SM13TS-SR-FREQ-50H3JK - Pletronics, Inc.

to specifications per the terms of the Pletronics standard warranty. Production

processsing does not necesarily include testing of all parameters.

-160

-140

-120

-100

-80

-60

-40

-20

0

20

40

60

80

100

120

140

160

-60 -40 -20 0 20 40 60 80 100 120

Temperature (oC)

Deviation (ppm)

SM13T Series

Miniature SMD Crystal

August 2007

• The Pletronics’ SM13T Series is a miniature

surface mount crystal.

• The package is ideal for automated surface

mount assembly and reflow practices.

• Tape and Reel packaging

• 6 MHz to 70 MHz Fundamental

• 40 MHz to 100 MHz 3rd Overtone

• 5 x 7 mm 4 pad

• AT Cut Crystals

• Ideal for use in hand held consumer products.

•High endurance version available

Pletronics Inc. certifies this device is in accordance with the

RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.

Pletronics Inc. guarantees the device does not contain the following:

Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s

Weight of the Device: 0.16 grams

Moisture Sensitivity Level: 1 As defined in J-STD-020C

Second Level Interconnect code: e4

Electrical Specification:

Item Min Max Unit Condition

Frequency Range 6 70 MHz Fundamental

40 100 MHz 3rd overtone

Calibration Frequency Tolerance 10 50 ppm at +25oC +_ 3oC, see part number for options

Frequency Stability over OTR 10 150 ppm see part number for available options

Equivalent Series Resistance

(ESR)

- 100 Ohms 6 MHz to 7.4 MHz

Fundamental

- 60 Ohms 7.4 MHz to 9.8 MHz

- 50 Ohms 9.8 MHz to 20 MHz

- 40 Ohms 20 MHz to 70 MHz

- 80 Ohms 40 MHz to 100 MHz 3rd Overtone

Drive Level - 100 μW use 10 μW for testing

Shunt Capacitance (C0) - 7 pF Pad to Pad capacitance

Aging -5 +5 ppm /Yr for the first year at +25oC +_ 3oC

-2 +2 ppm /Yr after the first year at +25oC +_ 3oC

Operating Temperature Range -40 +125 oC see part number for available options

Storage Temperature Range -55 +125 oC

AT Cut Crystal Frequency

versus Temperature

Typical Performance:

SM13T Series

Miniature SMD Crystal

August 2007

www.pletronics.com 425-776-1880 2

Part Number:

SM13T -18 -12.0M -50 H 1 E G -XX See chart below for available options

Internal code or blank

Highest Specified Operating Temperature

A = 40oC G = 70oCN = 100oC

B = 45oCH = 75oCP = 105oC

C = 50oCJ = 80oCR = 110oC

D = 55oCK = 85oCS = 115oC

E = 60oCL = 90oCT = 120oC

F = 65oCM = 95oCU = 125oC

Lowest Specified Operating Temperature

A = +10oC F = -15oCL = -40oC

B = +5oCG = -20oCM = -45oC

C = 0oCH = -25oCN = -50oC

D = -5oCJ = -30oCP = -55oC

E = -10oCK = -35oC

Mode: 1 = Fundamental 3 =3rd Overtone

Frequency Stability See chart below

Calibration Frequency Tolerance (Typ. Values shown)

10 = +_ 10 ppm at 25oC +_ 3oC

20 = +_ 20 ppm at 25oC +_ 3oC

50 = +_ 50 ppm at 25oC +_ 3oC (Standard)

Frequency in MHz

Cload in pF

Load Resonance from 06 to 32 pF (18 pF Std) -or-

SR = Series Resonance

Series Model

SM13T = Standard Version

SM13TS = High Endurance Version

Available Frequency Stability versus Temperature in ppm

Operating

Temperature Range

ABCDEFGHJK

CODE +_ 3.0 +_ 5.0 +_ 8.0 +_ 10 +_ 15 +_ 20 +_ 30 +_ 50 +_ 100 +_ 150

0 to +45oCCB !!!!!!!!!!

0 to +50oCCC !!!!!!!!!!

0 to +60oCCE !!!!!!!!!!

0 to +70oCCG !!!!!!!!!

-10 to +50oCEC !!!!!!!!!

-10 to +60oCEE !!!!!!!!!

-10 to +75oCEH !!!!!!!!

-20 to +70oCGG !!!!!STD !!

-20 to +75oCGH !!!!!!!

-30 to +75oCJH !!!!!!!

-30 to +80oCJJ !!!!!!!

-30 to +85oCJK !!!!!!!

-35 to +80oCKJ !!!!!!

-40 to +85oCLK !!!!!!

-40 to +90oCLL !!!!!!

-40 to +105oCLP !!!!!!

-40 to +125oCLU !!!!

SM13T Series

Miniature SMD Crystal

August 2007

www.pletronics.com 425-776-1880 3

Legacy Part Number (not for new designs):

SM13T B E -18 -11.0592M -XX

Internal code or blank

Frequency in MHz

Cload in pF

Parallel Resonance from 6 to 32 pF or

SR = Series Resonance

Operating Temperature Range

Blank = 0 to + 70oC

E = -40 to +85oC

Calibration Tolerance / Frequency Stability

Blank = 50/50 (Standard)

A = 30/50

B = 30/30

C = 15/30

D = 10/20 (not all frequencies)

Series Model

SM13T = Standard Version

SM13TS = High Endurance Version

Reliability: Environmental Compliance

Parameter Condition for SM13T SM13TS

Mechanical Shock MIL-STD-883 Method 2002, Condition B Condition D

Vibration MIL-STD-883 Method 2007, Condition A Condition B

Solderability MIL-STD-883 Method 2003 same

Thermal Shock MIL-STD-883 Method 1011, Condition A same

Package Labeling

Label is 1" x 2.6" (25.4mm x 66.7mm) Label is 1" x 2.6" (25.4mm x 66.7mm)

Font is Courier New Font is Arial

Bar code is 39-Full ASCII

SM13T Series

Miniature SMD Crystal

August 2007

www.pletronics.com 425-776-1880 4

Mechanical:

Inches mm

A 0.197 +_ 0.008 5.0 +_ 0.2

B 0.276 +_ 0.008 7.0 +_ 0.2

C 0.044 max 1.1 max

D10.039 1.0

E10.061 1.54

F10.181 4.6

1 Typical dimensions

Not to Scale

Contacts :

Gold 11.8 μinches 0.3 μm minimum over Nickel 50 to 350 μinches 1.27 to 8.89 μm

Connection (top view):

The pads shown not connected to the crystal

are common and connected to the metal cover.

Layout and application information

• Trace lengths to the crystal should be kept as short as possible.

• The crystal connections are sensitive to noise.

• The package should be grounded for optimum performance.

SM13T Series

Miniature SMD Crystal

August 2007

www.pletronics.com 425-776-1880 5

Part Marking:

SM13Tx

FFF.FFF M

PLEymdz

or SM13TSx

FFF.FFF M

PLEymdz

or SM13T-zz

FFF.FFF M

PLEyywwz

Legend:

PLE = Pletronics

x = Capacitance load code from below

FFF.FFM = Frequency in MHz

YMD = Date of Manufacture (year, month and day)

All other marking is internal factory codes

Specifications such as frequency tolerance and operating temperature range, etc. are not identified

from the marking. External packaging labels and packing list will correctly identify the ordered

Pletronics part number.

• Orientation of marking may be mixed on the tape

• Traceability of part is lost once removed from reel

Code ABCDEFGHJKLMNPQR S TUVWXY

pF 101213 8 151820222426283032343627series 33 50 19 16 17 14

Codes for Date Code YMD

Code 6 7 8 9 0 1 2

Year 2006 2007 2008 2009 2010 2011 2012

Code A B C D E F G H J K L M

Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

Code123456789ABC

Day 123456789101112

Code D E F G H J K L M N P R

Day 13 14 15 16 17 18 19 20 21 22 23 24

Code T U V W X Y Z

Day 25 26 27 28 29 30 31

SM13T Series

Miniature SMD Crystal

August 2007

www.pletronics.com 425-776-1880 6

260°C Maximum

10 Seconds Maximum

215°C±10°C

Approximately 50 Seconds

Allowed rate of temperature change

Maximum 4°C per second

120 to 160 Seconds

100

150

200

250

Temperature (°C)

175°C±10°C

Reflow Cycle (typical for lead free processing)

The part may be reflowed 2 times without degradation.

Tape and Reel: available for quantities of 250 to 3000 per reel (<1000 will be cut tape)

Constant Dimensions Table 1

Tape

Size D0 D1

Min E1 P0 P2 S1

Min

T

Max

T1

Max

8mm

1.5

+0.1

-0.0

1.0

1.75

+_0.1

4.0

+_0.1

2.0

+_0.05

0.6 0.25 0.1

12mm 1.5

16mm 1.5 2.0

+_0.1

24mm 1.5

Variable Dimensions Table 2

Tape

Size

B1

Max

E2 Min F P1 T2

Max

W

Max

Ao, Bo

& Ko

16 mm 8.1 14.25 7.5 +_0.1 12.0 +_0.1 1.8 16.3 Note 1

Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale

REEL DIMENSIONS

A inches 7.0 10.0 13.0

mm 177.8 254.0 330.2

B inches 2.50 4.00 3.75

mm 63.5 101.6 95.3 Tape

Width

C mm 13.0 +0.5 / -0.2

D mm 16.4

+2.0

-0.0

16.4

+2.0

-0.0

16.4

+2.0

-0.0

16.0

Reel dimensions may vary from the above

SM13T Series

Miniature SMD Crystal

August 2007

www.pletronics.com 425-776-1880 7

IMPORTA NT NOTICE

Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and

other changes to this product at anytime. PLE reserves the right to discontinue any product or service

without notice. Customers are responsible for obtaining the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to

PLE’s terms and conditions of sale supplied at the time of order acknowledgment.

PLE warrants performance of this product to the specifications applicable at the time of sale in accordance

with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE

deems necessary to support this warranty. Except where mandated by specific contractual documents,

testing of all parameters of each product is not necessarily performed.

PLE assumes no liability for application assistance or customer product design. Customers are

responsible for their products and applications using PLE components. To minimize the risks associated

with the customer products and applications, customers should provide adequate design and operating

safeguards.

PLE products are not designed, intended, authorized or warranted to be suitable for use in life support

applications, devices or systems or other critical applications that may involve potential risks of death,

personal injury or severe property or environmental damage. Inclusion of PLE products in such

applications is understood to be fully at the risk of the customer. Use of PLE products in such applications

requires the written approval of an appropriate PLE officer. Questions concerning potential risk

applications should be directed to PLE.

PLE does not warrant or represent that any license, either express or implied, is granted under any PLE

patent right, copyright, artwork or other intellectual property right relating to any combination, machine or

process which PLE product or services are used. Information published by PLE regarding third-party

products or services does not constitute a license from PLE to use such products or services or a

warranty or endorsement thereof. Use of such information may require a license from a third party under

the patents or other intellectual property of the third party, or a license from PLE under the patents or other

intellectual property of PLE.

Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is

without alteration and is accompanied by associated warranties, conditions, limitations and notices.

Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not

responsible or liable for such altered documents.

Resale of PLE products or services with statements different from or beyond the parameters stated by

PLE for that product or service voids all express and implied warranties for the associated PLE product or

service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.

Contacting Pletronics Inc.

Pletronics Inc. Tel: 425-776-1880

19013 36th Ave. West Fax: 425-776-2760

Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com

URL: www.pletronics.com