Light Touch Switches/EVQP4 6.2 mmx2.5 mm Side-operational Edge Mount Light Touch Switches Type: EVQP4 Features External dimensions : 6.2 mmx 2.55 mm (Excluding the push plate), Height 3.5 mm (Printed circuit board being as low as 1.35 mm) Side-operational Middle Travel ( 0.7 mm ) with a high operating force (5.0 N) Improved soldering strength in the operating direction when mounted on PC board edge Recommended Applications Operation switches for portable electronic equipment (Mobile phones, Digital still cameras, Camcorders Portable audio players, etc.) Keyless entry (car electronics) Car audio equipment Explanation of Part Numbers 1 2 3 Product Code 4 5 6 7 8 B 3 Operating Force Type 9 Push Plate Color Specifications Travel Type Middle Travel Type Short Travel Snap action / Push-on type SPST Rating 10 A 2 V DC to 20 mA 15 V DC (Resistive load) Contact Resistance 100 m max. Insulation Resistance Electrical 100 M min. (at 100 V DC) Dielectric Withstanding Voltage 250 V AC for 1 minute Bouncing Operating Force Mechanical Travel 10 ms max. (ON, OFF) 2.5 N, 3.5 N, 5.0 N 0.70 mm0.2 mm Push Strength Endurance Operating Life 1.0 N, 1.6 N, 2.4 N, 3.5 N 0.25 mm +0.05 -0.15 mm 50 N (1 minute) 2.5 N:1,000,000 cycles min. 3.5 N: 500,000 cycles min. 5.0 N: 200,000 cycles min. Operating Temperature 1.0 N, 1.6 N: 1,000,000 cycles min. 2.4 N: 500,000 cycles min. 3.5 N: 200,000 cycles min. -40 C to +85 C -40 C to +85 C (Bulk) -20 C to +60 C (Taping) Storage Temperature Minimum Quantity/Packing Unit 2,500 pcs. Embossed Taping (Reel Pack) Quantity/Carton 12,500 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2017.03 industrial.panasonic.com/ac/e/ -1- Panasonic Corporation 2017 ANCTB27E 201703-Fd Light Touch Switches/EVQP4 Dimensions in mm (not to scale) No. 1 General dimension tolerance : 0.2 ( )dimensions are reference dimensions. 2.70.1 2.55 EVQP4 Middle travel 2 1 6.00.1 2 P.W.B. 4 4 _0 5.1+0.1 x. ma .5 0.05 max. 0 0.3 max. R 5.80.1 7.00.1 1.650.1 1.250.1 0.450.1 5.70.1 _0 6.2 +0.4 2 0.3 max. 0.1 max. 0.40.2 1.350.1 _0.1 3.5 +0.2 3 _0.1 2.5 +0.2 _0.1 3.4 +0.2 4.80.1 3.10.1 1 3.10.1 1 3 2.050.1 1. 8 Circuit diagram PWB land pattern for reference Height from surface of PCB : 1.35 mm Part Numbers Operating Force Height Push Plate Color Operating Life EVQP4HB3B 2.5 N 3.5 mm Blue 1,000,000 cycles EVQP4KB3Q 3.5 N 3.5 mm Gray 500,000 cycles EVQP4MB3K 5.0 N 3.5 mm Black 200,000 cycles No. 2 General dimension tolerance : 0.2 ( )dimensions are reference dimensions. 2.70.1 EVQP4 2 1 2.55 Short travel 2 Circuit diagram 1 6.00.1 P.W.B. 2 2 3 4 _0 5.1+0.1 x. ma 0.05 max. .5 0 0.3 max. R 5.80.1 7.00.1 1.650.1 1.250.1 0.450.1 +0.2 3.0 _0.1 +0.2 2.1 _0.1 2.6 4.80.1 5.70.1 _0 6.2 +0.4 3.10.1 3.10.1 2.050.1 1 0.3 max. 0.1 max. 1.350.1 _0.1 3.5 +0.2 0.40.2 4 1.6 3 PWB land pattern for reference Height from surface of PCB : 1.35 mm Part Numbers Operating Force Height Push Plate Color Operating Life EVQP40B3M 1.0 N 3.5 mm Natural 1,000,000 cycles EVQP42B3M 1.6 N 3.5 mm Natural 1,000,000 cycles EVQP44B3M 2.4 N 3.5 mm Natural 500,000 cycles EVQP46B3M 3.5 N 3.5 mm Natural 200,000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ -2- Panasonic Corporation 2017 ANCTB27E 201703-Fd Light Touch Switches/EVQP4 Recommended Reflow Soldering Conditions Operation Top (C) MAX. 260 Fan or Normal Temp. 230 180 150 (Normal Temp.) 9030 4010 Soldering Time (s) Embossed Carrier Taping Tape width=12.0 mm t1 Feeding hole Chip pocket P2 P0 E D0 B t2 Chip component Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity specified in the specifications should be secured. Peeling off strength of top tape : It should be within 0.2N to 1.0N at 165 degree in peeling off angle. Joint of carrier tape : One joint per one reel may exist. F W A P1 Tape running direction Unit: mm Part No. EVQP4 Height 3.5 A 6.50.2 B 3.90.2 W 12.00.3 F E 5.50.1 1.750.10 P1 P2 8.00.1 2.00.1 P0 4.00.1 D0 Dia. 1.5 +0.1 -0 t1 t2 0.40.1 3.750.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ -3- Panasonic Corporation 2017 ANCTB27E 201703-Fd