DO NOT
SCALE FROM
THIS PRINT
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
No OF POSITIONS
OPTION
-GP: GUIDE POST
(SEE FIG. 8, SHT 5)
(ONLY AVAILABLE WITH -02.0 LEAD
STYLE, 4 & 6 ROW, 20, 30, 40, &
50 POSITION)
**-EP: EXTENDED GUIDE POST
(SEE FIG. 10, SHT 5)
(ONLY AVAILABLE WITH -02.0& -03.5
LEAD STYLE, 20, 30, 40, & 50 POSITION)
LEAD STYLE
-02.0 (SEE TABLE 1&2)
-03.0(SEE TABLE 1&2)
-03.5(SEE TABLE 1&2)
-06.5 (SEE TABLE 9 &10)
-07.0 (SEE TABLE 9 &10)
-09.0 (SEE TABLE 9 &10)
-11.0 (SEE TABLE 9 &10)
-13.0 (SEE TABLE 9 &10)
-1: 63% TIN / 37% LEAD
CHARGE TAIL
(USE SUB-T-1M3X-XX.X-X-1)
-2: 95.5% TIN / 3.8% SILVER /
.7% COPPER CHARGE TAIL
(USE SUB-T-1M3X-XX.X-X-2)
SOLDER COMPOSITION & STYLE
-04: 4 ROWS (SEE FIG 13, SHT 6)
(NOT AVAILABLE IN -13.0 LEAD STYLE)
-05: 5 ROWS (SEE FIG. 7, SHT 4)
-06: 6 ROWS (SEE FIG. 6, SHT 4)
-08: 8 ROWS (SEE FIG. 1)
-10: 10 ROWS
(SEE FIG. 2, SHT 2)
ROW
*
***-10,*****-15,****-19 -20,
******-25, -30, -40, -50
(PER ROW)
ALIGNMENT PIN
(SEE FIG. 3, SHT 2)
(NOT AVAILABLE WITH -19 POSITION)
(SEE NOTE 7)
POLYIMIDE PAD
(SEE FIG. 4, SHT 2)
(SEE NOTE 8)
DOT APPLICATOR-KAPTON TAPE.
-04 ROW: USE K-DOT-.138-.250-.005
-05/-06 ROW: USE K-DOT-.236-.343-.005
-08 ROW: USE K-DOT-.325-.450-.005
-10 ROW: USE K-DOT-.404-.500-.005
-L: LIGHT GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-L-X)
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-L-X)
-SM: SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-S-X
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-S-X))
-S: SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-S-X)
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-S-X)
PLATING SPECIFICATION
TAPE & REEL
(SEE NOTES 9, 10 & 11)
AN
*
= NOT TOOLED
**
= NOT RELEASED FOR PRODUCTION
***
=
10 POSITION ONLY AVAILABLE
IN 4 ROW
****
= ONLY AVAILABLE WITH -03.5 LEAD
STYLE & 6 ROW
*****
= ONLY AVAILABLE IN A 10 ROW
= ONLY AVAILABLE IN 8 & 10 ROW
******
= ONLY AVAILABLE WITH -03.5 LEAD
STYLE & 4 ROW
(REF)
"E"
REF
"A"
(REF)
"C"
.060 1.52
REF
.035
REF
0.89
(REF)
'F"
"B"
REF
"G"
REF (TYP)
"H"
.0500
(TYP)
1.270
.123 3.12
REF
"A"
"A"
FIG. 1
-08: 8 ROW
(SEAM-30-02.0-XX-08-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
C
C
C
L
C
L
PIN 08
PIN 01
"J" REF
.040 1.02
REF
"D" (TYP)
.050
(TYP)
1.27
'B'
CC
SEAM-XX-XX.X-8
C
L
C
L
C
L
.004
0.10
(SEE NOTE 6)
"T"
(SEE NOTE 6)
DETAIL 'B'
SCALE 7 : 1
C
C
"U"
PATENT NUMBER
7172438
C
* = NOT TOOLED
(SEE SHEET 3 FOR LEAD STYLES -06.5 THRU -13.0)
(SEE SHEET 3 FOR LEAD STYLES -06.5 THRU -13.0)
AN
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.050 PITCH TERMINAL ARRAY ASSEMBLY
BY:
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
06/02/2004
6
1
SHEET SCALE: 2:1
INSULATOR: LCP, COLOR: BLACK
TERMINAL: COPPER ALLOY
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 0.75 LBS.
3. NOTE DELETED.
4. 5 ROW SOLDER TAILS ARE NOT SYMMETRICAL WITH BODY WIDTH
(.378[9.60]); SEE FIG. 7, SHEET 4.
5. C18 TO BE INSPECTED OPTICALLY WHILE FOCUSED ON THIS SURFACE.
6. DIMENSION TO BE MEASURED IN ALL FOUR CORNERS.
7. WITHOUT -A AVAILABLE FOR EXISTING CUSTOMERS ONLY AS OF
REVISION AD.
8. POLYIMIDE PAD WILL BE SUPPLIED WHETHER OR NOT -K IS SPECIFIED.
9. TAPE & REEL WILL BE SUPPLIED WHETHER OR NOT -TR IS SPECIFIED.
10. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL
BE SUPPLIED. FOR QUANTITIES 50 - 124, NO LEADER OR TRAILER WILL
BE SUPPLIED.
11. ATTACH LABEL "SEAX-0001" TO EACH TAPE & REEL PACKAGE.
12. SEE RECOMMENDED FOOTPRINT DRAWING FOR STENCIL
REQUIREMENTS.
13. SOLDER CHARGE VOLUME IS 0.891 x 10^-5 IN ^3 REF.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION AN
.044
REF
1.12
.034 0.86
REF
"E"
REF
"F"
REF
"G"
REF (TYP)
"H"
FIG. 2
-10: 10 ROW
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-02.0-XX-10-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
C
L
C
L
PIN 10
PIN 01
.044
REF (TYP)
1.12
.045 1.14
REF (TYP)
.044 1.12
.034 0.86
.040 1.02
REF
.050 1.27
REF
(REF)
"K"
-A: ALIGNMENT PINS
APPLIES TO ALL -A OPTION PART NUMBERS
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-02.0-XX-08-1-A-XX-K-TR SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
FIG. 3
"T"
REF
'C'
C
L
"M"=(("A"(SEE TABLE 3)-"N")/2)
+
.020
"N"
"S"
.020[0.51]
"M"
.020[0.51]
FIG. 4
-K: POLYIMIDE PAD
(SEAM-30-02.0-XX-08-1-A-XX-K-TR SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(ALL CONTACTS NOT SHOWN FOR CLARITY)
C
L
C
L
(INCL. POLYIMIDE FILM)
"L"
.056
±.003
1.42
±0.08
.050
REF
1.27
.056
-
.004
+
.002 1.42
-
0.10
+
0.05
(TYP)
.044
(TYP)
1.12
.028 0.72
REF
.016
±.003
0.40
±0.08
(TYP)
.011 0.28
REF
SECTION "A"-"A"
SCALE 4 : 1
SUB-T-1M36-XX.X-X-X
C
C
C
C
L
SOLDER CHARGE
.034 0.86
.044
REF
1.12
DETAIL 'C'
SCALE 4 : 1
DETAIL 'C'
ALTERNATE CONSTRUCTION
* = NOT TOOLED
SHEET OF
.050 PITCH TERMINAL ARRAY ASSEMBLY
BY:
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
06/02/2004
6
2
SHEET SCALE: 2:1
REVISION AN
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
(REF)
"A"
(REF)
"F"
(REF) (TYP)
"H"
"C" (REF)
(REF)
"R"
(REF)
"G"
"B"
.050 1.27
C
L
C
L
C
PIN 01
PIN 08
C
"D" (TYP)
(REF)
"Q"
.050 1.27
SEAM-30-00.1-XX-X
SEAM-S-30-XX.X-XX-X
SUB-T-1M38-XX.X-X-X
C
L
C
L
.050
(REF)
1.27
.056 1.42
"P"
.016
±.003
0.41
±0.08
TYP
.044
(TYP)
1.12
'D'
SEAM-S-XX-XX.X-08-X
SEAM-XX-00.1-X
C
LC
L
C
SCALE 3.5:1
C
C
.028 0.72
.011 0.28
REF
.053
-
.003
+
.002 1.35
-
0.08
+
0.05
.055
±.002
1.41
±0.05
DETAIL 'D'
SCALE 8 : 1
SEE NOTE 5
C
'H'
DETAIL 'H'
SCALE 16 : 1
.0088
±.0008
0.224
±0.020
C
.007 0.18
REF
-07.0 LEAD STYLE
(SEAM-XX-07.0-X-08-A-X SHOWN)
* = NOT TOOLED
-06.5 THRU -13.0 LEAD STYLES
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-09.0-XX-08-X-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
FIG. 5
CC
C
L
* = NOT TOOLED
AN
SHEET OF
.050 PITCH TERMINAL ARRAY ASSEMBLY
BY:
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
06/02/2004
6
3
SHEET SCALE: 2:1
REVISION AN
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REF
"E"
REF
"F"
.040
REF
1.02
.030
REF
0.76
"G" REF
"H" REF (TYP)
C
L
C
L
PIN 06
PIN 01
SEAM-XX-XX.X-06-X
-06: 6 ROWS
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-06-X-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
FIG. 6
REF
"E"
REF
"F"
.040
REF
1.02
.030
REF
0.76
"G" REF
"H" REF (TYP)
FIG. 7
-05: 5 ROWS
(SAME AS FIG. 6, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-05-X-A-XX-K-TR SHOWN)
(SEE NOTE 4)
C
L
C
L
PIN 05
PIN 01
SEAM-XX-XX.X-05-X
"F"
"F"
.378
REF
9.60
(SEE NOTE 4)
.072 1.83
(SEE NOTE 4)
.128 3.25
(SEE NOTE 4)
SECTION "F"-"F"
SHEET OF
.050 PITCH TERMINAL ARRAY ASSEMBLY
BY:
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
06/02/2004
6
4
SHEET SCALE: 3:1
REVISION AN
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.059 1.49
.324 8.22
REF
.120 3.05
REF
.010 0.25
REF
.070
REF
1.78
.498 12.65
REF
.320 8.13
.020
SQ. REF (TYP)
0.51
"W"
-
.008
+
.005
2
MAX SWAY
(TYP)
WT-42-01-T
C
C
C
"V"
REF
.218 5.54
REF
SEAM-XX-02.0-XX-X-GP
2.246 57.05
REF
.180 4.57
REF
.285 7.24
REF
.117
SQ. REF (TYP)
2.97
"x"
R
.060 1.52
REF
"Y"
WT-58-XX-X
SEAM-XX-03.5-XX-X-EP
C
FIG. 8
-GP: GUIDE POST OPTION
(ONLY AVAILABLE WITH -02.0 LEAD STYLE, 4 & 6 ROW, 20, 30, 40, & 50 POSITIONS)
(MATES WITH SEAF RIGHT ANGLE ONLY)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-06-2-A-GP-K-TR SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
FIG. 10
-EP: EXTENDED GUIDE POST OPTION
(ONLY AVAILABLE WITH -02.0 & -03.5 LEAD STYLES, 4 & 6 ROW,
20, 30, 40, & 50 POSITIONS)
(SAME AS FIG. 8, EXCEPT AS SHOWN)
(SEAM-20-03.5-XX-06-2-A-EP-K-TR SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
SHEET OF
.050 PITCH TERMINAL ARRAY ASSEMBLY
BY:
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
06/02/2004
6
5
SHEET SCALE: 2:1
REVISION AN
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
"E"
REF
"F"
REF
"G"
REF
"H"
REF
PIN 1
PIN 4
FIG. 9
-04: 4 ROW
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-04-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
SHEET OF
.050 PITCH TERMINAL ARRAY ASSEMBLY
BY:
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
06/02/2004
6
6
SHEET SCALE:4:1
REVISION AN
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
