DO NOT
SCALE FROM
THIS PRINT
HTMS-1XX-XX-X-D-SM-X-XX
No OF POSITIONS
-02 THRU -40
(PER ROW)
BODY SPECIFICATION
-D: DOUBLE (USE HTMS-50-D)
LEAD STYLE
SEE TABLE 1
PLATING SPECIFICATION
-P: PICK & PLACE PAD
(USE PPP-22)
(SEE SHT 2, FIG 3)
(5 POS MIN)
OPTION
-SM: SURFACE MOUNT
OPTION
OPTION
-XXX: POLARIZING SPECIFICATION
(INDICATES POS TO BE OMITTED)
-A: ALIGNMENT PIN
STAKED (6 POS MIN)
OR MOLDED (5 POS MIN)
(SEE SHT 2, FIG 2)
(SAMTEC'S DISCRETION)
-LC: LOCKING CLIP
(SEE SHT 2, FIG 4)
(5 POS MIN)
(USE LC-05-X)
-TR: TAPE AND REEL
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-T: MATTE TIN CONTACT AND TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-F: 3µ" FLASH SELECTIVE GOLD ON CONTACT AREA,
MATTE TIN ON TAIL
( LEAD STYLE -01, -51 & -52 ONLY)
-L: 10µ" LIGHT SELECTIVE GOLD ON CONTACT AREA,
MATTE TIN ON TAIL
[+.05/-.25]
(No OF POS x .050 [1.27]) +.002/-.010
.196 4.98
REF
.100 2.54
REF
.050
REF
1.27 2
MAX SWAY
(EITHER DIRECTION)
01 79
02 80
HTMS-50-D
SEE NOTE 4
.100 2.54
REF
.018
SQ REF
0.46
AREA
CONTACT
2
MAX SWAY
(EITHER DIRECTION)
T-1M6-XX-X-2
FIG 1
HTMS-1XX-XX-X-D-SM SHOWN
"B"
.050 1.27
(MEASURE AT
BEND RADIUS)
.2960
REF
7.518
.050
(TYP)
1.27
(SEE NOTE 6)
90°
-
2°
+
4°
(TYP)
2
MAX SWAY
(EITHER DIRECTION)
C
C
C
.004 [.10]
C
AI
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
"NEW" ASSEMBLY DRAWING
BY:
HTMS-1XX-XX-X-D-SM-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
12/12/2000
2
1
SHEET SCALE: 2:1
INSULATOR: BLACK, LCP, UL 94 VO
TERMINAL: PHOS BRONZE
F:\DWG\MISC\MKTG\HTMS-1XX-XX-X-D-SM-X-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM CUT FLASH: .010[.25].
3. MINIMUM PUSHOUT FORCE: 2 LBS
4. MAXIMUM PIN ROTATION IN BODY: 2°.
5. MAXIMUM ALLOWABLE BOW: .005[.13] INCH/INCH
AFTER ASSEMBLY.
6. SHEAR TAILS TO DIMENSION SHOWN.
7. MAXIMUM BURR ALLOWANCE: .003[.08]
8. TUBE POSITIONS -05 THRU -40 ONLY FOR THIS LEAD STYLE,
UNLESS OTHERWISE NOTED, LAYER PACKAGE POSITIONS -02 THRU -04.
9. TUBE POSITIONS -07 THRU -40 ONLY FOR THIS LEAD STYLE,
UNLESS OTHERWISE NOTED, LAYER PACKAGE POSITIONS -02 THRU -06.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DEAN P
REVISION AI
.0430
REF
1.092
.040 1.02
REF
.090 2.29
2
MAX SWAY
(EITHER DIRECTION)
SM-A8
.105 2.67
.056
REF
1.42
.055
REF
1.40
LC-05-X
FIG 4
-LC OPTION: STAKED LOCKING CLIP
(5 POSITIONS MINIMUM)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.090 2.29
REF
.0430 1.092
REF
.040 1.02
REF
.375
REF
9.53
"Q"
"N"
.230 5.84
REF
PPP-22
C
L
.390
REF
9.91
REF
(No OF POS -2) x .0500[1.270]
(No OF POS - 2) x .050[1.27]
(No OF POS - 2) x .050[1.27]
STAKED ALIGNMENT PIN
(6 POSITIONS MINIMUM)
MOLDED ALIGNMENT PIN
(5 POSITIONS MINIMUM)
FIG 2
-A OPTION: ALIGNMENT PIN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FIG 3
-P: PICK & PLACE
"N" = USE MEASURED DIM
"Q" = {("N" - .375 [.375]) / 2}
.020 [.51]
SHEET OF
"NEW" ASSEMBLY DRAWING
BY:
HTMS-1XX-XX-X-D-SM-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
12/12/2000
2
2
SHEET SCALE: 2:1
REVISION AI
F:\DWG\MISC\MKTG\HTMS-1XX-XX-X-D-SM-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
