8T SERIES Low Profile Bayonet Connectors MIL-DTL-38999 Series II 8T Series | Low Profile Bayonnet Connectors Presentation 38999 bayonet circular connector for more compacity The design and performances of the 8T connectors meet the most severe requirements set for applications in military and civil aerospace. With the increasing requirement for Space, Weight and Power (SWaP) reduction, SOURIAU has more than doubled its 8T range. It features: * Lower profile design: Lightweight, space saving (30% shorter compared to 8LT Series) * High reliability: EMI shielding, excellent shock vibration and fluid resistance, QPL approuved * A high contact density: From 1 to 128 contacts * A wide range: 11 different shells available, 43 layouts available from size 8 to 24 Contents Overview Common Section Typical applications........................................... 6 Features & Benefits........................................... 7 A large offer ...................................................... 8 Main characteristics .......................................... 9 A versatile range available................................ 9 A universal product platform............................. 10 Contact layouts ................................................. 13 Contacts / Filler plugs....................................... 30 Tooling / Wiring instruction............................... 31 Gaskets.............................................................. 33 Orientations....................................................... 33 Dummy receptacles........................................... 33 Backshells assembly.......................................... 34 Coordinates for PC tail contacts........................ 36 Cross reference list............................................ 45 Standard Series Technical features.............................................. 16 Ordering information ....................................... 17 Dimensions ....................................................... 19 Aluminum backshells......................................... 24 Aluminum protective caps ................................ 27 Range Extension Box mount interconnect solutions .................... 48 Rack and panel.................................................. 48 microComp(R) Series........................................... 49 Double flange ................................................... 49 Integrated clinch nut or helicoils....................... 50 PC tail contacts without shoulder...................... 50 3 8T SERIES (c) 2019 SOURIAU - SOURIAU is a registered trademark 8T Series Overview Typical applications ................................................................................................. 6 Features & Benefits ................................................................................................. 7 A large offer ............................................................................................................. 8 Main characteristics ................................................................................................. 9 A versatile range available ...................................................................................... 9 A universal product platform ................................................................................... 10 Worldwide sales network ........................................................................................ 10 Contact layouts ........................................................................................................ 11 Contact layouts (matrix) ........................................................................................... 13 8T Series | Overview (c) Gennadiy Poznyakov / Fotolia Missiles and Weapon Systems (c) JPS / Fotolia Civil and Military Aerospace Medical Instrumentation (c) Aleksey Stemmer / Fotolia Communication Equipment Marine Equipment 6 (c) Dougg / Fotolia (c) Dell / Fotolia (c) Mikhail / Shutterstock Typical applications Armored Carrier and Tanks 8T Series | Overview Features & Benefits MIL-DTL-38999 Qualified QPL 38 qualified layouts. High reliability: EMI shielding, excellent shock vibration and fluid resistance. Fast and secure mating QUICK MATING Bayonet quick coupling system. Audible, sensitive and visible coupling. Space and weight saving LOW PROFILE Lower profile connector design: integrated backshell and short grommet versions. 30% shorter compared to 38999 Series I. Versatility LARGE OFFER 11 different shells, 43 layouts available from size 8 to 24. High contact density: from 1 to 128 contacts. Crimp contacts with rear release and a retainer metallic clip. Environment friendly RoHS RoHS black zinc nickel plating available. RoHS nickel plating available. 7 8T Series | Overview A large offer PLUGS Plug with grounding ring 8T5 MS27484T RECEPTACLES Plug without grounding ring 8T6 MS27473T Square flange receptacle front mounting 8T0 MS27472T Square flange receptacle rear mounting 8T3 MS27497T In line receptacle 8T1 Jam nut receptacle 8T15 C Tail P les receptac available 8T16 8T4 MS27499E 8T10 8T2 MS27508E 8T7 MS27474T ACCESSORIES Backshells 6 styles of backshells, Straight or right angle, 4 platings available Please see page 24. 8 Metalic caps Caps for plug or receptacle, Cord with eyelet or ring 2 platings available Please see page 27. 8T Series | Overview Main characteristics Box Space Saving Solutions 0% 3 Shorter 8T 38999 Series ll 8LT 38999 Series l Example: 8T5 Versatility Square flange rear mounting, Square flange front mounting, Integrated backshell, Jam nut receptacle Example: 8LT5 Shell size comparison 8T Series shorter for all shell types compared to 8LT Series A versatile range available FROM YOUR NEED... Short grommet Receptacle Integrated backshell Receptacle With accessory threads Plug Receptacle Plug Square flange + Rear mounting Square flange + Front mounting Square flange + Front mounting With grounding ring Without grounding ring Square flange + Front mounting Square flange + Rear mounting In line Jam nut With grounding ring Without grounding ring 8T2 8T4 8T10 8T15 8T16 8T0 8T3 8T1 8T7 8T5 8T6 ...TO OUR SOLUTION! 9 8T Series | Overview A universal product platform 38999 Series I 38999 Series III MIL-DTL-38999 MIL-DTL-38999 8LT Series 8D Series . High density MIL-spec circular . Scoop proof . Bayonet coupling . Mounting: screws or jam nut . Shell: Aluminum alloy . Plating: Cadmium or nickel . QPL approved . Numerous layouts . High density MIL-spec circular . Scoop proof, fast screw coupling . Composite light-weight version . Hermetic version . QPL approved . Quadrax and ELIO(R) version . Specific design: clinch nuts, high power, double flange, ... VG96912 & JN1003 8ST Series . High density . Lightweight version of Series I . Scoop proof, bayonet coupling . Mounting: screws or jam nut . Shell: Aluminum alloy . Plating: Cadmium or nickel . VG 96912 German specification . JN 1003 Typhoon specification Please consult our "8LT Series MIL-DTL-38999 Series I" online catalog on: Please consult our "8D Series MIL-DTL-38999 Series III / EN3645" online catalog on: Please consult our "8ST Series VG96912 / JN1003" online catalog on: www.souriau.com www.souriau.com www.souriau.com Worldwide sales network SOURIAU-SUNBANK is recognized as one of the top international manufacturers of connectors for harsh environment and is continuously strengthening its leading position through its solid structure as an international group. Today the SOURIAUSUNBANK group has a strong worldwide global presence on 4 continents. Our international presence is reinforced by franchised and value added distributors in many countries. We also rely upon an extensive network of distributors and resellers worldwide. This coverage, together with a strong commitment towards service, ensures rapid responses to the specific needs of our customers. 10 Operations and Sales Offices Value Added Distributors and Franchised 8T Series | Overview Contact layouts 08 35 10 05* 98 35 98 Contact #22D 99 Contact #20 Contact #16 6#22D 3#20 5#20 13#22D 6#20 7#20 Service M Service I Service I Service M Service I Service I Contact #12 12 03 04* 08** 3#16 4#16 8#20 Service I Service I 26* 35 98 22#22D 10#20 Service I 6#22D 2#12 Service M Service M Service I 15* 18* 19* 35 97* 14#20 1#16 Service I 18#20 19#20 37#22D Service I Service I Service M 08* 26* 35 99 2#16 21#20 Service I 14 05* 5#16 Service II 8#20 4#16 Service I 16 06 6#12 or 6#12 Coax Service I 8#16 26#20 55#22D Service II Service I Service M * Layout not available on 8T2 & 8T4 (short grommet). On demand only, please consult us. ** Layout not available on 8T2 & 8T4 (short grommet) / Layout available on other types (long grommet) but only with male insert. For female version or short grommet, please consult us. 11 8T Series | Overview 18 11* 28 32 Contact #22D 35 Contact #20 Contact #16 Contact #12 11#16 26#20 2#16 Service I 32#20 66#22D Service I Service M 16 35 39 41 11#12 16#16 79#22D 41#20 Service I Service II Service M 37#20 2#16 Service I Service II 20 11* Service I 22 21* 32 35 53* 55 21#16 32#20 100#22D 53#20 55#20 Service II Service I Service M Service I Service I 24 04 48#20 8#16 Service I 19* 24* 29* 19#12 12#12 12#16 Service I 29#16 128#22D 61#20 Service I Service M Service I Service I * Layout not available on 8T2 & 8T4 (short grommet). On demand only, please consult us. 12 35 61* 8T Series | Overview Contact layouts (matrix) Shell Size 08 10 12 14 16 18 20 22 24 Layout Service 8T MIL-DTL-38999 (QPL) HE309 Number of Contacts #22D 6 #20 08-35 M OK Q Q 6 08-98 I OK Q Q 3 3 10-05 I OK Q (1) 5 5 10-35 M OK Q Q 13 10-98 I OK Q Q 6 6 7 #16 13 10-99 I OK Q 7 12-03 I OK Q 3 3 12-04 I OK Q (1) 4 4 Q 12-08 I OK 8 12-26 M OK 8 6 12-35 M OK Q 22 22 Q 12-98 I OK Q Q 10 14-05 II OK Q (1) Q 5 14-15 I OK Q (1) Q 14-18 I OK 14-19 I OK 14-35 M OK 14-97 I OK 16-06 I 16-08 16-26 8 2 10 5 15 14 18 18 Q 19 19 Q Q 37 Q Q 12 8 OK Q Q 6 6 or 6 Coax II OK Q (1) Q 8 I OK Q (1) Q 26 16-35 M OK Q Q 55 16-99 I OK Q Q 23 18-11 II OK Q (1) Q 11 28 26 32 32 18-28 I OK Q 18-32 I OK Q Q Q Q 8 55 21 OK I OK 20-16 II OK 20-35 M OK Q Q 79 20-39 I OK Q (2) Q 39 37 20-41 I OK Q Q 41 41 22-21 II OK Q (1) Q 21 22-32 I OK Q Q M OK I OK 22-55 I OK 2 11 M 22-35 4 26 18-35 22-53 1 37 20-11 66 2 66 11 Q Q 24-04 I OK Q 24-19 I OK Q (1) 24-24 II OK Q (1) 24-29 I OK Q (1) 24-35 M OK Q 24-61 I OK Q (1) 11 16 16 79 32 Q 100 Q 53 53 55 55 56 48 Q 2 21 32 Q #12 100 8 19 19 24 12 Q 29 29 Q 128 Q 61 12 128 61 OK SOURIAU's layout Q SOURIAU's layout & layout according to corresponding norm (1) Not qualified for short grommet version (8T2 & 8T4) (2) Not qualified for 8T4 short grommet version 13 8T SERIES (c) 2019 SOURIAU - SOURIAU is a registered trademark 8T Series Standard Series Technical features .................................................................................................... 16 Ordering information .............................................................................................. 17 Dimensions: Plugs: 8T5, 8T15, 8T6 & 8T16 types .................................................................. 19 In line receptacle: 8T1 type ................................................................................ 20 Jam nut receptacle: 8T7 type ............................................................................. 20 Square flange receptacles: 8T0, 8T2, 8T3, 8T4 & 8T10 types ............................ 21 Receptacle with straight PC tail contacts................................................................. 23 Mated/unmated connectors .................................................................................... 23 Aluminum backshells ............................................................................................... 24 Aluminum protective caps ....................................................................................... 27 8T Series | Low Profile Bayonnet Connectors Description * Low profile / No scoop proof * Bayonet locking system * 11 shell types * 43 layouts * High density connector from 1 to 128 contacts * Excellent shock vibration and fluid resistance * QPL qualified * Standards: - MIL-C 38999 Series II - NFC 93422 HE 309 - VG 96912 Series II - PAN 6433-1 - BS 9522 N 003 Technical features Mechanical * Shell: Aluminum alloy * Plating: Black zinc nickel (Z) Nickel (F) Olive green cadmium (B) Hard anodized (C) * Insulator: Thermoplastic * Grommet and seal: Silicone elastomer * Contact: Copper alloy * Plating: Gold over nickel * Endurance: 500 mating cycles * Shock: 300g, 3ms duration * Vibration: Random 100 to 1000Hz - 1g2/Hz * Contact retention (mini force in N): Size 22D: 44N Size 16: 110N Size 20: 67N Size 12: 110N 16 Electrical Environmental * Test voltage (Vrms): * Temperature range: Zinc nickel plating (Z): Cadmium plating (B): Nickel plating (F): Hard anodized (C): Service M I II Sea level 1300 1800 2300 at 21 000 m 800 1000 1000 * Contact resistance: Size 22D: 14.6m Size 20: 7.3m Size 16: 3.8m Size 12: 3.5m * Insulation resistance: 5000M (at 500Vdc) * Contact rating: Size 22D: 5A Size 20: 7.5A Size 16: 13A Size 12: 23A * Shell continuity (with EMI ring): Black zinc nickel plating: 2.5m Olive green plating: 2.5m Nickel plating: 1m -65C +175C -65C +175C -65C +200C -65C +200C * Sealing (mated connectors): Differential pressure 1 bar Leakage 8cm3/h * Salt spray to: MIL-STD 1344 method 1001: . 500 hours (plating B & Z) . 48 hours (plating F & C) NFC 93422: 48 hours (plating F & C) * Damp heat: MIL-C 38999: 10 cycles (24 hours) NFC 93422: 56 days * Resistance to fluids: To MIL-L 38999: MIL-L 7808, MIL-L 23699, MIL-H 5606, MIL-A 8243, MIL-C 87936, MIL-G 3056, MIL-T 5624 (JP5); hydraulic fluids; solvents To NFC 93422: F 46, F 54, 0/180, H 515, H 542, XH 45 8T Series | Low Profile Bayonnet Connectors Ordering information SOURIAU part number Basic Series 8T 0 - 14 B 35 P N Shell type: 0: Square flange receptacle (front mount with accessory threads) 1: In line receptacle (with accessory threads) 2: Square flange receptacle (rear mount without accessory threads) 3: Square flange receptacle (rear mount with accessory threads) 4: Square flange receptacle (front mount without accessory threads) 5: Plug with RFI shielding 6: Plug without RFI shielding 7: Jam nut receptacle (with accessory threads) 10: Square flange receptacle (front mount, rear knurling) 15: Plug with RFI shielding (rear knurling) 16: Plug without RFI shielding (rear knurling) Contact style: (for more information please see page 30) -: Connectors with standard crimp contacts L: Receptacle with long PC tail C: Receptacle with short PC tail P: Receptacle with solder cup Shell size: 08; 10; 12; 14; 16; 18; 20; 22; 24 Plating: Z: Black zinc nickel F: Nickel B: Olive drab cadmium C: Hard anodized Contact layout: See pages 11 to 13 Contact type: P: Pin S: Socket A: Connector supplied less pin contact or with specific contacts (connector marking : A + orientation) B: Female connector without contact or with special contacts (connector marking : B + orientation) Orientation: N, A, B, C & D Special custom: None: Standard plastic cap M: Antistatic plastic cap L: For P and S contact type only, connector delivered without contacts, connector marking P or S (without L) 17 8T Series | Low Profile Bayonnet Connectors MIL-DTL-38999 Series II part number Basic Series MS 27497T 14 B 35 P P N Shell type & Class: 27472T: Square flange receptacle (front mount with accessory threads) 27508E: Square flange receptacle (rear mount without accessory threads) 27497T: Square flange receptacle (rear mount with accessory threads) 27499E: Square flange receptacle (front mount without accessory threads) 27484T: Plug with RFI shielding 27473T: Plug without RFI shielding 27474T: Jam nut receptacle (with accessory threads) 27472E: Square flange receptacle (front mount, with accessory threads and backnut) 27484E: Plug with RFI shielding (with accessory threads and backnut) 27473E: Plug without RFI shielding (with accessory threads and backnut) Shell size: 08; 10; 12; 14; 16; 18; 20; 22; 24 Plating: Z: Black zinc nickel B: Olive drab cadmium F: Nickel Contact layout: See pages 11 to 13 Contact type: P: Pin S: Socket A: Connector supplied less pin contact or with specific contacts (connector marking : A + orientation) B: Female connector without contact or with special contacts (connector marking : B + orientation) Orientation: empty: N A, B, C & D L: For P and S contact type only, connector delivered without contacts, connector marking P or S (without L) HE309 Series part number Basic Series Shell type: 03: Square flange receptacle with thread for back fitting 05: Square flange receptacle without thread for back fitting 06: Plug without RFI shielding 07: Jam nut receptacle Class: T: Sealed Shell size: 08; 10; 12; 14; 16; 18; 20; 22; 24 Contact layout: See pages 11 to 13 Contact type: P: Pin S: Socket Orientation: N, A, B, C & D Plating: 6: Nickel 7: Olive drab cadmium 8: Hard anodized Specification -: Connector delivered with contacts L: Connector delivered without contacts 18 HE309 03 T 10 35 6 L 8T Series | Low Profile Bayonnet Connectors Dimensions Plug 8T5 type & 8T15 type A OB C 8T5 type Plug with accessories thread, with grounding ring 8T15 type Plug with integrated backshell, with grounding ring 8T5 type Shell size A 8T15 type 08 10 12 14 16 18 20 22 24 Min. 21.26 21.26 21.26 21.26 21.26 21.26 21.26 21.26 21.26 Max. 22.59 22.59 22.59 22.59 22.59 22.59 22.59 22.59 22.59 19 21.75 26.10 29.30 32.45 35.25 38.80 41.60 44.80 Min. 23.38 23.38 23.38 23.38 23.38 23.38 23.38 23.38 23.38 Max. 23.57 23.57 23.57 23.57 23.57 23.57 23.57 23.57 23.57 OB+0 -0.15 C 8T5/8T15 types Plug 8T6 type & 8T16 type A OB C 8T6 type Plug with accessories thread, without grounding ring 8T16 type Plug with integrated backshell, without grounding ring 8T6 type Shell size A Min. Max. 8T16 type 08 10 12 14 16 18 20 22 24 21.31 21.31 21.31 21.31 21.31 21.31 21.31 21.31 21.31 22.65 22.65 22.65 22.65 22.65 22.65 22.65 22.65 22.65 19.03 21.78 26.13 29.33 32.48 35.28 38.83 41.63 44.83 Min. 23.43 23.43 23.43 23.43 23.43 23.43 23.43 23.43 23.43 Max. 23.63 23.63 23.63 23.63 23.63 23.63 23.63 23.63 23.63 OB 0.1 C 8T6/8T16 types Note: All dimensions are in millimeters (mm) 19 8T Series | Low Profile Bayonnet Connectors Dimensions In-line receptacle 8T1 type C OB OA 11.28 0.06 9.08 0.79 OD 1.57 0.08 Shell size 8T1 type In line receptacle with accessories thread 08 10 12 14 16 18 20 22 24 0.07 13.19 16.14 20.43 23.65 26.78 29.95 33.13 36.30 39.50 OB 0.08 11.96 14.93 19.00 22.17 25.35 28.52 31.70 34.87 38.05 14.38 18.68 21.98 25.38 27.58 31.11 34.38 37.78 41.78 17.80 22.10 25.40 28.80 31.00 34.40 37.80 41.20 45.20 OA C 0.25 OD 0.27 Jam nut receptacle 8T7 type D E Max. panel thickness: 2.8 Shell size A 2.5 0.22 OF 8T7 type Jam nut receptacle with accessories thread Panel cut-out 08 10 12 14 16 18 20 22 24 11.79 11.13 11.13 11.13 11.13 11.13 11.13 11.79 11.79 B 0.99 8.36 8.36 8.36 8.36 8.36 8.36 7.70 7.70 7.70 OC 0.08 12.01 14.98 19.05 22.22 25.40 28.57 31.75 34.92 38.10 0.12 D 27.40 30.61 33.75 36.96 40.10 43.31 46.45 51.23 54.41 E 0.37 31.85 35.02 38.20 41.37 45.34 48.10 51.30 54.46 57.63 OF 0.32 35.05 38.24 41.42 44.59 49.36 51.35 54.50 57.55 60.85 0 G -0.25 21.08 24.26 27.53 30.68 33.86 37.06 40.03 43.21 46.38 OH +0.25 0 22.46 25.58 28.80 31.98 35.15 38.28 41.50 44.68 47.85 Max tightening torque (mN) 9 10 13 20 23 25 26 27 29 Note: All dimensions are in millimeters (mm) 20 OH G B OC A 8T Series | Low Profile Bayonnet Connectors Dimensions Square flange receptacle 8T0 type, 8T4 type & 8T10 type 8.12 0.07 12.25 0.79 8.12 0.07 13.85 0.05 8T0 type Square flange receptacle with accessories thread, front mounting 1.57 0.08 B OA OA OA 8.12 0.07 7.8 8T4 type Square flange receptacle with short grommet, front mounting 1.57 0.08 B 8T0 type 8T10 type Square flange receptacle with integrated backshell, front mounting 1.57 0.08 B 8T4 type 8T10 type D D D C OE OG Panel cut-out 8T0/8T4/8T10 types Shell size OA 08 10 12 14 16 18 20 22 24 12.96 14.93 19.00 22.17 25.35 28.52 31.70 34.87 38.05 3.71 3.71 3.71 3.71 3.71 3.71 4.27 4.27 4.27 Min. 20.52 23.73 26.11 28.50 30.86 33.22 36.42 39.60 42.77 Max. 21.03 24.23 26.59 28.98 31.34 33.73 36.91 40.08 43.26 0.08 B Max. C D OE 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 Min. 3.08 3.08 3.08 3.08 3.08 3.08 3.08 3.08 3.71 Max. 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.99 14.15 17.32 21.69 24.87 28.04 31.22 34.39 37.57 40.74 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 OF OG 0.15 Note: All dimensions are in millimeters (mm) 21 8T Series | Low Profile Bayonnet Connectors Dimensions Square flange receptacle 8T2 type & 8T3 type 11.29 0.07 9.08 0.79 11.29 0.07 OB OA OB OA 4.74 0.12 8T2 type Square flange receptacle with short grommet, rear mounting 1.63 0.09 C 8T3 type Square flange receptacle with accessories thread, rear mounting 1.63 0.09 C 8T2 type 8T3 type E D OF O E E H OG 8T2/8T3 types Shell size 08 10 12 14 16 18 20 22 24 OA 0.08 13.25 16.20 20.49 23.71 26.84 30.01 33.19 36.36 39.56 OB 0.09 12.02 14.99 19.06 22.25 25.41 28.58 31.76 34.93 38.11 C Max. 3.71 3.71 3.71 3.71 3.71 3.71 4.27 4.27 4.27 Min. 20.57 23.78 26.16 28.55 30.91 33.27 36.47 39.65 42.82 Max. 21.10 24.31 26.69 29.08 31.71 34.10 37.28 40.45 43.63 D E OF G 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93 Min. 3.08 3.08 3.08 3.08 3.08 3.08 3.08 3.08 3.71 Max. 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.99 0.15 OH Min. 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91 14.15 17.32 21.69 24.87 28.04 31.22 34.39 37.57 40.74 Note: All dimensions are in millimeters (mm) 22 Panel cut-out 8T Series | Low Profile Bayonnet Connectors Dimensions Receptacle with straight PC tail contacts D L 0 L -0.20 0 OA OA -0.05 B 8T0/8T10 types B C L L C OA OA 8T3 type D 8T7 type Contact style Size Type #22D M/F #22D M/F #20 / #16 / #12 M/F #22D / 20 M/F #16 M/F #12 M/F #22D M #22D F #20 / #16 M #12 M #22D M #22D F #20 / #16 M #12 M #22D M #22D F #20 / #16 M #12 M Shell size Length 08 to 18 20 to 24 L 8.50 C 4.00 C 5.10 C/L 0.70 C/L 1.15 C/L 2.05 C/L 15.05 L 15.05 C 15.22 C 15.22 C/L 13.40 L 13.40 C 13.57 C 13.57 C/L 13.61 12.95 L 13.61 12.95 C 13.78 13.12 C 13.78 M: Male contact, F: Female contact, C: Short PC tail, L: Long PC tail Mated/unmated dimensions 8T7 type with 8T5/8T15/8T6/8T16 types 8T1 type with 8T5/8T15/8T6/8T16 types A A Max. B Max. With plug 8T6 A Max. B Max. With plug 8T15 A Max. B Max. B 8T1 type in-line receptacle 8T2/8T3 types square flange receptacle With plug 8T16 A Max. A B B 8T7 type jam nut receptacle With plug 8T5 8T0/8T4/8T10 types with 8T5/8T15/8T6/8T16 types A A B Shell size 8T2/8T3 types with 8T5/8T15/8T6/8T16 types B Max. 08 to 18 27.68 33.86 27.74 33.92 28.65 34.83 28.71 34.89 20 to 24 28.34 34.52 28.40 34.58 29.31 35.49 29.37 35.55 With plug 8T5 A Max. B Max. With plug 8T6 A Max. B Max. With plug 8T15 A Max. B Max. With plug 8T16 A Max. B Max. 8T0/8T4/8T10 types square flange receptacle With plug 8T5 A Max. B Max. With plug 8T6 A Max. B Max. With plug 8T15 A Max. B Max. With plug 8T16 A Max. B Max. 27.77 33.95 27.83 34.01 28.74 34.92 28.80 34.98 24.60 30.78 24.66 30.64 25.57 31.75 25.63 31.81 Note: All dimensions are in millimeters (mm) 23 8T Series | Accessories Aluminum backshells Ordering information Basic Series 8T AB 05 A 16 W Accessories type Type: 01: Backnut 04: Crimp ring 02: Cable clamp 05: Band lock 03: Shrink boot 06: Double cone Angle: A: Straight B: 90 (Type 02 only) Shell size: 08, 10, 12, 14, 16, 18, 20, 22, 24 Finish: Z: Black zinc nickel W: Olive green cadmium F: Nickel A: Black anodized Self locking option: None S: Self locking (available for Types 01 & 02 - mandatory for Type 05) Cable entry (Type 05 only): 01, 02 (02 mandatory for shell size 08 & 10) Drain hole option: None D: Drain hole (Type 03 only) Assembly instructions Please see "Common Section" p.34 for assembly instructions and Band-it. Dimensions Aluminum backshell Type 01 - Backnut 9.65 Max (Self locking type) OA Thread OB 6.35 Max (Non self locking type) Shell size OA Min OB Max 08 6.7 17.9 10 9.95 20.9 12 12.85 24.3 14 17.0 27.9 16 19.25 31.3 18 21.7 35.3 20 24.7 38.1 22 27.8 41.5 24 32.0 44.5 Thread: See page 27 for information. Note: All dimensions are in millimeters (mm) 24 S 01 - 8T Series | Accessories Aluminum backshells Aluminum backshell Type 02 - Cable clamp A Angle - straight B Angle - 90 F C Thread C OB OA Thread OB D OA E OA Shell size Min Max 08 2.49 10 12 OB Max C Max D Max E Max F Max 5.94 17.9 21.5 23.1 29.5 20 3.89 5.94 20.9 21.5 23.1 29.5 21.5 4.83 8.33 24.3 24.5 25.6 31.5 23.5 14 6.60 11.61 27.9 27.5 26.9 35.8 25.5 16 7.19 15.6 31.3 31.5 29.4 40.1 27.5 18 8.26 16.1 35.3 35.5 35.8 40.6 30.5 20 8.71 17.73 38.1 37 38.3 42.7 31.5 22 9.68 20.9 41.5 40.5 42.1 46.2 34.5 24 10.62 21.67 44.5 45 44.7 49 36.5 Thread: See page 27 for information. Aluminum backshell Type 03 - Shrink boot Shell size OC OA Thread OB 18 Max OA Min OB Max C Max 08 6.7 19.0 11.3 10 9.95 21.5 14.9 12 12.85 25.3 17.8 14 16.05 29.1 21.27 16 19.2 31.7 24.3 18 21.5 35.5 26.4 20 24.7 39.3 30.8 22 27.8 41.8 34.1 24 31 46.9 36.6 Thread: See page 27 for information. Note: All dimensions are in millimeters (mm) 25 8T Series | Accessories Aluminum backshells Aluminum backshell Type 04 - Crimp ring Shell size OA Min OB Max 08 10 12 14 16 18 20 22 24 6 8.2 10.5 13.6 16.9 20 23.2 26.1 28.1 17.9 20.9 24.3 27.9 31.3 34.3 38.1 41.5 44.4 OA Thread OB 22 Max Thread: See page 27 for information. Aluminum backshell Type 05 - Band lock 08 10 12 14 16 18 20 22 24 OA Thread OB OA Max - Entry size 01 02 6.6 8 8 11.2 11.2 14.4 12.8 16 16 19.1 16 20.7 17.6 23.9 19.1 25.5 Shell size 34 Max OB Max 17.9 24.9 29.3 32.4 35.6 38.4 41.6 44.8 47.9 Thread: See page 27 for information. Aluminum backshell Type 06 - Double cone OC 30.00 Max D Thread OA OB HE 308 standard - Screen termination and heat shrink boot Shell size OA0.07 OB0.12 OC0.12 D0.07 08 10 12 14 16 18 20 22 24 7.1 10.25 13.05 15.25 18.45 20.65 23.85 26.95 30.15 15.55 18.45 21.85 25.05 28.05 31.05 34.45 37.45 40.75 19.35 23.35 25.35 28.35 31.35 34.35 38.35 41.35 44.35 16.7 20.7 22.7 25.7 28.7 31.7 35.7 38.7 41.7 Thread: See page 27 for information. Note: All dimensions are in millimeters (mm) 26 8T Series | Accessories Aluminum backshells Recommended installation torque Shell Size Installation Torque (Inch-Pounds) 08 to 18 40 20 to 24 80 Thread information Shell size UNEF Thread Shell size UNEF Thread 08 7/16-28 2B 18 1 1/16 -18 2B 10 9/16-24 2B 20 1 3/16 -18 2B 12 11/16-24 2B 22 1 5/16 -18 2B 14 13/16-20 2B 24 1 7/16 -18 2B 16 15/16-20 2B Note: Torque values are based on 80% of the coupling thread strength specified in SAE-AS85049 standard. Aluminum protective caps Ordering information Basic Series 8T E 01 B 14 Cap type: E: Cap for receptacle F: Cap for plug Fixing type: Cap for receptacle 01: Plastic sleeved metal cord with eyelet 02: Plastic sleeved metal cord with ring Cap for plug 01: Plastic sleeved metal cord with eyelet Plating: B: Olive green cadmium F: Nickel Shell size: 08, 10, 12, 14, 16, 18, 20, 22, 24 Dimensions Cap for receptacle Type 01 Cap for receptacle Type 02 A Cap for plug Type 01 A D A C B B D E F F F Shell size 08 10 12 14 16 18 20 22 24 O A Max. 20.83 20.83 20.83 20.83 20.83 20.83 20.83 20.83 20.83 B Max. 19.05 21.82 26.19 29.36 32.54 35.71 38.89 41.68 44.86 O C Max. 18.29 21.59 25.40 28.70 31.75 35.05 38.10 41.40 44.45 OD 3.12 3.12 3.12 3.12 3.12 3.12 3.12 3.12 3.53 OE 22.61 25.65 28.96 32.00 35.31 38.35 41.66 44.70 48.01 F 76.20 76.20 88.90 88.90 88.90 88.90 101.60 101.60 101.60 Note: All dimensions are in millimeters (mm) 27 8T SERIES (c) 2019 SOURIAU - SOURIAU is a registered trademark 8T Series Common Section Contacts: Crimp contacts.................................................................................................... 30 Straight PC tail contacts...................................................................................... 30 Filler plugs .......................................................................................................... 30 Tooling: Insertion and extraction tools ............................................................................. 31 Crimping tools .................................................................................................... 31 Backshell tightening tools................................................................................... 31 Tightening support ............................................................................................. 31 Slackening tools.................................................................................................. 31 Wiring instruction..................................................................................................... 32 Sealing gaskets ........................................................................................................ 33 Orientations ............................................................................................................. 33 Dummy receptacles ................................................................................................. 33 Backshells assembly................................................................................................. 34 Coordinates for straight PC tail terminations........................................................... 36 Cross reference list................................................................................................... 45 8T Series | Common Section Contacts Crimp contacts Contact size Contact type Pin #22D Socket Pin #20 Socket Pin #16 Socket Pin #12 Socket Conductor section External O over insulator AWG mm Min Max Min Max Min Max O 0.76 26 22 0.12 0.40 0.71 1.37 1.00 24 20 0.21 0.60 1.02 2.11 1.60 20 16 0.60 1.34 1.65 2.77 2.40 14 12 1.91 3.18 2.46 3.61 Straight PC tail contacts Contact size Contact type #22D Pin #20 Pin #16 Pin #12 Pin Contact length Part number L: Long PC tail 85990720900 C: Short PC tail 85990730900 L: Long PC tail 85990771900 C: Short PC tail 85990724900 L: Long PC tail 85997496A900 C: Short PC tail 85990726900 C: Short PC tail 85997711900 Filler plugs Contact size MS Part number (Rev. N) Color SOURIAU Part number Color #22D MS27488-22-2 Black 8660-212 Black #20 MS27488-20-2 Red 8522-389A Red #16 MS27488-16-2 Green 8522-390A Blue #12 MS27488-12-2 Orange 8522-391A Yellow Direction of introduction in grommet 30 These filler plugs are installed at the rear of unwired contact to maintain connector sealing. SOURIAU Part number MIL-DTL-38999 contacts without color code Part number Color code 85990702JJ M39029/58-360 Black/Blue/Orange 85990710900 M39029/57-354 Yellow/Green/Orange 85990703SA M39029/58-363 Orange/Blue/Orange 85990711900 M39029/57-357 Purple/Green/Orange 85990704MJ M39029/58-364 Yellow/Blue/Orange 85990712900 M39029/57-358 Grey/Green/Orange 85990705MJ M39029/58-365 Green/Blue/Orange 85990713900 M39029/57-359 White/Green/Orange 8T Series | Common Section Tooling Insertion and extraction tools Color Contact size Material Part number MIL standard Insertion Extraction #22D Plastic M81969/14-01 Green White #20 Plastic M81969/14-10 Red Orange #16 Plastic M81969/14-03 Blue White #12 Plastic M81969/14-04 Yellow White Crimping tools Wire sizes Contact type Contact size Pin #22D Socket Pin #20 Socket Pin #16 Socket Pin #12 Socket Turret Part number 22 24 26 28 - 0.60 0.38 0.21 20 22 24 M22520/1-04 M22520/2-10 1.34 0.93 0.60 16 18 20 M22520/1-04 - 3.18 1.91 14 12 M22520/1-04 - Max torque in m/daN 10 12 14 0.62 16 M22520/2-09 M22520/2-06 Tightening support Backshell tightening pliers, part number: 8498-03 Square jaws (order 2 jaws), part number: 8500-1015 8 Locator Part number AWG 0.38 0.21 0.15 0.095 8599-0802 Tightening of rear accessories: Shell size Plier M22520/2-01 (SOURIAU 8476-01) mm Backshell tightening tools 8498-03 Plier M22520/1-01 18 20 22 1.24 24 Part number: 8599-0802 This tool is made up of dummy receptacles housings of all 9 sizes for all key polarisation, and secures free connectors during wiring and fitting of rear accessories. Slackening tools 8498-04 Strap clamp, part number: 8498-04 Spare strap, part number: 8498-103 31 8T Series | Common Section Wiring instruction Cable preparation and wire stripping Contact size #22D L 4 #20 #16 L #12 6 L = length of wire stripping Insertion of wire in contact barrel Conductor insulation 0.5 to 0.8 mm Wire When inserting the stripped wire into the contact barrel check that no strands are left outside and that the wire is visible through the wire inspection hole in the barrel. Barrel Inspection hole Important: - Slide any accessories over wire strands before carrying out the following operations. - Contacts are inserted and extracted from the rear of the connector. Insertion of the contacts Extraction of the contacts 1 - Engage the crimp cable / contact asembly into the longitudinal slot of the plastic tool (coloured tip). Slide the tool down the cable until the tip of the tool abuts the contact retention shoulder. 1 - Engage the appropriate cable into the longitudinal slot of the tool with the white tip towards connector. 2 - Introduce the contact into the required contact cavity in the insulator, pushing tool axialy, until the contact snaps into position in clip. 3 - Withdraw the tool from rear. Check that contact is firmly locked by pulling wire gently. When connector is fully loaded, check the position of contact tips. They should all be in the same plane. Nota: For larger sizes of cable which are stiff enough manual insertion without tool is preferable. 32 1 2 3 2 - Slide the tool down towards the contact. Insert the tool in the insulator until it abuts the contact shoulder. 3 - Holding the tool-contact and cable assembly together, remove them simultaneously. 1 2 3 8T Series | Common Section Gaskets Part Numbers Part Numbers Shell size For receptacle Type 0 For receptacle Type 7 Shell size For receptacle Type 0 For receptacle Type 7 08 8525 1431 AS3582-022 18 8525 1436 AS3582-030 10 8525 1432 AS3582-024 20 8525 1437 AS3582-031 12 8525 1433 AS3582-026 22 8525 1438 AS3582-032 14 8525 1434 AS3582-028 24 8525 1439 AS3582-033 16 8525 1435 AS3582-029 Orientations 114 132 120 14 100 79 66 134 121 16 100 82 70 130 118 18 100 82 70 130 118 20 100 82 70 130 118 22 100 85 74 126 115 24 100 85 74 126 115 37 128 68 100 100 100 37 72 80 10 86 100 D 100 12 10 10 37 118 C - 10 - 37 82 B 100 10 08 View from front face of receptacle 28 D 28 C 28 B 28 A 28 N 37 Angles (degrees) Shell size 10 A N Polarization is determined by the master keyway position. The secondary keyway positions remain fixed. 100 100 Dummy receptacles 08 13.24 B Min. Max. 20.57 21.10 C 15.09 D Part Numbers Min. Max. Olive green cadmium plating 3.08 3.30 8T3-08 G UR Nickel plating 8T3-08 F UR 10 16.19 23.78 24.31 18.26 3.08 3.30 8T3-10G UR 8T3-10F UR 12 20.48 26.16 26.69 20.62 3.08 3.30 8T3-12G UR 8T3-12F UR 14 23.70 28.55 29.08 23.01 3.08 3.30 8T3-14G UR 8T3-14F UR 16 26.84 30.91 31.71 24.61 3.08 3.30 8T3-16G UR 8T3-16 F UR 18 30.00 33.27 34.10 26.97 3.08 3.30 8T3-18G UR 8T3-18F UR 20 33.18 36.47 37.28 29.36 3.08 3.30 8T3-20G UR 8T3-20F UR 22 36.35 39.65 40.45 31.75 3.08 3.30 8T3-22G UR 8T3-22F UR 24 39.55 42.82 43.63 34.93 3.71 3.99 8T3-24G UR 8T3-24F UR 11.28 0.06 1.62 0.08 B C A OA Shell size OD Note: All dimensions are in millimeters (mm) 33 8T Series | Common Section Backshells assembly Band lock Type 05 Step 1: Prepare cable braid Step 4: Install band Terminate wires to connector and screw the backshell to connector. Prepare the cable for termination process. WARNING ! Banding must occur on an un-fixtured cable assembly. Attaching a band to a firmly clamped cable will affect the applied forces and will also interfere with the cut-off operation. The cut-off operation causes a rotation of the band termination in order to lock the band. a ) Squeeze the gripper release lever of the banding tool and insert the band into the front end opening of the tool as shown on picture. WARNING ! The circular portion of looped band must always face downward. Cut-off handle Retention lip Conductors Braid Gripper release lever Step 2: Push braid over adaptor Push the braid over the retention lip to the adaptor incline point or ensuring 10.2mm [0.4"] minimum braid length over termination area. Milk the braid as required to remove the slack and insure a snug fit around the shield termination area. 10.2 Minimum length of braid over termination area Pull-up handle b ) Aligning the band and the tool with the shield termination area, squeeze the black pull-up handle repeatedly using short strokes until it locks against the tool body (this indicates that the band is compressed to the tool pre-calibrated tension). IMPORTANT ! Operator technique can affect the integrity of the band installation. The operator should use abbreviated or partial strokes of the pull-up handle as the band is pulling up against the braid. As the band becomes completely tight, apply a full strokes of the pull-up handle to ensure that the full calibrated force of the tool is applied as the handle locks into position. c ) Complete the clamping process by squeezing the gray cut-off handle, allowing the cable to rotate slightly during cut-off. Adaptor Incline Step 3: Prepare band Step 5: Inspect the shield termination Roll the band through the buckle slot twice. Pull on the band until the tail length indicator mark is within approximately 6.4 mm (0.250 in) of the buckle slot. The band may be tightened further if desired. WARNING ! Always roll band through the buckle slot twice in order to ensure correct functioning. Remove the excess band from the tool. Inspect shield termination. Install the heat shrinkable boot, if required. WARNING ! Tools and Bands should never be lubricated. Buckle Note: All dimensions are in millimeters (mm) 34 Tail length indicator mark 8T Series | Common Section Double cone Type 06 Step 1: Prepare cable braid Step 3-a: Double folding Prepare the cable for termination process and slide the backshell parts onto the cable the items in the order shown in above figure. Screw the backshell at the rear of the connector. Fold back the braid on the inner cone and fix it with an adhesive tape on to the jacket of the cable. Slide the outer cone over the braid and the inner cone. Screw the backnut at the rear of the backshell and tighten it. Install heat shrinkable boot. Please refer to Step 3-b for alternate method (Single folding). Conductors Braid Inner Outer Backnut Cable cone cone jacket Backnut Step 2: Push braid over adaptor Release the braid and slide the inner cone over the braid. Braid Step 3-b: Single folding Cut the braid as shown. Slide the outer cone over the braid and the inner cone. Screw the backnut at the rear of the backshell and tighten it. Install heat-shrinkable boot. Braid Inner cone Braid Band-it Flat stainless steel standard band Pre-coiled stainless steel standard band Hand banding tool Part number M85049/128-3 M85049/128-4 8599-9346 4.0 (REF.) 362 1.5 0.5 (REF.) 1.9 (REF.) 8.9 (REF.) Tail length indicator mark 6.2 (REF.) Designation Note: All dimensions are in millimeters (mm) 35 8T Series | Common Section Coordinates for straight PC tail terminations Viewed from front face of male insulator Hole sizes: 1mm min. (#22 and #20 contacts) and 1.3mm min. (#16 contact) coordinates in mm. 08 35 98 +Y +Y -X +X -X +X -Y -Y Ctc X Y Ctc X Y 1 +1.14 +1.98 A +1.65 +0.97 2 +1.98 -1.14 B 0.00 -1.90 3 0.00 -2.29 C -1.65 +0.97 4 -1.98 -1.14 5 -1.14 +1.98 6 0.00 0.00 10 05 35 98 99 +Y +Y +Y +Y -X +X -X -Y 36 -X +X +X -X +X -Y -Y -Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y A +1.65 +1.42 1 0.00 +3.71 8 -3.51 -1.14 A 0.00 +3.30 A +1.65 +2.85 B +2.86 -1.65 2 +2.16 +3.00 9 -3.51 +1.14 B +3.30 0.00 B +3.30 0.00 C 0.00 -3.30 3 +3.51 +1.14 10 -2.16 +3.00 C +1.65 -2.87 C +1.65 -2.87 D -2.86 -1.65 4 +3.51 -1.14 11 0 +1.42 D -1.65 -2.87 D -1.65 -2.87 E -1.65 +1.42 5 +2.16 -3.00 12 +1.24 -0.89 E -3.30 0.00 E -3.30 0.00 6 0.00 -3.71 13 -1.24 -0.89 F 0.00 0.00 F -1.65 +2.87 7 -2.16 -3.00 G 0.00 0.00 8T Series | Common Section 12 04 08 35 98 +Y +Y +Y +Y -X +X -X +X -Y -X +X -Y -X +X -Y -Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y A 0.00 +3.81 A +1.65 +3.99 1 +1.14 +5.00 12 -4.62 +2.24 A 0.00 +4.95 B +3.71 +0.89 B +4.32 0.00 2 +3.20 +4.01 13 -3.20 +4.01 B +3.18 +3.81 C 0.00 -2.11 C +3.05 -3.05 3 +4.62 +2.24 14 -1.14 +5.00 C +4.90 +0.76 D -3.71 +0.89 D 0.00 -4.32 4 +5.16 0.00 15 +1.14 +2.72 D +4.17 -2.67 E -3.05 -3.05 5 +4.62 -2.24 16 +2.97 +0.66 E 0.00 -3.43 F -4.32 0.00 6 +3.20 -4.01 17 +2.36 -1.91 F -4.17 -2.67 G -1.65 +3.99 7 +1.14 -5.00 18 0.00 -3.05 G -4.90 +0.76 H 0.00 +1.12 8 -1.14 -5.00 19 -2.36 -1.91 H -3.18 +3.81 9 -3.20 -4.01 20 -2.97 +0.66 J +1.65 -0.38 10 -4.62 -2.24 21 -1.24 +2.72 K -1.65 -0.38 11 -5.16 0.00 22 0.00 -0.76 37 8T Series | Common Section 14 05 18 19 97 +Y +Y +Y +Y -X +X -X +X -Y -X +X -Y -X -Y -Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y A 0 +2.54 A +1.65 +6.40 K -4.95 +2.87 A 0.00 +5.72 L -4.95 +2.87 A +1.65 +5.94 B +4.42 +0.61 B +4.95 +2.87 L -1.65 +6.40 B +3.30 +5.72 M -3.30 +5.72 B +4.52 +4.52 C +2.39 +3.76 C +6.60 0.00 M -1.65 +2.87 C +4.95 +2.87 N -1.65 +2.87 C +5.84 -0.58 D -2.39 -3.76 D +4.95 -2.87 N +1.65 +2.87 D +6.60 0.00 P +1.65 +2.87 D +4.52 -4.52 E -4.42 +0.61 E +3.30 -5.72 P +3.30 0.00 E +4.95 -2.87 R +3.30 0.00 E +1.65 -5.94 F 0.00 -5.72 R +1.65 -2.87 F +3.30 -5.72 S +1.65 -2.87 F -2.26 -5.97 G -3.30 -5.72 S -1.65 -2.87 G 0.00 -5.72 T -1.65 -2.87 G -5.26 -2.41 H -4.95 -2.87 T -3.30 0.00 H -3.30 -5.72 U -3.30 0.00 H -5.94 +1.65 J -6.60 0.00 U 0.00 0.00 J -4.95 -2.87 V 0.00 0.00 K -6.60 0.00 35 +Y -X +X -Y 38 +X Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y 1 +1.14 +6.65 9 +1.14 -6.65 17 -3.12 +5.51 24 +1.14 -4.37 31 +1.14 +1.88 2 +3.12 +5.51 10 -1.14 -6.65 18 -1.14 +6.65 25 -1.14 -4.37 32 +2.29 -0.10 3 +5.36 +4.06 11 -3.30 -5.89 19 +1.14 +4.37 26 -3.12 -3.23 33 +1.14 -2.08 4 +6.45 +2.03 12 -5.08 -4.45 20 +3.12 +3.02 27 -4.32 -1.27 34 -1.14 -2.08 5 +6.76 -0.25 13 -6.27 -2.49 21 +4.32 +1.02 28 -4.32 +1.02 35 -2.29 -0.10 6 +6.27 -2.49 14 -6.76 -0.25 22 +4.32 -1.27 29 -3.12 +3.02 36 -1.14 +1.88 23 +3.12 -3.23 30 -1.14 +4.37 37 0.00 -0.10 7 +5.08 -4.45 15 -6.45 +2.03 8 +3.30 -5.89 16 -5.36 +4.06 J -4.52 +4.52 K -1.65 +5.94 L -1.19 +2.06 M +1.19 -2.06 8T Series | Common Section 16 06 08 26 99 +Y +Y +Y +Y -X +X -X +X -Y -X -X +X -Y +X -Y -Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y A +3.07 +5.31 A 0.00 +5.99 A 0.00 +8.15 P -6.07 +5.44 A 0.00 +8.15 N -7.75 +2.51 B +6.12 0.00 B +3.25 +2.18 B +3.33 +7.44 R -3.33 +7.44 B +3.33 +7.44 P -6.07 +5.44 C 0.00 -6.12 C +5.84 -1.98 C +6.07 +5.44 S -1.78 +4.50 C +6.07 +5.44 R -3.33 +7.44 D -6.12 0.00 D +2.39 -5.49 D +7.75 +2.51 T +1.78 +4.50 D +7.75 +2.51 S -1.78 +4.50 E -3.07 +5.31 E -2.39 -5.49 E +8.10 -0.86 U +4.45 +2.39 E +8.10 -0.86 T +1.78 +4.50 F 0.00 0.00 F -5.84 -1.98 F +7.06 -4.09 V +4.53 -0.91 F +7.06 -4.09 U +4.45 +2.39 G -3.25 +2.18 G +4.80 -6.60 W +3.02 -3.84 G +4.80 -6.60 V +3.81 -1.91 H 0.00 -1.32 H +1.70 -7.98 X 0.00 -5.16 H +1.70 -7.98 W 0.00 -4.09 J -1.70 -7.98 Y -3.02 -3.84 J -1.70 -7.98 X -3.81 -1.91 K -4.80 -6.60 Z -4.53 -0.91 K -4.80 -6.60 Y -4.45 +2.39 Z 0.00 +0.64 L -7.06 -4.09 a -4.45 +2.39 L -7.06 -4.09 M -8.10 -0.86 b 0.00 +1.65 M -8.10 -0.86 N -7.75 +2.51 c 0.00 -1.65 35 +Y -X +X -Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y 1 -7.92 +2.18 12 -3.96 +2.18 23 -1.98 -5.82 34 +1.98 +3.33 45 +3.96 -4.67 2 -7.92 -0.10 13 -3.96 -0.10 24 -1.98 -8.10 35 +1.98 +1.04 46 +3.96 -6.96 3 -7.92 -2.39 14 -3.96 -2.39 25 0.00 +8.36 36 +1.98 -1.24 47 +6.15 +5.61 4 -6.15 +5.61 15 -3.96 -4.67 26 0.00 +4.47 37 +1.98 -3.53 48 +5.94 +3.33 5 -5.94 +3.33 16 -3.96 -6.96 27 0.00 +2.18 38 +1.98 -5.82 49 +5.94 +1.04 6 -5.94 +1.04 17 -2.26 +8.03 28 0.00 -0.10 39 +1.98 -8.10 50 +5.94 -1.24 7 -5.94 -1.24 18 -1.98 +5.61 29 0.00 -2.39 40 +4.37 +7.09 51 +5.94 -3.53 8 -5.94 -3.53 19 -1.98 +3.33 30 0.00 +4.67 41 +3.96 +4.47 52 +5.94 -5.82 9 -5.94 -5.82 20 -1.98 +1.04 31 0.00 -6.96 42 +3.96 +2.18 53 +7.92 +2.18 10 -4.37 +7.09 21 -1.98 -1.24 32 +2.26 +8.03 43 +3.96 -0.10 54 +7.92 -0.10 11 -3.96 +4.47 22 -1.98 -3.53 33 +1.98 +5.61 44 +3.96 -2.39 55 +7.92 2-.39 39 8T Series | Common Section 18 11 32 +Y -X +X -Y 35 +Y -X +X -Y 40 +Y Ctc X Y A +2.67 +6.60 Ctc X Y Ctc X Y A +1.68 +8.97 T -1.68 +8.97 B +6.35 +3.35 B +4.80 +7.75 U 0.00 +5.84 C +6.99 -1.35 C +7.26 +5.51 V +3.15 +4.90 D +4.55 -5.46 D +8.76 +2.49 W +5.31 +2.41 E 0.00 -7.14 E +9.07 -0.84 X +5.79 -0.84 F -4.55 -5.46 F +8.15 -4.06 Y +4.42 -3.84 G -6.99 -1.35 G +6.15 -6.73 Z +1.65 -5.61 H -6.35 +3.35 H +3.30 -8.51 a -1.65 -5.61 J -2.67 +6.60 J 0.00 -9.12 b -4.42 -3.84 K 0.00 +2.67 K -3.30 -8.51 c -5.79 -0.84 L 0.00 -2.34 L -6.15 -6.73 d -5.31 +2.41 M -8.15 -4.06 e -3.15 +4.90 N -9.07 -0.84 f 0.00 +2.44 P -8.76 +2.49 g +2.44 0.00 R -7.26 +5.51 h 0.00 -2.44 S -4.80 +7.75 j -2.44 0.00 -X +X -Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y 1 -9.07 +2.29 15 -5.11 -4.57 28 -1.14 +2.29 41 +1.14 -6.86 54 +5.11 0.00 2 -9.07 0.00 16 -5.11 -6.86 29 -1.14 0.00 42 +1.14 -9.14 55 +5.11 -2.29 3 -9.07 -2.29 17 -3.12 +8.00 30 -1.14 -2.29 43 +3.12 +8.00 56 +5.11 -4.57 4 -7.09 +5.71 18 -3.12 +5.71 31 -1.14 -4.57 44 +3.12 +5.71 57 +5.11 -6.86 5 -7.09 +3.43 19 -3.12 +3.43 32 -1.14 -6.86 45 +3.12 +3.43 58 +7.09 +5.71 6 -7.09 +1.14 20 -3.12 +1.14 33 -1.14 -9.14 46 +3.12 +1.14 59 +7.09 +3.43 7 -7.09 -1.14 21 -3.12 -1.14 34 +1.14 +9.14 47 +3.12 -1.14 60 +7.09 +1.14 8 -7.09 -3.43 22 -3.12 -3.43 35 +1.14 +6.86 48 +3.12 -3.43 61 +7.09 -1.14 9 -7.09 -5.71 23 -3.12 -5.71 36 +1.14 +4.57 49 +3.12 -5.71 62 +7.09 -3.43 10 -5.11 +6.86 24 -3.12 -8.00 37 +1.14 +2.29 50 +3.12 -8.00 63 +7.09 -5.71 11 -5.11 +4.57 25 -1.14 +9.14 38 +1.14 0.00 51 +5.11 +6.86 64 +9.07 +2.29 12 -5.11 +2.29 26 -1.14 +6.86 39 +1.14 -2.29 52 +5.11 +4.57 65 +9.07 0.00 13 -5.11 0.00 27 -1.14 +4.57 40 +1.14 -4.57 53 +5.11 +2.29 66 +9.07 -2.29 14 -5.11 -2.29 8T Series | Common Section 20 16 35 +Y +Y -X +X -X +X -Y -Y Ctc X Y Ctc X Y Ctc X Y 14 +1.35 -10.82 36 +7.90 -3.58 58 +3.40 -5.05 15 -1.35 -10.82 37 +6.55 -5.59 59 +1.22 -6.12 16 -3.71 -10.26 38 +4.67 -7.11 60 -1.22 -6.12 17 -5.89 -9.19 39 +2.49 -8.18 61 -3.40 -5.05 18 -7.77 -7.67 40 0.00 -8.81 62 -5.28 -3.53 19 -9.27 -5.77 41 -2.49 -8.18 63 -6.02 -1.22 20 -10.31 -3.58 42 -4.67 -7.11 64 -6.02 +1.22 21 -10.85 -1.22 43 -6.55 -5.59 65 -5.28 +3.53 Ctc X Y Ctc X Y Ctc X Y 22 -10.85 +1.22 44 -7.90 -3.58 66 -3.40 +5.05 A +3.00 +8.18 J -8.66 +0.91 1 +1.35 +10.82 23 -10.31 +3.58 45 -8.43 -1.22 67 -1.22 +3.71 B +6.88 +5.36 K -6.88 +5.36 2 +3.71 +10.26 24 -9.27 +5.77 46 -8.43 +1.22 68 +1.22 +3.71 C +8.66 +0.91 L -3.00 +8.18 3 +5.89 +9.19 25 -7.77 +7.67 47 -7.90 +3.58 69 +3.18 +2.29 D +7.82 -3.81 M 0.00 +4.45 4 +7.77 +7.67 26 -5.89 +9.19 48 -6.55 +5.59 70 +3.94 0.00 E +4.62 -7.37 N +3.91 +1.57 5 +9.27 +5.77 27 -3.71 +10.26 49 -4.67 +7.11 71 +3.18 -2.29 F 0.00 -8.71 P +2.39 -3.10 6 +10.31 +3.58 28 -1.35 +10.82 50 -2.49 +8.18 72 +1.22 -3.71 G -4.62 -7.37 R -2.39 -3.10 7 +10.85 +1.22 29 0.00 +8.20 51 -1.22 +6.12 73 -1.22 -3.71 H -7.82 -3.81 S -3.91 +1.57 -2.29 39 8 +10.85 -1.22 30 +2.49 +8.18 52 +1.22 +6.12 74 -3.18 9 +10.31 -3.58 31 +4.67 +7.11 53 +3.40 +5.05 75 -3.94 0.00 10 +9.27 -5.77 32 +6.55 +5.59 54 +5.28 +3.53 76 -3.18 +2.29 +1.35 11 +7.77 -7.67 33 +7.90 +3.58 55 +6.02 +1.22 77 0.00 12 +5.89 -9.19 34 +8.43 +1.22 56 +6.02 -1.22 78 +1.22 -0.74 13 +3.71 -10.26 35 +8.43 -1.22 57 +5.28 -3.53 79 -1.22 -0.74 +Y 41 +Y -X +X -X +X -Y Ctc X Y Z +5.92 +4.09 +0.87 a +7.15 b +6.73 -2.55 c +4.78 -5.39 d +1.73 -6.99 e -1.73 -6.99 f -4.78 -5.39 Ctc X Y Ctc X Y Ctc X Y A +1.65 +10.44 P -9.42 -4.80 d +2.84 -6.73 B +4.80 +9.42 R -10.44 -1.65 e -2.84 -6.73 Ctc X Y Ctc X Y g -6.73 -2.55 C +7.47 +7.47 S -10.44 +1.65 f -5.51 -4.80 A 0.00 +10.60 M -3.26 -10.09 h -7.15 +0.87 +4.09 -Y D +9.42 +4.80 T -9.42 +4.80 g -7.11 -1.88 B +3.28 +10.09 N -6.23 -8.58 i -5.92 E +10.44 +1.65 U -7.47 +7.47 h -7.11 +1.45 C +6.23 +8.58 P -8.58 -6.23 j -3.35 +6.38 F +10.44 -1.65 V -4.80 +9.42 i -5.89 +4.55 D +8.58 +6.23 R -10.09 -3.28 k 0.00 +3.81 G +9.42 -4.80 W -1.65 +10.44 j -3.20 +6.50 E +10.09 +3.28 S -10.60 0.00 m +2.98 +2.38 H +7.47 -7.47 X 0.00 +7.49 k 0.00 +4.17 F +10.60 0.00 T -10.09 +3.28 n +3.71 -0.85 J +4.80 -9.42 Y +3.20 +6.50 m +2.90 +1.22 G +10.09 -3.28 U -8.58 +6.23 p +1.66 -3.43 K +1.65 -10.44 Z +5.89 +4.55 n +2.69 -2.72 H +8.58 -6.23 V -6.23 +8.58 q -1.66 -3.43 L -1.65 -10.44 a +7.11 +1.45 p 0.00 -4.80 J +6.23 -8.58 W -3.28 +10.09 r -3.71 -0.85 M -4.80 -9.42 b +7.11 -1.88 q -2.69 -2.72 K +3.28 -10.09 X 0.00 +7.20 s -2.98 +2.38 N -7.47 -7.47 c +5.51 -4.80 r -2.90 +1.22 L 0.00 -10.60 Y +3.35 +6.38 t 0.00 0.00 41 8T Series | Common Section 22 21 +Y -X +X -Y 35 +Y -X +X -Y 42 Ctc X Y A +3.25 +9.78 B +7.34 C 53 Ctc X Y m -5.72 +6.60 +3.30 n -2.84 +8.26 +8.26 p 0.00 +6.60 +9.91 q +2.84 +4.95 -2.84 +11.56 r +5.72 +3.30 T 0.00 +9.91 s +5.72 0.00 U +2.84 +8.26 t +5.72 -3.30 -9.19 V +5.72 +6.60 u +2.84 -4.95 -6.07 W +8.53 +4.95 v 0.00 -6.60 -10.16 -1.65 X +8.53 +1.65 w -2.84 -4.95 -9.80 +3.12 Y +8.53 -1.65 x -5.72 -3.30 M -7.34 +7.24 Z +8.53 -4.95 y -5.72 0.00 N -3.25 +9.78 a +5.72 -6.60 z -5.72 +3.30 Ctc X +7.24 N -11.43 +9.80 +3.12 P -8.53 D +10.16 -1.65 R -5.72 E +8.33 -6.07 S F +4.65 -9.19 G 0.00 -10.31 H -4.65 J -8.33 K L +Y -X +X -Y Y P 0.00 +6.22 b +2.84 -8.26 AA -2.84 +4.95 R +4.06 +3.71 Ctc X Y Ctc X Y c 0.00 -9.91 BB 0.00 +3.30 S +5.44 -0.89 A +2.84 +11.56 G +8.53 -8.26 d -2.84 -8.26 CC +2.84 +1.65 T +2.39 -4.93 B +5.72 +9.91 H +5.72 -10.41 e -5.72 -6.60 DD +2.84 -1.65 U -2.39 -4.93 C +8.53 +8.26 J -5.72 -10.41 f -8.53 -4.95 EE 0.00 -3.30 V -5.44 -0.89 D +11.43 +3.30 K -8.53 -8.26 g -8.53 -1.65 FF -2.84 -1.65 W -4.06 +3.71 E +11.43 0.00 L -11.43 -3.30 h -8.53 +1.65 GG -2.84 +1.65 X 0.00 0.00 F +11.43 -3.30 M -11.43 0.00 k -8.53 +4.95 HH 0.00 0.00 Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y 1 -10.87 +6.12 21 -6.32 -2.41 41 -2.11 -2.41 61 +2.11 0.00 81 +6.32 0.00 2 -11.86 +3.91 22 -6.32 -4.83 42 -2.11 -4.83 62 +2.11 -2.41 82 +6.32 -2.41 3 -12.40 +1.55 23 -6.32 -7.24 43 -2.11 -7.24 63 +2.11 -4.83 83 +6.32 -4.83 4 -10.54 0.00 24 -6.32 -9.65 44 -2.11 -9.65 64 +2.11 -7.24 84 +6.32 -7.24 5 -12.40 -1.55 25 -4.22 +10.87 45 -2.11 -12.07 65 +2.11 -9.65 85 +6.32 -9.65 6 -10.87 -3.61 26 -4.22 +8.46 46 0.00 +10.87 66 +2.11 -12.07 86 +8.43 +8.46 7 -10.87 -6.02 27 -4.22 +6.05 47 0.00 +8.46 67 +4.22 +10.87 87 +8.43 +6.05 8 -8.43 +8.46 28 -4.22 +3.63 48 0.00 +6.05 68 +4.22 +8.46 88 +8.43 +3.63 9 -8.43 +6.05 29 -4.22 +1.22 49 0.00 +3.63 69 +4.22 +6.05 89 +8.43 +1.22 10 -8.43 +3.63 30 -4.22 -1.19 50 0.00 +1.22 70 +4.22 +3.63 90 +8.43 -1.19 11 -8.43 +1.22 31 -4.22 -3.61 51 0.00 -1.19 71 +4.22 +1.22 91 +8.43 -3.61 12 -8.43 -1.19 32 -4.22 -6.02 52 0.00 -3.61 72 +4.22 -1.19 92 +8.43 -6.02 13 -8.43 -3.61 33 -4.22 -8.43 53 0.00 -6.02 73 +4.22 -3.61 93 +8.43 -8.43 14 -8.43 -6.02 34 -4.22 -10.85 54 0.00 -8.43 74 +4.22 -6.02 94 +10.87 +6.12 15 -8.43 -8.43 35 -2.11 +12.07 55 0.00 -10.85 75 +4.22 -8.43 95 +11.86 +3.91 16 -6.32 +9.65 36 -2.11 +9.65 56 +2.11 +12.07 76 +4.22 -10.85 96 +12.40 +1.55 17 -6.32 +7.24 37 -2.11 +7.24 57 +2.11 +9.65 77 +6.32 +9.65 97 +10.54 0.00 18 -6.32 +4.83 38 -2.11 +4.83 58 +2.11 +7.24 78 +6.32 +7.24 98 +12.40 -1.55 19 -6.32 +2.41 39 -2.11 +2.41 59 +2.11 +4.83 79 +6.32 +4.83 99 +10.87 -3.61 20 -6.32 0.00 40 -2.11 0.00 60 +2.11 +2.41 80 +6.32 +2.41 100 +10.87 -6.02 8T Series | Common Section 24 04 Ctc X Y Ctc X Y 29 Ctc X Y +Y R -8.23 -10.80 q -7.90 -6.38 +Y J -2.31 -11.99 S -10.77 -8.28 r -9.58 -3.35 K -6.68 -10.31 T -12.52 -5.21 s -10.46 0.00 L -10.03 -7.04 U -13.49 -1.75 t -9.58 +3.35 M -11.91 -2.77 V -13.49 +1.75 u -7.90 +6.38 N -11.91 +2.77 -X +X W -12.52 +5.21 v -5.38 +8.78 P -10.03 +7.04 X -10.77 +8.28 w -2.18 +10.08 R -6.55 +10.31 -Y -X +X Y -8.23 +10.80 x +1.75 +6.66 S -2.31 +8.15 Z -5.16 +12.57 y +4.37 +3.78 T +2.31 +8.15 a -1.75 +13.49 z +6.55 0.00 U +5.79 +4.93 b +2.18 +10.08 AA +4.37 -3.78 V +8.10 0.00 c +5.38 +8.78 BB +1.75 -6.66 W +6.10 -4.60 -Y d +7.90 +6.38 CC -1.75 -6.66 Ctc X Y X +2.31 -7.37 Ctc X Y Ctc X Y e +9.58 +3.35 DD -4.37 -3.78 A 0.00 +12.22 Y -2.31 -7.37 A +1.75 +13.49 H +12.52 -5.21 f +10.46 0.00 EE -6.55 0.00 B +6.55 +10.31 Z -6.10 -4.60 B +5.16 +12.57 J +10.77 -8.28 g +9.58 -3.35 FF -4.37 -3.78 C +10.03 +7.04 a -8.10 0.00 C +8.23 +10.80 K +8.23 -10.80 h +7.90 -6.38 GG -1.75 -6.66 D +11.91 +2.77 b -5.79 +4.93 D +10.77 +8.28 L +5.16 -12.57 k +5.38 -8.78 HH 0.00 +3.35 E +11.91 -2.77 c 0.00 +4.09 E +12.52 +5.21 M +1.75 -13.49 m +2.18 -10.08 JJ +2.18 0.00 F +10.03 -7.04 d +3.40 0.00 F +13.49 +1.75 N -1.75 -13.49 n -2.18 -10.08 KK 0.00 -3.35 G +6.68 -10.31 e 0.00 -3.30 G +13.49 -1.75 P -5.16 -12.57 p -5.38 -8.78 LL -2.18 0.00 H +2.31 -11.99 f -3.40 0.00 35 Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y +Y 1 -12.17 +7.09 27 -6.32 +7.24 53 -2.11 0.00 79 +2.11 -7.24 104 +6.32 -12.07 2 -13.21 +4.83 28 -6.32 +4.83 54 -2.11 -2.41 80 +2.11 -9.65 105 +8.43 +11.28 3 -13.87 +2.41 29 -6.32 +2.41 55 -2.11 -4.83 81 +2.11 -12.07 106 +8.43 +8.43 4 -14.10 0.00 30 -6.32 0.00 56 -2.11 -7.24 82 +4.06 +13.49 107 +8.43 +6.02 5 -13.87 -2.41 31 -6.32 -2.41 57 -2.11 -9.65 83 +4.22 +10.85 108 +8.43 +3.61 6 -13.21 -4.83 32 -6.32 -4.83 58 -2.11 -12.07 84 +4.22 +8.43 109 +8.43 +1.19 7 -12.17 -7.09 33 -6.32 -7.24 59 0.00 +13.26 85 +4.22 +6.02 110 +8.43 -1.19 8 -10.77 +9.07 34 -6.32 -9.65 60 0.00 +10.85 86 +4.22 +3.61 111 +8.43 -3.61 -X +X -Y 9 -10.54 +4.83 35 -6.32 -12.07 61 0.00 +8.43 87 +4.22 +1.19 112 +8.43 -6.02 10 -10.54 +2.41 36 -4.06 +13.49 62 0.00 +6.02 88 +4.22 -1.19 113 +8.43 -8.43 11 -10.54 0.00 37 -4.22 +10.85 63 0.00 +3.61 89 +4.22 -3.61 114 +8.43 -10.85 12 -10.54 -2.41 38 -4.22 +8.43 64 0.00 +1.19 90 +4.22 -6.02 115 +10.77 +9.07 13 -10.54 -4.83 39 -4.22 +6.02 65 0.00 -1.19 91 +4.22 -8.43 116 +10.54 +4.83 14 -10.77 -9.07 40 -4.22 +3.61 66 0.00 -3.61 92 +4.22 -10.85 117 +10.54 +2.41 15 -8.43 +11.28 41 -4.22 +1.19 67 0.00 -6.02 93 +4.22 -13.26 118 +10.54 0.00 16 -8.43 +8.43 42 -4.22 -1.19 68 0.00 -8.43 94 +6.32 +12.60 119 +10.54 -2.41 17 -8.43 +6.02 43 -4.22 -3.61 69 0.00 -10.85 95 +6.32 +9.65 120 +10.54 -4.83 18 -8.43 +3.61 44 -4.22 -6.02 70 0.00 -14.10 96 +6.32 +7.24 121 +10.77 -9.07 19 -8.43 +1.19 45 -4.22 -8.43 71 +2.11 +12.07 97 +6.32 +4.83 122 +12.17 +7.09 20 -8.43 -1.19 46 -4.22 -10.85 72 +2.11 +9.65 98 +6.32 +2.41 123 +13.21 +4.83 21 -8.43 -3.61 47 -4.22 -13.26 73 +2.11 +7.24 99 +6.32 0.00 124 +13.87 +2.41 22 -8.43 -6.02 48 -2.11 +12.07 74 +2.11 +4.83 100 +6.32 -2.41 125 +14.10 0.00 23 -8.43 -8.43 49 -2.11 +9.65 75 +2.11 +2.41 101 +6.32 -4.83 126 +13.87 -2.41 24 -8.43 -10.85 50 -2.11 +7.24 76 +2.11 0.00 102 +6.32 -7.24 127 +13.21 -4.83 25 -6.32 +12.60 51 -2.11 +4.83 77 +2.11 -2.41 103 +6.32 -9.65 128 +12.17 -7.09 26 -6.32 +9.65 52 -2.11 +2.41 78 +2.11 -4.83 43 8T Series | Common Section 24 61 +Y -X +X -Y 44 Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y A +4.98 +12.70 P -6.58 -11.94 c +4.39 +9.22 q -9.96 -2.24 CC -3.33 -5.92 -3.53 B +7.98 +11.05 R -9.35 -9.93 d +7.24 +7.19 r -10.13 +1.17 DD -5.79 C +10.49 +8.71 S -11.53 -7.29 e +9.19 +4.45 s -9.19 +4.45 EE -6.78 -0.25 D +12.32 +5.84 T -12.98 -4.17 f +10.13 +1.17 t -7.24 +7.19 FF -6.02 +3.10 E +13.39 +2.57 U -13.61 -0.76 g +9.96 -2.24 u -4.39 +9.22 GG -3.73 +5.66 F +13.61 -0.76 V -13.39 +2.57 h +8.66 -5.41 v 0.00 +8.59 HH 0.00 +5.08 G +12.98 -4.17 W -12.32 +5.84 i +6.38 -7.98 w +3.73 +5.66 JJ +2.67 +2.39 H +11.53 -7.29 X -10.49 +8.71 j +3.38 -9.63 x +6.02 +3.10 KK +3.43 -1.04 J +9.35 -9.93 Y -7.98 -11.05 k 0.00 -10.21 y +6.78 -0.25 LL 0.00 -3.35 K +6.58 -11.94 Z -4.98 +12.10 m -3.38 -9.63 z +5.79 -3.53 MM -3.43 -1.04 L +3.40 -13.18 a -1.73 +11.53 n -6.38 -7.98 AA +3.33 -5.92 NN -2.67 +2.39 b +1.73 +11.53 p -8.66 -5.41 BB 0.00 -6.78 PP 0.00 0.00 M 0.00 -13.64 N -3.40 -13.18 8T Series | Common Section Cross reference list SOURIAU Designation Shell size Contact layout Orientation 8TX**X**X/X* MIL-DTL-38999 Series II Shell size Contact layout Orientation MSXXXXXX**X**X/X* NFC 93422 HE309 Shell size & Contact layout Orientation HE309XXX****X/X*XX Square flange receptacle 8T0**B**P/S* 8T0**F**P/S* 8T0**C**P/S* MS27472T**B**P/S* MS27472T**F**P/S* MS27472T**C**P/S* HE30900T****P/S*7M HE30900T****P/S*6M HE30900T****P/S*8M In line receptacle 8T1**B**P/S* 8T1**F**P/S* 8T1**C**P/S* - - Square flange receptacle not accepting backshells (rear mounting) 8T2**B**P/S* 8T2**F**P/S* 8T2**C**P/S* MS27508E**B**P/S* MS27508E**F**P/S* MS27508E**C**P/S* HE30905T****P/S*7M HE30905T****P/S*6M HE30905T****P/S*8M Square flange receptacle (rear mounting) 8T3**B**P/S* 8T3**F**P/S* 8T3**C**P/S* MS27497T**B**P/S* MS27497T**F**P/S* MS27497T**C**P/S* HE30903T****P/S*7M HE30903T****P/S*6M HE30903T****P/S*8M Square flange receptacle not accepting backshells 8T4**B**P/S* 8T4**F**P/S* 8T4**C**P/S* MS27499E**B**P/S* MS27499E**F**P/S* MS27499E**C**P/S* HE30902T****P/S*7M HE30902T****P/S*6M HE30902T****P/S*8M Plug with RFI shielding 8T5**B**P/S* 8T5**F**P/S* 8T5**C**P/S* MS27484T**B**P/S* MS27484T**F**P/S* MS27484T**C**P/S* HE309G6T****P/S*7M HE309G6T****P/S*6M HE309G6T****P/S*8M Plug without RFI shielding 8T6**B**P/S* 8T6**F**P/S* 8T6**C**P/S* MS27473T**B**P/S* MS27473T**F**P/S* MS27473T**C**P/S* HE30906T****P/S*7M HE30906T****P/S*6M HE30906T****P/S*8M Jam nut receptacle 8T7**B**P/S* 8T7**F**P/S* 8T7**C**P/S* MS27474T**B**P/S* MS27474T**F**P/S* MS27474T**C**P/S* HE30907T****P/S*7M HE30907T****P/S*6M HE30907T****P/S*8M Square flange receptacle not accepting backshells (rear milling) 8T10**B**P/S* 8T10**F**P/S* 8T10**C**P/S* - - Plug with RFI shielding not accepting backshells (rear milling) 8T15**B**P/S* 8T15**F**P/S* 8T15**C**P/S* - - Plug without RFI shielding not accepting backshells (rear milling) 8T16**B**P/S* 8T16**F**P/S* 8T16**C**P/S* - - Backshells 8TAB01A**W 8TAB01A**F M85049/27**W M85049/27**N - 45 8T SERIES (c) 2019 SOURIAU - SOURIAU is a registered trademark 8T Series Range Extension Box mount interconnect solutions ........................................................................... 48 Rack and panel ........................................................................................................ 48 microComp(R) Series.................................................................................................. 49 Double flange .......................................................................................................... 49 Integrated clinch nut or helicoils.............................................................................. 50 PC tail contacts without shoulder............................................................................. 50 8T Series | Range Extension Product range extension Box Mount Interconnect Solutions Box Interconnect Solutions: Inside/Outside. Anything you need - we can do! PCB terminations: . with many lengths and different types of plating. Shape of connector can be adapted: . to meet the board application as double flange receptacles. Receptacles with short shell: . to minimize space inside the box. Any customized design: . to make box mount easier when space is a constraint. Blindmate/hermetic/thin panel assembly solutions... See Box Mount Interconnect Solutions catalog on www.souriau.com Rack and Panel Sealed rack and panel for blind connection. A 100% scoop proof connector with quick connection in hard-to-reach areas. Blind connection: . Easy and fast connection without any coupling/uncoupling between a float-mounting unit & a fixed unit. Float-mounting unit - rack: . Female crimp contacts. . Mounting on the cabinet side. . Angular orientation with a key. . Possibility to supply rear accessories. Misalignment catching: . Longitudinal, axial and angular. See 38999 Series I - 8LT Series Rack & Panel datasheet on www.souriau.com 48 8T Series | Range Extension Product range extension micro Comp(R) Series To respond to miniaturization and weight saving trends in aeronautical and defense applications SOURIAU has developed an innovative high density connector range. Very light & high density: . Shell in composite (or aluminum). . Up to 66% lighter than HD D-Sub. . Very high density up to 40% smaller than HD D-Sub. Excellent features: . With crimp removable contacts for wire AWG 24 to 28 . Temperature up to 175C . High vibration and shock withstanding . Standard MIL-STD 83513 accessories . Compatible with high speed data rates (Gigabit Ethernet...) Quick connect version for harsh environment: . 104 contacts push-push See microComp(R) Series - Miniature High Density datasheet on www.souriau.com Double Flange Double flange solution for PCB mount. Specially designed for PCB applications in harsh environments, decoupling vibration from the board. Excellent mechanical performance: . Standoffs integrated into the connector. . No risk of breaking contacts and no risk of micro-cuts. Design flexibility: . Square flange or Jam nut versions available. . Versatile contact length options. A wide range: . Available in aluminum with a range of layouts from shell size 9 to 25. User friendly: . Easy to assemble & time saving. See 38999 Series III - Double Flange datasheet on www.souriau.com 49 8T Series | Range Extension Product range extension Integrated Clinch Nut or Helicoils Integrated clinch nut solution for box mount. Equivalent mounting retention of the receptacle ensured with only 4 clinch nuts. Designed for severe applications. User friendly: . Easy to install. Selflocking: . Fast and secure. Reduced mounting hardware: . Elimination of nuts and washers. Foreign Object Debris reduction See 38999 Series III - Clinch Nut or Helicoils datasheet on www.souriau.com PC Tail Contacts without Shoulder Pin & socket PCB contacts without shoulder #22D and #20 as per MIL-DTL-38999 Series I, II & III. Contacts without shoulder allows a more flexible mounting on variable PCB thicknesses or depths. Ruggedized contacts: . Material: copper alloy . Finish: gold per MIL-G-45204 type I class 1 over nickel plate . Sleeve: stainless steel Flexible mounting: . Various PCB thicknesses. . Multiple PCB positioning. See PCB contacts without shoulder datasheet on www.souriau.com 50 10-31-1299 Promoting sustainable forest management www.pefc.org www.souriau.com technical.emear@souriau.com (Europe - Asia - Africa) technical.americas@souriau.com (North America) Our contribution to environmental protection: This catalog is printed on PEFC certified paper Advancement of sustainable wood cultivation. www.pefc.org WCA8TWUSEN06 (c) Copyright SOURIAU May 2019 - SOURIAU is a registered trademark Your local contact All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing. Reliable People, Reliable Solutions