SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
1
WWW.TI.COM
DHigh Slew Rate . . . 10.5 V/µs Typ
DHigh-Gain Bandwidth . . . 5.1 MHz Typ
DSupply Voltage Range 2.5 V to 5.5 V
DRail-to-Rail Output
D360 µV Input Offset Voltage
DLow Distortion Driving 600-Ω
0.005% THD+N
D1 mA Supply Current (Per Channel)
D17 nV/√Hz Input Noise Voltage
D2 pA Input Bias Current
DCharacterized From TA = −55°C to 125°C
DAvailable in MSOP and SOT-23 Packages
DMicropower Shutdown Mode ...I
DD < 1 µA
DAvailable in Q-Temp Automotive
High Reliability Automotive Applications
Configuration Control / Print Support
Qualification to Automotive Standards
description
The TLV277x CMOS operational amplifier family combines high slew rate and bandwidth, rail-to-rail output
swing, high output drive, and excellent dc precision. The device provides 10.5 V/µs of slew rate and 5.1 MHz
of bandwidth while only consuming 1 mA of supply current per channel. This ac performance is much higher
than current competitive CMOS amplifiers. The rail-to-rail output swing and high output drive make these
devices a good choice for driving the analog input or reference of analog-to-digital converters. These devices
also have low distortion while driving a 600-Ω load for use in telecom systems.
These amplifiers have a 360-µV input offset voltage, a 17 nV/√Hz input noise voltage, and a 2-pA input bias
current for measurement, medical, and industrial applications. The TLV277x family is also specified across an
extended temperature range (−40°C to 125°C), making it useful for automotive systems, and the military
temperature range (−55°C to 125°C), for military systems.
These devices operate from a 2.5-V to 5.5-V single supply voltage and are characterized at 2.7 V and 5 V. The
single-supply operation and low power consumption make these devices a good solution for portable
applications. The following table lists the packages available.
FAMILY PACKAGE TABLE
DEVICE
NUMBER
OF
PACKAGE TYPES
SHUTDOWN
UNIVERSAL
DEVICE
OF
CHANNELS PDIP CDIP SOIC SOT-23 TSSOP MSOP LCCC CPAK
SHUTDOWN
UNIVERSAL
EVM BOARD
TLV2770 1 8 — 8 — — 8 — — Yes
TLV2771 1 — — 8 5 — — — — —
Refer to the EVM
TLV2772 2 8 8 8 — 8 8 20 10 — Refer to the EVM
Selection Guide
TLV2773 2 14 — 14 — — 10 — — Yes
Selection Guide
(Lit# SLOU060)
TLV2774 4 14 — 14 — 14 — — — —
(Lit# SLOU060)
TLV2775 4 16 — 16 — 16 — — — Yes
A SELECTION OF SINGLE-SUPPLY OPERATIONAL AMPLIFIER PRODUCTS†
DEVICE VDD
(V) BW
(MHz) SLEW RATE
(V/µs) IDD (per channel)
(µA) RAIL-TO-RAIL
TLV277X 2.5 − 6.0 5.1 10.5 1000 O
TLV247X 2.7 − 6.0 2.8 1.5 600 I/O
TLV245X 2.7 − 6.0 0.22 0.11 23 I/O
TLV246X 2.7 − 6.0 6.4 1.6 550 I/O
†All specifications measured at 5 V.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
!"#$% $%&$ $'("&%$ $ )(!% $ "(# %&$ $# )&#
' #*#+)"#$% # %&%! ' #& #*# $&%# $ %# )&,#-.
)#'/$, % #+#%(&+ &(&%#(%
Copyright 1998−2004, Texas Instruments Incorporated
$ )(!% ")+&$% % 01202 &++ )&(&"#%#( &(# %#%#
!$+# %#(3# $%# $ &++ %#( )(!% )(!%$
)(#$, # $% $##&(+/ $+!# %#%$, ' &++ )&(&"#%#(
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
2WWW.TI.COM
TLV2770 and TLV2771 AVAILABLE OPTIONS
VIOmax AT 25°C
PACKAGED DEVICES
TA
V
IO
max AT 25
°
C
(mV) SMALL OUTLINE
(D) SOT-23
(DBV) MSOP
(DGK) PLASTIC DIP
(P)
0°C to 70°C 2.5 TLV2770CD
TLV2771CD —
TLV2771CDBV TLV2770CDGK†
—TLV2770CP
—
−40°C to 125°C
2.5 TLV2770ID
TLV2771ID —
TLV2771IDBV TLV2770IDGK†
—TLV2770IP
—
−40
°
C to 125
°
C
1.6 TLV2770AID
TLV2771AID —
——
—TLV2770AIP
—
†This device is in the Product Preview stage of development. Please contact your local TI sales office for availability.
TLV2772 and TLV2773 AVAILABLE OPTIONS
VIOmax AT 25°C
PACKAGED DEVICES
TA
V
IO
max AT 25
°
C
(mV) SMALL OUTLINE
(D) MSOP
(DGK) MSOP
(DGS) PLASTIC DIP
(N) PLASTIC DIP
(P)
0°C to 70°C 2.5 TLV2772CD
TLV2773CD TLV2772CDGK
——
TLV2773CDGS —
TLV2773CN TLV2772CP
—
−40°C to 125°C
2.5 TLV2772ID
TLV2773ID TLV2772IDGK
——
TLV2773IDGS —
TLV2773IN TLV2772IP
—
−40°C to 125°C1.6 TLV2772AID
TLV2773AID —
——
——
TLV2773AIN TLV2772AIP
—
TLV2774 and TLV2775 AVAILABLE OPTIONS
VIOmax AT 25°C
PACKAGED DEVICES
TA
V
IO
max AT 25
°
C
(mV) SMALL OUTLINE
(D) PLASTIC DIP
(N) PLASTIC DIP
(P) TSSOP
(PW)
0°C to 70°C 2.7 TLV2774CD
TLV2775CD —
TLV2775CN TLV2774CP
—TLV2774CPW
TLV2775CPW
−40°C to 125°C
2.7 TLV2774ID
TLV2775ID —
TLV2775IN TLV2774IP
—TLV2774IPW
TLV2775IPW
−40°C to 125°C2.1 TLV2774AID
TLV2775AID —
TLV2775AIN TLV2774AIP
—TLV2774AIPW
TLV2775AIPW
TLV2772M/Q AND TLV2772AM/Q AVAILABLE OPTIONS
PACKAGED DEVICES
TAVIOmax AT 25°C
(mV) SMALL
OUTLINE
(D)
CHIP CARRIER
(FK) CERAMIC DIP
(JG)
CERAMIC
FLATPACK
(U)
TSSOP
(PW)
−40°C to 125°C
2.5 TLV2772QD‡— — — TLV2772QPW‡
−40°C to 125°C1.6 TLV2772AQD‡— — — TLV2772AQPW‡
−55°C to 125°C
2.5 TLV2772MD TLV2772MFK TLV2772MJG TLV2772MU —
−55
°
C to 125
°
C
1.6 TLV2772AMD TLV2772AMFK TLV2772AMJG TLV2772AMU —
‡Available in tape and reel
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
3
WWW.TI.COM
PACKAGE SYMBOLS
PACKAGE TYPE PINS PART NUMBER SYMBOL†
SOT23
5 Pin
TLV2771CDBV VAMC
SOT23 5 Pin TLV2771IDBV VAMI
TLV2770CDGK xxTIABO
8 Pin
TLV2770IDGK xxTIABP
MSOP
8 Pin TLV2772CDGK xxTIAAF
MSOP TLV2772IDGK xxTIAAG
10 Pin
TLV2773CDGS xxTIABQ
10 Pin TLV2773IDGS xxTIABR
†xx represents the device date code.
TLV277x PACKAGE PINOUT
NC − No internal connection
3212019
910111213
4
5
6
7
8
18
17
16
15
14
NC
2OUT
NC
2IN−
NC
NC
1IN−
NC
1IN+
NC
NC
1OUT
NC
2IN+
NC NC
NC
NC VDD+
TLV2772M AND TLV2772AM
FK PACKAGE
(TOP VIEW)
GND
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
4WWW.TI.COM
TLV277x PACKAGE PINOUTS(1)
1
2
3
4
5
10
9
8
7
6
1OUT
1IN−
1IN+
GND
1SHDN
VDD
2OUT
2IN−
2IN+
2SHD
N
3
2
4
5
(TOP VIEW)
1
OUT
GND
IN+
VDD
IN−
TLV2771
DBV PACKAGE
TLV2773
DGS PACKAGE
(TOP VIEW)
1
2
3
4
8
7
6
5
1OUT
1IN−
1IN+
GND
VDD
2OUT
2IN−
2IN+
TLV2772
D, DGK, JG, P, OR PW PACKAGE
(TOP VIEW)
1
2
3
4
8
7
6
5
NC
IN−
IN+
GND
SHDN
VDD
OUT
NC
TLV2770
D, DGK† OR P PACKAGE
(TOP VIEW)
1
2
3
4
8
7
6
5
NC
IN−
IN+
GND
NC
VDD
OUT
NC
TLV2771
D PACKAGE
(TOP VIEW)
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN−
1IN+
GND
NC
1SHDN
NC
VDD
2OUT
2IN−
2IN+
NC
2SHDN
NC
(TOP VIEW)
TLV2773
D OR N PACKAGE
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN−
1IN+
VDD
2IN+
2IN−
2OUT
4OUT
4IN−
4IN+
GND
3IN+
3IN−
3OUT
(TOP VIEW)
TLV2774
D, N, OR PW PACKAGE
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
1OUT
1IN−
1IN+
VDD
2IN+
2IN−
2OUT
1/2SHDN
4OUT
4IN−
4IN+
GND
3IN+
3IN−
3OUT
3/4SHD
N
(TOP VIEW)
TLV2775
D, N, OR PW PACKAGE
NC
VDD +
2OUT
2IN −
2IN +
NC
1OUT
1IN −
1IN +
GND
10
9
8
7
6
(TOP VIEW)
TLV2772M AND TLV2772AM
U PACKAGE
†This device is in the Product Preview stage of development. Please contact your local TI sales office for availability.
1
2
3
4
5
(1) SOT−23 may or may not be indicated
TYPICAL PIN 1 INDICATORS
Printed or
Molded Dot Bevel Edges
Pin 1
Molded ”U” Shape
Pin 1
Stripe Pin 1 Pin 1
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
5
WWW.TI.COM
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VDD (see Note 1) 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential input voltage, VID (see Note 2) ±VDD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VI (any input, see Note 1) −0.3 V to VDD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input current, II (any input) ±4 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current, IO ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total current into VDD+ ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total current out of GND ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Duration of short-circuit current (at or below) 25°C (see Note 3) unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, TA: C suffix 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I suffix −40°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q suffix −40°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M suffix −55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg −65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to GND.
2. Differential voltages are at the noninverting input with respect to the inverting input. Excessive current flows when input is brought
below GND − 0.3 V.
3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
TA
≤
25
°
C
DERATING FACTOR
TA = 70
°
C
TA = 85
°
C
TA = 125
°
C
PACKAGE
TA ≤ 25 C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70 C
POWER RATING
TA = 85 C
POWER RATING
TA = 125 C
POWER RATING
D725 mW 5.8 mW/°C464 mW 377 mW 145 mW
DBV 437 mW 3.5 mW/°C280 mW 227 mW 87 mW
DGK 424 mW 3.4 mW/°C271 mW 220 mW 85 mW
DGS 424 mW 3.4 mW/°C271 mW 220 mW 85 mW
FK 1375 mW 11.0 mW/°C672 mW 546 mW 210 mW
JG 1050 mW 8.4 mW/°C880 mW 714 mW 275 mW
N1150 mW 9.2 mW/°C736 mW 598 mW 230 mW
P1000 mW 8.0 mW/°C640 mW 520 mW 200 mW
PW 700 mW 5.6 mW/°C448 mW 364 mW 140 mW
U675 mW 5.4 mW/°C432 mW 350 mW 135 mW
recommended operating conditions
C SUFFIX I SUFFIX Q SUFFIX M SUFFIX
UNIT
MIN MAX MIN MAX MIN MAX MIN MAX
UNIT
Supply voltage, VDD 2.5 6 2.5 6 2.5 6 2.5 6 V
Input voltage range, VIGND VDD+ −1.3 GND VDD+ −1.3 GND VDD+ −1.3 GND VDD+ −1.3 V
Common-mode input voltage, VIC GND VDD+ −1.3 GND VDD+ −1.3 GND VDD+ −1.3 GND VDD+ −1.3 V
Operating free-air temperature, TA0 70 −40 125 −40 125 −55 125 °C
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
6WWW.TI.COM
electrical characteristics at specified free-air temperature, VDD = 2.7 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLV277xC
UNIT
PARAMETER
TEST CONDITIONS
TA
†
MIN TYP MAX
UNIT
TLV2770/1/2
V = 0,
V = 0,
25°C 0.48 2.5
VIO
Input offset voltage
TLV2770/1/2 VIC = 0,
RS = 50 Ω,
VO = 0,
VDD = ±1.35 V,
Full range 0.53 2.7
mV
VIO Input offset voltage
TLV2773/4/5
R
S
= 50
Ω
,
No load
O
V
DD
=
±
1.35 V,
25°C 0.8 2.7 mV
TLV2773/4/5
No load
Full range 0.86 2.9
VIO
Temperature coefficient of input
25
°
C to
2
V/°C
αVIO
Temperature coefficient of input
offset voltage
25 C to
125°C2µV/°C
IIO
Input offset current
VIC = 0,
VO = 0,
25°C 1 60
pA
IIO Input offset current
VIC = 0,
R
S
= 50 Ω
VO = 0,
VDD = ±1.35 V Full range 2 100 pA
IIB
Input bias current
RS = 50 Ω
VDD = 1.35 V
25°C 2 60
pA
IIB Input bias current Full range 6 100 pA
IOH = −0.675 mA
25°C 2.6
VOH
High-level output voltage
IOH = −0.675 mA Full range 2.5
V
VOH High-level output voltage
IOH = −2.2 mA
25°C 2.4 V
IOH = −2.2 mA Full range 2.1
VIC = 1.35 V,
IOL = 0.675 mA
25°C 0.1
VOL
Low-level output voltage
VIC = 1.35 V, IOL = 0.675 mA Full range 0.2
V
VOL Low-level output voltage
VIC = 1.35 V,
IOL = 2.2 mA
25°C 0.21 V
VIC = 1.35 V, IOL = 2.2 mA Full range 0.6
AVD
Large-signal differential voltage
VIC = 1.35 V,
RL = 10 k
Ω
,
25°C 20 380
V/mV
AVD
Large-signal differential voltage
amplification
VIC = 1.35 V,
VO = 0.6 V to 2.1 V
RL = 10 kΩ,
Full range 13 V/mV
ri(d) Differential input resistance 25°C 1012 Ω
ci(c) Common-mode input capacitance f = 10 kHz 25°C 8 pF
zoClosed-loop output impedance f = 100 kHz, AV = 10 25°C 25 Ω
CMRR
Common-mode rejection ratio
VIC = 0 to 1.5 V,
VO = VDD/2,
25°C 60 84
dB
CMRR Common-mode rejection ratio
VIC = 0 to 1.5 V,
RS = 50 Ω
VO = VDD/2,
Full range 60 82 dB
kSVR
Supply voltage rejection ratio
VDD = 2.7 V to 5 V,
VIC = VDD/2,
25°C 70 89
dB
kSVR
Supply voltage rejection ratio
(∆VDD /∆VIO)
VDD = 2.7 V to 5 V,
No load
VIC = VDD/2,
Full range 70 84 dB
IDD
Supply current (per channel)
VO = VDD/2,
No load
25°C 1 2
mA
I
DD
Supply current (per channel)
V
O
= V
DD
/2,
No load
Full range 2
mA
IDD(SHDN)
Supply current in shutdown (per
25°C 0.8 1.5
µA
I
DD(SHDN
)
Supply current in shutdown (per
channel) Full range 1.3 2 µ
A
Turnon voltage
TLV2770 1.47
V
(ON)
Turnon voltage
level
TLV2773 A
V
= 5 25°C1.43 V
V(ON)
level
TLV2775
AV = 5
25 C
1.40
V
Turnoff voltage
TLV2770 1.27
V
(OFF)
Turnoff voltage
level
TLV2773 A
V
= 5 25°C1.21 V
V(OFF)
level
TLV2775
AV = 5
25 C
1.20
V
†Full range is 0°C to 70°C.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
7
WWW.TI.COM
operating characteristics at specified free-air temperature, VDD = 2.7 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLV277xC
UNIT
PARAMETER
TEST CONDITIONS
TA
†
MIN TYP MAX
UNIT
VO(PP) = 0.8 V,
CL = 100 pF,
25°C5 9
SR Slew rate at unity gain VO(PP) = 0.8 V,
RL = 10 kΩCL = 100 pF
,
Full
range 4.7 6 V/µs
Vn
Equivalent input noise voltage
f = 1 kHz 25°C 21
nV/√Hz
VnEquivalent input noise voltage f = 10 kHz 25°C 17
nV/√Hz
VN(PP)
Peak-to-peak equivalent input noise voltage
f = 0.1 Hz to 1 Hz
25°C
0.33
V
VN(PP) Peak-to-peak equivalent input noise voltage f = 0.1 Hz to 10 Hz 25°C0.86 µV
InEquivalent input noise current f = 100 Hz 25°C 0.6 fA/√Hz
RL = 600 Ω,
AV = 1 0.0085%
THD + N Total harmonic distortion plus noise RL = 600 Ω,
f = 1 kHz
AV = 10 25°C0.025%
THD + N
Total harmonic distortion plus noise
f = 1 kHz
AV = 100
25 C
0.12%
Gain-bandwidth product f = 10 kHz,
CL = 100 pF RL = 600 Ω,25°C 4.8 MHz
ts
Settling time
AV = −1,
Step = 1 V,
0.1% 25°C 0.186
s
tsSettling time
Step = 1 V,
RL = 600 Ω,
C
L
= 100 pF 0.01% 25°C 0.3 µs
φmPhase margin at unity gain
RL = 600 Ω,
CL = 100 pF
25°C 46°
Gain margin
R
L
= 600
Ω
,
C
L
= 100 pF
25°C 12 dB
†Full range is 0°C to 70°C.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
8WWW.TI.COM
electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLV277xC
UNIT
PARAMETER
TEST CONDITIONS
T
A
†
MIN TYP MAX
UNIT
TLV2770/1/2
V = 0,
V = 0,
25°C 0.5 2.5
VIO
Input offset voltage
TLV2770/1/2 VIC = 0,
RS = 50 Ω
VO = 0,
VDD = ±2.5 V,
Full range 0.6 2.7
mV
VIO Input offset voltage
TLV2773/4/5
R
S
= 50
Ω,
No load
O
V
DD
=
±
2.5 V,
25°C 0.7 2.5 mV
TLV2773/4/5
No load
Full range 0.78 2.7
VIO
Temperature coefficient of input
25
°
C to
2
V/°C
αVIO
Temperature coefficient of input
offset voltage
25 C to
125°C2µV/°C
IIO
Input offset current
VIC = 0,
VO = 0,
25°C 1 60
pA
IIO Input offset current
VIC = 0,
R
S
= 50 Ω
VO = 0,
VDD = ±2.5 V Full range 2 100 pA
IIB
Input bias current
RS = 50 Ω
VDD = 2.5 V
25°C 2 60
pA
IIB Input bias current Full range 6 100 pA
IOH = −1.3 mA
25°C 4.9
VOH
High-level output voltage
IOH = −1.3 mA Full range 4.8
V
VOH High-level output voltage
IOH = −4.2 mA
25°C 4.7 V
IOH = −4.2 mA Full range 4.4
VIC = 2.5 V,
IOL = 1.3 mA
25°C 0.1
VOL
Low-level output voltage
VIC = 2.5 V, IOL = 1.3 mA Full range 0.2
V
VOL Low-level output voltage
VIC = 2.5 V,
IOL = 4.2 mA
25°C 0.21 V
VIC = 2.5 V, IOL = 4.2 mA Full range 0.6
AVD
Large-signal differential voltage
VIC = 2.5 V,
RL = 10 k
Ω
,
25°C 20 450
V/mV
AVD
Large-signal differential voltage
amplification
VIC = 2.5 V,
VO = 1 V to 4 V
RL = 10 kΩ,
Full range 13 V/mV
ri(d) Differential input resistance 25°C 1012 Ω
ci(c) Common-mode input capacitance f = 10 kHz 25°C 8 pF
zoClosed-loop output impedance f = 100 kHz, AV = 10 25°C 20 Ω
CMRR
Common-mode rejection ratio
VIC = 0 to 3.7 V,
VO = VDD/2,
25°C 70 96
dB
CMRR Common-mode rejection ratio
VIC = 0 to 3.7 V,
RS = 50 Ω
VO = VDD/2,
Full range 70 93 dB
kSVR
Supply voltage rejection ratio
VDD = 2.7 V to 5 V,
VIC = VDD/2,
25°C 70 89
dB
kSVR
Supply voltage rejection ratio
(∆VDD /∆VIO)
VDD = 2.7 V to 5 V,
No load
VIC = VDD/2,
Full range 70 84 dB
IDD
Supply current (per channel)
VO = VDD/2,
No load
25°C 1 2
mA
I
DD
Supply current (per channel)
V
O
= V
DD
/2,
No load
Full range 2
mA
IDD(SHDN)
Supply current in shutdown (per
25°C 0.8 1.5
A
IDD(SHDN
)
Supply current in shutdown (per
channel) Full range 1.3 2 µA
TLV2770 2.59
V
(ON)
Turnon voltage level TLV2773 A
V
= 5 25°C2.47 V
V(ON)
Turnon voltage level
TLV2775
AV = 5
25 C
2.48
V
TLV2770 2.41
V
(OFF)
Turnoff voltage level TLV2773 A
V
= 5 25°C2.32 V
V(OFF)
Turnoff voltage level
TLV2775
AV = 5
25 C
2.29
V
†Full range is 0°C to 70°C.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
9
WWW.TI.COM
operating characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLV277xC
UNIT
PARAMETER
TEST CONDITIONS
TA
†
MIN TYP MAX
UNIT
VO(PP) = 2 V,
CL = 100 pF,
25°C5 10.5
SR Slew rate at unity gain VO(PP) = 2 V,
RL = 10 kΩCL = 100 pF
,
Full
range 4.7 6 V/µs
Vn
Equivalent input noise voltage
f = 1 kHz 25°C 17
nV/√Hz
VnEquivalent input noise voltage f = 10 kHz 25°C 12
nV/√Hz
VN(PP)
Peak-to-peak equivalent input noise voltage
f = 0.1 Hz to 1 Hz
25°C
0.33
V
VN(PP) Peak-to-peak equivalent input noise voltage f = 0.1 Hz to 10 Hz 25°C0.86 µV
InEquivalent input noise current f = 100 Hz 25°C 0.6 fA/√Hz
RL = 600 Ω,
AV = 1 0.005%
THD + N Total harmonic distortion plus noise RL = 600 Ω,
f = 1 kHz
AV = 10 25°C0.016%
THD + N
Total harmonic distortion plus noise
f = 1 kHz
AV = 100
25 C
0.095%
Gain-bandwidth product f = 10 kHz,
CL = 100 pF RL = 600 Ω,25°C 5.1 MHz
ts
Settling time
AV = −1,
Step = 2 V,
0.1% 25°C 0.335
s
tsSettling time
Step = 2 V,
RL = 600 Ω,
C
L
= 100 pF 0.01% 25°C 0.6 µs
φmPhase margin at unity gain
RL = 600 Ω,
CL = 100 pF
25°C 46°
Gain margin
R
L
= 600
Ω
,
C
L
= 100 pF
25°C 12 dB
TLV2770
AV = 5, RL = Open,
1.2
t
(ON)
Amplifier turnon time TLV2773 AV = 5, RL = Open,
Measured to 50% point
25°C2.4 µs
t(ON)
Amplifier turnon time
TLV2775
Measured to 50% point
25 C
1.9
µs
TLV2770
AV = 5 RL = Open,
335
t
(OFF)
Amplifier turnoff time TLV2773 AV = 5 RL = Open,
Measured to 50% point
25°C444 ns
t(OFF)
Amplifier turnoff time
TLV2775
Measured to 50% point
25 C
345
ns
†Full range is 0°C to 70°C.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
10 WWW.TI.COM
electrical characteristics at specified free-air temperature, VDD = 2.7 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLV277xI TLV277xAI
UNIT
PARAMETER
TEST CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
TLV2770/1/2
VIC = 0, VO = 0,
25°C 0.48 2.5 0.48 1.6
VIO
Input offset
TLV2770/1/2
VIC = 0, VO = 0,
R
S
= 50 ΩFull range 0.53 2.7 0.53 1.9
mV
VIO
Input offset
voltage
TLV2773/4/5
RS = 50 Ω
VDD = ±1.35 V,
No load
25°C 0.8 2.7 0.8 2.1 mV
voltage
TLV2773/4/5
VDD = 1.35 V,
No load Full range 0.86 2.9 0.86 2.2
VIO
Temperature coefficient of input
25
°
C to
2
2
V/°C
αVIO
Temperature coefficient of input
offset voltage
25 C to
125°C2 2 µV/°C
IIO
Input offset current
VIC = 0, VO = 0,
25°C 1 60 1 60
pA
IIO Input offset current
VIC = 0, VO = 0,
R
S
= 50 ΩFull range 2 125 2 125 pA
IIB
Input bias current
RS = 50 Ω
25°C 2 60 2 60
pA
IIB Input bias current Full range 6 350 6 350 pA
IOH = −0.675 mA
25°C 2.6 2.6
VOH
High-level output voltage
IOH = −0.675 mA Full range 2.5 2.5
V
VOH High-level output voltage
IOH = −2.2 mA
25°C 2.4 2.4 V
IOH = −2.2 mA Full range 2.1 2.1
VIC = 1.35 V,
25°C 0.1 0.1
VOL
Low-level output voltage
VIC = 1.35 V,
IOL = 0.675 mA Full range 0.2 0.2
V
VOL Low-level output voltage
VIC = 1.35 V,
25°C 0.21 0.21 V
VIC = 1.35 V,
IOL = 2.2 mA Full range 0.6 0.6
AVD
Large-signal differential voltage
VIC = 1.35 V,
RL = 10 kΩ
25°C 20 380 20 380
V/mV
AVD
Large-signal differential voltage
amplification
IC
R
L
= 10 k
Ω,
VO = 0.6 V to 2.1 V Full range 13 13 V/mV
ri(d) Differential input resistance 25°C 1012 1012 Ω
ci(c) Common-mode input
capacitance f = 10 kHz, 25°C 8 8 pF
zoClosed-loop output impedance f = 100 kHz,
AV = 10 25°C 25 25 Ω
CMRR
Common-mode rejection ratio
VIC = 0 to 1.5 V,
VO = VDD/2,
25°C 60 84 60 84
dB
CMRR Common-mode rejection ratio
IC
V
O
= V
DD
/2,
R
S
= 50 ΩFull range 60 82 60 82 dB
kSVR
Supply voltage rejection ratio
VDD = 2.7 V to 5 V
,
VIC = VDD/2,
25°C 70 89 70 89
dB
kSVR
Supply voltage rejection ratio
(∆VDD /∆VIO)
DD
V
IC
= V
DD
/2,
No load Full range 70 84 70 84 dB
IDD
Supply current (per channel)
VO = VDD/2,
25°C 1 2 1 2
mA
I
DD
Supply current (per channel)
VO = VDD/2,
No load Full range 2 2
mA
IDD(SHDN)
Supply current in shutdown (per
25°C 0.8 1.5 0.8 1.5
µA
I
DD(SHDN
)
Supply current in shutdown (per
channel) Full range 1.3 2 1.3 2 µ
A
†Full range is − 40°C to 125°C.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
11
WWW.TI.COM
electrical characteristics at specified free-air temperature, VDD = 2.7 V (unless otherwise noted)
(continued)
PARAMETER
TEST
TA†
TLV277xI TLV277xAI
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
TLV2770 1.47 1.47
V
(ON)
Turnon voltage level TLV2773 A
V
= 5 25°C1.43 1.43 V
V(ON)
Turnon voltage level
TLV2775
AV = 5
25 C
1.40 1.4
V
TLV2770 1.27 1.27
V
(OFF)
Turnoff voltage level TLV2773 A
V
= 5 25°C1.21 1.21 V
V(OFF)
Turnoff voltage level
TLV2775
AV = 5
25 C
1.20 1.2
V
†Full range is − 40°C to 125°C.
operating characteristics at specified free-air temperature, VDD = 2.7 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLV277xI TLV277xAI
UNIT
PARAMETER
TEST CONDITIONS
TA
†
MIN TYP MAX MIN TYP MAX
UNIT
VO(PP) = 0.8 V,
CL = 100 pF,
25°C5 9 5 9
SR Slew rate at unity gain VO(PP) = 0.8 V
,
RL = 10 kΩCL = 100 pF
,
Full
range 4.7 6 4.7 6 V/µs
Vn
Equivalent input noise
f = 1 kHz 25°C 21 21
nV/√Hz
Vn
Equivalent input noise
voltage f = 10 kHz 25°C 17 17
nV/√Hz
VN(PP)
Peak-to-peak
equivalent input noise
f = 0.1 Hz to 1 Hz 25°C 0.33 0.33 µV
VN(PP)
equivalent input noise
voltage f = 0.1 Hz to 10 Hz 25°C 0.86 0.86 µV
InEquivalent input noise
current f = 100 Hz 25°C 0.6 0.6 fA/√Hz
Total harmonic
RL = 600 Ω,
AV = 1 0.0085% 0.0085%
THD + N Total harmonic
distortion plus noise
RL = 600 Ω,
f = 1 kHz
AV = 10 25°C0.025% 0.025%
THD + N
distortion plus noise
f = 1 kHz
AV = 100
25 C
0.12% 0.12%
Gain-bandwidth
product f = 10 kHz,
CL = 100 pF RL = 600 Ω,25°C 4.8 4.8 MHz
ts
Settling time
AV = −1,
Step = 0.85 V to
1.85 V,
0.1% 25°C 0.186 0.186
s
tsSettling time
1.85 V,
RL = 600 Ω,
C
L
= 100 pF 0.01% 25°C 3.92 3.92
µs
φmPhase margin at unity
gain R
L
= 600 Ω, C
L
= 100 pF 25°C 46°46°
Gain margin
RL = 600 Ω,
CL = 100 pF
25°C 12 12 dB
†Full range is −40°C to 125°C.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
12 WWW.TI.COM
electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
TEST
TA†
TLV277xI TLV277xAI
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
TLV2770/1/2
VIC = 0, No load
25°C 0.5 2.5 0.5 1.6
VIO
Input offset voltage
TLV2770/1/2
VIC = 0, No load
V
O
= 0, Full range 0.6 2.7 0.6 1.9
mV
VIO Input offset voltage
TLV2773/4/5
VO = 0,
RS = 50 Ω,
V = 2.5 V
25°C 0.7 2.5 0.7 2.1 mV
TLV2773/4/5
RS = 50 ,
VDD = ±2.5 V Full range 0.78 2.7 0.78 2.2
VIO
Temperature coefficient of input
25
°
C to
2
2
V/°C
αVIO
Temperature coefficient of input
offset voltage
VIC = 0,
25 C to
125°C2 2 µV/°C
IIO
Input offset current
VIC = 0,
VO = 0,
25°C 1 60 1 60
pA
IIO Input offset current
VO = 0,
R
S
= 50 Ω,
V = 2.5 V
Full range 2 125 2 125 pA
IIB
Input bias current
RS = 50 ,
VDD = ±2.5 V 25°C 2 60 2 60
pA
IIB Input bias current
DD
Full range 6 350 6 350 pA
IOH = −1.3 mA
25°C 4.9 4.9
VOH
High-level output voltage
IOH = −1.3 mA Full range 4.8 4.8
V
VOH High-level output voltage
IOH = −4.2 mA
25°C 4.7 4.7 V
IOH = −4.2 mA Full range 4.4 4.4
VIC = 2.5 V,
25°C 0.1 0.1
VOL
Low-level output voltage
VIC = 2.5 V,
IOL = 1.3 mA Full range 0.2 0.2
V
VOL Low-level output voltage
VIC = 2.5 V,
25°C 0.21 0.21 V
VIC = 2.5 V,
IOL = 4.2 mA Full range 0.6 0.6
AVD
Large-signal differential voltage
VIC = 2.5 V,
RL = 10 kΩ
25°C 20 450 20 450
V/mV
AVD
Large-signal differential voltage
amplification
IC
R
L
= 10 k
Ω,
VO = 1 V to 4 V Full range 13 13 V/mV
ri(d) Differential input resistance 25°C 1012 1012 Ω
ci(c) Common-mode input capacitance f = 10 kHz 25°C 8 8 pF
zoClosed-loop output impedance f = 100 kHz,
AV = 10 25°C 20 20 Ω
CMRR
Common-mode rejection ratio
VIC = 0 to 3.7 V,
VO = VDD/2,
25°C 60 96 70 96
dB
CMRR Common-mode rejection ratio
IC
V
O
= V
DD
/2,
RS = 50 ΩFull range 60 93 70 93 dB
kSVR
Supply voltage rejection ratio
VDD = 2.7 V to 5 V
,
VIC = VDD/2,
25°C 70 89 70 89
dB
kSVR
Supply voltage rejection ratio
(∆VDD /∆VIO)
DD
V
IC
= V
DD
/2,
No load Full range 70 84 70 84 dB
IDD
Supply current (per channel)
VO = VDD/2,
25°C 1 2 1 2
mA
I
DD
Supply current (per channel)
VO = VDD/2,
No load Full range 2 2
mA
IDD(SHDN)
Supply current shutdown (per
25°C 0.8 1.5 0.8 1.5
A
IDD(SHDN
)
Supply current shutdown (per
channel) Full range 1.3 2 1.3 2 µA
†Full range is − 40°C to 125°C.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
13
WWW.TI.COM
electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
(continued)
PARAMETER
TEST
TA†
TLV277xI TLV277xAI
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
TLV2770 2.59 2.59
V
(ON)
Turnon voltage level TLV2773 A
V
= 5 25°C2.47 2.47 V
V(ON)
Turnon voltage level
TLV2775
AV = 5
25 C
2.48 2.48
V
TLV2770 2.41 2.41
V
(OFF)
Turnoff voltage level TLV2773 A
V
= 5 25°C2.32 2.32 V
V(OFF)
Turnoff voltage level
TLV2775
AV = 5
25 C
2.29 2.29
V
†Full range is − 40°C to 125°C.
operating characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLV277xI TLV277xAI
UNIT
PARAMETER
TEST CONDITIONS
TA
†
MIN TYP MAX MIN TYP MAX
UNIT
VO(PP) = 1.5 V,
CL = 100 pF,
25°C5 10.5 5 10.5
SR Slew rate at unity gain VO(PP) = 1.5 V
,
RL = 10 kΩCL = 100 pF
,
Full
range 4.7 6 4.7 6 V/µs
Vn
Equivalent input noise
f = 1 kHz 25°C 17 17
nV/√Hz
Vn
Equivalent input noise
voltage f = 10 kHz 25°C 12 12
nV/√Hz
VN(PP)
Peak-to-peak
equivalent input
f = 0.1 Hz to 1 Hz 25°C 0.33 0.33 µV
VN(PP)
equivalent input
noise voltage f = 0.1 Hz to 10 Hz 25°C 0.86 0.86 µV
InEquivalent input noise
current f = 100 Hz 25°C 0.6 0.6 fA/√Hz
Total harmonic
RL = 600 Ω,
AV = 1 0.005% 0.005%
THD + N Total harmonic
distortion plus noise
RL = 600 Ω,
f = 1 kHz
AV = 10 25°C0.016% 0.016%
THD + N
distortion plus noise
f = 1 kHz
AV = 100
25 C
0.095% 0.095%
Gain-bandwidth
product f = 10 kHz,
CL = 100 pF RL = 600 Ω,25°C 5.1 5.1 MHz
ts
Settling time
AV = −1,
Step = 1.5 V to
3.5 V,
0.1% 25°C 0.134 0.134
s
tsSettling time
3.5 V,
RL = 600 Ω,
C
L
= 100 pF 0.01% 25°C 1.97 1.97
µs
φmPhase margin at unity
gain R
L
= 600 Ω, C
L
= 100 pF 25°C 46°46°
Gain margin
RL = 600 Ω,
CL = 100 pF
25°C 12 12 dB
Amplifier
TLV2770
AV = 5,
1.2 1.2
t(ON)
Amplifier
turnon
time
TLV2773
AV = 5,
RL = Open,
Measured to 50% point
25°C2.4 2.4 µs
t(ON)
turnon
time TLV2775
RL = Open,
Measured to 50% point
25 C
1.9 1.9
µs
Amplifier
TLV2770
AV = 5,
335 335
t(OFF)
Amplifier
turnoff
time
TLV2773
AV = 5,
RL = Open,
Measured to 50% point
25°C444 444 ns
t(OFF)
turnoff
time TLV2775
RL = Open,
Measured to 50% point
25 C
345 345
ns
†Full range is −40°C to 125°C.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
14 WWW.TI.COM
electrical characteristics at specified free-air temperature, VDD = 2.7 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA
†TLV2772Q
TLV2772M TLV2772AQ
TLV2772AM
UNIT
PARAMETER
TEST CONDITIONS
TA†
MIN TYP MAX MIN TYP MAX
UNIT
VIO
Input offset voltage
25°C 0.44 2.5 0.44 1.6
mV
VIO Input offset voltage Full range 0.47 2.7 0.47 1.9 mV
VIO
Temperature
coefficient of input
V = 1.35 V,
25°C
to
2
2
V/°C
αVIO
coefficient of input
offset voltage VDD = ±1.35 V,
VIC = 0,
VO = 0,
to
125°C2 2 µV/°C
IIO
Input offset current
VIC = 0,
R
S
= 50 Ω
O
25°C 1 60 1 60
pA
IIO Input offset current
RS = 50
Full range 2 125 2 125 pA
IIB
Input bias current
25°C 2 60 2 60
pA
IIB Input bias current Full range 6 350 6 350 pA
0
−0.3
0
−0.3
25
°
C
0
to
−0.3
to
0
to
−0.3
to
VICR
Common-mode
CMRR > 60 dB,
RS = 50 Ω
25 C
to
1.4
to
1.7
to
1.4
to
1.7
V
VICR
Common-mode
input voltage range CMRR > 60 dB, RS = 50 Ω
0
−0.3
0
−0.3
V
input voltage range
Full range
0
to
−0.3
to
0
to
−0.3
to
Full range
to
1.4
to
1.7
to
1.4
to
1.7
IOH = −0.675 mA
25°C 2.6 2.6
VOH
High-level output
IOH = −0.675 mA Full range 2.45 2.45
V
VOH
High-level output
voltage
IOH = −2.2 mA
25°C 2.4 2.4 V
voltage
IOH = −2.2 mA Full range 2.1 2.1
VIC = 1.35 V,
IOL = 0.675 mA
25°C 0.1 0.1
VOL
Low-level output
VIC = 1.35 V, IOL = 0.675 mA Full range 0.2 0.2
V
VOL
Low-level output
voltage
VIC = 1.35 V,
IOL = 2.2 mA
25°C 0.21 0.21 V
voltage
VIC = 1.35 V, IOL = 2.2 mA Full range 0.6 0.6
AVD
Large-signal
differential voltage
VIC = 1.35 V,
RL = 10 k
Ω
,
‡25°C 20 380 20 380
V/mV
AVD
differential voltage
amplification
VIC = 1.35 V,
VO = 0.6 V to 2.1 V
RL = 10 kΩ,‡
Full range 13 13 V/mV
ri(d) Differential input
resistance 25°C 1012 1012 Ω
ci(c) Common-mode
input capacitance f = 10 kHz, 25°C 8 8 pF
zoClosed-loop
output impedance f = 100 kHz, AV = 10 25°C 25 25 Ω
CMRR
Common-mode
VIC = VICR (min),
VO = 1.5 V,
25°C 60 84 60 84
dB
CMRR
Common-mode
rejection ratio
VIC = VICR (min),
RS = 50 Ω
VO = 1.5 V,
Full range 60 82 60 82 dB
kSVR
Supply voltage
rejection ratio
VDD = 2.7 V to 5 V,
VIC = VDD/2,
25°C 70 89 70 89
dB
kSVR
rejection ratio
(∆VDD /∆VIO)
VDD = 2.7 V to 5 V,
No load
VIC = VDD/2,
Full range 70 84 70 84 dB
IDD
Supply current
VO = 1.5 V,
No load
25°C 1 2 1 2
mA
I
DD
Supply current
(per channel)
V
O
= 1.5 V,
No load
Full range 2 2
mA
†Full range is −40°C to 125°C for Q level part, −55°C to 125°C for M level part.
‡Referenced to 1.35 V
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
15
WWW.TI.COM
operating characteristics at specified free-air temperature, VDD = 2.7 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA
†TLV2772Q
TLV2772M TLV2772AQ
TLV2772AM
UNIT
PARAMETER
TEST CONDITIONS
TA†
MIN TYP MAX MIN TYP MAX
UNIT
VO(PP) = 0.8 V,
CL = 100 pF,
25°C5 9 5 9
SR Slew rate at unity gain VO(PP) = 0.8 V
,
RL = 10 kΩCL = 100 pF
,
Full
range 4.7 6 4.7 6 V/µs
Vn
Equivalent input
f = 1 kHz 25°C 21 21
nV/√Hz
Vn
Equivalent input
noise voltage f = 10 kHz 25°C 17 17
nV/√Hz
VN(PP)
Peak-to-peak
equivalent input
f = 0.1 Hz to 1 Hz 25°C 0.33 0.33 µV
VN(PP)
equivalent input
noise voltage f = 0.1 Hz to 10 Hz 25°C 0.86 0.86 µV
InEquivalent input
noise current f = 100 Hz 25°C 0.6 0.6 fA/√Hz
Total harmonic
RL = 600 Ω,
AV = 1 0.0085% 0.0085%
THD + N Total harmonic
distortion plus noise
RL = 600 Ω,
f = 1 kHz
AV = 10 25°C0.025% 0.025%
THD + N
distortion plus noise
f = 1 kHz
AV = 100
25 C
0.12% 0.12%
Gain-bandwidth
product f = 10 kHz,
CL = 100 pF RL = 600 Ω,25°C 4.8 4.8 MHz
ts
Settling time
AV = −1,
Step = 0.85 V to
1.85 V,
0.1% 25°C 0.186 0.186
s
tsSettling time
1.85 V,
RL = 600 Ω,
C
L
= 100 pF 0.01% 25°C 3.92 3.92
µs
φmPhase margin at
unity gain
RL = 600
Ω
,
CL = 100 pF
25°C 46°46°
Gain margin
RL = 600 Ω,
CL = 100 pF
25°C 12 12 dB
†Full range is −40°C to 125°C for Q level part, −55°C to 125°C for M level part.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
16 WWW.TI.COM
electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA
†TLV2772Q
TLV2772M TLV2772AQ
TLV2772AM
UNIT
PARAMETER
TEST CONDITIONS
TA†
MIN TYP MAX MIN TYP MAX
UNIT
VIO
Input offset voltage
25°C 0.36 2.5 0.36 1.6
mV
VIO Input offset voltage Full range 0.4 2.7 0.4 1.9 mV
VIO
Temperature
coefficient of input
25°C
to
2
2
V/°C
αVIO
coefficient of input
offset voltage VDD = ±2.5 V,
VIC = 0,
VO = 0,
RS = 50 Ω
to
125°C2 2 µV/°C
IIO
Input offset current
DD
VIC = 0,
O
R
S
= 50
Ω25°C1 60 1 60
pA
IIO Input offset current Full range 2 125 2 125 pA
IIB
Input bias current
25°C 2 60 2 60
pA
IIB Input bias current Full range 6 350 6 350 pA
0
−0.3
0
−0.3
25
°
C
0
to
−0.3
to
0
to
−0.3
to
VICR
Common-mode
CMRR > 60 dB,
RS = 50 Ω
25 C
to
3.7
to
3.8
to
3.7
to
3.8
V
VICR
Common-mode
input voltage range CMRR > 60 dB, RS = 50 Ω
0
−0.3
0
−0.3
V
input voltage range
Full range
0
to
−0.3
to
0
to
−0.3
to
Full range
to
3.7
to
3.8
to
3.7
to
3.8
IOH = −1.3 mA
25°C 4.9 4.9
VOH
High-level output
IOH = −1.3 mA Full range 4.8 4.8
V
VOH
High-level output
voltage
IOH = −4.2 mA
25°C 4.7 4.7 V
voltage
IOH = −4.2 mA Full range 4.4 4.4
VIC = 2.5 V,
IOL = 1.3 mA
25°C 0.1 0.1
VOL
Low-level output
VIC = 2.5 V, IOL = 1.3 mA Full range 0.2 0.2
V
VOL
Low-level output
voltage
VIC = 2.5 V,
IOL = 4.2 mA
25°C 0.21 0.21 V
voltage
VIC = 2.5 V, IOL = 4.2 mA Full range 0.6 0.6
AVD
Large-signal
differential voltage
VIC = 2.5 V,
RL = 10 k
Ω
,
‡25°C 20 450 20 450
V/mV
AVD
differential voltage
amplification
VIC = 2.5 V,
VO = 1 V to 4 V
RL = 10 kΩ,‡
Full range 13 13 V/mV
ri(d) Differential input
resistance 25°C 1012 1012 Ω
ci(c) Common-mode
input capacitance f = 10 kHz, 25°C 8 8 pF
zoClosed-loop
output impedance f = 100 kHz, AV = 10 25°C 20 20 Ω
CMRR
Common-mode
VIC = VICR (min),
VO = 3.7 V,
25°C 60 96 60 96
dB
CMRR
Common-mode
rejection ratio
VIC = VICR (min),
RS = 50 Ω
VO = 3.7 V,
Full range 60 93 60 93 dB
kSVR
Supply voltage
rejection ratio
VDD = 2.7 V to 5 V,
VIC = VDD/2,
25°C 70 89 70 89
dB
kSVR
rejection ratio
(∆VDD /∆VIO)
VDD = 2.7 V to 5 V,
No load
VIC = VDD/2,
Full range 70 84 70 84 dB
IDD
Supply current
VO = 1.5 V,
No load
25°C 1 2 1 2
mA
I
DD
Supply current
(per channel)
V
O
= 1.5 V,
No load
Full range 2 2
mA
†Full range is −40°C to 125°C for Q level part, −55°C to 125°C for M level part.
‡Referenced to 2.5 V
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
17
WWW.TI.COM
operating characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA
†TLV2772Q
TLV2772M TLV2772AQ
TLV2772AM
UNIT
PARAMETER
TEST CONDITIONS
TA†
MIN TYP MAX MIN TYP MAX
UNIT
VO(PP) = 1.5 V,
CL = 100 pF,
25°C5 10.5 5 10.5
SR Slew rate at unity gain VO(PP) = 1.5 V
,
RL = 10 kΩCL = 100 pF
,
Full
range 4.7 6 4.7 6 V/µs
Vn
Equivalent input
f = 1 kHz 25°C 17 17
nV/√Hz
Vn
Equivalent input
noise voltage f = 10 kHz 25°C 12 12
nV/√Hz
VN(PP)
Peak-to-peak
equivalent input
f = 0.1 Hz to 1 Hz 25°C 0.33 0.33 µV
VN(PP)
equivalent input
noise voltage f = 0.1 Hz to 10 Hz 25°C 0.86 0.86 µV
InEquivalent input
noise current f = 100 Hz 25°C 0.6 0.6 fA/√Hz
Total harmonic
RL = 600 Ω,
AV = 1 0.005% 0.005%
THD + N Total harmonic
distortion plus noise
RL = 600 Ω,
f = 1 kHz
AV = 10 25°C0.016% 0.016%
THD + N
distortion plus noise
f = 1 kHz
AV = 100
25 C
0.095% 0.095%
Gain-bandwidth
product f = 10 kHz,
CL = 100 pF RL = 600 Ω,25°C 5.1 5.1 MHz
ts
Settling time
AV = −1,
Step = 1.5 V to
3.5 V,
0.1% 25°C 0.134 0.134
s
tsSettling time
3.5 V,
RL = 600 Ω,
C
L
= 100 pF 0.01% 25°C 1.97 1.97
µs
φmPhase margin at unity
gain
RL = 600
Ω
,
CL = 100 pF
25°C 46°46°
Gain margin
RL = 600 Ω,
CL = 100 pF
25°C 12 12 dB
†Full range is −40°C to 125°C for Q level part, −55°C to 125°C for M level part.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
18 WWW.TI.COM
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO
Input offset voltage
Distribution
vs Common-mode input voltage
1,2
3,4
VIO Input offset voltage
vs Common-mode input voltage
Distribution
3,4
5,6
IIB/IIO Input bias and input offset currents vs Free-air temperature 7
VOH High-level output voltage vs High-level output current 8,9
VOL Low-level output voltage vs Low-level output current 10,11
VO(PP) Maximum peak-to-peak output voltage vs Frequency 12,13
IOS Short-circuit output current vs Supply voltage
vs Free-air temperature 14
15
VOOutput voltage vs Differential input voltage 16
AVD Large-signal differential voltage amplification and phase margin vs Frequency 17,18
AVD Differential voltage amplification vs Load resistance
vs Free-air temperature 19
20,21
zoOutput impedance vs Frequency 22,23
CMRR Common-mode rejection ratio vs Frequency
vs Free-air temperature 24
25
kSVR Supply-voltage rejection ratio vs Frequency 26,27
IDD Supply current (per channel) vs Supply voltage 28
SR
Slew rate
vs Load capacitance
29
SR Slew rate
vs Load capacitance
vs Free-air temperature
29
30
VOVoltage-follower small-signal pulse response 31,32
VOVoltage-follower large-signal pulse response 33,34
VOInverting small-signal pulse response 35,36
VOInverting large-signal pulse response 37,38
VnEquivalent input noise voltage vs Frequency 39,40
Noise voltage (referred to input) Over a 10-second period 41
THD + N Total harmonic distortion plus noise vs Frequency 42,43
Gain-bandwidth product vs Supply voltage 44
B1Unity-gain bandwidth vs Load capacitance 45
φmPhase margin vs Load capacitance 46
Gain margin vs Load capacitance 47
Amplifier with shutdown pulse turnon/off characteristics 48 − 50
Supply current with shutdown pulse turnon/off characteristics 51 − 53
Shutdown supply current vs Free-air temperature 54
Shutdown forward/reverse isolation vs Frequency 55, 56
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
19
WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 1
−2.5
30
20
10
0−2 −1.5 −1 0 0.5
VIO − Input Offset Voltage − mV
−0.5
35
Percentage of Amplifiers − %
25
15
5
1
40 VDD = 2.7 V
RL = 10 kΩ
TA = 25°C
DISTRIBUTION OF TLV2772
INPUT OFFSET VOLTAGE
1.5 2.52
Figure 2
−2.5
30
20
10
0−2 −1.5 −1 0 0.5
VIO − Input Offset Voltage − mV
−0.5
35
Percentage of Amplifiers − %
25
15
5
1
40 VDD =5 V
RL = 10 kΩ
TA = 25°C
DISTRIBUTION OF TLV2772
INPUT OFFSET VOLTAGE
1.5 2.52
Figure 3
VDD = 2.7 V
TA = 25°C
INPUT OFFSET VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
2
1
0
−1
−2
1.5
0.5
−0.5
−1.5
−1 −0.5 0 0.5 2
VIC − Common-Mode Input Voltage − V
1.51 2.5 3
VIO − Input Offset Voltage − mV
Figure 4
INPUT OFFSET VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
1
0
−1
−2
−1 0 0.5
VIC − Common-Mode Input Voltage − V
−0.5
1.5
0.5
−0.5
−1.5
1
2
1.5 2.52 3 3.5 4.54
VDD = 5 V
TA = 25°C
VIO − Input Offset Voltage − mV
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
20 WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 5
αVIO − Temperature Coefficient − µV/°C
−6
30
20
10
0−3 0 3 9 126
35
Percentage of Amplifiers − %
25
15
5
VDD = 2.7 V
TA = 25°C to 125°C
DISTRIBUTION OF TLV2772
INPUT OFFSET VOLTAGE
Figure 6
−6
30
20
10
0−3 0 3 9 12
αVIO − Temperature Coefficient − µV/°C
6
35
Percentage of Amplifiers − %
25
15
5
VDD =5 V
TA = 25°C to 125°C
DISTRIBUTION OF TLV2772
INPUT OFFSET VOLTAGE
Figure 7
VDD = 5 V
VIC = 0
VO = 0
RS = 50 Ω
INPUT BIAS AND OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
0.20
0.10
0
0.15
0.05
−75 −50 −25 0 75
TA − Free-Air Temperature − °C
5025 100 125
IIB and I IO − Input Bias and Input Offset Currents − nA
IIB
IIO
Figure 8
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
3
2
1
0
2.5
1.5
0.5
0 5 10 15
IOH − High-Level Output Current − mA 2520
VOH− High-Level Output Voltage − V
VDD = 2.7 V
TA = 125°C
TA = −40°C
TA = 25°C
TA = 85°C
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
21
WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 9
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
3
2
1
001015
IOH − High-Level Output Current − mA
5
3.5
2.5
1.5
0.5
20
4
25 3530 40 45 5550
VDD = 5 V
TA = 25°C
VOH − High-Level Output Voltage − V
4.5
5
TA = −40°C
TA = 85°C
TA = 25°C
TA = 125°C
Figure 10
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
3
2
1
0
2.5
1.5
0.5
0 5 10 15
IOL − Low-Level Output Current − mA 3020
VOL − Low-Level Output Voltage − V
VDD = 2.7 V
TA = 125°C
25
TA = 85°C
TA = 25°C
TA = −40°C
Figure 11
2
1
0010
IOL − Low-Level Output Current − mA
2.5
1.5
0.5
20
3
30 40 50
VDD = 5 V
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
TA = 125°C
TA = 85°C
TA = −40°C
TA = 25°C
VOL − Low-Level Output Voltage − V
Figure 12
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
3
1
01000
f − Frequency − kHz
5
10000
100
4
RL = 10 kΩ
VO(PP) − Maximum Peak-to-Peak Output Voltage − V
2
VDD = 5 V
1% THD
VDD = 2.7 V
2% THD
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
22 WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 13
THD = 5%
RL = 600 Ω
TA = 25°C
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
3
2
1
0
2.5
1.5
0.5
100 f − Frequency − kHz
1000 1000
0
VDD = 5 V
VDD = 2.7 V
5
4
4.5
3.5
− Maximum Peak-to-Peak Output Voltage − V
VO(PP)
Figure 14
SHORT-CIRCUIT OUTPUT CURRENT
vs
SUPPLY VOLTAGE
30
0
−30
−60245
VDD − Supply Voltage − V
3
45
15
−15
−45
6
60
7
VO = VDD /2
VIC = VDD /2
TA = 25°C
IOS − Short-Circuit Output Current − mA
VID = −100 mV
VID = 100 mV
Figure 15
VDD = 5 V
VO = 2.5 V
SHORT-CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
60
20
−20
−60
40
0
−40
−75 −50 −25 0 75
TA − Free-Air Temperature − °C
5025 100 125
IOS − Short-Circuit Output Current − mA
VID = −100 mV
VID = 100 mV
Figure 16
RL = 600 Ω
TA = 25°C
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
4
2
0
5
3
1
−1000 −750 −500 −250 500
VID − Differential Input Voltage − µV
2500 750 1000
VO− Output Voltage − V
VDD = 2.7 V
VDD = 5 V
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
23
WWW.TI.COM
TYPICAL CHARACTERISTICS
100
60
20
−20
80
40
0
100 f − Frequency − Hz
10k 10M
AVD
Phase
LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION
AND PHASE MARGIN
vs
FREQUENCY
− Large-Signal Differential Amplification − dBAVD
m
φ− Phase Margin − degrees
300
180
60
−60
240
120
0
1k 100k 1M
−40 −90
VDD = 2.7 V
RL = 600 Ω
CL = 600 pF
TA = 25°C
Figure 17
300
180
60
−60
240
120
0
−90
100
60
20
−20
80
40
0
−40
100 f − Frequency − Hz
10k 10M
AVD
Phase
VDD = 5 V
RL = 600 Ω
CL = 600 pF
TA = 25°C
LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION
AND PHASE MARGIN
vs
FREQUENCY
− Large-Signal Differential Amplification − dBAVD
m
φ− Phase Margin − degrees
1k 100k 1M
Figure 18
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
24 WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 19
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
LOAD RESISTANCE
200
100
010
RL − Load Resistance − kΩ
250
150
50
1 100 10000.1
TA = 25°C
− Differential Voltage Amplification − V/mVAVD
VDD = 2.7 V
VDD = 5 V
Figure 20
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
1000
10
0.1
100
1
− Differential Voltage Amplification − V/mVAVD
TA − Free-Air Temperature − °C
−75 −50 −25 0 755025 100 125
VDD = 2.7 V
VIC = 1.35 V
VO = 0.6 V to 2.1 V
RL = 1 MΩ
RL = 600 Ω
RL = 10 kΩ
Figure 21
−50
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
1000
10
0.1
100
1
− Differential Voltage Amplification − V/mVAVD
TA − Free-Air Temperature − °C
VDD = 5 V
VIC = 2.5 V
VO = 1 V to 4 V
RL = 1 MΩ
RL = 600 Ω
−75 −25 0 755025 100 125
RL = 10 kΩ
Figure 22
OUTPUT IMPEDANCE
vs
FREQUENCY
100
1
0.01
10
0.10
100 1k 10k 100k
f − Frequency − Hz 1M
ZO− Output Impedance −
AV = 100
AV = 10
AV = 1
VDD = 2.7 V
TA = 25°C
Ω
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
25
WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 23
OUTPUT IMPEDANCE
vs
FREQUENCY
100
1
0.01
10
0.1
f − Frequency − Hz
100 1k 10k 100k 1M
VDD = ±2.5 V
TA = 25°C
Av = 100
− Output Impedance −ZoΩ
Av = 10
Av = 1
Figure 24
VIC = 1.35 V
and 2.5 V
TA = 25°C
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
90
80
60
40
70
50
10 100 1k
f − Frequency − Hz
10k 100k 10M
VDD = 5 V
VDD = 2.7 V
CMRR − Common-Mode Rejection Ratio − dB
1M
Figure 25
−20−40 0 20 806040 100 120
COMMON-MODE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
110
100
90
80
105
95
85
TA − Free-Air Temperature − °C
CMRR − Common-Mode Rejection Ratio − dB
120
115
VDD = 5 V
VDD = 2.7 V
140
Figure 26
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
120
60
0
10 100 1k 10k
f − Frequency − Hz 10M
kSVR− Supply-Voltage Rejection Ratio − dB
kSVR−
VDD = 2.7 V
TA = 25°C
100k 1M
kSVR+
100
40
80
20
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
26 WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 27
SUPPLY VOLTAGE REJECTION RATIO
vs
FREQUENCY
120
80
40
0
100
60
20
10 100 1 k 10 k 10 M
f − Frequency − Hz 1 M100 k
kSVR − Supply Voltage Rejection Ratio − dB
kSVR+
kSVR−
VDD = 5 V
TA = 25°C
Figure 28
SUPPLY CURRENT (PER CHANNEL)
vs
SUPPLY VOLTAGE
1.2
0.8
0.4
0
1
0.6
0.2
2.5 3 3.5 4
VDD − Supply Voltage − V 74.5
IDD − Supply Current (Per Channel) − mA
TA = 0°C
1.6
1.4
5 5.5 6 6.5
TA = 125°C
TA = 85°C
TA = 25°C
TA = −40°C
Figure 29
SLEW RATE
vs
LOAD CAPACITANCE
1k
CL − Load Capacitance − pF
100 10k 100k10
VDD = 5 V
AV = −1
TA = 25°C
SR+
12
8
4
0
10
6
2
16
14
SR − Slew Rate − V/µs
SR−
Figure 30
−50−75 −25 0 755025 100 125
SLEW RATE
vs
FREE-AIR TEMPERATURE
14
12
10
8
13
11
9
TA − Free-Air Temperature − °C
VDD = 2.7 V
RL = 10 kΩ
CL = 100 pF
AV = 1
SR − Slew Rate − µs
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
27
WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 31
t − Time − µs
VOLTAGE-FOLLOWER
SMALL-SIGNAL PULSE RESPONSE
VDD = 2.7 V
RL = 600 Ω
CL = 100 pF
AV = 1
TA = 25°C
40
0
20
−20
VO− Output Voltage − mV
80
60
0 1.510.5 2 2.5 3.53 4 4.5 5
100
−40
−60
Figure 32
t − Time − µs
VDD = 5 V
RL = 600 Ω
CL = 100 pF
AV = 1
TA = 25°C
VOLTAGE-FOLLOWER
SMALL-SIGNAL PULSE RESPONSE
40
0
20
−20
VO− Output Voltage − mV
80
60
0 1.510.5 2 2.5 3.53 4 4.5 5
100
−40
−60
Figure 33
t − Time − µs
VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
VDD = 2.7 V
RL = 600 Ω
CL = 100 pF
AV = 1
TA = 25°C
1.5
0.5
1
0
VO− Output Voltage − V
2.5
2
0 1.510.5 2 2.5 3.53 4 4.5 5
3
−0.5
−1
Figure 34
t − Time − µs
VDD = 5 V
RL = 600 Ω
CL = 100 pF
AV = 1
TA = 25°C
VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
3
1
2
0
VO− Output Voltage − V
5
4
0 1.510.5 2 2.5 3.53 4 4.5 5
6
−1
−2
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
28 WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 35
t − Time − µs
VDD = 2.7 V
RL = 600 Ω
CL = 100 pF
AV = −1
TA = 25°C
INVERTING SMALL-SIGNAL
PULSE RESPONSE
40
0
20
−20
VO− Output Voltage − mV
80
60
0 1.510.5 2 2.5 3.53 4 4.5 5
100
−40
−60
Figure 36
t − Time − µs
VDD = 5 V
RL = 600 Ω
CL = 100 pF
AV = −1
TA = 25°C
INVERTING SMALL-SIGNAL
PULSE RESPONSE
40
0
20
−20
VO− Output Voltage − mV
80
60
0 1.510.5 2 2.5 3.53 4 4.5 5
100
−40
−60
Figure 37
t − Time − µs
VDD = 2.7 V
RL = 600 Ω
CL = 100 pF
AV = −1
TA = 25°C
INVERTING LARGE-SIGNAL
PULSE RESPONSE
1.5
0.5
1
0
VO− Output Voltage − V
2.5
2
0 1.510.5 2 2.5 3.53 4 4.5 5
3
−0.5
−1
Figure 38
t − Time − µs
VDD = 5 V
RL = 600 Ω
CL = 100 pF
AV = −1
TA = 25°C
INVERTING LARGE-SIGNAL
PULSE RESPONSE
2.5
1.5
2
1
VO− Output Voltage − V
3.5
3
0 1.510.5 2 2.5 3.53 4 4.5 5
4
0.5
1
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
29
WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 39
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
120
80
40
0100 10k
f − Frequency − Hz
140
100
60
20
1k
160
10
VDD = 2.7 V
RS = 20 Ω
TA = 25°C
− Input Noise Voltage −VnnV/ Hz
Figure 40
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
100
f − Frequency − Hz
1k 10k10
VDD = 5 V
RS = 20 Ω
TA = 25°C
120
80
40
0
100
60
20
140
− Input Noise Voltage −nV Hz
Vn
t − Time − s
VDD = 5 V
f = 0.1 Hz to 10 Hz
TA = 25°C
NOISE VOLTAGE
OVER A 10 SECOND PERIOD
012345678910
Noise Voltage − nV
300
100
−100
−300
200
GND
−200
Figure 41
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
30 WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 42
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
10
0.1
0.001
1
0.01
f − Frequency − Hz
10 100 1k 10k 100k
VDD = 2.7 V
RL = 600 Ω
TA = 25°C
THD+N − Total Harmonic Distortion Plus Noise − %
Av = 100
Av = 10
Av = 1
Figure 43
10
0.1
0.001
1
0.01
f − Frequency − Hz
10 100 1k 10k 100k
VDD = 5 V
RL = 600 Ω
TA = 25°C
THD+N − Total Harmonic Distortion Plus Noise − %
Av = 100
Av = 10
Av = 1
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
Figure 44
GAIN-BANDWIDTH PRODUCT
vs
SUPPLY VOLTAGE
5.2
4.8
4.4
4
5
4.6
4.2
2 2.5 3 3.5 5
VDD − Supply Voltage − V
4.54 5.5 6
Gain-Bandwidth Product − MHz
RL = 600 Ω
CL = 100 pF
f = 10 kHz
TA = 25°C
Figure 45
UNITY-GAIN BANDWIDTH
vs
LOAD CAPACITANCE
4
2
01k
CL − Load Capacitance − pF
5
3
1
100 10k 100k10
Unity-Gain Bandwidth − MHz
Rnull = 0
Rnull = 20
Rnull = 50
Rnull = 100
VDD = 5 V
RL = 600 Ω
TA = 25°C
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
31
WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 46
60
40
20
0
50
30
10
10 CL − Load Capacitance − pF
1k
VDD = 5 V
RL = 600 Ω
TA = 25°C
m
φ− Phase Margin − degrees
100 10k 100K
PHASE MARGIN
vs
LOAD CAPACITANCE
90
70
80
Rnull = 0
Rnull = 20 Ω
Rnull = 50 Ω
Rnull = 100 Ω
Figure 47
15
25
35
40
20
30
10 CL − Load Capacitance − pF
1k
VDD = 5 V
RL = 600 Ω
TA = 25°C
Gain Margin − dB
100 10k 100K
GAIN MARGIN
vs
LOAD CAPACITANCE
0
10
5
Rnull = 0
Rnull = 20 Ω
Rnull = 50 Ω
Rnull = 100 Ω
Figure 48
VDD = 5 V
AV = 5
TA = 25°C
TLV2770
AMPLIFIER WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
6
0
−4
−8
−12
2
−2
−6
−10
−4 −2 0 2 8
t − Time − µs
641014
Shutdown Signal − V
12
− Output Voltage − V
VO
8
6
5
4
3
2
1
0
−1
47
SHDN = VDD
SHDN = GND
VO
Figure 49
TLV2773
AMPLIFIER WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
8
2
−2
−6
−10
4
0
−4
−8
−2.5 0 2.5 7.5
t − Time − µs
510 15
Shutdown Signal − V
12.5
− Output Voltage − V
VO
8
6
5
4
3
2
1
0
−1
67
SHDN = VDD
VO
Channel 1
VDD = 5 V
AV = 5
TA = 25°C
Channel 1 Switched
Channel 2 SHDN MODE
SHDN = GND
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
32 WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 50
TLV2775 − CHANNEL 1
AMPLIFIER WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
8
2
−2
−6
−10
4
0
−4
−8
−2.5 0 2.5 7.5
t − Time − µs
510 15
Shutdown Signal − V
12.5
− Output Voltage − V
VO
8
6
5
4
3
2
1
0
−1
67
SHDN = VDD
VO
Channel 1
VDD = 5 V
AV = 5
TA = 25°C
Channel 1/2 Switched
Channel 3/4 SHDN MODE
SHDN = GND
TLV2770
SUPPLY CURRENT WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
6
0
−4
−8
−12
2
−2
−6
−10
−4 −2 0 4
t − Time − µs
26 14
Shutdown Signal − V
8
24
18
15
12
9
6
3
0
−3
421
Figure 51
IDD − Supply Current − mA
10 12
VDD = 5 V
AV = 5
TA = 25°C
SHDN = GND
SHDN = VDD
IDD
Figure 52
TLV2773
SUPPLY CURRENT WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
6
−3
−9
−18
0
−6
−12
−15
−5 −2.5 0 5
t − Time − µs
2.5 7.5 15
Shutdown Signal − V
10
70
50
40
30
20
10
0
−3
360
IDD − Supply Current − mA
12.5
VDD = 5 V
AV = 5
TA = 25°C
Channel 1 Switched
Channel 2 SHDN MODE
SHDN = GND
SHDN = VDD
IDD
Figure 53
TLV2775
SUPPLY CURRENT WITH SHUTDOWN PULSE
TURNON/OFF CHARACTERISTICS
6
−3
−9
−18
0
−6
−12
−15
−5 −2.5 0 5
t − Time − µs
2.5 7.5 15
Shutdown Signal − V
10
70
50
40
30
20
10
0
−3
360
IDD − Supply Current − mA
12.5
VDD = 5 V
AV = 5
TA = 25°C
Channel 1/2 Switched
Channel 3/4 SHDN MODE
SHDN = GND
SHDN = VDD
IDD
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
33
WWW.TI.COM
TYPICAL CHARACTERISTICS
Figure 54
7
4
2
0
5
3
1
−75 −50 −25 25
TA − Free-Air Temperature − °C
0 50 125
75
6
100
AV = 5
RL = OPEN
SHDN = GND
VDD 5 V
SHUTDOWN SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
VDD 2.7 V
DD
I Shutdown Supply Current − −Aµ
Figure 55
TLV2770
SHUTDOWN FORWARD ISOLATION
vs
FREQUENCY
140
20
−20
40
0
f − Frequency − Hz
10 102103104106
Shutdown Forward Isolation − dB
SHDN MODE
AV = 1
VDD = 2.7 V
RL = 10 kΩ
CL = 20 pF
TA = 25°C
VI(PP) = 2.7 V
105
100
120
80
60
VI(PP) = 0.1 V
Figure 56
TLV2770
SHUTDOWN REVERSE ISOLATION
vs
FREQUENCY
140
20
−20
40
0
f − Frequency − Hz
10 102103104106
Shutdown Reverse Isolation − dB
SHDN MODE
AV = 1
VDD = 2.7 V
RL = 10 kΩ
CL = 20 pF
TA = 25°C
VI(PP) = 2.7 V
105
100
120
80
60 VI(PP) = 0.1 V
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
34 WWW.TI.COM
PARAMETER MEASUREMENT INFORMATION
_
+
Rnull
RLCL
Figure 57
driving a capacitive load
When the amplifier is configured in this manner, capacitive loading directly on the output will decrease the
device’s phase margin leading to high frequency ringing or oscillations. Therefore, for capacitive loads of greater
than 10 pF, it is recommended that a resistor be placed in series (RNULL) with the output of the amplifier, as
shown in Figure 58. A minimum value of 20 Ω should work well for most applications.
CLOAD
RF
Input Output
RGRNULL
_
+
Figure 58. Driving a Capacitive Load
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
35
WWW.TI.COM
APPLICATION INFORMATION
offset voltage
The output offset voltage, (VOO) is the sum of the input of fset voltage (VIO) and both input bias currents (IIB) times
the corresponding gains. The following schematic and formula can be used to calculate the output offset
voltage:
VOO +VIOǒ1)ǒRF
RGǓǓ"IIB)RSǒ1)ǒRF
RGǓǓ"IIB– RF
+
−
VI+
RG
RS
RF
IIB−
VO
IIB+
Figure 59. Output Offset Voltage Model
general configurations
When receiving low-level signals, limiting the bandwidth of the incoming signals into the system is often
required. The simplest way to accomplish this is to place an RC filter at the noninverting terminal of the amplifier
(see Figure 60).
VIVO
C1
+
−
RGRF
R1
f–3dB +1
2pR1C1
VO
VI+ǒ1)RF
RGǓǒ1
1)sR1C1Ǔ
Figure 60. Single-Pole Low-Pass Filter
If even more attenuation is needed, a multiple pole filter is required. The Sallen-Key filter can be used for this
task. For best results, the amplifier should have a bandwidth that is 8 to 10 times the filter frequency bandwidth.
Failure to do this can result in phase shift of the amplifier.
VI
C2
R2R1
C1
RF
RG
R1 = R2 = R
C1 = C2 = C
Q = Peaking Factor
(Butterworth Q = 0.707)
(
=1
Q
2 − )
RGRF
_
+f–3dB +1
2pRC
Figure 61. 2-Pole Low-Pass Sallen-Key Filter
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
36 WWW.TI.COM
APPLICATION INFORMATION
using the TLV2772 as an accelerometer interface
The schematic, shown in Figure 62, shows the ACH04-08-05 interfaced to the TLV1544 10-bit analog-to-digital
converter (ADC).
The ACH04-08-05 is a shock sensor designed to convert mechanical acceleration into electrical signals. The
sensor contains three piezoelectric sensing elements oriented to simultaneously measure acceleration in three
orthogonal, linear axes (x, y, z). The operating frequency is 0.5 Hz to 5 kHz. The output is buffered with an
internal JFET and has a typical output voltage of 1.80 mV/g for the x and y axis and 1.35 mV/g for the z axis.
Amplification and frequency shaping of the shock sensor output is done by the TLV2772 rail-to-rail operational
amplifier. The TLV2772 is ideal for this application as it offers high input impedance, good slew rate, and
excellent dc precision. The rail-to-rail output swing and high output drive are perfect for driving the analog input
of the TLV1544 ADC.
_
+
1 Axis ACH04−08−05
Shock Sensor
3 V
1.23 V
R1
100 kΩ
C1
0.22 µF
R2
1 MΩ
R3
10 kΩ
1.23 V C2
2.2 nF
R4
100 kΩ
3 V R5
1 kΩ
C3
0.22 µF
1/2
TLV2772
Signal Conditioning
Output to
TLV1544 (ADC)
R6
2.2 kΩ
1.23 V
3 V
TLV431
C
RA
4
81
2
3
Voltage Reference
Figure 62. Accelerometer Interface Schematic
The sensor signal must be amplified and frequency-shaped to provide a signal the ADC can properly convert
into the digital domain. Figure 62 shows the topology used in this application for one axis of the sensor. This
system is powered from a single 3-V supply. Configuring the TLV431 with a 2.2-kΩ resistor produces a reference
voltage of 1.23 V. This voltage is used to bias the operational amplifier and the internal JFETs in the shock
sensor.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
37
WWW.TI.COM
APPLICATION INFORMATION
gain calculation
Since the TLV2772 is capable of rail-to-rail output using a 3-V supply, VO = 0 (min) to 3 V (max). With no signal
from the sensor, nominal VO = reference voltage = 1.23 V. Therefore, the maximum negative swing from nominal
is 0 V − 1.23 V = −1.23 V and the maximum positive swing is 3 V − 1.23 V = 1.77 V. By modeling the shock sensor
as a low impedance voltage source with output of 2.25 mV/g (max) in the x and y axis and 1.70 mV/g (max) in
the z axis, the gain of the circuit is calculated by equation 1.
Gain +Output Swing
Sensor Signal Acceleration (1)
To avoid saturation of the operational amplifier , the gain calculations are based on the maximum negative swing
of −1.23 V and the maximum sensor output of 2.25 mV/g (x and y axis) and 1.70 mV/g (z axis).
Gain (x, y) +*1.23 V
2.25 mVńg *50 g +10.9 (2)
Gain (z) +–1.23 V
1.70 mVńg –50 g +14.5 (3)
and
By selecting R3 = 10 kΩ and R4 = 100 kΩ, in the x and y channels, a gain of 11 is realized. By selecting
R3 = 7.5 kΩ and R4 = 100 kΩ, in the z channel, a gain of 14.3 is realized. The schematic shows the configuration
for either the x- or y-axis.
bandwidth calculation
To calculate the component values for the frequency shaping characteristics of the signal conditioning circuit,
1 Hz and 500 Hz are selected as the minimum required 3-dB bandwidth.
To minimize the value of the input capacitor (C1) required to set the lower cutoff frequency requires a large value
resistor for R2 is required. A 1-M Ω resistor is used in this example. To set the lower cutoff frequency, the required
capacitor value for C1 is:
C1 +1
2pfLOW R2+0.159 µF(4)
Using a value of 0.22 µF, a more common value of capacitor, the lower cutoff frequency is 0.724 Hz.
To minimize the phase shift in the feedback loop caused by the input capacitance of the TLV2772, it is best to
minimize the value of the feedback resistor R4. However, to reduce the required capacitance in the feedback
loop a large value for R4 is required. Therefore, a compromise for the value of R4 must be made. In this circuit,
a value of 100 kΩ has been selected. To set the upper cutoff frequency, the required capacitor value for C2 is:
C2 +1
2pfHIGH R4+3.18 µF(5)
Using a 2.2-nF capacitor, the upper cutoff frequency is 724 Hz.
R5 and C3 also cause the signal response to roll off. Therefore, it is beneficial to design this roll-off point to begin
at the upper cutoff frequency. Assuming a value of 1 kΩ for R5, the value for C3 is calculated to be
0.22 µF.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
38 WWW.TI.COM
APPLICATION INFORMATION
circuit layout considerations
To achieve the levels of high performance o f the TLV277x, follow proper printed-circuit board design techniques.
A general set of guidelines is given in the following.
DGround planes—It is highly recommended that a ground plane be used on the board to provide all
components with a low inductive ground connection. However, in the areas of the amplifier inputs and
output, the ground plane can be removed to minimize the stray capacitance.
DProper power supply decoupling—Use a 6.8-µF tantalum capacitor in parallel with a 0.1-µF ceramic
capacitor on each supply terminal. It may be possible to share the tantalum among several amplifiers
depending on the application, but a 0.1-µF ceramic capacitor should always be used on the supply terminal
of every amplifier. In addition, the 0.1-µF capacitor should be placed as close as possible to the supply
terminal. As this distance increases, the inductance in the connecting trace makes the capacitor less
effective. The designer should strive for distances of less than 0.1 inches between the device power
terminals and the ceramic capacitors.
DSockets—Sockets can be used but are not recommended. The additional lead inductance in the socket pins
will often lead to stability problems. Surface-mount packages soldered directly to the printed-circuit board
is the best implementation.
DShort trace runs/compact part placements—Optimum high performance is achieved when stray series
inductance has been minimized. To realize this, the circuit layout should be made as compact as possible,
thereby minimizing the length of all trace runs. Particular attention should be paid to the inverting input of
the amplifier. Its length should be kept as short as possible. This will help to minimize stray capacitance at
the input of the amplifier.
DSurface-mount passive components—Using surface-mount passive components is recommended for high
performance amplifier circuits for several reasons. First, because of the extremely low lead inductance of
surface-mount components, the problem with stray series inductance is greatly reduced. Second, the small
size of surface-mount components naturally leads to a more compact layout thereby minimizing both stray
inductance and capacitance. If leaded components are used, it is recommended that the lead lengths be
kept as short as possible.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
39
WWW.TI.COM
APPLICATION INFORMATION
general power dissipation considerations
For a given θJA, the maximum power dissipation is shown in Figure 63 and is calculated by the following formula:
PD+ǒTMAX–TA
qJA Ǔ
Where: PD= Maximum power dissipation of TLV277x IC (watts)
TMAX= Absolute maximum junction temperature (150°C)
TA= Free-ambient air temperature (°C)
θJA = θJC + θCA
θJC = Thermal coefficient from junction to case
θCA = Thermal coefficient from case to ambient air (°C/W)
1
0.75
0.5
0
−55−40 −25 −10 5
Maximum Power Dissipation − W
1.25
1.5
MAXIMUM POWER DISSIPATION
vs
FREE-AIR TEMPERATURE
1.75
20 35 50
0.25
TA − Free-Air Temperature − °C
2
65 80 95 110 125
MSOP Package
Low-K Test PCB
θJA = 260°C/W
TJ = 150°C
PDIP Package
Low-K Test PCB
θJA = 104°C/W
SOIC Package
Low-K Test PCB
θJA = 176°C/W
SOT-23 Package
Low-K Test PCB
θJA = 324°C/W
NOTE A: Results are with no air flow and using JEDEC Standard Low-K test PCB.
Figure 63. Maximum Power Dissipation vs Free-Air Temperature
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
40 WWW.TI.COM
APPLICATION INFORMATION
shutdown function
Three members of the TLV277x family (TLV2770/3/5) have a shutdown terminal for conserving battery life in
portable applications. When the shutdown terminal is tied low, the supply current is reduced to 0.8 µA/channel,
the amplifier is disabled, and the outputs are placed in a high impedance mode. To enable the amplifier, the
shutdown terminal can either be left floating or pulled high. When the shutdown terminal is left floating, care
needs to b e taken to ensure that parasitic leakage current at the shutdown terminal does not inadvertently place
the operational amplifier into shutdown. The shutdown terminal threshold is always referenced to VDD/2.
Therefore, when operating the device with split supply voltages (e.g. ±2.5 V), the shutdown terminal needs to
be pulled to VDD− (not GND) to disable the operational amplifier.
The amplifier’s output with a shutdown pulse is shown in Figures 48, 49, and 50. The amplifier is powered with
a single 5-V supply and configured as a noninverting configuration with a gain of 5. The amplifier turnon and
turnoff times are measured from the 50% point of the shutdown pulse to the 50% point of the output waveform.
The times for the single, dual, and quad are listed in the data tables. The bump on the rising edge of the TLV2770
output waveform is due to the start-up circuit on the bias generator. For the dual and quad (TLV2773/5), this
bump is attributed to the bias generator’s start-up circuit as well as the crosstalk between the other channel(s),
which are in shutdown.
Figures 55 and 56 show the amplifier’s forward and reverse isolation in shutdown. The operational amplifier is
powered b y ±1.35-V su p p l i e s a nd c o n f i g u r e d a s a v o l t a g e f o llower (AV = 1). The isolation performance is plotted
across frequency for both 0.1 VPP and 2.7 VPP input signals. During normal operation, the amplifier would not
be able to handle a 2.7-VPP input signal with a supply voltage of ±1.35 V since it exceeds the common-mode
input voltage range (VICR). However, this curve illustrates that the amplifier remains in shutdown even under
a worst case scenario.
SLOS209G − JANUAR Y 1998 − REVISED FEBRUARY 2004
41
WWW.TI.COM
APPLICATION INFORMATION
macromodel information
Macromodel information provided was derived using Microsim Parts Release 8, the model generation
software used with Microsim PSpice. The Boyle macromodel (see Note 4) and subcircuit in Figure 64 are
generated using the TLV2772 typical electrical and operating characteristics at TA = 25°C. Using this
information, output simulations of the following key parameters can be generated to a tolerance of 20% (in most
cases):
DMaximum positive output voltage swing
DMaximum negative output voltage swing
DSlew rate
DQuiescent power dissipation
DInput bias current
DOpen-loop voltage amplification
DUnity-gain frequency
DCommon-mode rejection ratio
DPhase margin
DDC output resistance
DAC output resistance
DShort-circuit output current limit
NOTE 4: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, “Macromodeling of Integrated Circuit Operational Amplifiers”, IEEE Journal
of Solid-State Circuits, SC-9, 353 (1974).
OUT
+
−
+
−
+
−
+
−+
−
+
−+
−
+−
VDD+
rp
IN− 2
IN+ 1
GND
rd1
11
j1 j2
10
rss iss
3
12
rd2
ve
54 de
dp
vc
dc
4
C1
53
r2 6
9
egnd
vb
fb
C2
gcm ga vlim
8
5ro1
ro2
hlim
90 dlp
91
dln
92
vlnvlp
99
7
css
* TLV2772 operational amplifier macromodel subcircuit
* created using Parts release 8.0 on 12/12/97 at 10:08
* Parts is a MicroSim product.
*
* connections: noninverting input
* | inverting input
* | | positive power supply
* | | | negative power supply
* | | | | output
* | | | | |
.subckt TLV2772 1 2 3 4 5
*c1 11 12 2.8868E-12
c2 6 7 10.000E−12
css 10 99 2.6302E−12
dc 5 53 dy
de 54 5 dy
dlp 90 91 dx
dln 92 90 dx
dp 4 3 dx
egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5
fb 7 99 poly(5) vb vc ve vlp vln 0
15.513E6 −1E3 1E3 16E6 −16E6
ga 6 0 11 12 188.50E−6
gcm 0 6 10 99 9.4472E−9
iss 3 10 dc 145.50E−6
hlim 90 0 vlim 1K
j1 11 2 10 jx1
j2 12 1 10 jx2
r2 6 9 100.00E3
rd1 4 11 5.3052E3
rd2 4 12 5.3052E3
ro1 8 5 17.140
ro2 7 99 17.140
rp 3 4 4.5455E3
rss 10 99 1.3746E6
vb 9 0 dc 0
vc 3 53 dc .82001
ve 54 4 dc .82001
vlim 7 8 dc 0
vlp 91 0 dc 47
vln 0 92 dc 47
.model dx D(Is=800.00E−18)
.model dy D(Is=800.00E−18 Rs=1m Cjo=10p)
.model jx1 PJF(Is=2.2500E−12 Beta=244.20E−6
+ Vto=−.99765)
.model jx2 PJF(Is=1.7500E−12 Beta=244.20E−6
+ Vto=−1.002350)
.ends
*$
Figure 64. Boyle Macromodel and Subcircuit
PSpice and Parts are trademarks of MicroSim Corporation.
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
5962-9858801Q2A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
5962-9858801QHA ACTIVE CFP U 10 1 TBD Call TI Call TI
5962-9858801QPA ACTIVE CDIP JG 8 1 TBD Call TI Call TI
5962-9858802Q2A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
5962-9858802QHA ACTIVE CFP U 10 1 TBD Call TI Call TI
5962-9858802QPA ACTIVE CDIP JG 8 1 TBD Call TI Call TI
TLV2770AID ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2770AIDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2770AIP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2770AIPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2770CD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2770CDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2770CDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2770CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2770CP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2770CPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2770IDGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2770IDGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2770IDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2770IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2770IP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2770IPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TLV2771AIDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771AIDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771CD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771CDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771CDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771CDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771CDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771CDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771CDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771ID ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771IDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771IDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771IDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771IDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771IDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771IDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2771IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 3
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TLV2772AID ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AIDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AIDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AIDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AIP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2772AIPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2772AMD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AMDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AMDR ACTIVE SOIC D 8 TBD Call TI Call TI
TLV2772AMDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AMFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
TLV2772AMJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
TLV2772AMUB ACTIVE CFP U 10 1 TBD A42 N / A for Pkg Type
TLV2772AQD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AQDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AQDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AQDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AQPW ACTIVE TSSOP PW 8 150 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AQPWG4 ACTIVE TSSOP PW 8 150 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772AQPWR ACTIVE TSSOP PW 8 TBD Call TI Call TI
TLV2772AQPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 4
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TLV2772CD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772CDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772CDGK ACTIVE VSSOP DGK 8 80 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772CDGKG4 ACTIVE VSSOP DGK 8 80 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772CDGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772CDGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772CDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772CP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2772CPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2772ID ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772IDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772IDGK ACTIVE VSSOP DGK 8 80 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772IDGKG4 ACTIVE VSSOP DGK 8 80 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772IDGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772IDGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772IDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772IP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 5
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TLV2772IPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2772MD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772MDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772MDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772MDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772MFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
TLV2772MJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
TLV2772MUB ACTIVE CFP U 10 1 TBD A42 N / A for Pkg Type
TLV2772QD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772QDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772QDR ACTIVE SOIC D 8 1500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772QDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772QPW ACTIVE TSSOP PW 8 150 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772QPWG4 ACTIVE TSSOP PW 8 150 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772QPWR ACTIVE TSSOP PW 8 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2772QPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2773AIN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2773AINE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2773CDGS ACTIVE MSOP DGS 10 80 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2773CDGSG4 ACTIVE MSOP DGS 10 80 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2773CDGSR ACTIVE MSOP DGS 10 TBD Call TI Call TI
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 6
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TLV2773CDGSRG4 ACTIVE MSOP DGS 10 TBD Call TI Call TI
TLV2773CDR ACTIVE SOIC D 14 TBD Call TI Call TI
TLV2773CDRG4 ACTIVE SOIC D 14 TBD Call TI Call TI
TLV2773IDGSR ACTIVE MSOP DGS 10 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2773IDGSRG4 ACTIVE MSOP DGS 10 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2773IDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2773IDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2773IN ACTIVE PDIP N 14 TBD Call TI Call TI
TLV2773INE4 ACTIVE PDIP N 14 TBD Call TI Call TI
TLV2774AID ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774AIDG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774AIDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774AIDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774AIN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2774AINE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2774AIPW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774AIPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774CD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774CDG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774CDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774CDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 7
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TLV2774CN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2774CNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2774CPW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774CPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774CPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774CPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774ID ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774IDG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774IDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774IDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774IN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2774INE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2774IPW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774IPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774IPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2774IPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2775AIN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2775AINE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2775AIPW ACTIVE TSSOP PW 16 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2775AIPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2775CD ACTIVE SOIC D 16 TBD Call TI Call TI
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 8
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TLV2775CDG4 ACTIVE SOIC D 16 TBD Call TI Call TI
TLV2775CN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2775CNE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2775ID ACTIVE SOIC D 16 40 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2775IDG4 ACTIVE SOIC D 16 40 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2775IDR ACTIVE SOIC D 16 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2775IDRG4 ACTIVE SOIC D 16 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2775IN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2775INE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLV2775IPWR ACTIVE TSSOP PW 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLV2775IPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 9
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TLV2771, TLV2772, TLV2772A, TLV2772AM, TLV2772M, TLV2774, TLV2774A :
•Catalog: TLV2772A, TLV2772
•Automotive: TLV2771-Q1, TLV2772-Q1, TLV2772A-Q1, TLV2772A-Q1, TLV2772-Q1
•Enhanced Product: TLV2772A-EP, TLV2772A-EP, TLV2774-EP, TLV2774A-EP
•Military: TLV2772M, TLV2772AM
NOTE: Qualified Version Definitions:
•Catalog - TI's standard catalog product
•Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
•Enhanced Product - Supports Defense, Aerospace and Medical Applications
•Military - QML certified for Military and Defense Applications
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
TLV2770CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TLV2770IDGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
TLV2770IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TLV2771AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TLV2771CDBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3
TLV2771CDBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3
TLV2771CDBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3
TLV2771CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TLV2771IDBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3
TLV2771IDBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3
TLV2771IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TLV2772AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TLV2772CDGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
TLV2772CDGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
TLV2772CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TLV2772IDGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
TLV2772IDGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
TLV2772IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 17-Aug-2012
Pack Materials-Page 1
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
TLV2772MDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TLV2772QPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1
TLV2773IDGSR MSOP DGS 10 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
TLV2773IDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
TLV2774AIDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
TLV2774CDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
TLV2774CPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
TLV2774IDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
TLV2774IPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
TLV2775IDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1
TLV2775IPWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
TLV2770CDR SOIC D 8 2500 340.5 338.1 20.6
TLV2770IDGKR VSSOP DGK 8 2500 358.0 335.0 35.0
TLV2770IDR SOIC D 8 2500 340.5 338.1 20.6
TLV2771AIDR SOIC D 8 2500 340.5 338.1 20.6
TLV2771CDBVR SOT-23 DBV 5 3000 182.0 182.0 20.0
TLV2771CDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0
PACKAGE MATERIALS INFORMATION
www.ti.com 17-Aug-2012
Pack Materials-Page 2
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
TLV2771CDBVT SOT-23 DBV 5 250 180.0 180.0 18.0
TLV2771CDR SOIC D 8 2500 340.5 338.1 20.6
TLV2771IDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0
TLV2771IDBVT SOT-23 DBV 5 250 180.0 180.0 18.0
TLV2771IDR SOIC D 8 2500 340.5 338.1 20.6
TLV2772AIDR SOIC D 8 2500 340.5 338.1 20.6
TLV2772CDGKR VSSOP DGK 8 2500 364.0 364.0 27.0
TLV2772CDGKR VSSOP DGK 8 2500 358.0 335.0 35.0
TLV2772CDR SOIC D 8 2500 340.5 338.1 20.6
TLV2772IDGKR VSSOP DGK 8 2500 364.0 364.0 27.0
TLV2772IDGKR VSSOP DGK 8 2500 358.0 335.0 35.0
TLV2772IDR SOIC D 8 2500 340.5 338.1 20.6
TLV2772MDR SOIC D 8 2500 367.0 367.0 35.0
TLV2772QPWR TSSOP PW 8 2000 367.0 367.0 35.0
TLV2773IDGSR MSOP DGS 10 2500 358.0 335.0 35.0
TLV2773IDR SOIC D 14 2500 367.0 367.0 38.0
TLV2774AIDR SOIC D 14 2500 367.0 367.0 38.0
TLV2774CDR SOIC D 14 2500 367.0 367.0 38.0
TLV2774CPWR TSSOP PW 14 2000 367.0 367.0 35.0
TLV2774IDR SOIC D 14 2500 367.0 367.0 38.0
TLV2774IPWR TSSOP PW 14 2000 367.0 367.0 35.0
TLV2775IDR SOIC D 16 2500 367.0 367.0 38.0
TLV2775IPWR TSSOP PW 16 2000 367.0 367.0 35.0
PACKAGE MATERIALS INFORMATION
www.ti.com 17-Aug-2012
Pack Materials-Page 3
MECHANICAL DATA
MCER001A – JANUARY 1995 – REVISED JANUAR Y 1997
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE
0.310 (7,87)
0.290 (7,37)
0.014 (0,36)
0.008 (0,20)
Seating Plane
4040107/C 08/96
5
4
0.065 (1,65)
0.045 (1,14)
8
1
0.020 (0,51) MIN
0.400 (10,16)
0.355 (9,00)
0.015 (0,38)
0.023 (0,58)
0.063 (1,60)
0.015 (0,38)
0.200 (5,08) MAX
0.130 (3,30) MIN
0.245 (6,22)
0.280 (7,11)
0.100 (2,54)
0°–15°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification.
E. Falls within MIL STD 1835 GDIP1-T8
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
