PRELIMINARY DATA SHEET NPN SILICON GERMANIUM RF TRANSISTOR NESG250134 NPN SiGe RF TRANSISTOR FOR MEDIUM OUTPUT POWER AMPLIFICATION (800 mW) 3-PIN POWER MINIMOLD (34 PACKAGE) FEATURES * This product is suitable for medium output power (800 mW) amplification PO (1dB) = 29 dBm TYP. @ VCE = 3.6 V, Pin = 15 dBm, f = 460 MHz PO (1dB) = 29 dBm TYP. @ VCE = 3.6 V, Pin = 20 dBm, f = 900 MHz * MSG (Maximum Stable Gain) = 23 dB TYP., @ VCE = 3.6 V, Ic = 100 mA, f = 460 MHz * Using UHS2-HV process (SiGe technology), VCBO (ABSOLUTE MAXIMUM RATINGS) = 20 V * 3-pin power minimold (34 package) ORDERING INFORMATION Part Number Quantity Supplying Form NESG250134 25 pcs (Non reel) * 12 mm wide embossed taping NESG250134-T1 1 kpcs/reel * Pin 2 (Emitter) face the perforation side of the tape Remark To order evaluation samples, contact your nearby sales office. Unit sample quantity is 25 pcs. ABSOLUTE MAXIMUM RATINGS (TA = +25C) Parameter Symbol Ratings Unit Collector to Base Voltage VCBO 20 V Collector to Emitter Voltage VCEO 9.2 V Emitter to Base Voltage VEBO 2.8 V IC 500 mA 1.5 W Collector Current Total Power Dissipation Ptot Note Junction Temperature Tj 150 C Storage Temperature Tstg -65 to +150 C Note Mounted on 3.8 x 9.0 cm, t = 0.8 mm glass epoxy PCB Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PU10422EJ01V0DS (1st edition) Date Published January 2004 CP(K) Printed in Japan NEC Compound Semiconductor Devices 2003, 2004 NESG250134 THERMAL RESISTANCE (TA = +25C) Parameter Termal Resistance from Junction to Ambient Symbol Ratings Unit Rthj-a 80 C/W Note Note Mounted on 3.8 x 9.0 cm, t = 0.8 mm glass epoxy PCB RECOMMENDED OPERATING RANGE (TA = +25C) Parameter Collector to Emitter Voltage Collector Current Input Power Note Symbol MIN. TYP. MAX. Unit VCE - 3.6 4.5 V IC - 400 500 mA Pin - 12 17 dBm Note Input power under conditions of VCE 4.5 V, f = 460 MHz 2 Preliminary Data Sheet PU10422EJ01V0DS NESG250134 ELECTRICAL CHARACTERISTICS (TA = +25C) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit DC Characteristics Collector Cut-off Current ICBO VCB = 5 V, IE = 0 mA - - 1 A Emitter Cut-off Current IEBO VEB = 0.5 V, IC = 0 mA - - 1 A VCE = 3 V, IC = 100 mA 80 120 180 - VCE = 3.6 V, IC = 100 mA, f = 460 MHz - 10 - GHz VCE = 3.6 V, IC = 100 mA, f = 460 MHz - 19 - dB VCE = 3.6 V, IC = 100 mA, f = 460 MHz - 23 - dB VCE = 3.6 V, IC (set) = 30 mA (RF OFF), 16 19 - dB - 16 - dB 27 29 - dBm - 29 - dBm - 60 - % - 60 - % DC Current Gain hFE Note 1 RF Characteristics Gain Bandwidth Product fT S21e 2 Insertion Power Gain Maximum Satble Gain MSG Linner gain (1) Note 2 GL f = 460 MHz, Pin = 0 dBm Linner gain (2) GL VCE = 3.6 V, IC (set) = 30 mA (RF OFF), f = 900 MHz, Pin = 0 dBm Output Power (1) Po VCE = 3.6 V, IC (set) = 30 mA (RF OFF), f = 460 MHz, Pin = 15 dBm Output Power (2) Po VCE = 3.6 V, IC (set) = 30 mA (RF OFF), f = 900 MHz, Pin = 20 dBm c Collector Efficiency (1) VCE = 3.6 V, IC (set) = 30 mA (RF OFF), f = 460 MHz, Pin = 15 dBm c Collector Efficiency (2) VCE = 3.6 V, IC (set) = 30 mA (RF OFF), f = 900 MHz, Pin = 20 dBm Notes 1. Pulse measurement: PW 350 s, Duty Cycle 2% 2. MSG = S21 S12 hFE CLASSIFICATION Rank FB Marking SN hFE Value 80 to 180 Preliminary Data Sheet PU10422EJ01V0DS 3 NESG250134 PACKAGE DIMENSIONS 3-PIN POWER MINIMOLD (34 PACKAGE) (UNIT: mm) 4.50.1 1.50.1 0.8 MIN. 2 1 3 0.420.06 4.00.25 2.50.1 1.60.2 0.420.06 0.470.06 1.5 3.0 PIN CONNECTIONS 1. Collector 2. Emitter 3. Base 4 Preliminary Data Sheet PU10422EJ01V0DS 0.41+0.03 -0.06 NESG250134 * The information in this document is current as of January, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 Preliminary Data Sheet PU10422EJ01V0DS 5 NESG250134 For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) 5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-01 FAX: +49-211-6503-487 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0310