ALUMINUM ELECTROLYTIC CAPACITORS SA 7mmL, For General Purposes series Standard miniature series with 7mm height. SR 7mmL, High CV series Higher CV series with 7mm height. Smaller (SR series) ST High Temperature Compliant to the RoHS directive (2011/65/EU). SA Bi-polarized SP Smaller SR Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current SA series SR series - 40 to +85C -40 to +85C 6.3 to 50V 4 to 50V 0.1 to 220F 0.1 to 470F 20% at 120Hz, 20C After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. Measurement frequency : 120Hz at 20C Tangent of loss angle (tan ) Rated voltage (V) tan (MAX.) Stability at Low Temperature Rated voltage (V) Impedance ratio Z- 25C / Z+20C ZT / Z20 (MAX.) Z- 40C / Z+20C 4 0.35 6.3 0.24 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 Measurement frequency : 120Hz 4 6 12 The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Endurance 6.3 4 8 10 3 6 Marking 50 2 3 Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 U S A 11 A2 33 3 4 0 5M 6D 7D d Sleeve (P.E.T.) 8 9 10 11 US A 1 A 3 3 0 M DD d Configuration P0.5 D+0.5MAX Capacitance tolerance (20%) P0.5 D+0.5MAX 35 2 3 Type numbering system (Example : SA series : 10V 33F) Radial Lead Type L+1MAX L+1MAX 15MIN 15MIN Capacitance tolerance (2 Rated voltage (10V) (mm) 4MIN 4MIN D P d 4 5 6.3 1.5 2.0 2.5 D 0.45 4 0.45 5 0.45 P d 8 3.5 6.3 0.5 1.5 2.0 2.5 0.45 0.45 0.45 Rated capacitance (33 Series name (mm) Type 8 3.5 0.5 Configuration D 4 to 8 Configuration DD Code Series 0.1 0R1 0.22 R22 0.33 R33 0.47 R47 1 010 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 33 330 47 470 100 101 220 221 330 331 470 471 4 (0G) SR 6.3 (0J) SA SR 10 (1A) SA SR Pb-free leadwire Pb-free PET sleeve 25 (1E) DD SA SR 4 to 8 35 (1V) SA SR 4x7 33 4x7 39 5x7 65 6.3 x 7 110 8x7 165 8x7 240 4x7 34 5x7 42 5x7 50 6.3 x 7 77 8x7 130 4x7 34 4x7 40 4x7 48 5x7 78 6.3 x 7 120 8x7 180 5x7 38 5x7 47 6.3 x 7 59 8x7 96 4x7 35 4x7 43 5x7 59 6.3 x 7 87 8x7 145 120 Hz 1.00 4x7 28 5x7 44 6.3 x 7 57 6.3 x 7 68 8x7 107 4x7 28 4x7 39 5x7 55 5x7 65 6.3 x 7 98 8x7 150 5x7 33 6.3 x 7 51 6.3 x 7 63 8x7 78 4x7 28 5x7 48 5x7 58 6.3 x 7 71 8x7 115 4x7 24 5x7 36 6.3 x 7 57 8x7 72 4x7 24 4x7 31 5x7 52 6.3 x 7 65 8x7 85 50 (1H) SA SR 4x7 1.0 4x7 2.3 4x7 3.5 4x7 5.0 4x7 10 4x7 19 4x7 24 5x7 29 6.3 x 7 44 8x7 65 4x7 1.0 4x7 2.3 4x7 3.5 4x7 5.0 4x7 10 4x7 19 4x7 24 4x7 28 5x7 38 6.3 x 7 58 8x7 75 Case size D x L (mm) Rated ripple Rated ripple current (mArms) at 85C 120Hz Frequency coefficient of rated ripple current 50 Hz 0.70 16 (1C) SA SR 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Rated voltage (1 Series na T Pb-free leadwire Pb-free PET sleeve D V(Code) Configuratio Rated capacitance (33 F) Dimensions Frequency Coefficient 25 2 4 After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Cap.(F) 16 2 4 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D