FCI/Berg Bergcon Connector Systems 65039/65043 Series Mini-Latch PV Housing Bergcon System Crimp-To-Wire MaxiPV Receptacles For use with dual metal Mini-PV contacts and crimp-to-wire pins. Allows simultaneous connections of Mini-PV terminated conductors on 0.100" 0.100" or 0.100" 0.200" double row, to accommodate Mini-PV receptacles or crimp-to-wire male pins. Accepts crimp-to-wire Mini-PV range AWG 22-36, and crimp-to wire pin AWG 22-32. Made of modified polyphenylene oxide rated UL 94V-1, color Black. Insulation Resistance: 1 105 M1/2 minimum. Temperature Range: 40C to +105C. Withstanding Voltage: 1000 Vrms at sea level. Latching Force: 6.5 lbs. minimum per position. Optional polarization plug. Two-piece design provides low resistance, high pressure, gas-light connection. Mate to 0.025" round or square pins. 0.125" spacing. Contact has brass body, beryllium copper spring and gold finish. Current Rating: 5 A continuous depending on wire size. Type 46227 accepts AWG 18 or 20. Type 46237 accepts AWG 22, 24, or 26. Resistance: 4 m1/2 maximum. Temperature Range: 65C to +125C. Come with standard spring force, recommended for Maxi-Latch housing 12 through 56 positions. UL recognized, CSA certified. 518-0120. 46227-000. 1-99 ......................................................................................EACH 100-999......................................................................................................................EACH 518-0121. 46237-000. 1-99 ......................................................................................EACH 100-999......................................................................................................................EACH Single Row, 0.100" Centers EACH Stock No. Mfr.Os Type No. of Pos. Dim. A Inches 1-99 100-499 500-999 518-0150 518-0151 518-0152 518-0153 518-0154 518-0155 518-0156 518-0157 65039-035 65039-034 65039-033 65039-032 65039-031 65039-030 65039-029 65039-027 2 3 4 5 6 7 8 10 0.200 0.300 0.400 0.500 0.600 0.700 0.800 1.000 .32 .36 .39 .45 .52 .52 .57 .66 .29 .33 .35 .41 .47 .47 .51 .59 .24 .27 .29 .34 .39 .39 .43 .49 0.200 0.300 0.400 0.500 0.600 0.700 0.800 1.000 2.000 .54 .52 .63 .88 .48 1.25 1.09 1.54 2.09 .49 .47 .57 .80 .43 1.12 .98 1.39 1.88 .41 .39 .48 .66 .36 .94 .82 1.16 1.56 .44 .39 .44 .39 Daisy Chain Jumpers Double Row, 0.100 0.100" Centers 518-0170 518-0171 518-0172 518-0173 518-0174 518-0175 518-0176 518-0177 518-0178 65043-035 65043-034 65043-033 65043-032 65043-031 65043-030 65043-029 65043-027 65043-017 4 6 8 10 12 14 16 20 40 Bergcon Crimp-To-Wire MiniPV Receptacles c MAXI-PV Contacts Provide Constant High Electrical and Mechanical Reliability After Repeated Cycles c Board As Shown Not Included With Jumpers Eliminate wire measuring, stripping, soldering or hand-tool terminating. Maxi-PV contacts provide constant high electrical and mechanical reliability after repeated cycles. Contact has brass body and beryllium copper spring. Contact Area: 1 m (40 inch) gold over nickel. Reminder: Gold flash. Current Rating: 2.5 A. Resistance: 4 m1/2 maximum. Insertion Force (Max.): 4,30 N (430 gf) with withdrawal force (min.) 0,75 N (75 gf). Temperature Range: 65C to +105C. AWG 28 stranded copper wire conductor with PVC insulation. PVC shrinkable tubing. Packaging: 250 contacts per reel. 518-0001. 47254-000 ................................................................................................................................. PER REEL 230.35 Bergcon System Mini Jump Jumpers c Mini-PV Receptacle Shown with Latch Housing Mate to 0.019 inch and 0.025 inch round or square pins. Dual-metal contact design provides constant retention force after repeated cycles. These female receptacles have beryllium-copper spring and brass body. Offer superior electrical and mechanical characteristics. Standard spring force is recommended for use in Mini-Latch housings 40-72 positions. High spring force for Mini-Latch housings 10-50 positions. Stock No. Mfr.Os Type AWG Spring Force Plating* 518-0129 518-0130 518-0003 518-9997 518-0132 518-0131 518-0134 518-0135 518-0133 47716-000 48266-000 47750-000 47712-000 48234-000 48235-000 47747-000 47748-000 48252-000 18, 20 18, 20 22, 24, 26 22, 24, 26 22, 24, 26 22, 24, 26 22, 24, 26 28, 30, 32 28, 30, 32 High Standard Ultra-High High High Standard Standard High Standard 3 1 3 4 1 1 3 3 2 EACH 1-99 100-499 500-999 .16 .33 .16 .39 .32 .32 .16 .16 .32 .14 .29 .14 .35 .29 .29 .14 .14 .29 .12 .24 .12 .29 .24 .24 .12 .12 .24 *1=30 inch gold over nickel with gold flash; 2=15 inch gold over nickel with gold flash; 3=100 inch tin-lead; 4= 40 inch gold over nickel with gold flash. Male Crimp-To-Wire Pins Stock No. Mfr.Os Type Plating 518-0005 518-0009 65474-002 65474-010 100 inch tin-lead over nickel 30 inch gold over nickel EACH 1-99 100-499 500-999 .15 .18 .13 .16 .11 .14 Low Profile Jumper System c Pins Shown Are Not Included with Jumper 68786 Series. Economy jumper system applicable for bussing, programming, and switch replacement. Low profile permits high-density packaging. Dual beam contact. Offer 0.100 inch spacing and two positions standard. Housed in thermoplastic polyester rated UL94V-0, color black. Insulation Resistance: 50,000 M1/2 minimum. Temperature Range: 55C to +120C. Withstanding Voltage: 750 Vrms. Contact Current Rating: 2.5 A maximum. Resistance: 15 m1/2 maximum. Mates with 0.025 inch square pin. Contact made of phosphor-bronze. Type 68786-202 is plated 30 inch gold; 68786-302, 100 inch tin/lead. c Crimp-to-Wire Pin Shown Installed in Mini-Latch Housing Crimp-to-wire pin fits in mini-latch housings. Mates to MiniPV receptacles. 0.100" minimum spacing. Brass contact and gold finish. Current Rating: 3 A continuous depending on wire size. Resistance: 5 m1/2 maximum. Temperature Range: 65C to +125C. UL recognized. 518-0100. 48115-000. For 28-32 AWG. 1-99 ................................EACH 100-999 ...........................................................................................EACH 518-0101. 48116-000. For 22-26 AWG. 1-99 ................................EACH 100-999 ...........................................................................................EACH 518-0102. 48117-000. For 18-20 AWG. 1-99 ................................EACH 100-999 ...........................................................................................EACH 65474 Series. Jumpers feature high density packaging, stackable on 0.100" spacing. Offer single row, two positions per row. For bussing, programming and switch replacement. Replace conventional printed circuit board switches. Virtually eliminates accidental de-programming. Mate with 0.025" square and round pins. Dual metal PV contact design provide excellent retention after repeated cycling. Available in glass-filled thermoplastic polyester housing, color blue. Gold flash over nickel finish. Insulation Resistance: 1 105 M1/2 minimum. Temperature Range: 65C to +125C. Contact has a brass or cupro nickel body and a beryllium copper spring. Rated at 3 A maximum, with initial resistance of 11 m1/2 maximum, 15 m1/2 maximum after tests. UL recognized, CSA certified. .58 .52 .50 .45 .58 .52 518-0021. 68786-202. 1-99 ................................................................................................................................EACH 100-999................................................................................................................................................................ EACH 518-0022. 68786-302. 1-99 ................................................................................................................................EACH 100-999................................................................................................................................................................ EACH .12 .11 .11 .10 Bergcon System Polarization Plug Handtools Lightweight, rugged hand tools have ratchet-action handle that assures complete crimp cycle. For application on crimp-to-wire PV receptacles and pins. 518-0050. HT-73. Mini PV, 18-20 AWG ...............................EACH 518-0051. HT-80. PV Removal Tool .....................................EACH 518-0052. HT-95. Mini PV, 22-32 AWG ...............................EACH 518-0054. HT-49. Maxi PV, 18-20 AWG...............................EACH 518-0055. HT-48. Mini PV, 22-26 AWG ...............................EACH 518-0056. HT-102. Pin Contacts, 22-32 AWG......................EACH 548.08 1.29 548.08 575.28 575.28 535.84 Polarization plugs for mini and maxi latch housings are made of nylon and come in white. Temperature Range: 40C to +105 C. UL recognized. 518-0025. 65307-001. 1-99 ................................................................................................................................EACH 100-999................................................................................................................................................................ EACH Turn To Section 1 For Allied Office Addresses and Local Phone Numbers .12 .11 ALLIED c 471 8