MURS340S, MURS360S
www.vishay.com Vishay General Semiconductor
Revision: 22-Mar-18 1Document Number: 89110
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Ultrafast Plastic Rectifier
FEATURES
• Glass passivated pellet chip junction
• Ideal for automated placement
• Ultrafast reverse recovery time
• Low switching losses, high efficiency
• Meets MSL level 1, per J-STD-020,
LF maximum peak of 260 °C
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency rectification and freewheeling
application in switching mode converters and inverters for
consumer, computer and telecommunication.
MECHANICAL DATA
Case: SMB (DO-214AA)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3_X - RoHS-compliant, and AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B,.....)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 and HE3 suffix meet JESD 201 class 2 whisker test
Polarity: color band denotes cathode end
Notes
(1) Units mounted on PCB with 8 mm x 8 mm, 1 oz. copper pad areas (fig. 1)
(2) Free air, mounted on recommended copper pad area (fig. 2)
PRIMARY CHARACTERISTICS
IF(AV) 3.0 A
VRRM 400 V, 600 V
IFSM 35 A
trr 50 ns
VF at IF = 3.0 A 1.20 V
TJ max. 175 °C
Package SMB (DO-214AA)
Circuit configuration Single
SMB (DO-214AA)
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL MURS340S MURS360S UNIT
Device marking codes 3GS 3JS
Maximum repetitive peak reverse voltage VRRM 400 600 V
Maximum average forward rectified current TM = 130 °C IF(AV) (1) 3.0 A
TA = 25 °C IF(AV) (2) 1.5
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load IFSM 35 A
Operating junction and storage temperature range TJ, TSTG -65 to +175 °C
MURS340S, MURS360S
www.vishay.com Vishay General Semiconductor
Revision: 22-Mar-18 2Document Number: 89110
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: pulse width 40 ms
Notes
(1) Units mounted on PCB with 8 mm x 8 mm, 1 oz. copper pad areas. Thermal resistance RJM - junction to mount
(2) Free air, mounted on recommended copper pad area. Thermal resistance RJA - junction to ambient
Note
(1) AEC-Q101 qualified
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL MURS340S MURS360S UNIT
Maximum instantaneous
forward voltage IF = 3.0 A TJ = 25 °C VF (1) 1.45 V
TJ = 150 °C 1.20
Maximum instantaneous
reverse current Rated VR
TJ = 25 °C IR (2) 5.0 μA
TJ = 150 °C 150
Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns
Maximum reverse recovery time IF = 1.0 A, dI/dt = 50 A/μs,
VR = 30 V, Irr = 10 % IRM trr 75 ns
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL MURS340S MURS360S UNIT
Typical thermal resistance RJM (1) 12 °C/W
RJA (2) 120
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
MURS360S-E3/52T 0.093 52T 750 7" diameter plastic tape and reel
MURS360S-E3/5BT 0.093 5BT 3200 13" diameter plastic tape and reel
MURS360SHE3_A/H (1) 0.093 H 750 7" diameter plastic tape and reel
MURS360SHE3_A/I (1) 0.093 I 3200 13" diameter plastic tape and reel
MURS340S, MURS360S
www.vishay.com Vishay General Semiconductor
Revision: 22-Mar-18 3Document Number: 89110
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Forward Current Derating Curve
Fig. 3 - Forward Power Loss Characteristics
Fig. 4 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Reverse Characteristics
Fig. 6 - Typical Junction Capacitance
3.0
2.0
1.0
0
0 25 50 75 100 125 150 175
Average Forward Rectified Current (A)
TM - Mount Temperature (°C)
Units Mounted on P.C.B. with 8 mm x 8 mm,
1 oz. Copper Pad Areas.
T
M
Measured at Mount of Terminal
1.6
0
0 25 50 75 100 125 150 175
Average Forward Current (A)
T
A
- Ambient Temperature (°C)
1.4
1.2
1.0
0.8
0.6
0.4
0.2 Mounted on P.C.B. with
Recommended Copper Pad Areas
0 0.5 1.0 1.5 2.0 3.5
4.4
2.8
1.2
0.8
0.4
0
Average Power Loss (W)
Average Forward Current (A)
D = 0.1
D = 0.2
D = 0.3
D = 0.8
D = 1.0
D = t
p
/T t
p
T
D = 0.5
4.0
3.6
3.2
2.4
2.0
1.6
2.5 3.0
100
10
1
0 0.4 0.8 1.2 1.6 2.0
0.1
0.01
T
A
= 175 °C
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
T
A
= 150 °C
T
A
= 125 °C
T
A
= 100 °C
T
A
= 25 °C
1000
100
10
10 20 40 60 80 100
1
0.1
0.01
T
A
= 100 °C
T
A
= 175 °C
T
A
= 25 °C
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (µA)
30 50 70 90
T
A
= 150 °C
T
A
= 125 °C
100
10
1
0.1 10 100
Reverse Voltage (V)
Junction Capacitance (pF)
1
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
MURS340S, MURS360S
www.vishay.com Vishay General Semiconductor
Revision: 22-Mar-18 4Document Number: 89110
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Cathode Band
SMB (DO-214AA)
0.086 (2.20)
0.077 (1.95)
0.155 (3.94)
0.130 (3.30)
0.180 (4.57)
0.160 (4.06)
0.012 (0.305)
0.006 (0.152)
0.008 (0.2)
0 (0)
0.220 (5.59)
0.205 (5.21)
0.060 (1.52)
0.030 (0.76)
0.096 (2.44)
0.084 (2.13)
Mounting Pad Layout
0.086 (2.18) MIN.
0.060 (1.52) MIN.
0.085 (2.159) MAX.
0.220 (5.59) REF.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2019 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
