Recommended Crimp Tool – M22520/2-01
Positioner – T5747
Contact Insertion/Removal Tool – Z80-280
See pages 77 to 79
Instruction sheets available at www.harwin.com/downloads/instructions
TOOLS WIRE STRIPPING DETAILS
M80-460
M80-461
M80-480
M80-481
CALCULATION
AB + 12
BTotal No. of contacts – 2
CB + 7
Polarised mouldings.
Fully shrouded contacts.
Large bore 22 AWG, small bore 24-28 AWG.
Jackscrews are assembled where specifi ed.
Crimp contacts are rear insertable.
Mates with male connectors shown on pages 34-40 and 42-43.
Part numbers are for housings and the equivalent no of contacts.
Spare contacts available, see page 16.
All dimensions in mm.
TYPE
460 Large Bore, with Jackscrews* 471 Small Bore, without Jackscrews
461 Small Bore, with Jackscrews* 480 Large Bore, with Hex Jackscrews
470 Large Bore, without Jackscrews 481 Small Bore, with Hex Jackscrews
TOTAL NO. OF CONTACTS
04 to 50
Even numbers only