DC/DC Converters THL 20WI Series, 20 Watt Features Smallest encapsulated 20W converter! CB Ultra compact size: 1.0" x 1.0" x 0.4" 226037 Scheme IEC 60950-1 Shielded metal case with isolated baseplate Ultrawide 4:1 input voltage ranges Very high efficiency up to 90% Output voltage adjustable Remote On/Off control Operating temp. range -40C to +75C and up to +85C with heat-sink I/O isolation voltage 1500 VDC Lead free design, RoHS compliant 3-year product warranty The THL 20WI series is the latest generation of dc-dc converter modules with highest power density. The product achieves 20 Watt output power while it comes in a metal case with dimensions of only 1.0"x 1.0"x 0.4". All models have an ultra wide 4:1 input voltage range and precisely regulated output voltages. Highest efficiency of up to 90% makes this product very reliable and applicable in temperature ranges of up to +75C or +85C with optional mounted heat sink. Typical applications are in mobile equipments, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Output voltage Output current max. Efficiency typ. THL 20-2410WI Order code 3.3 VDC 4500 mA 87 % THL 20-2411WI 5.0 VDC 4000 mA 89 % 12 VDC 1670 mA 89 % 15 VDC 1340 mA 89 % THL 20-2412WI THL 20-2413WI THL 20-2415WI Input voltage range 9 - 36 VDC (24 VDC nominal) 24 VDC 835 mA 88 % THL 20-2422WI 12 VDC 835 mA 89 % THL 20-2423WI 15 VDC 670 mA 89 % THL 20-4810WI 3.3 VDC 4500 mA 88 % THL 20-4811WI 5.0 VDC 4000 mA 89 % THL 20-4812WI 12 VDC 1670 mA 89 % 15 VDC 1340 mA 89 % 24 VDC 835 mA 88 % THL 20-4822WI 12 VDC 835 mA 89 % THL 20-4823WI 15 VDC 670 mA 89 % THL 20-4813WI THL 20-4815WI http://www.tracopower.com 18 - 75 VDC (48 VDC nominal) Page 1 of 4 DC/DC Converters THL 20WI Series 20 Watt Input Specifications Input current at no load - 24 Vin (at nominal input voltage) - 48 Vin 3.3 VDC 5.0 VDC all other 3.3 VDC 5.0 VDC all other models: models: models: models: models: models: 80 mA typ. 90 mA Typ. 40 mA typ. 40 mA typ. 45 mA typ. 25 mA typ. Input current at full load - 24 Vin (at nominal input voltage) - 48 Vin 3.3 VDC other 3.3 VDC other models: models: models: models: 700 mA typ. 940 mA typ.. 350 mA typ. 470 mA typ. Start-up voltage 24 V models: 9 VDC (or lower) 48 V models: 18 VDC (or lower) Surge voltage (1 s max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reflected input ripple current 24 Vin models: 50 mAp-p typ. 48 Vin models: 30 mAp-p typ. Conducted noise (input) EN 55032 class A, FCC part 15, level A with external components (see application note) ESD (electrostatic discharge) EN 61000-4-2, air 8 kV, contact 4 kV, perf. criteria B Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Recommended input fuse (slow blow) 24 Vin models: 5000 mA 48 Vin models: 2500 mA Output Specifications Voltage set accuracy 1 % Output voltage adj. range 10 % for single output models only - For further information see application note www.tracopower.com/overview/thl20wi Regulation - Input variation (Vmin - Vmax) - Load variation single dual single dual output output output output models: models: models: models: Minimum load single output models: dual output models: 0.2 % max. 0.5 % max. 0.5 % max. (0 - 100 % load) 1.0 % max. (8 - 100 % balanced load) not required 8 % of rated max current (operation at lower load condition will not damage the converters. However, they may not meet all listed specifications) Ripple and noise (20 MHz bandwidth) 3.3 & 5.0 VDC models: 75 mVp-p typ. 12 & 15 VDC models: 100 mVp-p typ. 24 VDC models: 150 mVp-p typ. Measured with a 1F M/C and a 10F T/C Temperature coefficient 0.02 %/K Output current limitation at 150 % of Iout max., foldback Short circuit protection indefinite, automatic recovery Transient response setting time 300 s typ. (25% load step change) Max. capacitive load http://www.tracopower.com 3.3 5 12 15 24 12 15 VDC VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: models: 10'300 F 6'800 F 1'200 F 750 F 300 F 680 F (each output) 380 F (each output) Page 2 of 4 DC/DC Converters THL 20WI Series 20 Watt General Specifications Temperature ranges - - - - Operating (convection cooling 50 LFM, 0.25 m/s) Operating with heat sink (natural convection 20 LFM) Case temperature Storage Load derating - without heat sink 24 Vin; 3.3 VDC (convection cooling 50 LFM, 0.25 m/s) 48 Vin; 3.3 VDC 5, 12 & 15 VDC single output 24 VDC output dual output - with heat sink 24 V; 3.3 VDC 48 V; 3.3 VDC 5, 12 & 15 VDC output 24 VDC output dual output Thermal inpedance models: models: models: models: models: models: models: models: models: models: -40C to +75C (with derating) -40C to +85C (with derating) +105C max. -50C to +125C 2.5 %/K above +64C 2.7 %/K above +68C 2.2 %/K above +60C 2.0 %/K above +55C 2.2 %/K above +60C 3.3 %/K above +70C 3.2 %/K above +74C 3.1 %/K above +67C 2.7 %/K above +63C 3.1 %/K above +67C - Natural convection18.2C/W - Natural convection with heat sink 15.3C/W Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >451'600 h Isolation voltage (60 s) - Input/Output 1500 VDC Isolation capacitance - Input/Output (100 kHz, 1 V) 1500 pF max. - Input/Case 1000 VDC - Output/Case 1000 VDC Isolation resistance - Input/Output (500 VDC) >1000 MOhm Remote On/Off - On: 3.5 ... 12 VDC or open circuit - Off: 0 ... 1.2 VDC or short circuit pin 6 and pin 2 - Off idle current: 10 mA Switching frequency (fixed) 330 kHz typ. (pulse width modulation PWM) Altitude during operation 5`000 m max. (16`400 ft) approved Safety standards (designed to meet) UL/cUL 60950-1, IEC/EN 60950-1 Safety approvals - CSA certificate of compliance CAN/CSA-C22.2 No 60950-1-07, Am 1:2011 ANSI/UL Std No 60950-1, 2nd Ed, AM 1:2011 - CB test certificate IEC 60950-1:2005 2nd Ed, Am 1:2009 - Certification documents www.tracopower.com/overview/thl20wi Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU Physical Specifications Casing material aluminium alloy Pin material copper alloy with gold platet nickel subplate Baseplate non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 15 g (0.53 oz) Soldering temperature 260C / 10 s max. Application note : www.tracopower.com/overview/thl20wi All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters THL 20WI Series 20 Watt Outline Dimensions 7.62 5.08 (0.3) (0.2) 3 6.0 10.2 2.5 10.16 10.16 (0.24) (0.4) (0.1) (0.4) (0.4) (1.0) 2.5 4 5 (0.1) Bottom view 25.4 (0.8) 20.32 1 2 6 Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) 3 +Vout +Vout 4 Trim Common 5 -Vout -Vout 6 Remote On/Off 25.4 (1.0) Dimensions in [mm], () = Inch Pin diameter o 1.0 (0.04) Pin pitch tolerances: 0.25 (0.01) Tolerances: 0.5 (0.02) Heat-Sink (Option) Order code: THL-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 4 g (0.14 oz) without converter Thermal impedance after assembling: 15.8 K/W 31.0 (1.22) max. Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heat-sink already mounted. Please contact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. Heat-sink Thermal pad Clamp Converter 16.3 (0.64) 17.5 (0.69) max. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. March 27. 2018 Page 4 of 4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: THL 20-2423WI THL 20-4811WI THL 20-2411WI THL 20-2422WI THL 20-4815WI THL 20-4812WI THL 204822WI THL 20-4813WI THL 20-2412WI THL 20-2415WI THL 20-2410WI THL 20-2413WI THL 20-4823WI THL 20-4810WI