 ±5% (J) - - - 13 7.96 MHz 110 2.20 120

NIN-NA1R5JTRF 1.5 ±5% (J) - - - 13 7.96 MHz 95 2.70 115

NIN-NA1R8JTRF 1.8 ±5% (J) - - - 13 7.96 MHz 85 3.00 110

NIN-NA2R2JTRF 2.2 ±5% (J) - - - 13 7.96 MHz 80 3.20 110

NIN-NA2R7JTRF 2.7 ±5% (J) - - - 13 7.96 MHz 70 3.60 105

NIN-NA3R3JTRF 3.3 ±5% (J) - - - 13 7.96 MHz 62 4.20 100

NIN-NA3R9JTRF 3.9 ±5% (J) - - - 13 7.96 MHz 57 4.40 95

NIN-NA4R7JTRF 4.7 ±5% (J) - - - 13 7.96 MHz 52 7.70 70

NIN-NA5R6JTRF 5.6 ±5% (J) - - - 13 7.96 MHz 46 8.70 65

NIN-NA6R8JTRF 6.8 ±5% (J) - - - 13 7.96 MHz 42 10.0 60

NIN-NA8R2JTRF 8.2 ±5% (J) - - - 13 7.96 MHz 38 11.0 60

For Quality Factor (Q) and Inductance (L)

over Frequency curves

see www.RFpassives.com

Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

Molded Chip Wirewound Inductors

NIN-PA SERIES A SIZE (1210) HIGH CURRENT TYPE

For Quality Factor (Q) and Inductance (L)

over Frequency curves

see www.RFpassives.com

NIN Series

NIC

P/N

'L'

Inductance

(μH)

Tolerance 'Q'

Factor

(min.)

L & Q

Test

Frequency

SRF

MHz

(min.)

Resistance

(ohms) Max.

Rated

DC Current

(mA) Max.(std) (opt)

NIN-PA1R0MTRF 1.0 ±20% (M) - - - 7 7.96 MHz 150 0.15 600

NIN-PA1R5MTRF 1.5 ±20% (M) - - - 7 7.96 MHz 110 0.18 550

NIN-PA2R2MTRF 2.2 ±20% (M) - - - 7 7.96 MHz 80 0.23 500

NIN-PA3R3MTRF 3.3 ±20% (M) - - - 7 7.96 MHz 56 0.28 400

NIN-PA4R7MTRF 4.7 ±20% (M) - - - 7 7.96 MHz 46 0.34 350

NIN-PA6R8MTRF 6.8 ±20% (M) - - - 7 7.96 MHz 38 0.42 300

NIN-PA100KTRF 10 ±10% (K) - - - 15 2.52 MHz 23 0.50 240

NIN-PA120KTRF 12 ±10% (K) - - - 15 2.52 MHz 21 0.60 230

NIN-PA150KTRF 15 ±10% (K) - - - 15 2.52 MHz 18 0.74 220

NIN-PA180KTRF 18 ±10% (K) - - - 15 2.52 MHz 17 0.90 205

NIN-PA220KTRF 22 ±10% (K) - - - 15 2.52 MHz 15 1.15 185

NIN-PA270KTRF 27 ±10% (K) - - - 15 2.52 MHz 13 1.45 165

NIN-PA330KTRF 33 ±10% (K) - - - 15 2.52 MHz 12 1.65 155

NIN-PA390KTRF 39 ±10% (K) - - - 15 2.52 MHz 11 1.90 145

NIN-PA470KTRF 47 ±10% (K) - - - 15 2.52 MHz 9.5 2.25 135

NIN-PA560KTRF 56 ±10% (K) - - - 15 2.52 MHz 8.5 3.30 110

NIN-PA680KTRF 68 ±10% (K) - - - 15 2.52 MHz 7.5 3.70 105

NIN-PA820KTRF 82 ±10% (K) - - - 15 2.52 MHz 7.0 4.20 100

NIN-PA101KTRF 100 ±10% (K) - - - 20 0.796 MHz 6.5 5.00 90

NIN-PA121KTRF 120 ±10% (K) - - - 20 0.796 MHz 6.0 7.00 75

NIN-PA151KTRF 150 ±10% (K) - - - 20 0.796 MHz 5.5 8.00 70

NIN-PA181KTRF 180 ±10% (K) - - - 20 0.796 MHz 5.0 9.50 65

NIN-PA221KTRF 220 ±10% (K) - - - 20 0.796 MHz 4.0 11.0 60

NIN-PA271KTRF 270 ±10% (K) - - - 20 0.796 MHz 3.5 14.5 55

NIN-PA331KTRF 330 ±10% (K) - - - 20 0.796 MHz 3.0 16.0 50

Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.

10 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

Molded Chip Wirewound Inductor

NIN-FB SERIES B-SIZE (1812) STANDARD VALUES

For Quality Factor (Q) and Inductance (L)

over Frequency curves

see www.RFpassives.com

NIC

P/N

'L'

Inductance

(μH)

Tolerance 'Q'

Factor

(min.)

L & Q

Test

Frequency

SRF

MHz

(min.)

Resistance

(ohms) Max.

Rated

DC Current

(mA) Max.(std) (opt)

NIN-FBR10xTRF 0.10 ±20% (M) ±10% (K) 35 25.2 MHz 300 0.18 800

NIN-FBR12xTRF 0.12 ±20% (M) ±10% (K) 35 25.2 MHz 280 0.20 770

NIN-FBR15xTRF 0.15 ±20% (M) ±10% (K) 35 25.2 MHz 250 0.22 730

NIN-FBR18xTRF 0.18 ±20% (M) ±10% (K) 35 25.2 MHz 220 0.24 700

NIN-FBR22xTRF 0.22 ±20% (M) ±10% (K) 40 25.2 MHz 200 0.25 665

NIN-FBR27xTRF 0.27 ±20% (M) ±10% (K) 40 25.2 MHz 180 0.26 635

NIN-FBR33xTRF 0.33 ±20% (M) ±10% (K) 40 25.2 MHz 165 0.28 605

NIN-FBR39xTRF 0.39 ±20% (M) ±10% (K) 40 25.2 MHz 150 0.30 575

NIN-FBR47xTRF 0.47 ±20% (M) ±10% (K) 40 25.2 MHz 145 0.32 545

NIN-FBR56xTRF 0.56 ±20% (M) ±10% (K) 40 25.2 MHz 140 0.36 520

NIN-FBR68xTRF 0.68 ±20% (M) ±10% (K) 40 25.2 MHz 135 0.40 500

NIN-FBR82xTRF 0.82 ±20% (M) ±10% (K) 40 25.2 MHz 130 0.45 475

NIN-FB1R0xTRF 1.0 ±20% (M) ±10% (K) 50 7.96 MHz 100 0.50 450

NIN-FB1R2xTRF 1.2 ±20% (M) ±10% (K) 50 7.96 MHz 80 0.55 430

NIN-FB1R5xTRF 1.5 ±20% (M) ±10% (K) 50 7.96 MHz 70 0.60 410

NIN-FB1R8xTRF 1.8 ±20% (M) ±10% (K) 50 7.96 MHz 60 0.65 390

NIN-FB2R2xTRF 2.2 ±20% (M) ±10% (K) 50 7.96 MHz 55 0.70 380

NIN-FB2R7xTRF 2.7 ±20% (M) ±10% (K) 50 7.96 MHz 50 0.75 370

NIN-FB3R3xTRF 3.3 ±20% (M) ±10% (K) 50 7.96 MHz 45 0.80 355

NIN-FB3R9xTRF 3.9 ±20% (M) ±10% (K) 50 7.96 MHz 40 0.90 330

NIN-FB4R7xTRF 4.7 ±20% (M) ±10% (K) 50 7.96 MHz 35 1.00 315

NIN-FB5R6xTRF 5.6 ±20% (M) ±10% (K) 50 7.96 MHz 33 1.10 300

NIN-FB6R8xTRF 6.8 ±20% (M) ±10% (K) 50 7.96 MHz 27 1.20 285

NIN-FB8R2xTRF 8.2 ±20% (M) ±10% (K) 50 7.96 MHz 25 1.40 270

NIN Series

Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

Molded Chip Wirewound Inductors

NIN-FB SERIES B-SIZE (1812) STANDARD VALUES

For Quality Factor (Q) and Inductance (L)

over Frequency curves

see www.RFpassives.com

NIN Series

NIC

P/N

'L'

Inductance

(μH)

Tolerance 'Q'

Factor

(min.)

L & Q

Test

Frequency

SRF

MHz

(min.)

Resistance

(ohms) Max.

Rated

DC Current

(mA) Max.(std) (opt)

NIN-FB100xTRF 10 ±10% (K) ±5% (J) 50 2.52 MHz 20 1.60 250

NIN-FB120xTRF 12 ±10% (K) ±5% (J) 50 2.52 MHz 18 2.00 225

NIN-FB150xTRF 15 ±10% (K) ±5% (J) 50 2.52 MHz 17 2.50 200

NIN-FB180xTRF 18 ±10% (K) ±5% (J) 50 2.52 MHz 15 2.80 190

NIN-FB220xTRF 22 ±10% (K) ±5% (J) 50 2.52 MHz 13 3.20 180

NIN-FB270xTRF 27 ±10% (K) ±5% (J) 50 2.52 MHz 12 3.60 170

NIN-FB330xTRF 33 ±10% (K) ±5% (J) 50 2.52 MHz 11 4.00 160

NIN-FB390xTRF 39 ±10% (K) ±5% (J) 50 2.52 MHz 10 4.50 150

NIN-FB470xTRF 47 ±10% (K) ±5% (J) 50 2.52 MHz 10 5.00 140

NIN-FB560xTRF 56 ±10% (K) ±5% (J) 50 2.52 MHz 9.0 5.50 135

NIN-FB680xTRF 68 ±10% (K) ±5% (J) 50 2.52 MHz 9.0 6.00 130

NIN-FB820xTRF 82 ±10% (K) ±5% (J) 50 2.52 MHz 8.0 7.00 120

NIN-FB101xTRF 100 ±10% (K) ±5% (J) 40 0.796 MHz 8.0 8.00 110

NIN-FB121xTRF 120 ±10% (K) ±5% (J) 40 0.796 MHz 6.0 8.00 110

NIN-FB151xTRF 150 ±10% (K) ±5% (J) 40 0.796 MHz 5.0 9.00 105

NIN-FB181xTRF 180 ±10% (K) ±5% (J) 40 0.796 MHz 5.0 9.50 102

NIN-FB221xTRF 220 ±10% (K) ±5% (J) 40 0.796 MHz 4.0 10.0 100

NIN-FB271xTRF 270 ±10% (K) ±5% (J) 40 0.796 MHz 4.0 12.0 92

NIN-FB331xTRF 330 ±10% (K) ±5% (J) 40 0.796 MHz 3.5 14.0 85

NIN-FB391xTRF 390 ±10% (K) ±5% (J) 40 0.796 MHz 3.0 19.0 80

NIN-FB471xTRF 470 ±10% (K) ±5% (J) 40 0.796 MHz 3.0 26.0 62

NIN-FB561xTRF 560 ±10% (K) ±5% (J) 30 0.796 MHz 3.0 30.0 50

NIN-FB681xTRF 680 ±10% (K) ±5% (J) 30 0.796 MHz 3.0 30.0 50

NIN-FB821xTRF 820 ±10% (K) ±5% (J) 30 0.796 MHz 2.5 35.0 30

NIN-FB102xTRF 1000 ±10% (K) ±5% (J) 30 0.796 MHz 2.5 40.0 30

Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.

12 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

NIN-PB SERIES B-SIZE (1812) STANDARD VALUES

NIC

P/N

'L'

Inductance

(μH)

Tolerance 'Q'

Factor

(min.)

L & Q

Test

Frequency

(MHz)

SRF

MHz

(min.)

Resistance

(ohms) Max.

Rated

DC Current

(mA) Max.(std)

NIN-PB1R0KTRF 1 ±10% 10 7.96 200 0.11 1050

NIN-PB1R2KTRF 1.2 ±10% 10 7.96 160 0.12 1000

NIN-PB1R5KTRF 1.5 ±10% 10 7.96 130 0.15 950

NIN-PB1R8KTRF 1.8 ±10% 10 7.96 100 0.16 900

NIN-PB2R2KTRF 2.2 ±10% 10 7.96 80 0.18 850

NIN-PB2R7KTRF 2.7 ±10% 10 7.96 60 0.20 800

NIN-PB3R3KTRF 3.3 ±10% 10 7.96 45 0.22 750

NIN-PB3R9KTRF 3.9 ±10% 10 7.96 40 0.24 700

NIN-PB4R7KTRF 4.7 ±10% 10 7.96 35 0.27 650

NIN-PB5R6KTRF 5.6 ±10% 10 7.96 30 0.30 650

NIN-PB6R8KTRF 6.8 ±10% 10 7.96 28 0.35 600

NIN-PB8R2KTRF 8.2 ±10% 10 7.96 25 0.40 600

NIN-PB100KTRF 10 ±10% 10 2.52 22 0.50 550

NIN-PB120KTRF 12 ±10% 10 2.52 21 0.60 500

NIN-PB150KTRF 15 ±10% 10 2.52 20 0.70 450

NIN-PB180KTRF 18 ±10% 10 2.52 19 0.80 400

NIN-PB220KTRF 22 ±10% 10 2.52 18 0.90 370

NIN-PB270KTRF 27 ±10% 10 2.52 16 1.2 330

NIN-PB330KTRF 33 ±10% 10 2.52 14 1.4 300

NIN-PB390KTRF 39 ±10% 10 2.52 12 1.6 280

NIN-PB470KTRF 47 ±10% 10 2.52 11.5 1.9 260

NIN-PB560KTRF 56 ±10% 10 2.52 11 2.2 240

NIN-PB680KTRF 68 ±10% 10 2.52 10 2.6 220

NIN-PB820KTRF 82 ±10% 10 2.52 9.0 3.5 200

NIN-PB101KTRF 100 ±10% 20 0.796 8.0 4.0 180

NIN-PB121KTRF 120 ±10% 20 0.796 7.5 4.5 160

NIN-PB151KTRF 150 ±10% 20 0.796 7.0 6.5 140

NIN-PB181KTRF 180 ±10% 20 0.796 6.5 7.5 120

NIN-PB221KTRF 220 ±10% 20 0.796 5.5 9.0 120

NIN-PB271KTRF 270 ±10% 20 0.796 5.0 11 100

NIN-PB331KTRF 330 ±10% 20 0.796 4.0 13 90

NIN-PB391KTRF 390 ±10% 20 0.796 3.0 14 85

NIN-PB471KTRF 470 ±10% 20 0.796 3.0 16 75

NIN-PB561KTRF 560 ±10% 20 0.796 3.0 18 70

NIN-PB681KTRF 680 ±10% 20 0.796 2.5 22 65

Molded Chip Wirewound Inductors NIN Series

Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details.

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

Molded Chip Wirewound Inductors NIN Series

CARRIER TAPE DIMENSIONS (mm)

DIMENSIONS (mm)

RECOMMENDED LAND PATTERNS FOR FLOW AND REFLOW SOLDERING

Perforation1.5φ±0.1

4.0

±0.1

NIN Chip Land Pattern

± 0.8

2.0

± 0.5

2.0 ± 0.5

Dφ

50φ

Min.

13φ

±0.5

Case

Code Type Size W±0.3 A±0.2 B±0.2 P±0.1 E±0.1 F±0.1 t1 t2

D ND 0805 8.0 1.45 2.25 4.0 1.75 3.5 0.25 1.55

C FC/NC/PC 1008 8.0 2.4 2.9 4.0 1.75 3.5 0.25 1.85

A FA/NA/PA 1210 8.0 2.8 3.6 4.0 1.75 3.5 0.25 2.40

B FB/PB 1812 12.0 3.6 4.9 8.0 1.75 5.5 0.30 3.50

Case

Code Type Size Dφ±2.0 W±1.5 Qty/Reel

D ND 0805 180 9.0 3000 pcs

C FC/NC/PC 1008 180 9.0 2000 pcs

A FA/NA/PA 1210 180 9.0 2000 pcs

B FB/PB 1812 180 13.0 500 pcs

Case

Code Type Size A B C

D ND 0805 1.0~1.2 3.0~3.8 0.9~1.3

CFC/NC/PC 1008 1.4~1.5 3.5~4.0 1.2~1.6

AFA/NA/PA 1210 1.6~2.0 4.0~4.6 1.9~2.4

BFB 1812 2.0~2.6 5.0~6.0 1.4~2.4