MOS FET Relays G3VM-21GR1 MOS FET Relay with Low Output Capacitance and ON Resistance (CxR = 5pF* ) in a 20-V Load Voltage, SOP Package. * ON resistance of 1 (typical) suppresses output signal attenuation. * Leakage current of 1.0 nA max. (0.2 nA typ.) when relay is open. * RoHS Compliant. Application Examples * * * * Semiconductor inspection tools Measurement devices Broadband systems Data loggers Note: The actual product is marked differently from the image shown here. List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 20 VAC Model Number per stick G3VM-21GR1 100 G3VM-21GR1(TR) --- Number per tape 2,500 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-21GR1 4.40.25 3.90.2 2.1 max. 0.15 Note: The actual product is marked differently 0.40.1 from the image shown here. 0.60.3 0.10.1 7.00.4 2.540.25 Weight: 0.1 g Terminal Arrangement/Internal Connections (Top View) G3VM-21GR1 4 3 1 2 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-21GR1 6 to 6.3 1.2 0.8 2.54 MOS FET Relays G3VM-21GR1 93 Absolute Maximum Ratings (Ta = 25C) Item Input Symbol Rating Unit Measurement conditions LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 s pulses, 100 pps LED forward current reduction rate IF/C -0.5 mA/C Ta 25C LED reverse voltage VR 5 V Connection temperature Tj 125 C VOFF 20 V IO 300 mA Output Load voltage (AC peak/DC) Continuous load current ON current reduction rate ION/C -3.0 Connection temperature Tj Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Ta 25C mA/C 125 C Dielectric strength between input and VI-O output (See note 1.) 1,500 Vrms AC for 1 min Operating temperature Ta -20 to +85 C With no icing or condensation Storage temperature Tstg -55 to +125 C With no icing or condensation Soldering temperature (10 s) --- 260 C 10 s Electrical Characteristics (Ta = 25C) Item Input Minimum Symbol Typical Maximum Measurement conditions Unit LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 A VR = 5 V Capacity between terminals CT --- 15 --- pF V = 0, f = 1 MHz 2. Turn-ON and Turn-OFF Times IF IFT --- --- 4 mA IO = 100 mA RON --- 1 1.5 IF = 5 mA, IO = 300 mA, t < 1 s Current leakage when the relay is open ILEAK --- 0.2 1.0 nA VOFF = 20 V Ta = 50C Capacity between terminals COFF --- 5.0 12.0 pF V = 0, f = 100 MHz, t<1s Trigger LED forward current Output Maximum resistance with output ON Note: 1 4 2 3 RL VDD VOUT IF Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V Insulation resistance RI-O 1,000 --- --- M VI-O = 500 VDC, RoH 60% Turn-ON time tON --- 0.09 0.5 ms Turn-OFF time tOFF --- 0.2 0.5 ms IF = 10 mA, RL = 200 , VDD = 20 V (See note 2.) Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD --- --- 20 V Operating LED forward current IF 7 --- 30 mA Continuous load current (AC peak/DC) IO --- --- 300 mA Operating temperature 25 --- 60 C 94 Ta MOS FET Relays G3VM-21GR1 VOUT 10% t ON 90% t OFF Engineering Data LED forward current vs. Ambient temperature IF - Ta Continuous load current vs. Ambient temperature IO - Ta 80 60 40 20 0 20 40 60 80 100 400 300 200 100 0 -20 120 0 Continuous load current vs. On-state voltage IO - VON On-state resistance RON () 80 Ta = 25 C I F = 5 mA 300 200 100 0 -100 -200 -300 -0.5 0 I O = 300 mA I F = 5 mA t < 1s 2 1 0.5 1 0 -20 Turn ON, Turn OFF time tON, tOFF (S) Ta = 25 VDD =10 V, RL = 200 300 t OFF 100 t ON 30 10 30 1 0.5 0.3 0.8 0 20 40 60 80 100 100 LED forward current IF (mA) 300 t OFF 200 150 100 1.4 1.6 1.8 I O = 100 mA t < 1s 4 3 2 1 0 -20 0 20 40 60 80 100 Current leakage vs. Load voltage I LEAK - VOFF VDD = 10 V, RL = 200 I F = 10 mA 250 1.2 Ambient temperature Ta () 400 350 1 5 Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - Ta 1000 3 3 Ambient temperature Ta () Turn ON, Turn OFF time vs. LED forward current tON, tOFF - IF 1 5 Trigger LED forward current vs. Ambient temperature IFT - Ta 3 On-state voltage VON (V) 10 10 LED forward voltage VF (V) -400 -500 -1 30 0.1 0.6 100 Current leakage ILEAK (nA) Continuous load current IO (mA) 60 Ta = 25 C 50 On-state resistance vs. Ambient temperature RON - Ta 500 Turn ON, Turn OFF time tON, tOFF (S) 40 100 Ambient temperature Ta Ambient temperature Ta () 400 20 Trigger LED forward current I F T (mA) 0 -20 500 LED forward current I F (mA) Continuous load current I O (mA) LED forward current IF (mA) 100 LED forward current vs. LED forward voltage IF - VF t ON 15 Ta = 25 C 10 5 50 0 -20 0 20 40 60 80 100 0 Ambient temperature Ta ( 5 10 15 20 Load voltage VOFF(v) Output terminal capacitance COFF/COFF(ov) vs. Load voltage COFFVOFF 1 Output terminal capacitance COFF/COFF(ov) Ta = 25 0.8 0.6 0.4 0.2 0 10 20 30 Load voltage VOFF(v) MOS FET Relays G3VM-21GR1 95 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X302-E-1 MOS FET Relays 12/10 Specifications subject to change without notice G3VM-21GR1 Printed in USA