R71QW4330AA0-K - KEMET Electronics Corporation

09/2008 74

Loose Taped

Fig.1 Fig.2

Ø d ±0.05 p ≤15 22.5 ≤ p ≤ 27.5 p = 37.5

0.6 or 0.8* 0.8 1

*See size table.

All dimensions are in mm.

MKP Series

GENERAL TECHNICAL DATA

Dielectric: polypropylene lm.

Plates: metal layer deposited by evaporation under

vacuum.

Winding: non-inductive type.

Leads: tinned wire.

Protection: plastic case, thermosetting resin lled.

Box material is solvent resistant and ame

retardant according to UL94 V0.

Marking: Manufacturer’s logo, series, capacitance,

tolerance, D.C. rated voltage.

Operating temperature range: -40 to +110°C

For temperatures between +105°C and 110°C a

decreasing factor of 4% per degree C on the rated

voltage VR has to be applied.

ELECTRICAL CHARACTERISTICS

Capacitance range: 0.01µF to 22µF

Capacitance tolerances (measured at 1 kHz):

±5% (J) ±10% (K); ±20% (M);

Tolerance available upon requests

Total self-inductance (L): (lead length ~2mm)

Pitch (mm) 10 15 22.5 27.5 37.5

L(nH) ≈9 10 18 18 20

Dissipation factor (DF):

tgδx10-4 at +25°C ±5°C: ≤10 (6)* at 1kHz *

Typical value

Insulation resistance:

Test conditions

Temperature: +25°C±5°C

Voltage charge time: 1 min

Voltage charge: 100 Vdc

Performance

≥1 x 105 MΩ for C ≤0.33µF (5 x 105 MΩ)*

≥30000 s for C >0.33µF (150000 s)*

*Typical value

Test voltage between terminations:

1.6xVR applied for 2 s at +25°C±5°C

R71

MKP Series

METALLIZED POLYPROPYLENE FILM

CAPACITOR

Typical applications: P.F.C. (Power Factor Correction)

PRODUCT CODE: R71

Pitch Box thickness (B) Maximum dimensions (mm)

(mm) (mm) B max H max L max

10.0 All B +0.2 H +0.1 L +0.2

15.0 <7.5 B +0.2 H +0.1 L +0.3

15.0 ≥7.5 B +0.2 H +0.1 L +0.5

22.5 All B +0.2 H +0.1 L +0.3

27.5 All B +0.2 H +0.1 L +0.3

37.5 All B +0.3 H +0.1 L +0.3

TEST METHOD AND PERFORMANCE

Damp heat, steady state:

Test conditions 1st

Temperature: +40°C±2°C

Relative humidity (RH): 93% ±2%

Test duration: 56 days

Test conditions 2nd

Temperature: +60°C±2°C

Relative humidity (RH): 95% ±2%

Test duration: 500 hours

Performance

Capacitance change |∆C/C|: ≤5%

Insulation resistance: ≥50% of initial limit.

Endurance:

Test conditions

Temperature: +105°C±2°C

Test duration: 2000 h

Voltage applied: 1.25xVR

Performance

Capacitance change |∆C/C|: ≤5%

Insulation resistance: ≥50% of initial limit.

Resistance to soldering heat:

Test conditions

Solder bath temperature: +260°C±5°C

Dipping time (with heat screen): 10 s±1 s

Performance

Capacitance change |∆C/C|: ≤2%

Winding scheme

09/2008

Rated

Cap.

420Vdc/220Vac

Std dimensions

Ø d

(mm)

Max

dv/dt

(V/µs)

Max K0

(V2/µs) Part Number

B H L p

0.010 µF 4.0 9.0 13.0 10.0 0.6 250 210 E3 R71MF 2100--0--

0.015 µF 4.0 9.0 13.0 10.0 0.6 250 210 E3 R71MF 2150--0--

0.022 µF 4.0 9.0 13.0 10.0 0.6 250 210 E3 R71MF 2220--0--

0.033 µF 4.0 9.0 13.0 10.0 0.6 250 210 E3 R71MF 2330--0--

0.047 µF 4.0 9.0 13.0 10.0 0.6 250 210 E3 R71MF 2470--0--

0.068 µF 4.0 9.0 13.0 10.0 0.6 250 210 E3 R71MF 2680--3--

0.10 µF 4.0 9.0 13.0 10.0 0.6 250 210 E3 R71MF 3100--3--

0.15 µF 5.0 11.0 13.0 10.0 0.6 250 210 E3 R71MF 3150--3--

0.22 µF 6.0 12.0 13.0 10.0 0.6 250 210 E3 R71MF 3220--3--

0.10 µF 5.0 11.0 18.0 15.0 0.6 160 134 E3 R71MI 3100--0--

0.15 µF 5.0 11.0 18.0 15.0 0.6 160 134 E3 R71MI 3150--0--

0.22 µF 5.0 11.0 18.0 15.0 0.6 160 134 E3 R71MI 3220--0--

0.33 µF 6.0 12.0 18.0 15.0 0.6 160 134 E3 R71MI 3330--0--

0.47 µF 7.5 13.5 18.0 15.0 0.6 160 134 E3 R71MI 3470--0--

0.47 µF 6.0 17.5 18.0 15.0 0.6 160 134 E3 R71MI 3470--1--

0.47 µF 9.0 12.5 18.0 15.0 0.6 160 134 E3 R71MI 3470--2--

0.68 µF 6.0 17.5 18.0 15.0 0.6 160 134 E3 R71MI 3680--4--

0.68 µF 8.5 14.5 18.0 15.0 0.6 160 134 E3 R71MI 3680--3--

0.68 µF 13.0 12.0 18.0 15.0 0.8 160 134 E3 R71MI 3680--2--

1.0 µF 7.5 18.5 18.0 15.0 0.8 160 134 E3 R71MI 4100--4-M

1.0 µF 10.0 16.0 18.0 15.0 0.8 160 134 E3 R71MI 4100--3--

1.5 µF 11.0 19.0 18.0 15.0 0.8 160 134 E3 R71MI 4150--3-

0.22 µF 6.0 15.0 26.5 22.5 0.8 100 84 E3 R71MN 3220--0--

0.33 µF 6.0 15.0 26.5 22.5 0.8 100 84 E3 R71MN 3330--0--

0.47 µF 6.0 15.0 26.5 22.5 0.8 100 84 E3 R71MN 3470--0--

0.68 µF 6.0 15.0 26.5 22.5 0.8 100 84 E3 R71MN 3680--0--

1.0 µF 7.0 16.0 26.5 22.5 0.8 100 84 E3 R71MN 4100--3--

1.5 µF 8.5. 17.0 26.5 22.5 0.8 100 84 E3 R71MN 4150--3-M

1.5 µF 10.0 18.5 26.5 22.5 0.8 100 84 E3 R71MN 4150--0--

2.2 µF 10.0 18.5 26.5 22.5 0.8 100 84 E3 R71MN 4220--4-M

2.2 µF 11.0 20.0 26.5 22.5 0.8 100 84 E3 R71MN 4220--3--

3.3 µF 13.0 22.0 26.5 22.5 0.8 100 84 E3 R71MN 4330--3--

0.68 µF 9.0 17.0 32.0 27.5 0.8 80 67 E3 R71MR 3680--0--

1.0 µF 9.0 17.0 32.0 27.5 0.8 80 67 E3 R71MR 4100--0--

1.5 µF 11.0 20.0 32.0 27.5 0.8 80 67 E3 R71MR 4150--0--

2.2 µF 13.0 22.0 32.0 27.5 0.8 80 67 E3 R71MR 4220--0--

3.3 µF 14.0 28.0 32.0 27.5 0.8 80 67 E3 R71MR 4330--3--

4.7 µF 18.0 33.0 32.0 27.5 0.8 80 67 E3 R71MR 4470--0--

6.8 µF 22.0 37.0 32.0 27.5 0.8 80 67 E3 R71MR 4680--0--

3.3 µF 11.0 22.0 41.5 37.5 1.0 60 50 E3 R71MW 4330--0--

4.7 µF 16.0 28.5 41.5 37.5 1.0 60 50 E3 R71MW 4470--0--

6.8 µF 19.0 32.0 41.5 37.5 1.0 60 50 E3 R71MW 4680--0--

10.0 µF 20.0 40.0 41.5 37.5 1.0 60 50 E3 R71MW 5100--0--

15.0 µF 24.0 44.0 41.5 37.5 1.0 60 50 E3 R71MW 5150--0--

22.0 µF 30.0 45.0 41.5 37.5 1.0 60 50 E3 R71MW 5220--0--

R71

MKP Series

METALLIZED POLYPROPYLENE FILM

CAPACITOR

PRODUCT CODE: R71

Rated

Cap.

520Vdc/250Vac*

Std dimensions

Ø d

(mm)

Max

dv/dt

(V/µs)

Max K0

(V2/µs) Part Number

B H L p

0.010 µF 4.0 9.0 13.0 10.0 0.6 300 312 E3 R71VF 2100--0--

0.015 µF 4.0 9.0 13.0 10.0 0.6 300 312 E3 R71VF 2150--0--

0.022 µF 4.0 9.0 13.0 10.0 0.6 300 312 E3 R71VF 2220--0--

0.033 µF 4.0 9.0 13.0 10.0 0.6 300 312 E3 R71VF 2330--0--

0.047 µF 4.0 9.0 13.0 10.0 0.6 300 312 E3 R71VF 2470--3--

0.068 µF 4.0 9.0 13.0 10.0 0.6 300 312 E3 R71VF 2680--3--

0.10 µF 5.0 11.0 13.0 10.0 0.6 300 312 E3 R71VF 3100--3--

0.15 µF 6.0 12.0 13.0 10.0 0.6 300 312 E3 R71VF 3150--3--

0.10 µF 5.0 11.0 18.0 15.0 0.6 200 208 E3 R71VI 3100--0--

0.15 µF 5.0 11.0 18.0 15.0 0.6 200 208 E3 R71VI 3150--3--

0.22 µF 6.0 12.0 18.0 15.0 0.6 200 208 E3 R71VI 3220--3--

0.22 µF 6.0 17.5 18.0 15.0 0.6 200 208 E3 R71VI 3220--1--

0.33 µF 6.0 17.5 18.0 15.0 0.6 200 208 E3 R71VI 3330--4--

0.33 µF 7.5 13.5 18.0 15.0 0.6 200 208 E3 R71VI 3330--3--

0.33 µF 9.0 12.5 18.0 15.0 0.6 200 208 E3 R71VI 3330--2--

0.47 µF 8.5 14.5 18.0 15.0 0.6 200 208 E3 R71VI 3470--3--

0.47 µF 7.5 18.5 18.0 15.0 0.8 200 208 E3 R71VI 3470--1--

0.47 µF 13.0 12.0 18.0 15.0 0.8 200 208 E3 R71VI 3470--2--

0.68 µF 10.0 16.0 18.0 15.0 0.8 200 208 E3 R71VI 3680--3--

1.0 µF 11.0 19.0 18.0 15.0 0.8 200 208 E3 R71VI 4100--3-M

0.22 µF 6.0 15.0 26.5 22.5 0.8 120 125 E3 R71VN 3220--0--

0.33 µF 6.0 15.0 26.5 22.5 0.8 120 125 E3 R71VN 3330--0--

0.47 µF 6.0 15.0 26.5 22.5 0.8 120 125 E3 R71VN 3470--3--

0.68 µF 7.0 16.0 26.5 22.5 0.8 120 125 E3 R71VN 3680--3--

1.0 µF 10.0 18.5 26.5 22.5 0.8 120 125 E3 R71VN 4100--3--

1.5 µF 11.0 20.0 26.5 22.5 0.8 120 125 E3 R71VN 4150--3--

2.2 µF 13.0 22.0 26.5 22.5 0.8 120 125 E3 R71VN 4220--3--

0.68 µF 9.0 17.0 32.0 27.5 0.8 100 104 E3 R71VR 3680--0--

1.0 µF 9.0 17.0 32.0 27.5 0.8 100 104 E3 R71VR 4100--3--

1.0 µF 11.0 20.0 32.0 27.5 0.8 100 104 E3 R71VR 4100--0--

1.5 µF 11.0 20.0 32.0 27.5 0.8 100 104 E3 R71VR 4150--0--

2.2 µF 13.0 25.0 32.0 27.5 0.8 100 104 E3 R71VR 4220--3--

2.2 µF 14.0 28.0 32.0 27.5 0.8 100 104 E3 R71VR 4220--0--

3.3 µF 14.0 28.0 32.0 27.5 0.8 100 104 E3 R71VR 4330--3--

3.3 µF 18.0 33.0 32.0 27.5 0.8 100 104 E3 R71VR 4330--0--

4.7 µF 18.0 33.0 32.0 27.5 0.8 100 104 E3 R71VR 4470--3--

4.7 µF 22.0 37.0 32.0 27.5 0.8 100 104 E3 R71VR 4470--0--

6.8 µF 22.0 37.0 32.0 27.5 0.8 100 104 E3 R71VR 4680--3--

2.2 µF 11.0 22.0 41.5 37.5 1.0 70 73 E3 R71VW 4220--0--

3.3 µF 13.0 24.0 41.5 37.5 1.0 70 73 E3 R71VW 4330--3--

3.3 µF 16.0 28.5 41.5 37.5 1.0 70 73 E3 R71VW 4330--0--

4.7 µF 16.0 28.5 41.5 37.5 1.0 70 73 E3 R71VW 4470--0--

6.8 µF 19.0 32.0 41.5 37.5 1.0 70 73 E3 R71VW 4680--3--

6.8 µF 20.0 40.0 41.5 37.5 1.0 70 73 E3 R71VW 4680--0--

10.0 µF 20.0 40.0 41.5 37.5 1.0 70 73 E3 R71VW 5100--3--

10.0 µF 24.0 44.0 41.5 37.5 1.0 70 73 E3 R71VW 5100--0--

15.0 µF 24.0 44.0 41.5 37.5 1.0 70 73 E3 R71VW 5150--3--

15.0 µF 30.0 45.0 41.5 37.5 1.0 70 73 E3 R71VW 5150--0--

22.0 µF 30.0 45.0 41.5 37.5 1.0 70 73 E3 R71VW 5220--0--

All dimensions are in mm.

Note: If the working voltage (V) is lower than the rated voltage

(VR), the capacitors may work at higher dv/dt. In this case

the maximum value allowed is obtained multiplyng the above

value (see table dv/dt) with the ratio VR/V.

The pulse characteristics K0 depends on the voltage wave-

form and in any case it cannot overcome the value given in

the above table.

* Not suitable for across-the-line applications. Please refer to

Interference Suppression Capacitors at page 145.

Table 1

Standard

packaging style

Lead

length

(mm)

Taping style Ordering

code

(Digit 10 to

11)

(mm)

Fig.

(No.)

Pitch

(mm)

AMMO-PACK

12.70

19.05

10.0/15.0

22.5

REEL Ø 355mm 12.70 2 10.0/15.0 GY

REEL Ø 500mm

12.70

19.05

10.0/15.0

22.5/27.5

Loose, short leads 04+2 AA

Loose, long leads

(p≥15mm)

30+5

25+2/-1

Note: Ammo-pack is the preferred packaging for taped

version

Mechanical version and packaging

Internal use

Tolerance: K (±10%); M (±20%)

Mechanical version and packaging

Internal use

Tolerance: K (±10%); M (±20%)

09/2008 76

R71

MKP Series

METALLIZED POLYPROPYLENE FILM

CAPACITOR

PRODUCT CODE: R71

Rated

Cap.

630Vdc/275Vac*

Std dimensions

Ø d Max

dv/dt

Max K0

Part Number

B H L p (mm) (V/µs) (V2/µs)

0.010 µF 4.0 9.0 13.0 10.0 0.6 400 504 E3 R71PF 2100--3--

0.015 µF 4.0 9.0 13.0 10.0 0.6 400 504 E3 R71PF 2150--3--

0.022 µF 4.0 9.0 13.0 10.0 0.6 400 504 E3 R71PF 2220--3--

0.033 µF 5.0 11.0 13.0 10.0 0.6 400 504 E3 R71PF 2330--0--

0.047 µF 5.0 11.0 13.0 10.0 0.6 400 504 E3 R71PF 2470--3--

0.068 µF 6.0 12.0 13.0 10.0 0.6 400 504 E3 R71PF 2680--3--

0.1 µF 6.0 12.0 13.0 10.0 0.6 400 504 E3 R71PF 3100--3-M

0.010 µF 5.0 11.0 18.0 15.0 0.6 250 315 E3 R71PI 2100--0--

0.015 µF 5.0 11.0 18.0 15.0 0.6 250 315 E3 R71PI 2150--0--

0.022 µF 5.0 11.0 18.0 15.0 0.6 250 315 E3 R71PI 2220--0--

0.033 µF 5.0 11.0 18.0 15.0 0.6 250 315 E3 R71PI 2330--0--

0.047 µF 5.0 11.0 18.0 15.0 0.6 250 315 E3 R71PI 2470--0--

0.068 µF 5.0 11.0 18.0 15.0 0.6 250 315 E3 R71PI 2680--0--

0.10 µF 5.0 11.0 18.0 15.0 0.6 250 315 E3 R71PI 3100--3--

0.15 µF 6.0 12.0 18.0 15.0 0.6 250 315 E3 R71PI 3150--3--

0.15 µF 6.0 17.5 18.0 15.0 0.6 250 315 E3 R71PI 3150--4--

0.22 µF 7.5 13.5 18.0 15.0 0.6 250 315 E3 R71PI 3220--3--

0.22 µF 6.0 17.5 18.0 15.0 0.6 250 315 E3 R71PI 3220--1--

0.22 µF 9.0 12.5 18.0 15.0 0.6 250 315 E3 R71PI 3220--2--

0.33 µF 8.5 14.5 18.0 15.0 0.6 250 315 E3 R71PI 3330--3--

0.33 µF 7.5 18.5 18.0 15.0 0.8 250 315 E3 R71PI 3330--1--

0.33 µF 9.0 12.5 18.0 15.0 0.6 250 315 E3 R71PI 3330--4-M

0.33 µF 13.0 12.0 18.0 15.0 0.8 250 315 E3 R71PI 3330--2--

0.47 µF 7.5 18.5 18.0 15.0 0.8 250 315 E3 R71PI 3470--4-M

0.47 µF 10.0 16.0 18.0 15.0 0.8 250 315 E3 R71PI 3470--3-M

0.68 µF 11.0 19.0 18.0 15.0 0.8 250 315 E3 R71PI 3680--3-M

0.15 µF 6.0 15.0 26.5 22.5 0.8 160 202 E3 R71PN 3150--0--

0.22 µF 6.0 15.0 26.5 22.5 0.8 160 202 E3 R71PN 3220--0--

0.33 µF 6.0 15.0 26.5 22.5 0.8 160 202 E3 R71PN 3330--3--

0.47 µF 7.0 16.0 26.5 22.5 0.8 160 202 E3 R71PN 3470--3--

0.68 µF 10.0 18.5 26.5 22.5 0.8 160 202 E3 R71PN 3680--3--

1.0 µF 10.0 18.5 26.5 22.5 0.8 160 202 E3 R71PN 4100--4-M

1.0 µF 11.0 20.0 26.5 22.5 0.8 160 202 E3 R71PN 4100--3--

0.68 µF 9.0 17.0 32.0 27.5 0.8 115 145 E3 R71PR 3680--0--

1.0 µF 11.0 20.0 32.0 27.5 0.8 115 145 E3 R71PR 4100--0--

1.5 µF 13.0 22.0 32.0 27.5 0.8 115 145 E3 R71PR 4150--0--

2.2 µF 14.0 28.0 32.0 27.5 0.8 115 145 E3 R71PR 4220--0--

3.3 µF 18.0 33.0 32.0 27.5 0.8 115 145 E3 R71PR 4330--0--

4.7 µF 22.0 37.0 32.0 27.5 0.8 115 145 E3 R71PR 4470--0--

1.5 µF 11.0 22.0 41.5 37.5 1.0 80 100 E3 R71PW 4150--0--

2.2 µF 13.0 24.0 41.5 37.5 1.0 80 100 E3 R71PW 4220--0--

3.3 µF 16.0 28.5 41.5 37.5 1.0 80 100 E3 R71PW 4330--0--

4.7 µF 19.0 32.0 41.5 37.5 1.0 80 100 E3 R71PW 4470--0--

6.8 µF 20.0 40.0 41.5 37.5 1.0 80 100 E3 R71PW 4680--0--

10.0 µF 24.0 44.0 41.5 37.5 1.0 80 100 E3 R71PW 5100--0--

15.0 µF 30.0 45.0 41.5 37.5 1.0 80 100 E3 R71PW 5150--0--

Mechanical version and packaging (table 1)

Internal use

Tolerance: K (±10%); M (±20%)

All dimensions are in mm.

Note: If the working voltage (V) is lower than the rated voltage

(VR), the capacitors may work at higher dv/dt. In this case

the maximum value allowed is obtained multiplyng the

above value (see table dv/dt) with the ratio VR/V.

The pulse characteristics K0 depends on the voltage wave-

form and in any case it cannot overcome the value given

in the above table.

* Not suitable for across-the-line applications. Please refer

to Interference Suppression Capacitors at page 145.

Rated

Cap.

1000Vdc/275Vac*

Std dimensions

Ø d Max

dv/dt

Max K0

Part Number

B H L p (mm) (V/µs) (V2/µs)

0.22 µF 9.0 17.0 32.0 27.5 0.8 180 360 E3 R71QR3220--0--

0.27 µF 9.0 17.0 32.0 27.5 0.8 180 360 E3 R71QR3270--0--

0.33 µF 9.0 17.0 32.0 27.5 0.8 180 360 E3 R71QR3330--1--

0.33 µF 11.0 20.0 32.0 27.5 0.8 180 360 E3 R71QR3330--0--

0.39 µF 9.0 17.0 32.0 27.5 0.8 180 360 E3 R71QR3390--1--

0.39 µF 11.0 20.0 32.0 27.5 0.8 180 360 E3 R71QR3390--0--

0.47 µF 9.0 17.0 32.0 27.5 0.8 180 360 E3 R71QR3470--1--

0.47 µF 13.0 22.0 32.0 27.5 0.8 180 360 E3 R71QR3470--0--

0.56 µF 9.0 17.0 32.0 27.5 0.8 180 360 E3 R71QR3560--1--

0.56 µF 13.0 22.0 32.0 27.5 0.8 180 360 E3 R71QR3560--0--

0.68 µF 11.0 20.0 32.0 27.5 0.8 180 360 E3 R71QR3680--1--

0.68 µF 14.0 28.0 32.0 27.5 0.8 180 360 E3 R71QR3680--0--

0.82 µF 11.0 20.0 32.0 27.5 0.8 180 360 E3 R71QR3820--1--

0.82 µF 14.0 28.0 32.0 27.5 0.8 180 360 E3 R71QR3820--0--

1.0 µF 13.0 22.0 32.0 27.5 0.8 180 360 E3 R71QR4100--1--

1.0 µF 18.0 33.0 32.0 27.5 0.8 180 360 E3 R71QR4100--0--

1.2 µF 13.0 25.0 32.0 27.5 0.8 180 360 E3 R71QR4120--1--

1.2 µF 18.0 33.0 32.0 27.5 0.8 180 360 E3 R71QR4120--0--

1.5 µF 14.0 28.0 32.0 27.5 0.8 180 360 E3 R71QR4150--1--

1.5 µF 18.0 33.0 32.0 27.5 0.8 180 360 E3 R71QR4150--0--

1.8 µF 14.0 28.0 32.0 27.5 0.8 180 360 E3 R71QR4180--1--

1.8 µF 22.0 37.0 32.0 27.5 0.8 180 360 E3 R71QR4180--0--

2.2 µF 18.0 33.0 32.0 27.5 0.8 180 360 E3 R71QR4220--1--

2.2 µF 22.0 37.0 32.0 27.5 0.8 180 360 E3 R71QR4220--0--

2.7 µF 18.0 33.0 32.0 27.5 0.8 180 360 E3 R71QR4270--1--

3.3 µF 22.0 37.0 32.0 27.5 0.8 180 360 E3 R71QR4330--1--

3.9 µF 22.0 37.0 32.0 27.5 0.8 180 360 E3 R71QR4390--1--

0.68 µF 11.0 22.0 41.5 37.5 1.0 150 300 E3 R71QW3680--0--

0.82 µF 13.0 24.0 41.5 37.5 1.0 150 300 E3 R71QW3820--0--

1.0 µF 11.0 22.0 41.5 37.5 1.0 150 300 E3 R71QW4100--1--

1.0 µF 13.0 24.0 41.5 37.5 1.0 150 300 E3 R71QW4100--0--

1.2 µF 11.0 22.0 41.5 37.5 1.0 150 300 E3 R71QW4120--1--

1.2 µF 16.0 28.5 41.5 37.5 1.0 150 300 E3 R71QW4120--0--

1.5 µF 11.0 22.0 41.5 37.5 1.0 150 300 E3 R71QW4150--1--

1.5 µF 16.0 28.5 41.5 37.5 1.0 150 300 E3 R71QW4150--0--

1.8 µF 13.0 24.0 41.5 37.5 1.0 150 300 E3 R71QW4180--1--

1.8 µF 19.0 32.0 41.5 37.5 1.0 150 300 E3 R71QW4180--0--

2.2 µF 16.0 28.5 41.5 37.5 1.0 120 240 E3 R71QW4220--1--

2.2 µF 19.0 32.0 41.5 37.5 1.0 120 240 E3 R71QW4220--0--

2.7 µF 16.0 28.5 41.5 37.5 1.0 120 240 E3 R71QW4270--1--

2.7 µF 20.0 40.0 41.5 37.5 1.0 120 240 E3 R71QW4270--0--

3.3 µF 19.0 32.0 41.5 37.5 1.0 120 240 E3 R71QW4330--1--

3.3 µF 24.0 44.0 41.5 37.5 1.0 120 240 E3 R71QW4330--0--

3.9 µF 19.0 32.0 41.5 37.5 1.0 120 240 E3 R71QW4390--1--

3.9 µF 24.0 44.0 41.5 37.5 1.0 120 240 E3 R71QW4390--0--

4.7 µF 20.0 40.0 41.5 37.5 1.0 80 160 E3 R71QW4470--1--

4.7 µF 24.0 44.0 41.5 37.5 1.0 80 160 E3 R71QW4470--0--

5.6 µF 20.0 40.0 41.5 37.5 1.0 80 160 E3 R71QW4560--1--

5.6 µF 30.0 45.0 41.5 37.5 1.0 80 160 E3 R71QW4560--0--

6.8 µF 24.0 44.0 41.5 37.5 1.0 80 160 E3 R71QW4680--1--

8.2 µF 24.0 44.0 41.5 37.5 1.0 80 160 E3 R71QW4820--1--

10.0 µF 30.0 45.0 41.5 37.5 1.0 80 160 E3 R71QW5100--1--

Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%); M (±20%)

09/2008

R71

MKP Series

METALLIZED POLYPROPYLENE FILM

CAPACITOR

MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)

Note: p (pitch) in mm.

09/2008 78

MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)

Note: p (pitch) in mm.

R71

MKP Series

METALLIZED POLYPROPYLENE FILM

CAPACITOR

Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –

and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who

have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise

provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.