CC-E Series Ultra Compact, 1.5W to 25W Single and Dual DC-DC Converters Features u Compact Footprint / Low Profile u Through Hole or SMT Versions u 5V, 12V, 24V & 48V Inputs u 3.3 to 30V1 Single, 12 to 15V Dual Outputs u Output Voltage Adjustment u Input - Output Isolation u RoHS Compliant u 5 Year Warranty u Self contained u Multiple Input Voltage configurations u Open frame (no potting) Key Market Segments & Applications Specifications Model V 3.3V 5V 12/15V 12/15 (24/30)1 V 5V: 4.5-9.0V, 12V: 9-18V, 24V: 18-36V, 48V: 36-76V % 71 to 90% model dependant % 1.5-10W: 3%, 15-25W: 5% 5% V 3.15-3.6V (5) 4.75-6.0V (5) 11.4-15V 22.8 - 30V mV 20 (40 CC15; 30 CC25) 40 80 mV 40 (120 CC15; 200 CC25) 100 6002 % < 0.02%/C No preload required mV 40/120 30/120 Output current limiting with automatic recovery, shutdown CC15, 25 type No - CC1R5, 3, 6, & 10: RC terminal open, output is OFF; RC terminal to -Vin (0-0.4V), output is ON CC15 & CC25: RC terminal open, output is ON; RC terminal to +Vin, output is OFF Operating Temp.- Convection C -40 to 85C, derates linearly to 40% load from 50C to 85C Operating Temp.- Forced Air C -40C to 85C with 1m/s air full load Storage Temperature C -40C to 85C Humidity (non Condensing) 95% RH max.(maximum wet-bulb temperature: 38C) Isolation Voltage 500VAC 1 min. Input to output, input to case, output to case Isolation Resistance Input to output, input to case, output to case: 50M ohm min. (500VDC) Shock m/s2 980m/s2 (100G) 6ms (6 directions, each 3 times) Vibration (non Operating) 10 to 55Hz (sweep for 15min) 1.52mm constant, 3 directions X, Y, Z each 2 hours Safety Agency Approvals UL60950-1, CSA60950-1, EN60950-1, CE Mark Weight g CC1R5: 3.2, CC3: 4.5, CC6: 5.8, CC10:10.0, CC15: 12.5, CC25: 20.0 Size (L x W x H) in CC1R5: 0.650 x 0.654 x 0.335; CC3: 0.900 x 0.654 x 0.335; CC6: 0.900 x 0.831 x 0.335 (DIP Through Hole and SMD package) CC10: 1.400 x 0.890 x 0.335; CC15: 1.500 x 1.264 x 0.295; CC25: 1.701 x 1.768 x 0.295 (SIP Through Hole only) CC3 (SIP): 1.09 x 0.362 x 0.705 Warranty 5 years Nominal Output Voltage DC Input Efficiency Output Voltage Tolerance Output Adjustment (via trim pin) Line Regulation Load Regulation Temperature Coefficient Preload Output Ripple (typ./max.BW 50MHz) Overcurrent Protection Overvoltage Protection Remote On/ Off 1. For 24V/30V output - connnect across +Vout & -Vout and leave "common out" pin not connected 2. Based upon equal load current from both outputs 1-800-526-2324 * www.us.tdk-lambda.com/lp/ 3. For 15V output connect trim to -Vout 4. See Installation Manual for full specs, test methods of parameters & application notes 5. Not available on CC15 and CC25 models 13 CC-E Series Model Selector Output Output Current (A) Power (W) Single Outputs 3.3 3.3 3.3 3.3 3.3 3.3 5 5 5 5 5 5 5 12(15) 12(15) 12(15) 12(15) 12(15) Dual Outputs 12 (15)3 12 (15)3 12 (15)3 12 (15)3 12 (15)3 5V Input 12V Input 24V Input 48V Input 0.4 0.8 1.2 2.5 4.5 7.5 0.3 0.6 1.0 1.2 2.0 3.0 5.0 0.125(0.1) 0.25(0.2) 0.5(0.4) 0.8(0.64) 1.0(0.8) 1.5 3 6 10 15 25 1.5 3 5 6 10 15 25 1.5 3 6 10 10 CC1R5-0503SF-E CC3-0503SF-E CC6-0503SF-E CC10-0503SF-E CC1R5-0505SF-E CC3-0505SF-E CC6-0505SF-E CC10-0505SF-E CC1R5-0512SF-E CC3-0512SF-E CC6-0512SF-E CC10-0512SF-E - CC1R5-1203SF-E CC3-1203SF-E CC6-1203SF-E CC10-1203SF-E CC1R5-1205SF-E CC3-1205SF-E CC6-1205SF-E CC10-1205SF-E CC1R5-1212SF-E CC3-1212SF-E CC6-1212SF-E CC10-1212SF-E CC1R5-2403SF-E CC3-2403SF-E CC6-2403SF-E CC10-2403SF-E CC15-2403SF-E CC25-2403SF-E CC1R5-2405SF-E CC3-2405SF-E CC6-2405SF-E CC10-2405SF-E CC15-2405SF-E CC25-2405SF-E CC1R5-2412SF-E CC3-2412SF-E CC6-2412SF-E CC10-2412SF-E CC1R5-4803SF-E CC3-4803SF-E CC6-4803SF-E CC10-4803SF-E CC1R5-4805SF-E CC3-4805SF-E CC6-4805SF-E CC10-4805SF-E CC1R5-4812SF-E CC3-4812SF-E CC6-4812SF-E CC10-4812SF-E 0.06(0.05) 0.125(0.1) 0.25(0.2) 0.4(0.32) 0.45(0.36) 1.5 3 6 10 10 CC1R5-0512DF-E CC3-0512DF-E CC6-0512DF-E CC10-0512DF-E - CC1R5-1212DF-E CC3-1212DF-E CC6-1212DF-E CC10-1212DF-E CC1R5-2412DF-E CC3-2412DF-E CC6-2412DF-E CC10-2412DF-E CC1R5-4812DF-E CC3-4812DF-E CC6-4812DF-E CC10-4812DF-E Outline Drawing Outline Drawing CC10- F-E (DIP TYPE) 8.4 (8.5max.) CC10- R-E (SMD TYPE) 4.0 8.5 (8.8max.) 22.60.2 22.60.2 4.0 Output Voltage (V) t=0.3 3.5 t=0.3 35.56 6 7-0.3 0.6 1 10 9 7 Options Version F-E R-E S-E 3 4 2 5 7-0.3 0.6 1 6 7 Pinout (CC1R5, 3, 6, and 10) Description Through hole mounting (DIP pkg) Surface mount (DIP pkg) Through hole mounting (SIP pkg - CC3) Other Industrial Products PX PAQ, PAH, PAF 5.08 (3.68) 1.0 1.8 5.08 5.08 5.08 (3.68) 10.16 5 (3.68) 10.16 4 2 1.8 No.10, 11 2.7 11 Coplanarity 0.1max. 38.86 2.7 0.5 8 5.08 5.08 5.08 5.08 5.08 (3.68) 3 No.8, 9 3.5 25.4 5.08 0.5 25.4 35.56 10 - 40W 12, 24, 48V DC-DC converters 50 -700W quarter, half & full bricks Pin 1 2 3 4 5 6 7 Single Dual +Vin +Vin RC RC -Vin -Vin NC -Vout -Vout Common out TRM TRM +Vout +Vout For CC15 and 25 see Installation Manual online For Additional Information, please visit us.tdk-lambda.com/lp/products/cc-series.htm 1-800-526-2324 * www.us.tdk-lambda.com/lp/ 14 Revision A7: Nov 2011