D3V-21G6M-3C4A - Omron Electronic Components LLC

Miniature Basic Switch D3V 1

Miniature Basic Switch

D3V

Reliable Basic Switch with External Lever

• Available by 0.1 A, 6 A, 11 A, 16 A and 21 A models, all with

self-cleaning contacts. 0.1 A utilizes gold alloy crossbar

contacts for high reliability at low loads.

• Available with internally or externally fitted levers, and 2 fix-

ing positions for external levers.

• Conforms to EN61058-1 UL1054.

• Right-angle plunger option available in some models.

• RoHS Compliant.

Ordering Information

■Model Number Legend

1. Ratings

21: 20 (4) A at 250 VAC

16: 16 (3) A at 250 VAC

11: 11 (3) A at 250 VAC

6: 6 (2) A at 250 VAC

01: 0.1 A at 125 VAC

2. Contact Gap

None: 1 mm (F gap)

G: 0.5 mm (G gap)

3. Actuator

None: Pin plunger

1: Short hinge lever

2: Hinge lever

3: Long hinge lever

4: Simulated roller lever

5: Short hinge roller lever

6: Hinge roller lever

4. Hinge Position

None: Internal/Far from plunger

M: External/Far from plunger

K: External/Near plunger

5. Contact Form

1: SPDT

2: SPST-NC

3: SPST-NO

6. Terminals

A: Solder/quick-connect terminal (#187)

C2: Quick-connect terminal (#187)

C: Quick-connect terminal (#250)

(optional without surge creepage tab flush around

terminals.)

7. Maximum Operating Force

5: 1.96 N {200 gf}

4A: 1.23 N {125 gf}

4: 0.98 N {100 gf}

3: 0.49 N {50 gf}

2: 0.25 N {25 gf}

Note: These values are for the plunger models.

8. Mounting Hole Size

None: 3.1 mm

K: 2.9 mm

9. Special Code

None: Standard

H: High temperature (125°C)

E: Special rating: 21 (8) A

T: High temperature (200°C)

1 2 3 4 5 6 7 89

D3V-@@@@-@@@-@-@

2Miniature Basic Switch D3V

■Available Combinations

Note: 1. ●: Standard

❍: Semi-standard

2. Consult OMRON for specific models with standard approval.

■List of Models

21 A (OF: 1.23 N {125 gf})

16 A (OF: 1.96 N {200 gf})

Model D3V-21 D3V-16 D3V-11 D3V-6 D3V-01

Rated current 21 A 16 A 11 A 6 A 0.1 A

OF 1.23 N

{125 gf}

1.96 N

{200 gf}

0.98 N

{100 gf}

1.96 N

{200 gf}

0.98 N

{100 gf}

0.49 N

{50 gf}

1.96 N

{200 gf}

0.98 N

{100 gf}

0.49 N

{50 gf}

0.49 N

{50 gf}

0.25 N

{25 gf}

Heat resis-

tance

Contact

gap

Terminals

0.5 mm

1 mm

0.5 mm

F/G

1 mm or

0.5 mm

1 mm

0.5 mm

1 mm

0.5

0.5 mm

F/G

1 mm or

0.5 mm

1 mm

0.5

0.5 mm

1 mm

Standard

(85°C)

#187 ●●

#250 ●❍❍

Standard

(105°C)

#187 ●❍ ❍ ● ❍ ● ❍ ❍ ❍ ● ❍ ●

#250 ●❍ ❍ ● ❍ ● ❍ ❍ ❍ ● ❍ ●

High tem-

perature

(125°C)

#187 ❍❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍

#250 ❍❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍

High tem-

perature

(200°C)

#187 ❍❍❍❍ ❍❍

#250 ❍❍❍❍ ❍❍

Actuator Hinge position

(far from plunger)

Contact form

SPDT SPST-NC SPST-NO

--- D3V-21G-1@4A-∆D3V-21G-2@4A-∆D3V-21G-3@4A-∆

Internal D3V-21G1-1@4A-∆D3V-21G1-2@4A-∆D3V-21G1-3@4A-∆

External (M) D3V-21G1M-1@4A-∆D3V-21G1M-2@4A-∆D3V-21G1M-3@4A-∆

Internal D3V-21G2-1@4A-∆D3V-21G2-2@4A-∆D3V-21G2-3@4A-∆

External (M) D3V-21G2M-1@4A-∆D3V-21G2M-2@4A-∆D3V-21G2M-3@4A-∆

Internal D3V-21G3-1@4A-∆D3V-21G3-2@4A-∆D3V-21G3-3@4A-∆

External (M) D3V-21G3M-1@4A-∆D3V-21G3M-2@4A-∆D3V-21G3M-3@4A-∆

Internal D3V-21G4-1@4A-∆D3V-21G4-2@4A-∆D3V-21G4-3@4A-∆

External (M) D3V-21G4M-1@4A-∆D3V-21G4M-2@4A-∆D3V-21G4M-3@4A-∆

Internal D3V-21G5-1@4A-∆D3V-21G5-2@4A-∆D3V-21G5-3@4A-∆

External (M) D3V-21G5M-1@4A-∆D3V-21G5M-2@4A-∆D3V-21G5M-3@4A-∆

Internal D3V-21G6-1@4A-∆D3V-21G6-2@4A-∆D3V-21G6-3@4A-∆

External (M) D3V-21G6M-1@4A-∆D3V-21G6M-2@4A-∆D3V-21G6M-3@4A-∆

Actuator Hinge position

(far from plunger)

Contact form

SPDT SPST-NC SPST-NO

--- D3V-16-1@5-∆D3V-16-2@5-∆D3V-16-3@5-∆

Internal D3V-161-1@5-∆D3V-161-2@5-∆D3V-161-3@5-∆

External (M) D3V-161M-1@5-∆D3V-161M-2@5-∆D3V-161M-3@5-∆

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

Plunger

Short hinge lever

Miniature Basic Switch D3V 3

16 A (OF: 0.98 N {100 gf})

11 A (OF: 1.96 N {200 gf})

Note: The @ in the model number is for the terminal code.

A: Solder/quick-connect terminals (#187)

C2: Quick-connect terminals (#187)

C: Quick-connect terminals (#250)

The ∆ in the model number is for the mounting hole size.

None: 3.1 mm

K: 2.9 mm

Internal D3V-162-1@5-∆D3V-162-2@5-∆D3V-162-3@5-∆

External (M) D3V-162M-1@5-∆D3V-162M-2@5-∆D3V-162M-3@5-∆

Internal D3V-163-1@5-∆D3V-163-2@5-∆D3V-163-3@5-∆

External (M) D3V-163M-1@5-∆D3V-163M-2@5-∆D3V-163M-3@5-∆

Internal D3V-164-1@5-∆D3V-164-2@5-∆D3V-164-3@5-∆

External (M) D3V-164M-1@5-∆D3V-164M-2@5-∆D3V-164M-3@5-∆

Internal D3V-165-1@5-∆D3V-165-2@5-∆D3V-165-3@5-∆

External (M) D3V-165M-1@5-∆D3V-165M-2@5-∆D3V-165M-3@5-∆

Internal D3V-166-1@5-∆D3V-166-2@5-∆D3V-166-3@5-∆

External (M) D3V-166M-1@5-∆D3V-166M-2@5-∆D3V-166M-3@5-∆

Actuator Hinge position

(far from plunger)

Contact form

SPDT SPST-NC SPST-NO

--- D3V-16-1@4-∆D3V-16-2@4-∆D3V-16-3@4-∆

Internal D3V-161-1@4-∆D3V-161-2@4-∆D3V-161-3@4-∆

External (M) D3V-161M-1@4-∆D3V-161M-2@4-∆D3V-161M-3@4-∆

Internal D3V-162-1@4-∆D3V-162-2@4-∆D3V-162-3@4-∆

External (M) D3V-162M-1@4-∆D3V-162M-2@4-∆D3V-162M-3@4-∆

Internal D3V-163-1@4-∆D3V-163-2@4-∆D3V-163-3@4-∆

External (M) D3V-163M-1@4-∆D3V-163M-2@4-∆D3V-163M-3@4-∆

Internal D3V-164-1@4-∆D3V-164-2@4-∆D3V-164-3@4-∆

External (M) D3V-164M-1@4-∆D3V-164M-2@4-∆D3V-164M-3@4-∆

Internal D3V-165-1@4-∆D3V-165-2@4-∆D3V-165-3@4-∆

External (M) D3V-165M-1@4-∆D3V-165M-2@4-∆D3V-165M-3@4-∆

Internal D3V-166-1@4-∆D3V-166-2@4-∆D3V-166-3@4-∆

External (M) D3V-166M-1@4-∆D3V-166M-2@4-∆D3V-166M-3@4-∆

Actuator Hinge position

(far from plunger)

Contact form

SPDT SPST-NC SPST-NO

--- D3V-11-1@5-∆D3V-11-2@5-∆D3V-11-3@5-∆

Internal D3V-111-1@5-∆D3V-111-2@5-∆D3V-111-3@5-∆

External (M) D3V-111M-1@5-∆D3V-111M-2@5-∆D3V-111M-3@5-∆

Internal D3V-112-1@5-∆D3V-112-2@5-∆D3V-112-3@5-∆

External (M) D3V-112M-1@5-∆D3V-112M-2@5-∆D3V-112M-3@5-∆

Internal D3V-113-1@5-∆D3V-113-2@5-∆D3V-113-3@5-∆

External (M) D3V-113M-1@5-∆D3V-113M-2@5-∆D3V-113M-3@5-∆

Internal D3V-114-1@5-∆D3V-114-2@5-∆D3V-114-3@5-∆

External (M) D3V-114M-1@5-∆D3V-114M-2@5-∆D3V-114M-3@5-∆

Internal D3V-115-1@5-∆D3V-115-2@5-∆D3V-115-3@5-∆

External (M) D3V-115M-1@5-∆D3V-115M-2@5-∆D3V-115M-3@5-∆

Internal D3V-116-1@5-∆D3V-116-2@5-∆D3V-116-3@5-∆

External (M) D3V-116M-1@5-∆D3V-116M-2@5-∆D3V-116M-3@5-∆

Actuator Hinge position

(far from plunger)

Contact form

SPDT SPST-NC SPST-NO

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

Plun

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

4Miniature Basic Switch D3V

11 A (OF: 0.98 N {100 gf})

11 A (OF: 0.49 N {50 gf})

6 A (OF: 0.98 N {100 gf})

Note: The @ in the model number is for the terminal code.

A: Solder/quick-connect terminals (#187)

C2: Quick-connect terminals (#187)

C: Quick-connect terminals (#250)

The ∆ in the model number is for the mounting hole size.

None: 3.1 mm

K: 2.9 mm

Actuator Hinge position

(far from plunger)

Contact form

SPDT SPST-NC SPST-NO

--- D3V-11-1@4-∆D3V-11-2@4-∆D3V-11-3@4-∆

Internal D3V-111-1@4-∆D3V-111-2@4-∆D3V-111-3@4-∆

External (M) D3V-111M-1@4-∆D3V-111M-2@4-∆D3V-111M-3@4-∆

Internal D3V-112-1@4-∆D3V-112-2@4-∆D3V-112-3@4-∆

External (M) D3V-112M-1@4-∆D3V-112M-2@4-∆D3V-112M-3@4-∆

Internal D3V-113-1@4-∆D3V-113-2@4-∆D3V-113-3@4-∆

External (M) D3V-113M-1@4-∆D3V-113M-2@4-∆D3V-113M-3@4-∆

Internal D3V-114-1@4-∆D3V-114-2@4-∆D3V-114-3@4-∆

External (M) D3V-114M-1@4-∆D3V-114M-2@4-∆D3V-114M-3@4-∆

Internal D3V-115-1@4-∆D3V-115-2@4-∆D3V-115-3@4-∆

External (M) D3V-115M-1@4-∆D3V-115M-2@4-∆D3V-115M-3@4-∆

Internal D3V-116-1@4-∆D3V-116-2@4-∆D3V-116-3@4-∆

External (M) D3V-116M-1@4-∆D3V-116M-2@4-∆D3V-116M-3@4-∆

Actuator Hinge position

(far from plunger)

Contact form

SPDT SPST-NC SPST-NO

--- D3V-11G-1@3-∆D3V-11G-2@4-∆D3V-11G-3@3-∆

Internal D3V-11G1-1@3-∆D3V-11G1-2@4-∆D3V-11G1-3@3-∆

External (M) D3V-11G1M-1@3-∆D3V-11G1M-2@3-∆D3V-11G1M-3@3-∆

Internal D3V-11G2-1@3-∆D3V-11G2-2@3-∆D3V-11G2-3@3-∆

External (M) D3V-11G2M-1@3-∆D3V-11G2M-2@3-∆D3V-11G2M-3@3-∆

Internal D3V-11G3-1@3-∆D3V-11G3-2@3-∆D3V-11G3-3@3-∆

External (M) D3V-11G3M-1@3-∆D3V-11G3M-2@3-∆D3V-11G3M-3@3-∆

Internal D3V-11G4-1@3-∆D3V-11G4-2@3-∆D3V-11G4-3@3-∆

External (M) D3V-11G4M-1@3-∆D3V-11G4M-2@3-∆D3V-11G4M-3@3-∆

Internal D3V-11G5-1@3-∆D3V-11G5-2@3-∆D3V-11G5-3@3-∆

External (M) D3V-11G5M-1@3-∆D3V-11G5M-2@3-∆D3V-11G5M-3@3-∆

Internal D3V-11G6-1@3-∆D3V-11G6-2@3-∆D3V-11G6-3@3-∆

External (M) D3V-11G6M-1@3-∆D3V-11G6M-2@3-∆D3V-11G6M-3@3-∆

Actuator Hinge position

(far from plunger)

Contact form

SPDT SPST-NC SPST-NO

--- D3V-6-1@4-∆D3V-6-2@4-∆D3V-6-3@4-∆

Internal D3V-61-1@4-∆D3V-61-2@4-∆D3V-61-3@4-∆

External (M) D3V-61M-1@4-∆D3V-61M-2@4-∆D3V-61M-3@4-∆

Internal D3V-62-1@4-∆D3V-62-2@4−∆ D3V-62-3@4-∆

External (M) D3V-62M-1@4-∆D3V-62M-2@4-∆D3V-62M-3@4-∆

Internal D3V-63-1@4-∆D3V-63-2@4-∆D3V-63-3@4-∆

External (M) D3V-63M-1@4-∆D3V-63M-2@4-∆D3V-63M-3@4-∆

Internal D3V-64-1@4-∆D3V-64-2@4-∆D3V-64-3@4-∆

External (M) D3V-64M-1@4-∆D3V-64M-2@4-∆D3V-64M-3@4-∆

Internal D3V-65-1@4-∆D3V-65-2@4-∆D3V-65-3@4-∆

External (M) D3V-65M-1@4-∆D3V-65M-2@4-∆D3V-65M-3@4-∆

Internal D3V-66-1@4-∆D3V-66-2@4-∆D3V-66-3@4-∆

External (M) D3V-66M-1@4-∆D3V-66M-2@4-∆D3V-66M-3@4-∆

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

Miniature Basic Switch D3V 5

6 A (OF: 0.49 N {50 gf})

01 A (OF: 0.49 N {50 gf})

01 A (OF: 0.25 N {25 gf})

Note: The @ in the model number is for the terminal code.

A: Solder/quick-connect terminals (#187)

C2: Quick-connect terminals (#187)

C: Quick-connect terminals (#250)

The ∆ in the model number is for the mounting hole size.

None: 3.1 mm

K: 2.9 mm

Actuator Hinge position

(far from plunger)

Contact form

SPDT SPST-NC SPST-NO

--- D3V-6G-1@3-∆D3V-6G-2@3-∆D3V-6G-3@3-∆

Internal D3V-6G1-1@3-∆D3V-6G1-2@3-∆D3V-6G1-3@3-∆

External (M) D3V-6G1M-1@3-∆D3V-6G1M-2@3-∆D3V-6G1M-3@3-∆

Internal D3V-6G2-1@3-∆D3V-6G2-2@3-∆D3V-6G2-3@3-∆

External (M) D3V-6G2M-1@3-∆D3V-6G2M-2@3-∆D3V-6G2M-3@3-∆

Internal D3V-6G3-1@3-∆D3V-6G3-2@3-∆D3V-6G3-3@3-∆

External (M) D3V-6G3M-1@3-∆D3V-6G3M-2@3-∆D3V-6G3M-3@3-∆

Internal D3V-6G4-1@3-∆D3V-6G4-2@3-∆D3V-6G4-3@3-∆

External (M) D3V-6G4M-1@3-∆D3V-6G4M-2@3-∆D3V-6G4M-3@3-∆

Internal D3V-6G5-1@3-∆D3V-6G5-2@3-∆D3V-6G5-3@3-∆

External (M) D3V-6G5M-1@3-∆D3V-6G5M-2@3-∆D3V-6G5M-3@3-∆

Internal D3V-6G6-1@3-∆D3V-6G6-2@3-∆D3V-6G6-3@3-∆

External (M) D3V-6G6M-1@3-∆D3V-6G6M-2@3-∆D3V-6G6M-3@3-∆

Actuator Hinge position

(far from plunger)

Contact form

SPDT SPST-NC SPST-NO

--- D3V-01-1@3-∆D3V-01-2@3-∆D3V-01-3@3-∆

Internal D3V-011-1@3-∆D3V-011-2@3-∆D3V-011-3@3-∆

External (M) D3V-011M-1@3-∆D3V-011M-2@3-∆D3V-011M-3@3-∆

Internal D3V-012-1@3-∆D3V-012-2@3-∆D3V-012-3@3-∆

External (M) D3V-012M-1@3-∆D3V-012M-2@3-∆D3V-012M-3@3-∆

Internal D3V-013-1@3-∆D3V-013-2@3-∆D3V-013-3@3-∆

External (M) D3V-013M-1@3-∆D3V-013M-2@3-∆D3V-013M-3@3-∆

Internal D3V-014-1@3-∆D3V-014-2@3-∆D3V-014-3@3-∆

External (M) D3V-014M-1@3-∆D3V-014M-2@3-∆D3V-014M-3@3-∆

Internal D3V-015-1@3-∆D3V-015-2@3-∆D3V-015-3@3-∆

External (M) D3V-015M-1@3-∆D3V-015M-2@3-∆D3V-015M-3@3-∆

Internal D3V-016-1@3-∆D3V-016-2@3-∆D3V-016-3@3-∆

External (M) D3V-016M-1@3-∆D3V-016M-2@3-∆D3V-016M-3@3-∆

Actuator Hinge position

(far from plunger)

Contact form

SPDT SPST-NC SPST-NO

--- D3V-01-1@2-∆D3V-01-2@2-∆D3V-01-3@2-∆

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

Plunger

6Miniature Basic Switch D3V

Specifications

■Ratings

Note: 1. The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the normal current

values of models with a contact gap of 0.5 mm (gap G).

2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).

3. Lamp load has an inrush current of 10 times the steady-state current.

4. Motor load has an inrush current of 6 times the steady-state current.

5. The ratings values apply under the following test conditions:

Ambient temperature: 20±2°C

Ambient humidity: 65±5%

Operating frequency: 30 operations/min

Type Rated voltage Non-inductive load Inductive load

Resistive load Lamp load Inductive load Motor load

NC NO NC NO NC NO NC NO

D3V-21 250 VAC 21 A 3 A 12 A 4 A

8 VDC

30 VDC

125 VDC

250 VDC

21 A

14 A

0.6 A

0.3 A

5 A

0.1 A

0.05 A

12 A

0.6 A

0.3 A

7 A

5 A

0.1 A

0.05 A

D3V-16 250 VAC 16 A 2 A 10 A 3 A

8 VDC

30 VDC

125 VDC

250 VDC

16 A

10 A

0.6 A

0.3 A

4 A

0.1 A

0.05 A

10 A

0.6 A

0.3 A

6 A

4 A

0.1 A

0.05 A

D3V-11 250 VAC 11 A 1.5 A 6 A 2 A

8 VDC

30 VDC

125 VDC

250 VDC

11 A

6 A

0.6 A

0.3 A

3 A

0.1 A

0.05 A

6 A

0.6 A

0.3 A

3 A

0.1 A

0.05 A

D3V-6250 VAC6 A3 A4 A---

8 VDC

30 VDC

125 VDC

250 VDC

6 A

0.4 A

0.3 A

3 A

0.1 A

0.05 A

4 A

0.4 A

0.2 A

---

D3V-01 125 VAC 0.1 A --- --- ---

8 VDC

30 VDC

0.1 A

--- --- ---

Miniature Basic Switch D3V 7

■Characteristics

Note: 1. The dielectric strength values shown in the table are for models with a Separator.

2. For plunger models, the above values apply for use at both the free position and total travel position. For lever models, they apply at the

total travel position.

3. For testing conditions, contact your OMRON sales representative.

■Approved Standards

UL1054 (File No. E41515) CSA C22.2 No.55 (File No. LR21642)

(Only standard ratings are listed.)

Note: Approval projected.

EN 61058-1: 1992+A1: 1993 (License No. 119151L)

Testing conditions: 50,000 operations, T85 (0°C to 85°C) for D3V-21/D3V-01, T105 (0°C to 105°C) for D3V-16/D3V-11/D3V-6

Testing conditions: 10,000 operations, T85 (0°C to 85°C)

Operating speed 0.1 mm to 1 m/s (plunger models without levers)

Operating frequency Mechanical: 600 operations/min

Electrical: 60 operations/min

Insulation resistance 100 MΩ min. (at 500 VDC)

Contact resistance (initial values) D3V-21: 50 mΩ max.

D3V-16, D3V-11, D3V-6: 30 mΩ max.

D3V-01, 0.49 N {50 gf}: 50 mΩ max.

0.25 N {25 gf}: 100 mΩ max.

Dielectric strength (see note 1) 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity

2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each

terminal and non-current-carrying metal parts

Vibration resistance (see note 2) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance (see note 2) Destruction: 400 m/s2 {approx. 40G} max.

Malfunction: 100 m/s2 {approx. 10G} max.

Durability (see note 3) Mechanical: 10,000,000 operations min.

Electrical: D3V-21: 50,000 operations min.

D3V-16: 100,000 operations min.

D3V-11: 200,000 operations min.

D3V-6, D3V-01: 500,000 operations min.

Degree of protection IEC IP00

Degree of protection against electric

shock

Class I

Proof tracking index (PTI) 250

Ambient operating temperature D3V-21, D3V-01: –25°C to 85°C (with no icing)

D3V-16, D3V-11, D3V-6: –25°C to 105°C (with no icing)

Ambient operating humidity 85% max. (for 5°C to 35°C)

Weight Approx. 6.2 g (plunger models without levers)

Rated voltage D3V-21G D3V-16 D3V-16G D3V-11 D3V-11G D3V-6 D3V-6G D3V-01

125 VAC 21 A, 1/2 HP

(See note.)

16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP 0.1 A

250 VAC 21 A, 1/2 HP

(See note.)

16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP ---

125 VDC --- 0.6 A 0.1 A 0.6 A 0.1 A --- --- ---

250 VDC --- 0.3 A --- 0.3 A --- --- --- ---

Rated voltage D3V-21G D3V-16 D3V-11 D3V-6 D3V-01

125 VAC --- --- --- --- 0.1 A

250 VAC 20 (4) A 16 (3) A 11 (3) A 6 (2) A ---

Rated voltage D3V-21G

250 VAC 21 (8) A

8Miniature Basic Switch D3V

■Contact Specifications

■Contact Form

Dimensions

Unit: mm (inch)

■Terminals

Note: The table above is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact specifications. For

terminal positions, refer to the above Contact Form.

■Mounting Holes

Item D3V-21 D3V-16 D3V-11 D3V-6 D3V-01

Contact Specification Rivet Crossbar

Material Silver alloy Gold alloy

Gap

(standard value)

0.5 mm 1 mm (F gap type) or 0.5 mm (G gap type) 1.0 mm

Inrush current NC 50 A max. 40 A max. 24 A max. 15 A max. ---

Minimum applicable load 160 mA at 5 VDC 1 mA at 5 VDC

SPDT SPST-NC SPST-NO

COM

Terminal type Solder/Quick-connect Terminal

(#187) (A)

Quick-connect Terminal

(#187) (C2)

Quick-connect Terminal

(#250) (C)

COM

Terminal

dimensions

t = 0.5

Three, solder/quick-connect

terminals (#187)

(10)

2.9

(6.5)

(5.5)

t = 0.5

Three, quick-connect

terminals (#187)

(10)

2.9

(6.5)

(5.5)

t = 0.8

Three, quick-connect

terminals (#250)

(12.0)

3.2

(7.7)

(4.9)

1.6 dia.

2.4 dia.

4.75±0.1

6.35

3.2 (see note)

Note: Indicates the length to the center of the

1.6-dia. holes

1.6-dia. terminal hole

4.75±0.1

3.2

6.35

1.65-dia. terminal hole

6.35±0.1

3.95

Two, 3.1-dia. mounting holes or

M3 screw holes

10.3±0.1

22.2±0.1

Miniature Basic Switch D3V 9

■Dimensions and Operating Characteristics

Note: 1. All units are in millimeters unless otherwise indicated.

2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

3. The following illustrations and drawings are for quick-connect terminals (#187) (terminals C2). D3V models incorporate terminals A and

C. These models are different from #187 models in terminal size only. Terminals A and C are omitted from the following drawings. Refer

to Te r m i n a l s on page 8 for these terminals.

4. The following illustrations and drawings are for models with the hinge position set to external/further than plunger. Models with the hinge

position set to internal position are not shown here. For details about the internal position models, contact your OMRON sales represen-

tative. Operating characteristics are the same for these two types of models.

5. The @ in the model number is for the terminal code.

6. The ∆ in the model number is for the mounting hole size.

The hole size in the following illustrations of models with a suffix “K” in the ∆ is 2.9 mm.

7. The operating characteristics are for operation in the A direction ( ).

Plunger Models

Short Hinge Lever Models

Note: Stainless-steel lever.

➡

Model D3V-21G-1@4A-∆D3V-16-1@5-∆

D3V-11-1@5-∆

D3V-11-1@4-∆

D3V-6-1@4-∆

D3V-6G-1@3-∆D3V-01-1@3-∆D3V-01-1@2-∆

OF max.

RF min.

125 g {1.23 N}

20 g {0.20 N}

200 g {1.96 N}

50 g {0.49 N}

100 g {0.98 N}

15 g {0.15 N}

50 g {0.49 N}

5 g {0.05 N}

50 g {0.49 N}

5 g {0.05 N}

25 g {0.25 N}

3 g {0.03 N}

PT max.

OT min.

MD max.

1.2 mm

1.0 mm

0.3 mm

1.2 mm

1.0 mm

0.4 mm (F gap type) or 0.3 mm (G gap type)

1.2 mm

1.0 mm

0.4 mm

OP 14.7±0.4 mm

➡

t=0.5

Three, quick-connect

terminals (#187)

D3V-21G-14-∆

D3V-16-15-∆

D3V-11-15-∆

D3V-11-14-∆

D3V-6-14-∆

D3V-6G-13-∆

D3V-01-12-∆

D3V-01-13-∆

Model D3V-21G1M-1@4A-∆D3V-161M-1@5-∆

D3V-111M-1@5-∆

D3V-111M-1@4-∆

D3V-61M-1@4-∆

D3V-6G1M-1@3-∆D3V-011M-1@3-∆

OF max.

RF min.

125 g {1.23 N}

20 g {0.20 N}

200 g {1.96 N}

50 g {0.49 N}

100 g {0.98 N}

15 g {0.15 N}

50 g {0.49 N}

5 g {0.05 N}

PT max.

OT min.

MD max.

1.6 mm

0.8 mm

0.5 mm

1.6 mm

0.8 mm

0.6 mm (F gap type) or 0.5 mm (G gap type)

1.6 mm

0.8 mm

0.6 mm

OP 15.2±0.5 mm

➡

t=0.5

Three, quick-connect

terminals (#187)

D3V-21GM-14A-∆

D3V-161M-15-∆

D3V-111M-15-∆

D3V-111M-14-∆

D3V-61M-14-∆

D3V-6G1M-13-∆

D3V-01-12-∆

D3V-01M1-13-∆

10 Miniature Basic Switch D3V

Hinge Lever Models

Note: Stainless-steel lever.

Long Hinge Lever Models

Note: Stainless-steel lever.

Model D3V-21G2M-1@4A-∆D3V-162M-1@5-∆

D3V-112M-1@5-∆

D3V-112M-1@4-∆

D3V-62M-1@4−∆

D3V-6G2M-1@3-∆D3V-012M-1@3-∆

OF max.

RF min.

80 g {0.78 N}

6 g {0.06 N}

125 g {1.23 N}

14 g {0.14 N}

60 g {0.59 N}

6 g {0.06 N}

30 g {0.29 N}

---

PT max.

OT min.

MD max.

4.0 mm

1.6 mm

0.8 mm

4.0 mm

1.6 mm

1.5 mm (F gap type) or 0.8 mm (G gap type)

4.0 mm

1.6 mm

1.5 mm

OP 15.2±1.2 mm

t=0.5

Three, quick-connect

terminals (#187)

➡

D3V-21G2M-14A-∆

D3V-162M-15-∆

D3V-112M-15-∆

D3V-112M-14-∆

D3V-62M-14-∆

D3V-6G2M-13-∆

D3V-012M-13-∆

Model D3V-21G3M-1@4A-∆D3V-163M-1@5-∆

D3V-113M-1@5-∆

D3V-113M-1@4-∆

D3V-63M-1@4-∆

D3V-6G3M-1@3-∆D3V-013M-1@3-∆

OF max.

RF min.

45 g {0.44 N}

3 g {0.03 N}

70 g {0.69 N}

6 g {0.06 N}

35 g {0.34 N}

---

20 g {0.20 N}

---

PT max.

OT min.

MD max.

9.0 mm

2.0 mm

9.0 mm

2.0 mm

2.8 mm (F gap type) or 2.0 mm (G gap type)

9.0 mm

3.2 mm

2.8 mm (F gap type) or 2.0 mm (G gap

type)

9.0 mm

3.2 mm

2.8 mm

OP 15.2±2.6 mm

t=0.5

Three, quick-connect

terminals (#187)

➡

D3V-21G3M-14A-∆

D3V-163M-15-∆

D3V-113M-15-∆

D3V-113M-14-∆

D3V-63M-14-∆

D3V-6G3M-13-∆

D3V-013M-13-∆

15.2 mm

+2.6

−3.2

Miniature Basic Switch D3V 11

Simulated Roller Lever Models

Note: Stainless-steel lever.

Short Hinge Roller Lever Models

Note: 1. Stainless-steel lever.

2. Oilless polyacetal resin roller.

Model D3V-21G4M-1@4A-∆D3V-164M-1@5-∆

D3V-114M-1@5-∆

D3V-114M-1@4-∆

D3V-64M-1@4-∆

D3V-6G4M-1@3-∆D3V-014M-1@3-∆

OF max.

RF min.

85 g {0.83 N}

7 g {0.07 N}

125 g {1.23 N}

14 g {0.14 N}

60 g {0.59 N}

6 g {0.06 N}

30 g {0.29 N}

---

PT max.

OT min.

MD max.

4.0 mm

1.6 mm

1.4 mm

4.0 mm

1.6 mm

1.5 mm (F gap type) or 0.8 mm (G gap type)

4.0 mm

1.6 mm

1.5 mm

OP 18.7±1.2 mm

Model D3V-21G5M-1@4A-∆D3V-165M-1@5-∆

D3V-115M-1@5-∆

D3V-115M-1@4-∆

D3V-65M-1@4-∆

D3V-6G5M-1@3-∆D3V-015M-1@3-∆

OF max.

RF min.

145 g {1.42 N}

20 g {0.2 N}

240 g {2.35 N}

50 g {0.49 N}

120 g {1.18 N}

15 g {0.15 N}

60 g {0.59 N}

6 g {0.06 N}

PT max.

OT min.

MD max.

1.6 mm

0.8 mm

0.5 mm

1.6 mm

0.8 mm

0.6 mm (F gap type) or 0.5 mm (G gap type)

1.6 mm

0.8 mm

0.6 mm

OP 20.7±0.6 mm

t=0.5

Three, quick-connect

terminals (#187)

➡

D3V-21G3M-14A-∆

D3V-164M-15-∆

D3V-114M-15-∆

D3V-114M-14-∆

D3V-64M-14-∆

D3V-6G4M-13-∆

D3V-014M-13-∆

t=0.5

Three, quick-connect

terminals (#187)

➡

D3V-21G5M-14A-∆

D3V-165M-15-∆

D3V-115M-15-∆

D3V-115M-14-∆

D3V-65M-14-∆

D3V-6G5M-13-∆

D3V-015M-13-∆

12 Miniature Basic Switch D3V

Hinge Roller Lever Models

Note: 1. Stainless-steel lever.

2. Oilless polyacetal resin roller.

Precautions

■Cautions

Handling

Be careful not to drop the switch. Doing so may cause damage to the

switch’s internal components because it is designed for a small load.

■Correct Use

Mounting

Use two M3 mounting screws with an appropriate screwdriver to

mount the switch. Tighten the screws to a torque of 0.39 to

0.59 N • m {4 to 6 kgf • cm}.

Mounting Direction

Mount lever-operated switches with a maximum operating force of

0.49 N in a direction where the actuator weight will not be applied to

the switch. Since the switch is designed for a small load, its resetting

force is small. Therefore, resetting failure may occur if unnecessary

load is applied to the switch.

Insulation Distance

According to EN61058-1, the minimum insulation thickness for this

switch should be 1.1 mm and minimum clearance distance between

the terminal and mounting plate should be 1.9 mm. If the insulation

distance cannot be provided in the product incorporating the switch,

either use a switch with insulation barrier or use a Separator to

ensure sufficient insulation distance.

Using Micro Loads

Using a model for ordinary loads to open or close the contact of a

micro load circuit may result faulty contact. Use models that operate

in the following range. However, even when using micro load models

within the operating range shown below, if inrush current occurs

when the contact is opened or closed, it may increase contact wear

and so decrease life expectancy. Therefore, insert a contact protec-

tion circuit where necessary.

The minimum applicable load is the N-level reference value. This

value indicates the malfunction reference level for the reliability level

of 60% (λ 60). The equation, λ 60 = 0.5 × 10−6/operations indicates

that the estimated malfunction rate is less than

1/2,000,000 operations with a reliability level of 60%.

Solder Terminal Approval Conditions

Model D3V-21G6M-1@4A-∆D3V-166M-1@5-∆

D3V-116M-1@5-∆

D3V-116M-1@4-∆

D3V-66M-1@4-∆

D3V-6G6M-1@3-∆D3V-016M-1@3-∆

OF max.

RF min.

80 g {0.79 N}

5 g {0.05 N}

125 g {1.23 N}

14 g {0.14 N}

60 g {0.59 N}

6 g {0.06 N}

30 g {0.29 N}

---

PT max.

OT min.

MD max.

4.0 mm

1.6 mm

0.8 mm

4.0 mm

1.6 mm

1.5 mm (F gap type) or 0.8 mm (G gap type)

4.0 mm

1.6 mm

1.5 mm

OP 20.7±1.2 mm

t=0.5

Three, quick-connect

terminals (#187)

➡

D3V-21G6M-14A-∆

D3V-166M-15-∆

D3V-116M-15-∆

D3V-116M-14-∆

D3V-66M-14-∆

D3V-6G6M-13-∆

D3V-016M-13-∆

Use of soldering iron for normal soldering is acceptable.

Soldering hook holes version available.

Soldering terminal types 1 and 2 are met.

Current (mA)

Voltage (V)

Inoperable

range

Operating

range for

general-

load models

Operating range

for micro load

models D3V-01

Miniature Basic Switch D3V 13

Omron Electronic Components, LLC

Terms and Conditions of Sales

1. Definitions: The words used herein are defined as follows.

(a) Terms: These terms and conditions

(b) Seller: Omron Electronic Components LLC and its subsidiaries

(d) Products: Products and/or services of Seller

(e) Including: Including without limitation

2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,

invoices, purchase orders and other documents, whether electronic or in writing, relating

to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's

purchase order or other documents which are inconsistent with, or in addition to, these

Te r m s .

3. Distributor: Any distributor shall inform its customer of the contents after and including

section III of these Terms.

1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.

Buyer agrees to pay the price in effect at time of shipment. Payments for Products

received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no

right to set off any amounts against the amount owing in respect of this invoice.

2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to

Buyer after deducting transportation charges, taxes and duties, and will be allowed only

if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past

due amounts owing to Seller.

3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum

legal rate, whichever is less, on any balance not paid within the stated terms.

4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.

5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer

shall make remittance to Seller at the then current exchange rate most favorable to

Seller; provided that if remittance is not made when due, Buyer will convert the amount

to U.S. dollars at the then current exchange rate most favorable to Seller available

during the period between the due date and the date remittance is actually made.

6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining

any government approvals regarding the importation or sale of the Products.

7. Taxes: All taxes, duties and other governmental charges (other than general real property

and income taxes), including any interest or penalties thereon, imposed directly or

indirectly on Seller or required to be collected directly or indirectly by Seller for the

manufacture, production, sale, delivery, importation, consumption or use of the Products

sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall

be charged to and remitted by Buyer to Seller.

8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,

Seller reserves the right to stop shipments or require satisfactory security or payment in

advance. If Buyer fails to make payment or otherwise comply with these Terms or any

related agreement, Seller may (without liability and in addition to other remedies) cancel any

unshipped portion of Products sold hereunder and stop any Products in transit until

Buyer pays all amounts, including amounts payable hereunder, whether or not then due,

which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid

accounts.

9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer

indemnifies Seller fully against all costs or expenses arising in connection therewith.

10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from

causes beyond its control, including earthquakes, fires, floods, strikes or other labor

disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,

delay in or lack of transportation or the requirements of any government authority.

11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:

(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise

stated in writing by Seller), at which point title to and all risk of loss of the Products shall

pass from Seller to Buyer, provided that Seller shall retain a security interest in the

Products until the full purchase price is paid by Buyer;

(b) Delivery and shipping dates are estimates only; and

handling and extra charges apply to special conditions.

12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products

occurring before delivery to the carrier must be presented in detail in writing to Seller

within 30 days of receipt of shipment.

1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY

OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE

APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING

APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE

BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC

COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)

SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.

Buyer acknowledges that it alone has determined that the Products will meet their

requirements of the intended use in all cases. Buyer must know and observe all

prohibitions of use applicable to the Product/s.

2. Use with Attention: The followings are some examples of applications for which

particular attention must be given. This is not intended to be an exhaustive list of all

possible use of any Product, nor to imply that any use listed may be suitable for any

Product:

(a) Outdoor use, use involving potential chemical contamination or electrical

interference.

(b) Use in consumer Products or any use in significant quantities.

medical equipment, amusement machines, vehicles, safety equipment, and

installations subject to separate industry or government regulations.

(d) Systems, machines, and equipment that could present a risk to life or property.

3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING

SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE

PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE

WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED

VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY

SELLER.

5. Programmable Products: Seller shall not be responsible for the Buyer's programming of

a programmable Product.

1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in

materials and workmanship for a period of twelve months from the date of sale by Seller

(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY

OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE OF THE PRODUCTS.

2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form

originally shipped with Buyer responsible for labor charges for removal or replacement

thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an

amount equal to the purchase price of the Product; provided that there shall be no

liability for Seller or its affiliates unless Seller's analysis confirms that the Products were

handled, stored, installed and maintained and not subject to contamination, abuse,

misuse or inappropriate modification. Return of any Products by Buyer must be

approved in writing by Seller before shipment.

3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR

SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF

PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED

WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,

WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL

LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF

THE PRODUCT ON WHICH LIABILITY IS ASSERTED.

4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its

employees from and against all liabilities, losses, claims, costs and expenses (including

attorney's fees and expenses) related to any claim, investigation, litigation or proceeding

(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or

omissions under these Terms or in any way with respect to the Products.

1. Intellectual Property: The intellectual property embodied in the Products is the exclusive

property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way

without the written permission of Seller. Buyer (at its own expense) shall indemnify and

hold harmless Seller and defend or settle any action brought against Seller to the extent

that it is based on a claim that any Product made to Buyer specifications infringed

intellectual property rights of another party.

2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or

tooling, all engineering and tooling shall remain the exclusive property of Seller. All

information and materials supplied by Seller to Buyer relating to the Products are

confidential and proprietary, and Buyer shall limit distribution thereof to its trusted

employees and strictly prevent disclosure to any third party.

3. Performance Data: Performance data is provided as a guide in determining suitability

and does not constitute a warranty. It may represent the result of Seller's test conditions,

and the users must correlate it to actual application requirements.

4. Change In Specifications: Product specifications and description may be changed at any

time based on improvements or other reasons. It is Seller’s practice to change part

numbers when published ratings or features are changed, or when significant

engineering changes are made. However, some specifications of the Product may be

changed without any notice.

5. Errors And Omissions: The information on Seller’s website or in other documentation

has been carefully checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses

regarding (a) export of the Products or information provided by Seller; (b) sale of

Products to forbidden or other proscribed persons or organizations; (c)disclosure to

non-citizens of regulated technology or information.

1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing

between Buyer and Seller shall operate as a waiver of rights by Seller.

2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.

3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal

and state courts in Illinois have exclusive jurisdiction for any dispute hereunder.

4. Amendment: These Terms constitute the entire agreement between Buyer and Seller

relating to the Products, and no provision may be changed or waived unless in writing

signed by the parties.

5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall

not invalidate any other provision.

I. GENERAL

II. SALES

III. PRECAUTIONS

IV. WARRANTY AND LIMITATION

V. INFORMATION; ETC.

VI. MISCELLANEOUS

14 Miniature Basic Switch D3V

Certain Precautions on Specifications and Use

1. Suitability for Use. Seller shall not be responsible for conformity with any stan-

dards, codes or regulations which apply to the combination of the Product in

Buyer's application or use of the Product. At Buyer's request, Seller will pro-

vide applicable third party certification documents identifying ratings and limi-

tations of use which apply to the Product. This information by itself is not

sufficient for a complete determination of the suitability of the Product in com-

bination with the end product, machine, system, or other application or use.

Buyer shall be solely responsible for determining appropriateness of the par-

ticular Product with respect to Buyer's application, product or system. Buyer

shall take application responsibility in all cases but the following is a non-

exhaustive list of applications for which particular attention must be given:

(i) Outdoor use, uses involving potential chemical contamination or electrical

interference, or conditions or uses not described in this document.

(ii) Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety

equipment, and installations subject to separate industry or government

regulations.

(iii) Use in consumer products or any use in significant quantities.

(iv) Systems, machines and equipment that could present a risk to life or

property. Please know and observe all prohibitions of use applicable to this

product.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS

RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT

THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE

INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

2. Programmable Products. Seller shall not be responsible for the user's

programming of a programmable product, or any consequence thereof.

3. Performance Data. Performance data given in this publication is provided as

a guide for the user in determining suitability and does not constitute a war-

ranty. It may represent the result of Seller's test conditions, and the users must

correlate it to actual application requirements. Actual performance is subject to

Seller's Warranty and Limitations of Liability.

4. Change in Specifications. Product specifications and accessories may be

changed at any time based on improvements and other reasons. It is our prac-

tice to change part numbers when published ratings or features are changed,

or when significant construction changes are made. However, some specifica-

tions of the Product may be changed without any notice. When in doubt, spe-

cial part numbers may be assigned to fix or establish key specifications for

your application. Please consult with your Seller representative at any time to

confirm actual specifications of purchased Product.

5. Errors and Omissions. The information in this publication has been carefully

checked and is believed to be accurate; however, no responsibility is assumed

for clerical, typographical or proofreading errors, or omissions.

6. RoHS Compliance. Where indicated, our products currently comply, to the

best of our knowledge as of the date of this publication, with the requirements

of the European Union's Directive on the Restriction of certain Hazardous

Substances ("RoHS"), although the requirements of RoHS do not take effect

until July 2006. These requirements may be subject to change. Please consult

our website for current information.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.components.omron.com

Cat. No. J01C-E-01 Printed in USA

OMRON ELECTRONIC

COMPONENTS LLC

55 E. Commerce Drive, Suite B

Schaumburg, IL 60173

847-882-2288

01/07 Specifications subject to change without notice

Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website

at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.