BR34 SERIES MINI SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE 40 to 200 Volts CURRENT 3.0 Amperes FEATURES 0.083(2.11) 0.075(1.91) 0.155(3.94) 0.130(3.30) * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * For surface mounted applications * Low profile package * Built-in strain relief * Metal to silicon rectifier. majority carrier conduction * Low power loss,high efficiency * High surge capacity * For use in low voltage high frequency inverters, free wheeling, and polarity protection applications * Lead free in comply with EU RoHS 2002/95/EC directives. 0.096(2.44) 0.083(2.13) 0.012(0.305) 0.006(0.152) MECHANICAL DATA * * * * * Case: JEDEC DO-214AA molded plastic Terminals:Solder plated, solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes positive end (cathode) Standard packaging: 12mm tape (EIA-481) Weight: 0.0032 ounce, 0.092 gram 1 0.185(4.70) 0.160(4.06) 0.050(1.27) 0.030(0.76) 0.220(5.59) 0.200(5.08) 2 Cathode Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. Resistive or inductive load. PARAMETER SYMBOL BR34 BR34A BR35 BR36 BR38 BR39 BR310 BR315 BR320 UNITS Maximum Recurrent Peak Reverse Voltage V RRM 40 45 50 60 80 90 100 150 200 V Maximum RMS Voltage V RMS 28 3 1 .5 35 42 56 63 70 105 140 V Maximum DC Blocking Voltage V DC 40 45 50 60 80 90 100 150 200 V Maximum Average Forward Current IF(AV) 3.0 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 80 A Maximum Forward Voltage at 3.0A ( Notes 1) VF Maximum DC Reverse Current at Rated DC Blocking Voltage TJ=25OC TJ=100OC Typical Thermal Resistance ( Notes 2) Op e ra ti ng J unc ti o n a nd S to ra g e Te mp e ra ture Ra ng e 0.70 0.74 0.80 IR 0.05 20 RJA RJL 75 20 T J ,T S TG -55 to +150 -65 to +175 0.90 V mA O C/W O C NOTES: 1. Pulse Test with PW =300sec, 2% Duty Cycle. 2. Mounted on P.C. Board with 8.0mm 2 (.013mm thick) copper pad areas. March 30,2011-REV.01 PAGE . 1 BR34 SERIES RATING AND CHARACTERISTIC CURVES 3.0 40V 45-200V 2.5 2.0 1.5 1.0 0 0 20 40 60 80 100 120 140 160 180 INSTANTANEOUS REVERSE CURRENT, mA AVERAGE FORWARD RECTIFIED CURRENT AMPERES 10 40V 45-200V O T J =100 C 1.0 T J = 75 O C 0.1 T J = 25 O C .01 .001 0 LEAD TEMPERATURE, OC 20 40 60 100 120 80 140 PERCENT OF INSTANTANEOUS REVERSE VOLTAGE,(%) Fig.1- FORWARD CURRENT DERATING CURVE Fig.2- TYPICAL REVERSE CHARACTERISTIC 90 10 40-45V 80-100V 50-60V 150-200V 1.0 O TJ=25 C f=1.0mHz Visg=5mVp-p 0.1 .4 .5 .6 .7 .8 .9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC March 30,2011-REV.01 PEAK FORWARD SURGE CURRENT, AMPERES INSTANTANEOUS FORWARD CURRENT AMPERES 50 80 8.3ms Single Half Since-Wave JEDEC Method 70 60 50 40 30 20 10 1 2 5 10 20 50 100 NO. OF CYCLE AT 60Hz Fig.4- MAXIMUM NON - REPETITIVE SURGE CURRENT PAGE . 2 BR34 SERIES MOUNTING PAD LAYOUT ORDER INFORMATION * Packing information T/R - 3K per 13" plastic Reel T/R - 0.5Kper 7" plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2012 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. March 30,2011-REV.01 PAGE . 3