Miniature Basic Switch D3V Reliable Basic Switch with External Lever * Available by 0.1 A, 6 A, 11 A, 16 A and 21 A models, all with self-cleaning contacts. 0.1 A utilizes gold alloy crossbar contacts for high reliability at low loads. * Available with internally or externally fitted levers, and 2 fixing positions for external levers. * Conforms to EN61058-1 UL1054. * Right-angle plunger option available in some models. * RoHS Compliant. Ordering Information Model Number Legend D3V-@@@@-@@@-@-@ 1 2 3 4 5 6 7 8 9 1. Ratings 21: 20 (4) A at 250 VAC 16: 16 (3) A at 250 VAC 11: 11 (3) A at 250 VAC 6: 6 (2) A at 250 VAC 01: 0.1 A at 125 VAC 2. Contact Gap None: 1 mm (F gap) G: 0.5 mm (G gap) 3. Actuator None: Pin plunger 1: Short hinge lever 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Short hinge roller lever 6: Hinge roller lever 4. Hinge Position None: Internal/Far from plunger M: External/Far from plunger K: External/Near plunger 5. Contact Form 1: SPDT 2: SPST-NC 3: SPST-NO 6. Terminals A: Solder/quick-connect terminal (#187) C2: Quick-connect terminal (#187) C: Quick-connect terminal (#250) (optional without surge creepage tab flush around terminals.) 7. Maximum Operating Force 5: 1.96 N {200 gf} 4A: 1.23 N {125 gf} 4: 0.98 N {100 gf} 3: 0.49 N {50 gf} 2: 0.25 N {25 gf} Note: These values are for the plunger models. 8. Mounting Hole Size None: 3.1 mm K: 2.9 mm 9. Special Code None: Standard H: High temperature (125 C) E: Special rating: 21 (8) A T: High temperature (200 C) Miniature Basic Switch D3V 1 Available Combinations Model D3V-21 Rated current OF D3V-16 D3V-11 D3V-6 D3V-01 16 A 11 A 6A 0.1 A 21 A 1.23 N {125 gf} 1.96 N {200 gf} 0.98 N {100 gf} 1.96 N {200 gf} 0.98 N {100 gf} Heat resistance Contact G F G F/G F G F gap 0.5 mm 1 mm 0.5 mm 1 mm or 1 mm 0.5 mm 1 mm 0.5 mm Terminals Standard (85 C) #187 G 0.5 mm 0.49 N {50 gf} 1.96 N {200 gf} 0.98 N {100 gf} G F/G F 0.5 mm 1 mm or 1 mm 0.5 mm G 0.5 mm 0.49 N {50 gf} 0.49 N 0.25 N {50 gf} {25 gf} G 0.5 mm F 1 mm F 1 mm #250 #187 #250 High temperature (125 C) #187 #250 High temperature (200 C) #187 #250 Standard (105 C) Note: 1. : Standard : Semi-standard 2. Consult OMRON for specific models with standard approval. List of Models 21 A (OF: 1.23 N {125 gf}) Actuator Hinge position (far from plunger) Contact form SPST-NC SPST-NO Plunger --- D3V-21G-1@4A- D3V-21G-2@4A- D3V-21G-3@4A- Short hinge lever Internal D3V-21G1-1@4A- D3V-21G1-2@4A- D3V-21G1-3@4A- External (M) D3V-21G1M-1@4A- D3V-21G1M-2@4A- D3V-21G1M-3@4A- Internal D3V-21G2-1@4A- D3V-21G2-2@4A- D3V-21G2-3@4A- External (M) D3V-21G2M-1@4A- D3V-21G2M-2@4A- D3V-21G2M-3@4A- Internal D3V-21G3-1@4A- D3V-21G3-2@4A- D3V-21G3-3@4A- External (M) D3V-21G3M-1@4A- D3V-21G3M-2@4A- D3V-21G3M-3@4A- Internal D3V-21G4-1@4A- D3V-21G4-2@4A- D3V-21G4-3@4A- External (M) D3V-21G4M-1@4A- D3V-21G4M-2@4A- D3V-21G4M-3@4A- Internal D3V-21G5-1@4A- D3V-21G5-2@4A- D3V-21G5-3@4A- External (M) D3V-21G5M-1@4A- D3V-21G5M-2@4A- D3V-21G5M-3@4A- Internal D3V-21G6-1@4A- D3V-21G6-2@4A- D3V-21G6-3@4A- External (M) D3V-21G6M-1@4A- D3V-21G6M-2@4A- D3V-21G6M-3@4A- Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever SPDT 16 A (OF: 1.96 N {200 gf}) Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Plunger --- D3V-16-1@5- D3V-16-2@5- D3V-16-3@5- Short hinge lever Internal D3V-161-1@5- D3V-161-2@5- D3V-161-3@5- External (M) D3V-161M-1@5- D3V-161M-2@5- D3V-161M-3@5- 2 Miniature Basic Switch D3V Actuator Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Internal D3V-162-1@5- D3V-162-2@5- D3V-162-3@5- External (M) D3V-162M-1@5- D3V-162M-2@5- D3V-162M-3@5- Internal D3V-163-1@5- D3V-163-2@5- D3V-163-3@5- External (M) D3V-163M-1@5- D3V-163M-2@5- D3V-163M-3@5- Internal D3V-164-1@5- D3V-164-2@5- D3V-164-3@5- External (M) D3V-164M-1@5- D3V-164M-2@5- D3V-164M-3@5- Internal D3V-165-1@5- D3V-165-2@5- D3V-165-3@5- External (M) D3V-165M-1@5- D3V-165M-2@5- D3V-165M-3@5- Internal D3V-166-1@5- D3V-166-2@5- D3V-166-3@5- External (M) D3V-166M-1@5- D3V-166M-2@5- D3V-166M-3@5- 16 A (OF: 0.98 N {100 gf}) Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Plunger --- D3V-16-1@4- D3V-16-2@4- D3V-16-3@4- Short hinge lever Internal D3V-161-1@4- D3V-161-2@4- D3V-161-3@4- External (M) D3V-161M-1@4- D3V-161M-2@4- D3V-161M-3@4- Internal D3V-162-1@4- D3V-162-2@4- D3V-162-3@4- External (M) D3V-162M-1@4- D3V-162M-2@4- D3V-162M-3@4- Internal D3V-163-1@4- D3V-163-2@4- D3V-163-3@4- External (M) D3V-163M-1@4- D3V-163M-2@4- D3V-163M-3@4- Internal D3V-164-1@4- D3V-164-2@4- D3V-164-3@4- External (M) D3V-164M-1@4- D3V-164M-2@4- D3V-164M-3@4- Internal D3V-165-1@4- D3V-165-2@4- D3V-165-3@4- External (M) D3V-165M-1@4- D3V-165M-2@4- D3V-165M-3@4- Internal D3V-166-1@4- D3V-166-2@4- D3V-166-3@4- External (M) D3V-166M-1@4- D3V-166M-2@4- D3V-166M-3@4- Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever 11 A (OF: 1.96 N {200 gf}) Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Plunger --- D3V-11-1@5- D3V-11-2@5- D3V-11-3@5- Short hinge lever Internal D3V-111-1@5- D3V-111-2@5- D3V-111-3@5- External (M) D3V-111M-1@5- D3V-111M-2@5- D3V-111M-3@5- Internal D3V-112-1@5- D3V-112-2@5- D3V-112-3@5- External (M) D3V-112M-1@5- D3V-112M-2@5- D3V-112M-3@5- Internal D3V-113-1@5- D3V-113-2@5- D3V-113-3@5- External (M) D3V-113M-1@5- D3V-113M-2@5- D3V-113M-3@5- Internal D3V-114-1@5- D3V-114-2@5- D3V-114-3@5- External (M) D3V-114M-1@5- D3V-114M-2@5- D3V-114M-3@5- Internal D3V-115-1@5- D3V-115-2@5- D3V-115-3@5- External (M) D3V-115M-1@5- D3V-115M-2@5- D3V-115M-3@5- Internal D3V-116-1@5- D3V-116-2@5- D3V-116-3@5- External (M) D3V-116M-1@5- D3V-116M-2@5- D3V-116M-3@5- Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever Note: The @ in the model number is for the terminal code. A: Solder/quick-connect terminals (#187) C2: Quick-connect terminals (#187) C: Quick-connect terminals (#250) The in the model number is for the mounting hole size. None: 3.1 mm K: 2.9 mm Miniature Basic Switch D3V 3 11 A (OF: 0.98 N {100 gf}) Actuator Hinge position (far from plunger) --- Plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever Contact form SPDT SPST-NC SPST-NO D3V-11-1@4- D3V-11-2@4- D3V-11-3@4- D3V-111-3@4- Internal D3V-111-1@4- D3V-111-2@4- External (M) D3V-111M-1@4- D3V-111M-2@4- D3V-111M-3@4- Internal D3V-112-1@4- D3V-112-2@4- D3V-112-3@4- External (M) D3V-112M-1@4- D3V-112M-2@4- D3V-112M-3@4- Internal D3V-113-1@4- D3V-113-2@4- D3V-113-3@4- External (M) D3V-113M-1@4- D3V-113M-2@4- D3V-113M-3@4- D3V-114-3@4- Internal D3V-114-1@4- D3V-114-2@4- External (M) D3V-114M-1@4- D3V-114M-2@4- D3V-114M-3@4- Internal D3V-115-1@4- D3V-115-2@4- D3V-115-3@4- External (M) D3V-115M-1@4- D3V-115M-2@4- D3V-115M-3@4- Internal D3V-116-1@4- D3V-116-2@4- D3V-116-3@4- External (M) D3V-116M-1@4- D3V-116M-2@4- D3V-116M-3@4- 11 A (OF: 0.49 N {50 gf}) Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Plunger --- D3V-11G-1@3- D3V-11G-2@4- D3V-11G-3@3- Short hinge lever Internal D3V-11G1-1@3- D3V-11G1-2@4- D3V-11G1-3@3- External (M) D3V-11G1M-1@3- D3V-11G1M-2@3- D3V-11G1M-3@3- Internal D3V-11G2-1@3- D3V-11G2-2@3- D3V-11G2-3@3- External (M) D3V-11G2M-1@3- D3V-11G2M-2@3- D3V-11G2M-3@3- Internal D3V-11G3-1@3- D3V-11G3-2@3- D3V-11G3-3@3- External (M) D3V-11G3M-1@3- D3V-11G3M-2@3- D3V-11G3M-3@3- Internal D3V-11G4-1@3- D3V-11G4-2@3- D3V-11G4-3@3- External (M) D3V-11G4M-1@3- D3V-11G4M-2@3- D3V-11G4M-3@3- Internal D3V-11G5-1@3- D3V-11G5-2@3- D3V-11G5-3@3- External (M) D3V-11G5M-1@3- D3V-11G5M-2@3- D3V-11G5M-3@3- Internal D3V-11G6-1@3- D3V-11G6-2@3- D3V-11G6-3@3- External (M) D3V-11G6M-1@3- D3V-11G6M-2@3- D3V-11G6M-3@3- Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever 6 A (OF: 0.98 N {100 gf}) Actuator Hinge position (far from plunger) --- Plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever D3V-6-1@4- SPST-NC D3V-6-2@4- SPST-NO D3V-6-3@4- Internal D3V-61-1@4- D3V-61-2@4- D3V-61-3@4- External (M) D3V-61M-1@4- D3V-61M-2@4- D3V-61M-3@4- Internal D3V-62-1@4- D3V-62-2@4- D3V-62-3@4- External (M) D3V-62M-1@4- D3V-62M-2@4- D3V-62M-3@4- Internal D3V-63-1@4- D3V-63-2@4- D3V-63-3@4- External (M) D3V-63M-1@4- D3V-63M-2@4- D3V-63M-3@4- Internal D3V-64-1@4- D3V-64-2@4- D3V-64-3@4- External (M) D3V-64M-1@4- D3V-64M-2@4- D3V-64M-3@4- Internal D3V-65-1@4- D3V-65-2@4- D3V-65-3@4- External (M) D3V-65M-1@4- D3V-65M-2@4- D3V-65M-3@4- Internal D3V-66-1@4- D3V-66-2@4- D3V-66-3@4- External (M) D3V-66M-1@4- D3V-66M-2@4- D3V-66M-3@4- Note: The @ in the model number is for the terminal code. A: Solder/quick-connect terminals (#187) C2: Quick-connect terminals (#187) C: Quick-connect terminals (#250) 4 Contact form SPDT Miniature Basic Switch D3V The in the model number is for the mounting hole size. None: 3.1 mm K: 2.9 mm 6 A (OF: 0.49 N {50 gf}) Actuator Hinge position (far from plunger) --- Plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever Contact form SPDT SPST-NC SPST-NO D3V-6G-1@3- D3V-6G-2@3- D3V-6G-3@3- D3V-6G1-3@3- Internal D3V-6G1-1@3- D3V-6G1-2@3- External (M) D3V-6G1M-1@3- D3V-6G1M-2@3- D3V-6G1M-3@3- Internal D3V-6G2-1@3- D3V-6G2-2@3- D3V-6G2-3@3- External (M) D3V-6G2M-1@3- D3V-6G2M-2@3- D3V-6G2M-3@3- Internal D3V-6G3-1@3- D3V-6G3-2@3- D3V-6G3-3@3- External (M) D3V-6G3M-1@3- D3V-6G3M-2@3- D3V-6G3M-3@3- D3V-6G4-3@3- Internal D3V-6G4-1@3- D3V-6G4-2@3- External (M) D3V-6G4M-1@3- D3V-6G4M-2@3- D3V-6G4M-3@3- Internal D3V-6G5-1@3- D3V-6G5-2@3- D3V-6G5-3@3- External (M) D3V-6G5M-1@3- D3V-6G5M-2@3- D3V-6G5M-3@3- Internal D3V-6G6-1@3- D3V-6G6-2@3- D3V-6G6-3@3- External (M) D3V-6G6M-1@3- D3V-6G6M-2@3- D3V-6G6M-3@3- 01 A (OF: 0.49 N {50 gf}) Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Plunger --- D3V-01-1@3- D3V-01-2@3- D3V-01-3@3- Short hinge lever Internal D3V-011-1@3- D3V-011-2@3- D3V-011-3@3- External (M) D3V-011M-1@3- D3V-011M-2@3- D3V-011M-3@3- Internal D3V-012-1@3- D3V-012-2@3- D3V-012-3@3- External (M) D3V-012M-1@3- D3V-012M-2@3- D3V-012M-3@3- Internal D3V-013-1@3- D3V-013-2@3- D3V-013-3@3- External (M) D3V-013M-1@3- D3V-013M-2@3- D3V-013M-3@3- Internal D3V-014-1@3- D3V-014-2@3- D3V-014-3@3- External (M) D3V-014M-1@3- D3V-014M-2@3- D3V-014M-3@3- Internal D3V-015-1@3- D3V-015-2@3- D3V-015-3@3- External (M) D3V-015M-1@3- D3V-015M-2@3- D3V-015M-3@3- Internal D3V-016-1@3- D3V-016-2@3- D3V-016-3@3- External (M) D3V-016M-1@3- D3V-016M-2@3- D3V-016M-3@3- Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever 01 A (OF: 0.25 N {25 gf}) Actuator Plunger Hinge position (far from plunger) --- Contact form SPDT D3V-01-1@2- SPST-NC D3V-01-2@2- SPST-NO D3V-01-3@2- Note: The @ in the model number is for the terminal code. A: Solder/quick-connect terminals (#187) C2: Quick-connect terminals (#187) C: Quick-connect terminals (#250) The in the model number is for the mounting hole size. None: 3.1 mm K: 2.9 mm Miniature Basic Switch D3V 5 Specifications Ratings Type Rated voltage Non-inductive load Resistive load NC D3V-21 D3V-16 D3V-11 D3V-6 D3V-01 Inductive load Lamp load NO NC Inductive load NO NC Motor load NO NC 250 VAC 21 A 3A 12 A 4A 8 VDC 30 VDC 125 VDC 250 VDC 21 A 14 A 0.6 A 0.3 A 5A 5A 0.1 A 0.05 A 12 A 12 A 0.6 A 0.3 A 7A 5A 0.1 A 0.05 A 250 VAC 16 A 2A 10 A 3A 8 VDC 30 VDC 125 VDC 250 VDC 16 A 10 A 0.6 A 0.3 A 4A 4A 0.1 A 0.05 A 10 A 10 A 0.6 A 0.3 A 6A 4A 0.1 A 0.05 A 250 VAC 11 A 1.5 A 6A 2A 8 VDC 30 VDC 125 VDC 250 VDC 11 A 6A 0.6 A 0.3 A 3A 3A 0.1 A 0.05 A 6A 6A 0.6 A 0.3 A 3A 3A 0.1 A 0.05 A 250 VAC 6A 3A 4A --- 8 VDC 30 VDC 125 VDC 250 VDC 6A 6A 0.4 A 0.3 A 3A 3A 0.1 A 0.05 A 4A 4A 0.4 A 0.2 A --- 125 VAC 0.1 A --- --- --- 8 VDC 30 VDC 0.1 A 0.1 A --- --- --- NO Note: 1. The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the normal current values of models with a contact gap of 0.5 mm (gap G). 2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC). 3. Lamp load has an inrush current of 10 times the steady-state current. 4. Motor load has an inrush current of 6 times the steady-state current. 5. The ratings values apply under the following test conditions: Ambient temperature: 202 C Ambient humidity: 655% Operating frequency: 30 operations/min 6 Miniature Basic Switch D3V Characteristics Operating speed 0.1 mm to 1 m/s (plunger models without levers) Operating frequency Mechanical: 600 operations/min Electrical: 60 operations/min Insulation resistance 100 M min. (at 500 VDC) Contact resistance (initial values) D3V-21: 50 m max. D3V-16, D3V-11, D3V-6: 30 m max. D3V-01, 0.49 N {50 gf}: 50 m max. 0.25 N {25 gf}: 100 m max. Dielectric strength (see note 1) 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity 2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts Vibration resistance (see note 2) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance (see note 2) Destruction: 400 m/s2 {approx. 40G} max. Malfunction: 100 m/s2 {approx. 10G} max. Durability (see note 3) Mechanical: 10,000,000 operations min. Electrical: D3V-21: 50,000 operations min. D3V-16: 100,000 operations min. D3V-11: 200,000 operations min. D3V-6, D3V-01: 500,000 operations min. Degree of protection IEC IP00 Degree of protection against electric shock Class I Proof tracking index (PTI) 250 Ambient operating temperature D3V-21, D3V-01: -25 C to 85 C (with no icing) D3V-16, D3V-11, D3V-6: -25 C to 105 C (with no icing) Ambient operating humidity 85% max. (for 5 C to 35 C) Weight Approx. 6.2 g (plunger models without levers) Note: 1. The dielectric strength values shown in the table are for models with a Separator. 2. For plunger models, the above values apply for use at both the free position and total travel position. For lever models, they apply at the total travel position. 3. For testing conditions, contact your OMRON sales representative. Approved Standards UL1054 (File No. E41515) CSA C22.2 No.55 (File No. LR21642) (Only standard ratings are listed.) Rated voltage D3V-21G D3V-16 D3V-16G D3V-11 D3V-11G D3V-6 D3V-6G D3V-01 125 VAC 21 A, 1/2 HP (See note.) 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP 0.1 A 250 VAC 21 A, 1/2 HP (See note.) 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP --- 125 VDC --- 0.6 A 0.1 A 0.6 A 0.1 A --- --- --- 250 VDC --- 0.3 A --- 0.3 A --- --- --- --- Note: Approval projected. EN 61058-1: 1992+A1: 1993 (License No. 119151L) Rated voltage D3V-21G D3V-16 D3V-11 D3V-6 D3V-01 125 VAC --- --- --- --- 0.1 A 250 VAC 20 (4) A 16 (3) A 11 (3) A 6 (2) A --- Testing conditions: 50,000 operations, T85 (0 C to 85 C) for D3V-21/D3V-01, T105 (0 C to 105 C) for D3V-16/D3V-11/D3V-6 Rated voltage 250 VAC D3V-21G 21 (8) A Testing conditions: 10,000 operations, T85 (0 C to 85 C) Miniature Basic Switch D3V 7 Contact Specifications Item Contact D3V-21 Specification Inrush current D3V-16 D3V-11 D3V-6 D3V-01 Rivet Crossbar Material Silver alloy Gap (standard value) 0.5 mm 1 mm (F gap type) or 0.5 mm (G gap type) Gold alloy 1.0 mm NC 50 A max. 40 A max. --- 24 A max. 15 A max. NO Minimum applicable load 160 mA at 5 VDC 1 mA at 5 VDC Contact Form SPDT SPST-NC SPST-NO NC NC NO NO COM COM COM Dimensions Unit: mm (inch) Terminals Terminal type Solder/Quick-connect Terminal (#187) (A) COM Quick-connect Terminal (#250) (C) (5.5) (5.5) (4.9) (6.5) (6.5) (7.7) 2.9 3.2 2.9 t = 0.5 (10) Three, solder/quick-connect terminals (#187) Terminal dimensions Quick-connect Terminal (#187) (C2) 6.35 3.2 (see note) 4.750.1 t = 0.5 (10) Three, quick-connect terminals (#187) (12.0) t = 0.8 Three, quick-connect terminals (#250) 8 6.35 3.2 3.95 4.750.1 6.350.1 2.4 dia. 1.6 dia. Note: Indicates the length to the center of the 1.6-dia. holes 1.6-dia. terminal hole 1.65-dia. terminal hole Note: The table above is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact specifications. For terminal positions, refer to the above Contact Form. Mounting Holes Two, 3.1-dia. mounting holes or M3 screw holes 10.30.1 22.20.1 8 Miniature Basic Switch D3V Dimensions and Operating Characteristics Note: 1. All units are in millimeters unless otherwise indicated. 2. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. 3. The following illustrations and drawings are for quick-connect terminals (#187) (terminals C2). D3V models incorporate terminals A and C. These models are different from #187 models in terminal size only. Terminals A and C are omitted from the following drawings. Refer to Terminals on page 8 for these terminals. 4. The following illustrations and drawings are for models with the hinge position set to external/further than plunger. Models with the hinge position set to internal position are not shown here. For details about the internal position models, contact your OMRON sales representative. Operating characteristics are the same for these two types of models. 5. The @ in the model number is for the terminal code. 6. The in the model number is for the mounting hole size. The hole size in the following illustrations of models with a suffix "K" in the is 2.9 mm. 7. The operating characteristics are for operation in the A direction ( ). Plunger Models D3V-21G-1 4- D3V-16-1 5- D3V-11-1 5- D3V-11-1 4- D3V-6-1 4- D3V-6G-1 3- D3V-01-1 2- D3V-01-1 3- Model A t=0.5 Three, quick-connect terminals (#187) D3V-21G-1@4A- D3V-16-1@5- D3V-11-1@5- D3V-11-1@4- D3V-6-1@4- D3V-6G-1@3- D3V-01-1@3- D3V-01-1@2- OF max. RF min. 125 g {1.23 N} 20 g {0.20 N} 200 g {1.96 N} 50 g {0.49 N} 100 g {0.98 N} 15 g {0.15 N} 50 g {0.49 N} 5 g {0.05 N} 50 g {0.49 N} 5 g {0.05 N} 25 g {0.25 N} 3 g {0.03 N} PT max. OT min. MD max. 1.2 mm 1.0 mm 0.3 mm 1.2 mm 1.0 mm 0.4 mm (F gap type) or 0.3 mm (G gap type) OP 14.70.4 mm 1.2 mm 1.0 mm 0.4 mm Short Hinge Lever Models D3V-21GM-1 4A- D3V-161M-1 5- D3V-111M-1 5- D3V-111M-1 4- D3V-61M-1 4- D3V-6G1M-1 3- D3V-01-1 2- D3V-01M1-1 3- A t=0.5 Three, quick-connect terminals (#187) Note: Stainless-steel lever. Model D3V-21G1M-1@4A- D3V-161M-1@5- D3V-111M-1@5- D3V-111M-1@4- D3V-61M-1@4- D3V-6G1M-1@3- OF max. RF min. 125 g {1.23 N} 20 g {0.20 N} 200 g {1.96 N} 50 g {0.49 N} 100 g {0.98 N} 15 g {0.15 N} 50 g {0.49 N} 5 g {0.05 N} PT max. OT min. MD max. 1.6 mm 0.8 mm 0.5 mm 1.6 mm 0.8 mm 0.6 mm (F gap type) or 0.5 mm (G gap type) OP 15.20.5 mm D3V-011M-1@3- 1.6 mm 0.8 mm 0.6 mm Miniature Basic Switch D3V 9 Hinge Lever Models D3V-21G2M-1 4A- D3V-162M-1 5- D3V-112M-1 5- D3V-112M-1 4- D3V-62M-1 4- D3V-6G2M-1 3- D3V-012M-1 3- A t=0.5 Three, quick-connect terminals (#187) Note: Stainless-steel lever. l Model D3V-21G2M-1@4A- D3V-162M-1@5- D3V-112M-1@5- D3V-112M-1@4- D3V-62M-1@4- OF max. RF min. 80 g {0.78 N} 6 g {0.06 N} 125 g {1.23 N} 14 g {0.14 N} 60 g {0.59 N} 6 g {0.06 N} PT max. OT min. MD max. 4.0 mm 1.6 mm 0.8 mm 4.0 mm 1.6 mm 1.5 mm (F gap type) or 0.8 mm (G gap type) OP 15.21.2 mm D3V-6G2M-1@3- D3V-012M-1@3- 30 g {0.29 N} --4.0 mm 1.6 mm 1.5 mm Long Hinge Lever Models D3V-21G3M-1 4A- D3V-163M-1 5- D3V-113M-1 5- D3V-113M-1 4- D3V-63M-1 4- D3V-6G3M-1 3- D3V-013M-1 3- A t=0.5 Three, quick-connect terminals (#187) Note: Stainless-steel lever. Model D3V-21G3M-1@4A- D3V-163M-1@5- D3V-113M-1@5- D3V-113M-1@4- D3V-63M-1@4- D3V-6G3M-1@3- OF max. RF min. 45 g {0.44 N} 3 g {0.03 N} 70 g {0.69 N} 6 g {0.06 N} 35 g {0.34 N} --- 20 g {0.20 N} --- PT max. OT min. MD max. 9.0 mm 2.0 mm 2.0 mm 9.0 mm 9.0 mm 3.2 mm 2.0 mm 2.8 mm (F gap type) or 2.0 mm (G gap type) 2.8 mm (F gap type) or 2.0 mm (G gap type) OP +2.6 15.2 -3.2 mm 10 Miniature Basic Switch D3V 15.22.6 mm D3V-013M-1@3- 9.0 mm 3.2 mm 2.8 mm Simulated Roller Lever Models D3V-21G3M-1 4A- D3V-164M-1 5- D3V-114M-1 5- D3V-114M-1 4- D3V-64M-1 4- D3V-6G4M-1 3- D3V-014M-1 3- A t=0.5 Three, quick-connect terminals (#187) Note: Stainless-steel lever. D3V-21G4M-1@4A- D3V-164M-1@5- D3V-114M-1@5- D3V-114M-1@4- D3V-64M-1@4- D3V-6G4M-1@3- OF max. RF min. 85 g {0.83 N} 7 g {0.07 N} 125 g {1.23 N} 14 g {0.14 N} 60 g {0.59 N} 6 g {0.06 N} 30 g {0.29 N} --- PT max. OT min. MD max. 4.0 mm 1.6 mm 1.4 mm 4.0 mm 1.6 mm 1.5 mm (F gap type) or 0.8 mm (G gap type) OP 18.71.2 mm Model D3V-014M-1@3- 4.0 mm 1.6 mm 1.5 mm Short Hinge Roller Lever Models D3V-21G5M-1 4A- D3V-165M-1 5- D3V-115M-1 5- D3V-115M-1 4- D3V-65M-1 4- D3V-6G5M-1 3- D3V-015M-1 3- A t=0.5 Three, quick-connect terminals (#187) Note: 1. Stainless-steel lever. 2. Oilless polyacetal resin roller. Model D3V-21G5M-1@4A- D3V-165M-1@5- D3V-115M-1@5- D3V-115M-1@4- D3V-65M-1@4- D3V-6G5M-1@3- OF max. RF min. 145 g {1.42 N} 20 g {0.2 N} 240 g {2.35 N} 50 g {0.49 N} 120 g {1.18 N} 15 g {0.15 N} 60 g {0.59 N} 6 g {0.06 N} PT max. OT min. MD max. 1.6 mm 0.8 mm 0.5 mm 1.6 mm 0.8 mm 0.6 mm (F gap type) or 0.5 mm (G gap type) OP 20.70.6 mm D3V-015M-1@3- 1.6 mm 0.8 mm 0.6 mm Miniature Basic Switch D3V 11 Hinge Roller Lever Models A D3V-21G6M-1 4A- D3V-166M-1 5- D3V-116M-1 5- D3V-116M-1 4- D3V-66M-1 4- D3V-6G6M-1 3- D3V-016M-1 3- t=0.5 Three, quick-connect terminals (#187) Note: 1. Stainless-steel lever. 2. Oilless polyacetal resin roller. Model D3V-21G6M-1@4A- D3V-166M-1@5- D3V-116M-1@5- D3V-116M-1@4- D3V-66M-1@4- D3V-6G6M-1@3- OF max. RF min. 80 g {0.79 N} 5 g {0.05 N} 125 g {1.23 N} 14 g {0.14 N} 60 g {0.59 N} 6 g {0.06 N} 30 g {0.29 N} --- PT max. OT min. MD max. 4.0 mm 1.6 mm 0.8 mm 4.0 mm 1.6 mm 1.5 mm (F gap type) or 0.8 mm (G gap type) OP 20.71.2 mm D3V-016M-1@3- 4.0 mm 1.6 mm 1.5 mm Precautions Handling Be careful not to drop the switch. Doing so may cause damage to the switch's internal components because it is designed for a small load. Correct Use Mounting Use two M3 mounting screws with an appropriate screwdriver to mount the switch. Tighten the screws to a torque of 0.39 to 0.59 N * m {4 to 6 kgf * cm}. Mounting Direction Mount lever-operated switches with a maximum operating force of 0.49 N in a direction where the actuator weight will not be applied to the switch. Since the switch is designed for a small load, its resetting force is small. Therefore, resetting failure may occur if unnecessary load is applied to the switch. Using Micro Loads Using a model for ordinary loads to open or close the contact of a micro load circuit may result faulty contact. Use models that operate in the following range. However, even when using micro load models within the operating range shown below, if inrush current occurs when the contact is opened or closed, it may increase contact wear and so decrease life expectancy. Therefore, insert a contact protection circuit where necessary. The minimum applicable load is the N-level reference value. This value indicates the malfunction reference level for the reliability level of 60% ( 60). The equation, 60 = 0.5 x 10-6 /operations indicates that the estimated malfunction rate is less than 1/2,000,000 operations with a reliability level of 60%. Voltage (V) Cautions Operating range for micro load models D3V-01 Operating range for generalload models Insulation Distance According to EN61058-1, the minimum insulation thickness for this switch should be 1.1 mm and minimum clearance distance between the terminal and mounting plate should be 1.9 mm. If the insulation distance cannot be provided in the product incorporating the switch, either use a switch with insulation barrier or use a Separator to ensure sufficient insulation distance. Inoperable range Current (mA) Solder Terminal Approval Conditions Use of soldering iron for normal soldering is acceptable. Soldering hook holes version available. Soldering terminal types 1 and 2 are met. 12 Miniature Basic Switch D3V Omron Electronic Components, LLC Terms and Conditions of Sales I. GENERAL 1. Definitions: The words used herein are defined as follows. (a) Terms: These terms and conditions (b) Seller: Omron Electronic Components LLC and its subsidiaries (c) Buyer: The buyer of Products, including any end user in section III through VI (d) Products: Products and/or services of Seller (e) Including: Including without limitation 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 3. Distributor: Any distributor shall inform its customer of the contents after and including section III of these Terms. II. SALES 1. Prices; Payment: All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller. 3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. Orders: Seller will accept no order less than 200 U.S. dollars net billing. 5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the Products. 7. Taxes: All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; (b) Delivery and shipping dates are estimates only; and (c) Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier must be presented in detail in writing to Seller within 30 days of receipt of shipment. III. PRECAUTIONS 1. Suitability: IT IS THE BUYER'S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER'S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products will meet their requirements of the intended use in all cases. Buyer must know and observe all prohibitions of use applicable to the Product/s. 2. Use with Attention: The followings are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference. (b) Use in consumer Products or any use in significant quantities. (c) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) Systems, machines, and equipment that could present a risk to life or property. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER. 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of a programmable Product. IV. WARRANTY AND LIMITATION 1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be no liability for Seller or its affiliates unless Seller's analysis confirms that the Products were handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. 3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. 4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses ( including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. V. INFORMATION; ETC. 1. Intellectual Property: The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. Performance Data: Performance data is provided as a guide in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. 4. Change In Specifications: Product specifications and description may be changed at any time based on improvements or other reasons. It is Seller's practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. However, some specifications of the Product may be changed without any notice. 5. Errors And Omissions: The information on Seller's website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the Products or information provided by Seller; (b) sale of Products to forbidden or other proscribed persons or organizations; (c)disclosure to non-citizens of regulated technology or information. VI. MISCELLANEOUS 1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. 2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent. 3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal and state courts in Illinois have exclusive jurisdiction for any dispute hereunder. 4. Amendment: These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. Miniature Basic Switch D3V 13 Certain Precautions on Specifications and Use 1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Use in consumer products or any use in significant quantities. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance. Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information. Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at http://www.components.omron.com - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 Global - http://www.omron.com USA - http://www.components.omron.com 847-882-2288 Cat. No. J01C-E-01 14 01/07 Miniature Basic Switch D3V Specifications subject to change without notice Printed in USA