SPECIFICATION CONTROL DRAWING 55/0114 Date TITLE WIRE, RADIATION-CR0SSLINKED, MODIFIED ETFE INSULATED, 2-28-05 LIGHTWEIGHT, OUTER SPACE, 600 VOLT This specification sheet forms a part of the latest issue of Raychem Specification 55/. CONDUCTOR - Revision E JACKET - LOW OUTGASSING, RADIATION-CROSSLINKED, MODIFIED ETFE SILVER-COATED HIGH STRENGTH COPPER ALLOY TABLE I. CONSTRUCTION DETAILS PART NUMBER 1/ 55/0114-30-* 55/0114-28-* 55/0114-26-* 55/0114-24-* 55/0114-22-* 55/0114-20-* 55/0114-18-* 55/0114-16-* WIRE CONDUCTOR SIZE STRANDING (AWG) (number x AWG) 30 28 26 24 22 20 18 16 7 7 19 19 19 19 19 19 x x x x x x x x 38 36 38 36 34 32 30 29 FINISHED WIRE DIAMETER OF STRANDED CONDUCTOR (in.) MINIMUM .011 .014 .018 .023 .029 .037 .046 .052 MAXIMUM .012 .016 .020 .025 .031 .039 .050 .057 MAXIMUM RESISTANCE AT 20C (ohms /1000 ft.) 117.4 74.4 44.8 28.4 17.5 10.7 6.8 5.3 DIAMETER (in.) .024 .027 .032 .037 .043 .050 .060 .068 MAXIMUM WEIGHT (lb/1000 ft) .002 .002 .002 .002 .002 .002 .002 .002 .66 .91 1.4 2.0 2.9 4.4 6.5 8.3 TABLE II. PERFORMANCE DETAILS BEND TESTING PART NUMBER 1/ WEIGHT (lb) ( 3%) MANDREL DIAMETER (inch) ( 3%) CROSSLINK VERIFICATION 55/0114-30-* 55/0114-28-* 55/0114-26-* 55/0114-24-* 55/0114-22-* 55/0114-20-* 55/0114-18-* 55/0114-16-* CROSSLINK VERIFICATION .125 .125 .125 .250 .375 .500 .500 .750 .250 .250 .375 .375 .500 .500 .500 .750 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level CROSSLINK VERIFICATION: 300 3C for 1 hour COLOR: White preferred IDENTIFICATION AND COLOR STRIPING DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight INSULATION ELONGATION: 50% (minimum) INSULATION FLAWS: Spark Test, 3.0 kV (rms) Impulse Dielectric Test, 8.0 kV (peak) INSULATION THICKNESS: .005 in. (minimum) RADIATION RESISTANCE: 500 megarads SHRINKAGE: 230 3C for 1 hour, 0.125 in. (maximum) in 12 in. VACUUM STABILITY: Total Mass Loss (TML), 1.0% (maximum) Volitale Condensable Material, 0.1% (maximum) VOLTAGE WITHSTAND TEST (Post Environmental): 2500 volts (rms), 60 Hz, 5 minutes PART NUMBER: The "*" in the part numbers above shall be replaced by color code designators. 1/ Example: AWG 20, white: 55/0114-20-9 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL. Page 1 of 1 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. R Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297