E
TITLE WIRE, RADIATION-CR0SSLINKED, MODIFIED ETFE INSULATED,
LIGHTWEIGHT, OUTER SPACE, 600 VOLT
SPECIFICATION CONTROL DRAWING 55/0114
Date Revision
This specification sheet forms a part of the latest issue of Raychem Specification 55/.
JACKET - LOW OUTGASSING,
RADIATION-CROSSLINKED,
MODIFIED ETFE
CONDUCTOR - SILVER-COATED HIGH
STRENGTH COPPER ALLOY
.66
.91
1.4
2.0
2.9
4.4
6.5
8.3
55/0114-30-*
55/0114-28-*
55/0114-26-*
55/0114-24-*
55/0114-22-*
55/0114-20-*
55/0114-18-*
55/0114-16-*
PART NUMBER
1/
30
28
26
24
22
20
18
16
7 x 38
7 x 36
19 x 38
19 x 36
19 x 34
19 x 32
19 x 30
19 x 29
MAXIMUM
WEIGHT
(lb/1000 ft)
.024 ± .002
.027 ± .002
.032 ± .002
.037 ± .002
.043 ± .002
.050 ± .002
.060 ± .002
.068 ± .002
DIAMETER
(in.)
MAXIMUM
RESISTANCE
AT 20°C
(ohms /1000 ft.)
DIAMETER OF
STRANDED
CONDUCTOR
(in.)
.012
.016
.020
.025
.031
.039
.050
.057
.011
.014
.018
.023
.029
.037
.046
.052
117.4
74.4
44.8
28.4
17.5
10.7
6.8
5.3
FINISHED WIRE
WIRE
SIZE
(AWG)
CONDUCTOR
STRANDING
(number x AWG) MINIMUM MAXIMUM
TABLE I. CONSTRUCTION DETAILS
CROSSLINK VERIFICATION
WEIGHT
(lb) (± 3%)
.250
.250
.375
.375
.500
.500
.500
.750
CROSSLINK VERIFICATION
.125
.125
.125
.250
.375
.500
.500
.750
MANDREL DIAMETER
(inch) (± 3%)
BEND TESTING
TABLE II. PERFORMANCE DETAILS
55/0114-30-*
55/0114-28-*
55/0114-26-*
55/0114-24-*
55/0114-22-*
55/0114-20-*
55/0114-18-*
55/0114-16-*
PART NUMBER
1/
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour
COLOR: White preferred
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
INSULATION ELONGATION: 50% (minimum)
INSULATION FLAWS:
Spark Test, 3.0 kV (rms)
Impulse Dielectric Test, 8.0 kV (peak)
INSULATION THICKNESS: .005 in. (minimum)
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
2-28-05
RADIATION RESISTANCE: 500 megarads
SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 in. (maximum) in 12 in.
VACUUM STABILITY:
Total Mass Loss (TML), 1.0% (maximum)
Volitale Condensable Material, 0.1% (maximum)
VOLTAGE WITHSTAND TEST (Post Environmental):
2500 volts (rms), 60 Hz, 5 minutes
PART NUMBER:
The "*" in the part numbers above shall be replaced by color
code designators.
1/ Example: AWG 20, white: 55/0114-20-9
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
Page 1 of 1
R Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES
AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL
REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Review
