19-1193; Rev 0; 4/97 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers These muxes feature extremely low off leakages (less than 20pA at +25C) and on-channel leakages (less than 50pA at +25C). The new design offers guaranteed low charge injection (3.5pC typical) and electrostatic discharge (ESD) protection greater than 2000V, per method 3015.7. These improved muxes are pin-compatible upgrades for the industry-standard DG506 and DG507. The MAX336/MAX337 operate from a single +4.5V to +30V supply or from dual 4.5V to 20V supplies. All control inputs (whether address or enable) are TTL compatible (0.8V to 2.4V) over the full specified temperature range and over the 4.5V to 18V supply range. ____________________________Features <400 (max) On-Resistance <500ns Transition Time <10 On-Resistance Match <20pA NO-Off Leakage Current at +25C 3.5pC Charge Injection +4.5V to +30V Single Supply 4.5V to 20V Dual Supplies Plug-In Upgrade for Industry-Standard DG506/DG507 Bidirectional Rail-to-Rail(R) Signal Handling TTL/CMOS-Logic Compatible >2000V ESD Protection, per Method 3015.7 ______________Ordering Information ________________________Applications Precision Data Acquisition PART TEMP. RANGE MAX336CPI 0C to +70C MAX336CWI 0C to +70C 28 Wide SO MAX336CAI 0C to +70C 28 SSOP MAX336C/D 0C to +70C Dice* PIN-PACKAGE 28 Plastic DIP Ordering Information continued at end of data sheet. * Contact factory for dice specifications. Precision Signal Routing Test Equipment _____________________Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW V+ 28 COM V+ 1 N.C. 2 27 V- N.C. 3 26 NO8 NO16 4 25 NO7 NO15 5 MAX336 24 NO6 NO14 6 23 NO5 NO13 7 22 NO4 NO12 8 21 NO3 NO11 9 20 NO2 NO10 10 19 NO1 NO9 11 18 EN GND 12 17 A0 N.C. 13 16 A1 A3 14 15 A2 N.C. = NO INTERNAL CONNECTION GND MAX336 NO1 NO2 NO3 NO4 NO5 NO6 NO7 NO8 NO9 NO10 NO11 COM NO12 NO13 NO14 NO15 NO16 CMOS DECODERS/DRIVERS A0 DIP/SO/SSOP V- A1 A2 A3 EN MAX336 16-CHANNEL SINGLE-ENDED MULTIPLEXER A3 A2 A1 A0 EN ON SWITCH X 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 X 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 X 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 X 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 NONE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LOGIC "0" = VAL 0.8V, LOGIC "1" = VAH 2.4V Continued at end of data sheet. Rail-to-Rail is a registered trademark of Nippon Motorola Ltd. ________________________________________________________________ Maxim Integrated Products For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800 1 MAX336/MAX337 _______________General Description The MAX336/MAX337 are monolithic, CMOS analog multiplexers (muxes). The 16-channel MAX336 is designed to connect one of 16 inputs to a common output by control of a 4-bit binary address. The dual, 8-channel MAX337 is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. Both devices can be used as either a mux or a demux. On-resistance is 400 (max), and the devices conduct current equally well in both directions. MAX336/MAX337 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers ABSOLUTE MAXIMUM RATINGS Voltage Referenced to VV+ ............................................................................-0.3V, 44V GND .........................................................................-0.3V, 25V Digital Inputs, A_, EN_, NO, COM (Note 1).............................................(V- - 0.3V) to (V+ + 0.3V) or 30mA (whichever occurs first) Continuous Current (any terminal) ......................................30mA Peak Current, NO or COM (pulsed at 1ms, 10% duty cycle max) ..........................100mA Continuous Power Dissipation (TA = +70C) Plastic DIP (derate 14.29mW/C above +70C) ............1.14W Wide SO (derate 12.50mW/C above +70C).................1.00W SSOP (derate 9.52mW/C above +70C) .....................762mW CERDIP (derate 16.67mW/C above +70C) ..................1.33W Operating Temperature Ranges MAX336C_I/MAX337C_I ......................................0C to +70C MAX336E_I/MAX337E_I....................................-40C to +85C MAX336MJI/MAX337MJI ................................-55C to +125C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10sec) .............................+300C Note 1: Signals on any terminal exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current rating. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS--Dual Supplies (V+ = +15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL MIN CONDITIONS TYP MAX (Note 2) UNITS SWITCH Analog Signal Range On-Resistance VNO, VCOM RON On-Resistance Matching Between Channels RON NO-Off Leakage Current (Note 5) INO(OFF) COM-Off Leakage Current (Note 5) (Note 3) -15 INO = 0.2mA, VCOM = 10V TA = +25C INO = 0.2mA, VCOM = 10V (Note 4) TA = +25C VCOM = +10V, VNO = 10V, VEN = 0V TA = +25C VNO = 10V, VCOM = +10V, MAX336 VEN = 0V TA = +25C VNO = +10V, VCOM = 10V, MAX337 VEN = 0V TA = +25C ICOM(OFF) 220 TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX M C, E M C, E M COM-On Leakage Current (Note 5) 2 ICOM(ON) TA = TMIN to TMAX 0.001 -1.25 1.25 -20 20 -0.05 0.05 -6.5 6.5 -80 80 -0.05 0.05 -3.25 3.25 -40 40 -0.05 0.05 -6.5 6.5 M -80 80 -0.05 0.05 -3.25 3.25 -40 40 C, E M _______________________________________________________________________________________ V 0.02 C, E TA = +25C TA = TMIN to TMAX 10 15 -0.02 C, E 400 500 5 TA = +25C VCOM = 10V, MAX336 VNO = 10V, sequence each switch MAX337 on 15 nA nA nA 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers (V+ = +15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX (Note 2) UNITS INPUT Input Current with Input Voltage High IAH VA = 2.4V or 15V -1.0 Input Current with Input Voltage Low IAL VEN = 0V or 2.4V, VA = 0V -1.0 0.001 1.0 A 1.0 A 20 V SUPPLY Power-Supply Range 4.5 VEN = VA = 0V Positive Supply Current I+ Negative Supply Current I- VEN = 2.4V, VA(ALL) = 2.4V VEN = 0V or 2.4V; VA(ALL) = 0V, 2.4V, or 5V TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX -1 -10 0.01 400 -1 -10 1 10 700 1100 1 10 A A DYNAMIC Transition Time tTRANS Figure 2, TA = +25C Break-Before-Make Interval tOPEN Figure 4, TA = +25C Enable Turn-On Time tON(EN) Figure 3 Enable Turn-Off Time tOFF(EN) Figure 3 Charge Injection (Note 3) Q 200 10 TA = +25C 50 250 TA = TMIN to TMAX TA = +25C 500 ns 500 750 100 TA = TMIN to TMAX 500 750 CL = 100pF, VNO = 0V, RS = 0, Figure 6, TA = +25C 3.5 ns 10 ns ns pC Off Isolation (Note 6) VISO VEN = 0V, RL = 1k, f = 100kHz, TA = +25C -82 dB Crosstalk Between Channels VCT VEN = 2.4V, f = 100kHz, VGEN = 1Vp-p, RL = 1k, Figure 7, TA = +25C -86 dB CIN f = 1MHz, TA = +25C 2 pF f = 1MHz, VEN = VNO = 0V, Figure 8, TA = +25C 2 pF Logic Input Capacitance NO-Off Capacitance COM-Off Capacitance COM-On Capacitance CNO(OFF) f = 1MHz, VEN = 0.8V, CCOM(OFF) VCOM = 0V, Figure 8, TA = +25C MAX336 20 MAX337 10 f = 1MHz, VEN = 2.4V, CCOM(ON) VCOM = 0V, Figure 8, TA = +25C MAX336 22 MAX337 12 pF pF _______________________________________________________________________________________ 3 MAX336/MAX337 ELECTRICAL CHARACTERISTICS--Dual Supplies (continued) 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers MAX336/MAX337 ELECTRICAL CHARACTERISTICS--Single Supply (V+ = +12V, V- = 0V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL MIN CONDITIONS TYP MAX (Note 2) UNITS SWITCH VNO, VCOM Analog Signal Range On-Resistance (Note 3) 0 12 V RON INO = 0.2mA, VCOM = 3V or 10V, TA = +25C 460 700 tTRANS VNO_ = 5V, VIN = 2.4V, Figure 1, TA = +25C 350 600 ns DYNAMIC Transition Time (Note 3) Enable Turn-On Time (Note 3) tON(EN) VINH = 2.4V, VINL = 0V, VNO1 = 5V, Figure 3, TA = +25C 350 600 ns Enable Turn-Off Time (Note 3) tOFF(EN) VINH = 2.4V, VINL = 0V, VNO1 = 5V, Figure 3, TA = +25C 110 500 ns Q CL = 100pF, VNO = 0V, RS = 0, TA = +25C 5.0 10 pC Charge Injection (Note 3) Note 2: The algebraic convention where the most negative value is a minimum and the most positive value a maximum is used in this data sheet. Note 3: Guaranteed by design. Note 4: RON = RON(MAX) - RON(MIN). Note 5: Leakage parameters are 100% tested at the maximum rated hot temperature and guaranteed by correlation at T A = +25C. Note 6: Worst-case isolation is on channel 4 because of its proximity to the drain pin. Off isolation = 20log VCOM/VNO, where VCOM = output and VNO = input to off switch. __________________________________________Typical Operating Characteristics (TA = +25C, unless otherwise noted.) TOTAL HARMONIC DISTORTION vs. FREQUENCY 0 -30 90 45 ON PHASE -50 0 -60 -45 10 -80 -135 50 IN AND OUT V+ = +15V V- = -15V OFF LOSS -90 -100 1 0.1 1 10 FREQUENCY (MHz) 100 10 0.1 0.01 CURRENT SHOWN IS FOR DRIVING ONE INPUT; TOTAL V+ CURRENT IS MULTIPLIED BY NUMBER OF LOGIC INPUTS DRIVEN 0.001 0.01 0.0001 -180 -225 0.1 100 1 -90 -70 4 V+ = +15V V- = -15V SIGNAL = 5Vp-p 600 IN AND OUT I+ (A) 135 THD (%) ON LOSS -20 -40 100 180 PHASE (DEGREES) LOSS (dB) -10 225 SUPPLY CURRENT vs. INPUT VOLTAGE MAX336/337 TOC02 MAX1336/337toc01 MAX336/MAX337 TOC-03a FREQUENCY RESPONSE 0.00001 0.001 10 100 1k 10k 100k 0 3 6 FREQUENCY (Hz) _______________________________________________________________________________________ 9 VIN (V) 12 15 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers ON-RESISTANCE vs. VCOM OVER TEMPERATURE (DUAL SUPPLIES) RON () 400 V = 15V V = 10V 300 TA = +125C 250 TA = +85C 200 150 200 100 100 50 1400 1200 TA = -40C -5 0 5 VCOM (V) 10 15 -15 20 ON-RESISTANCE vs. VCOM OVER TEMPERATURE (SINGLE SUPPLY) TA = +85C 400 RON () 350 300 TA = +25C 250 200 TA = -40C 150 V+ = +20V -5 0 5 VCOM (V) 10 15 0 OFF LEAKAGE vs. TEMPERATURE MAX336/MAX337 TOC-07 TA = +125C 450 -10 1000 100 OFF LEAKAGE (nA) 500 V+ = +15V 0 V+ = +15V V- = -15V 10 4 6 8 10 12 14 16 18 20 VCOM (V) ON LEAKAGE vs. TEMPERATURE 1 ICOM (OFF) 0.1 2 1000 V+ = +15V V- = -15V 100 ON LEAKAGE (nA) -10 V+ = +12V 200 MAX336/337 TOC-08 -15 V+ = +9V 800 400 0 -20 1000 600 TA = +25C V = 20V 0 V- = 0V V+ = +5V 1600 MAX336/MAX337 TOC-04 300 RON () V = 5V 1800 MAX336/MAX337 TOC-05a MAX336/MAX337 TOC-06 600 500 350 RON () 700 ON-RESISTANCE vs. VCOM (SINGLE SUPPLY) 0.01 MAX3336/337 TOC-09 ON-RESISTANCE vs. VCOM 10 1 0.1 ICOM (ON) 0.01 100 0.001 50 0 0.0001 6 8 10 VCOM (V) 12 14 CHARGE INJECTION vs. VCOM 8 6 2 V+ = +15V V- = -15V 0 1000 I+, VA(ALL) = 2.4V 100 25 45 5 65 85 105 125 TEMPERATURE (C) TRANSITION TIME vs. POWER SUPPLIES 1000 900 800 700 10 I+, I- (A) V+ = +12V V- = 0V 4 -55 -35 -15 5 25 45 65 85 105 125 TEMPERATURE (C) SUPPLY CURRENT vs. TEMPERATURE MAX336/MAX337 TOC-10 10 0.0001 -55 -35 -15 MAX336/MAX337 TOC-12 4 tTRANS (ns) 2 MAX336/337 TOC-11 0 Qj (pC) 0.001 INO (OFF) 1 0.1 SINGLE SUPPLY 500 DUAL SUPPLIES 400 300 I-, I+, VA = 0V -2 600 200 0.01 -4 100 0 0.001 -6 -15 -10 -5 0 VCOM (V) 5 10 15 -55 -35 -15 5 25 45 65 TEMPERATURE (C) 85 105 125 5 6 7 8 9 10 11 12 13 14 15 SUPPLY VOLTAGE (V) _______________________________________________________________________________________ 5 MAX336/MAX337 ____________________________Typical Operating Characteristics (continued) (TA = +25C, unless otherwise noted.) MAX336/MAX337 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers ______________________________________________________________Pin Description PIN MAX336 MAX337 NAME 1 1 V+ 2, 3, 13 3, 13, 14 N.C. FUNCTION Positive Supply-Voltage Input No Internal Connection -- 2 COMB 4-11 -- N.C. NO16-NO9 -- 4-11 NO8B-NO1B 12 12 GND 14-17 -- A3-A0 Logic Address Inputs Logic Address Inputs -- 15, 16, 17 A2, A1, A0 18 18 EN 19-26 -- NO1-NO8 -- 19-26 NO1A-NO8A 27 27 V- 28 -- COM -- 28 COMA Analog Signal B Output* (bidirectional) No Internal Connection Analog Signal Inputs* (bidirectional) Analog Signal B Inputs* (bidirectional) Logic Ground Logic Enable Input Analog Signal Inputs* (bidirectional) Analog Signal A Inputs* (bidirectional) Negative Supply-Voltage Input. Connect to GND for single-supply operation. Analog Signal Output* (bidirectional) Analog Signal A Output* (bidirectional) * Analog signal inputs and outputs are names of convenience only; they are identical and interchangeable. __________Applications Information Operation with Supply Voltages Other than 15V Using supply voltages less than 15V will reduce the analog signal range. The MAX336/MAX337 switches operate with 4.5V to 20V bipolar supplies or with a +4.5V to +30V single supply. Connect V- to GND when operating with a single supply. Both device types can also operate with unbalanced supplies such as +24V and -5V. The Typical Operating Characteristics graphs show typical on-resistance with 20V, 15V, 10V, and 5V supplies. (Switching times increase by a factor of two or more for operation at 5V.) Overvoltage Protection Proper power-supply sequencing is recommended for all CMOS devices. Do not exceed the absolute maximum ratings, because stresses beyond the listed ratings may cause permanent damage to the devices. Always sequence V+ on first, then V-, followed by the logic inputs NO and COM. If power-supply sequencing is not possible, add two small signal diodes in series with supply pins for overvoltage protection (Figure 1). Adding diodes reduces the analog signal range to 1V below V+ and 1V above V-, but does not significantly affect the devices' low switch resistance and low leakage characteristics. Device operation is unchanged, and the difference between V+ and V- should not exceed 44V. 6 V+ MAX336 MAX337 NO COM Vg V- Figure 1. Overvoltage Protection Using External Blocking Diodes _______________________________________________________________________________________ 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers +15V A3 V+ NO1 A2 A1 5V NO2-NO15 A0 NO16 EN +2.4V MAX336 VEN 5V COM GND VOUT V- 50 10pF LOGIC INPUT VA 50% 0V 1k -15V VNO1 +15V A2 NO1B A0 NO8B 50 0V 90% 5V COMB V- GND 90% VNO16 EN +2.4V 5V NO1A-NO8A, COMA MAX337 VEN SWITCH OUTPUT VOUT V+ A1 tR < 20ns tF < 20ns +3V tTRANS VOUT tTRANS 10pF 1k -15V Figure 2. Transition Time +15V VEN V+ EN NO1 5V NO2-NO16 A0 A1 A2 A3 50 MAX336 COM GND VOUT V- 10pF 1k LOGIC INPUT VEN A1 A2 50 NO1B 10% SWITCH OUTPUT VOUT 5V NO1A-NO8A, NO2B-NO8B, COMA A0 tOFF(EN) VOUT V+ EN 50% 0V tON(EN) -15V +15V VEN tR < 20ns tF < 20ns +3V 90% 0V MAX337 GND COMB V- VOUT 1k 10pF -15V Figure 3. Enable Switching Time _______________________________________________________________________________________ 7 MAX336/MAX337 ______________________________________________Test Circuits/Timing Diagrams MAX336/MAX337 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers _________________________________Test Circuits/Timing Diagrams (continued) +15V +2.4V V+ EN NO1-NO16 A0 LOGIC INPUT +5V tR < 20ns tF < 20ns +3V 50% 0V A1 A2 VOUT MAX336 80% A3 COM GND SWITCH OUTPUT VOUT V- 10pF 0V 1k 50 tOPEN -15V Figure 4. Break-Before-Make Interval +15V RS NO1-NO16 V+ +3V EN VS A0 CHANNEL SELECT +2.4V OR +0.8V OFF ENABLE ON OFF 0V MAX336 COM A1 VOUT A2 A3 VOUT CL = 100pF GND V- VOUT VOUT IS THE MEASURED VOLTAGE DUE TO CHARGE TRANSFER ERROR Q WHEN THE CHANNEL TURNS OFF. -15V VCTE = CL = VOUT Figure 5. Charge Injection (VCTE) 8 _______________________________________________________________________________________ 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers +15V 10nF +15V 10nF +2.4V +2.4V VIN RS = 50 NO1A EN V+ EN V+ NO2 NO1B 50 NO16 RS = 50 A0 A1 MAX336 COM A2 A3 COMB A0 VOUT A2 10nF COMA VOUT 50 V- GND 10nF -15V OFF ISOLATION = 20log MAX337 A1 50 V- GND NO8B -15V VOUT CROSSTALK = 20log VIN VOUT VIN REPEAT TEST WITH OTHER SWITCH. Figure 6. Off Isolation Figure 7. Crosstalk +15V A3 CHANNEL SELECT EN V+ NO1 A2 NO16 MAX336 A1 A0 GND V- CAPACITANCE METER COM f = 1MHz -15V Figure 8. NO/COM Capacitance _______________________________________________________________________________________ 9 MAX336/MAX337 _________________________________Test Circuits/Timing Diagrams (continued) MAX336/MAX337 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers ________Pin Configurations/Functional Diagrams/Truth Tables (continued) TOP VIEW V+ 28 COMA V+ 1 N.C. 3 26 NO8A NO8B 4 25 NO7A NO7B 5 NO6B 6 MAX337 24 NO6A 23 NO5A NO5B 7 22 NO4A NO4B 8 21 NO3A NO3B 9 20 NO2A NO2B 10 19 NO1A NO1B 11 18 EN GND 12 17 A0 N.C. 13 16 A1 N.C. 14 15 A2 GND NO1A NO2A NO3A NO4A NO5A NO6A NO7A 27 V- COMB 2 V- COMA NO8A NO1B NO2B NO3B NO4B NO5B NO6B NO7B COMB NO8B CMOS DECODERS/DRIVERS A0 DIP/SO/SSOP A1 A2 EN MAX337 8-CHANNEL DIFFERENTIAL MULTIPLEXER MAX337 A2 A1 A0 EN ON SWITCH X 0 0 0 0 1 1 1 1 X 0 0 1 1 0 0 1 1 X 0 1 0 1 0 1 0 1 0 1 1 1 1 1 1 1 1 NONE 1 2 3 4 5 6 7 8 LOGIC "0" = VAL 0.8V, LOGIC "1" = VAH 2.4V 10 ______________________________________________________________________________________ 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers PART MAX336EPI MAX336EWI MAX336EAI MAX336EJI MAX336MJI MAX337CPI MAX337CWI MAX337CAI MAX337C/D MAX337EPI MAX337EWI MAX337EAI MAX337EJI MAX337MJI TEMP. RANGE -40C to +85C -40C to +85C -40C to +85C -40C to +85C -55C to +125C 0C to +70C 0C to +70C 0C to +70C 0C to +70C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -55C to +125C * Contact factory for dice specifications. ** Contact factory for availability. PIN-PACKAGE 28 Plastic DIP 28 Wide SO 28 SSOP 28 CERDIP** 28 CERDIP** 28 Plastic DIP 28 Wide SO 28 SSOP Dice* 28 Plastic DIP 28 Wide SO 28 SSOP 28 CERDIP** 28 CERDIP** ___________________Chip Topography N.C (COMB) V+ COM (COMA) V- N08 (N08A) N016 (N08B) N07 (N07A) N015 (N07B) N06 (N06A) N014 (N06B) N05 (N05A) N013 (N05B) N04 (N04A) N012 (N04B) N03 (N03A) N011 (N03B) N02 (N02A) N010 (N02B) N01 (N01A) N09 (N01B) 0.139" (3.53mm) GND A3 (N.C.) A2 A1 A0 EN 0.092" (2.34mm) ( ) ARE FOR MAX337 TRANSISTOR COUNT: 466 BACKSIDE IS V+ SUBSTRATE CONNECTED TO V+ ______________________________________________________________________________________ 11 MAX336/MAX337 __Ordering Information (continued) SSOP.EPS ________________________________________________________________Package Information SOICW.EPS MAX336/MAX337 16-Channel/Dual 8-Channel, Low-Leakage, CMOS Analog Multiplexers Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 12 __________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600 (c) 1997 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products. ENGLISH * ???? * ??? * ??? WHAT'S NEW PRODUCTS SOLUTIONS DESIGN APPNOTES SUPPORT BUY COMPANY MEMBERS MAX336 Part Number Table Notes: 1. See the MAX336 QuickView Data Sheet for further information on this product family or download the MAX336 full data sheet (PDF, 184kB). 2. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales. 3. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day. 4. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: See full data sheet or Part Naming C onventions. 5. * Some packages have variations, listed on the drawing. "PkgC ode/Variation" tells which variation the product uses. Part Number Free Sample Buy Direct Package: TYPE PINS SIZE DRAWING CODE/VAR * Temp RoHS/Lead-Free? Materials Analysis MAX336MJI RoHS/Lead-Free: No MAX336EUI-T RoHS/Lead-Free: No MAX336C UI-T RoHS/Lead-Free: No MAX336C UI RoHS/Lead-Free: No MAX336EUI RoHS/Lead-Free: No MAX336C /D RoHS/Lead-Free: No MAX336EPI+ PDIP;28 pin;.600" Dwg: 21-0044B (PDF) Use pkgcode/variation: P28+2* -40C to +85C RoHS/Lead-Free: Yes Materials Analysis MAX336C PI PDIP;28 pin;.600" Dwg: 21-0044B (PDF) Use pkgcode/variation: P28-2* 0C to +70C RoHS/Lead-Free: No Materials Analysis MAX336EPI PDIP;28 pin;.600" Dwg: 21-0044B (PDF) Use pkgcode/variation: P28-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis MAX336EWI+ SOIC ;28 pin;.300" Dwg: 21-0042B (PDF) Use pkgcode/variation: W28+6* -40C to +85C RoHS/Lead-Free: Yes Materials Analysis MAX336EWI+T SOIC ;28 pin;.300" Dwg: 21-0042B (PDF) Use pkgcode/variation: W28+6* -40C to +85C RoHS/Lead-Free: Yes Materials Analysis MAX336C WI+T SOIC ;28 pin;.300" Dwg: 21-0042B (PDF) Use pkgcode/variation: W28+6* 0C to +70C RoHS/Lead-Free: Yes Materials Analysis MAX336C WI-T SOIC ;28 pin;.300" Dwg: 21-0042B (PDF) Use pkgcode/variation: W28-6* 0C to +70C RoHS/Lead-Free: No Materials Analysis MAX336C WI SOIC ;28 pin;.300" Dwg: 21-0042B (PDF) Use pkgcode/variation: W28-6* 0C to +70C RoHS/Lead-Free: No Materials Analysis MAX336C WI+ SOIC ;28 pin;.300" Dwg: 21-0042B (PDF) Use pkgcode/variation: W28+6* 0C to +70C RoHS/Lead-Free: Yes Materials Analysis MAX336EWI-T SOIC ;28 pin;.300" Dwg: 21-0042B (PDF) Use pkgcode/variation: W28-6* -40C to +85C RoHS/Lead-Free: No Materials Analysis MAX336EWI SOIC ;28 pin;.300" Dwg: 21-0042B (PDF) Use pkgcode/variation: W28-6* -40C to +85C RoHS/Lead-Free: No Materials Analysis MAX336C AI-T SSOP;28 pin;.209" Dwg: 21-0056C (PDF) Use pkgcode/variation: A28-1* 0C to +70C RoHS/Lead-Free: No Materials Analysis MAX336C AI SSOP;28 pin;.209" Dwg: 21-0056C (PDF) Use pkgcode/variation: A28-1* 0C to +70C RoHS/Lead-Free: No Materials Analysis MAX336C AI+ SSOP;28 pin;.209" Dwg: 21-0056C (PDF) Use pkgcode/variation: A28+1* 0C to +70C RoHS/Lead-Free: Yes Materials Analysis MAX336C AI+T SSOP;28 pin;.209" Dwg: 21-0056C (PDF) Use pkgcode/variation: A28+1* 0C to +70C RoHS/Lead-Free: Yes Materials Analysis MAX336EAI+T SSOP;28 pin;.209" Dwg: 21-0056C (PDF) Use pkgcode/variation: A28+1* -40C to +85C RoHS/Lead-Free: Yes Materials Analysis MAX336EAI+ SSOP;28 pin;.209" Dwg: 21-0056C (PDF) Use pkgcode/variation: A28+1* -40C to +85C RoHS/Lead-Free: Yes Materials Analysis MAX336EAI-T SSOP;28 pin;.209" Dwg: 21-0056C (PDF) Use pkgcode/variation: A28-1* -40C to +85C RoHS/Lead-Free: No Materials Analysis MAX336EAI SSOP;28 pin;.209" Dwg: 21-0056C (PDF) Use pkgcode/variation: A28-1* -40C to +85C RoHS/Lead-Free: No Materials Analysis Didn't Find What You Need? C ONTAC T US: SEND US AN EMAIL C opyright 2 0 0 7 by M axim I ntegrated P roduc ts , Dallas Semic onduc tor * Legal N otic es * P rivac y P olic y