Raychem Thermofit Division Europe Specification Control Drawing a) Part as supplied. Li HOT~MELT ADHESIVE - A DIA + b) Part after unrestriated recovery. CONDUCTIVE HOT-MELT ADHESIVE atects ateatacts 1 alent. 1 O O | : '( BSG w ww aww ( H i See over for Part Numbering System Li , JoK T KITS TO INCLUDE CLEANING TISSUE, Js DIA | HEAT RECOVERABLE SCREEN 4 PIECE 100 GRIT EMERY CLOTH & 1 PIECE OF ATUM. KIT TO BE USED IN CONJUNCTION WITH TCFS INSTALLATION PROCEDURE . Dimensions (in millimetres) A Jk Js A/F L Pk Ps Jok Jos PART No. min min max min max THREAD Nut NOM 10% +10% Ref Ref a Db a b fs) i) D b TCFS-12 7.4 44 5.7 7 5.0 M12 17 24 49 50 9 415 TCFS-16 10.4 45 6.0 g 6.0 M16 22 29 56 65 412 17 TCFS-20 14.1 19 7.2 44 7.2 M20 27 34 60 77 417 20 TCFS-24 19.4 23 8.5 417 8.5 M24 30 38 73 90 20 25 TCFS-30 24.1 29g 10.0 24 10.0 M30 36 47 72 145 24 30 TCFS-36 30.1 35 15.8 2g 15.8 M36 41 52 103 140 39 30 Copyright (!} Urheberrechte The copyright in this drawing is the property of Raychem Ltd. The drawing is issued on condition that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Raychem Ltd. Drawn D.MURRAY Checked aT Approval Design MKTG, AAS. WW Issue Q.A. ae 5 Date May 1996 Conforms to ISO Recommendations 3rd Angle Projection Not to Scale f=H 1-100CHIss. Date EA Details of Change eC |October 1991 |H0044 L was 4% 3 |November 1991 ]H0044 Pk WAS 39 ON S/S te 4 |November 1992)H0125 S/S 30 L WAS 48 5 |May 1996 H0295 S/S Pk WAS 37 Material (-100) ZERO HALOGEN Part Numbering System. TCFS-%#-1**-100CH THREAD LENGTH (20mm standard) (45mm increments) FEEDTHROUGH MATERIAL/FINISH 4198 Aluminium alloy plated cadmium olive drab over electroless nickel 419C Aluminium alloy plated electroless nickel 62C Stainless steel] plated electroless nickel FEEDTHROUGH SIZE Raychem Thermofit Division, Europe, Swindon, Wiltshire, England. Telephone: (0793) 528174 Fax: 573923