#2
#1 #3
CLOCKWISE
PV37W
Part Number Power Rating
(W)
Number of Turns
(Effective Rotation Angle) Total Resistance Value TCR
(ppm/°C)
PV37W100C01B00 0.25 (85 °C) 12 10 ohm ±10 % ±150
PV37W101C01B00 0.25 (85 °C) 12 100 ohm ±10 % ±150
PV37W201C01B00 0.25 (85 °C) 12 200 ohm ±10 % ±150
PV37W501C01B00 0.25 (85 °C) 12 500 ohm ±10 % ±150
PV37W102C01B00 0.25 (85 °C) 12 1k ohm ±10 % ±150
PV37W202C01B00 0.25 (85 °C) 12 2k ohm ±10 % ±150
PV37W502C01B00 0.25 (85 °C) 12 5k ohm ±10 % ±150
PV37W103C01B00 0.25 (85 °C) 12 10k ohm ±10 % ±150
PV37W203C01B00 0.25 (85 °C) 12 20k ohm ±10 % ±150
PV37W253C01B00 0.25 (85 °C) 12 25k ohm ±10 % ±150
PV37W503C01B00 0.25 (85 °C) 12 50k ohm ±10 % ±150
PV37W104C01B00 0.25 (85 °C) 12 100k ohm ±10 % ±150
PV37W204C01B00 0.25 (85 °C) 12 200k ohm ±10 % ±150
PV37W254C01B00 0.25 (85 °C) 12 250k ohm ±10 % ±150
PV37W504C01B00 0.25 (85 °C) 12 500k ohm ±10 % ±150
PV37W105C01B00 0.25 (85 °C) 12 1M ohm ±10 % ±150
Operating Temperature Range: -55 to +125 °C
PV37 Series
Top Adjustment
Trimmer Potentiometers
Soldering Method: Wave (Single and Dual)
PV37.pdf
12/19/17
Features
2. Available in both top and side adjustment
1. Multiturn / Cermet / Sealed
4. Standoffs allow thorough PC board washing
5. RoHS compliant*
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
.46 ±.03
(.018 ±.001)
1 2 3
.46 ± .13
(.018 ± .005)
TYP.
6.71 ± .38
(.264 ± .015)
4.50 ± .38**
(.177 ± .015)
4.88 ± .51**
(.192 ± .020)
7.24 ± .51
(.285 ± .020) TYP.**
1.22 ± .25
(.048 ± .010)
.76**
(.030)
1.02
(.040)
2.54
(.100)
2.54
(.100)
2.54
(.100)
1.27 ± .25**
(.050 ± .010)
DIA.**
ADJ. SLOT
1.78
(.070)
.51
(.020)
.64
(.025)
WIDE
X
XDEEP
DIA.
#2
#1 #3
CLOCKWISE
PV37X
1.27 ± .25
(.050 ± .010)
.46 ± .13
(.018 ± .005)
1 2 3 1.22 ± .25
(.048 ± .010)
1.02
(.040)
1.02
(.040)
2.54
(.100) 2.54
(.100)
2.54
(.100)
.76
(.030)
TOLERANCES: ± 0.25 EXCEPT WHERE NOTED
(.010)
DIMENSIONS: MM
(INCHES)
6. For trimmer applications/processing guidelines,
click here
Lead Sealed Type Multiturn PV37 Series
COMMON DIMENSIONS**
3. Units can be pre-adjusted at clockwise, counter-clockwise
or standard 50 % position
Part Number Power Rating
(W)
Number of Turns
(Effective Rotation Angle) Total Resistance Value TCR
(ppm/°C)
PV37X100C01B00 0.25 (85 °C) 12 10 ohm ±10 % ±150
PV37X101C01B00 0.25 (85 °C) 12 100 ohm ±10 % ±150
PV37X201C01B00 0.25 (85 °C) 12 200 ohm ±10 % ±150
PV37X501C01B00 0.25 (85 °C) 12 500 ohm ±10 % ±150
PV37X102C01B00 0.25 (85 °C) 12 1k ohm ±10 % ±150
PV37X202C01B00 0.25 (85 °C) 12 2k ohm ±10 % ±150
PV37X502C01B00 0.25 (85 °C) 12 5k ohm ±10 % ±150
PV37X103C01B00 0.25 (85 °C) 12 10k ohm ±10 % ±150
PV37X203C01B00 0.25 (85 °C) 12 20k ohm ±10 % ±150
PV37X253C01B00 0.25 (85 °C) 12 25k ohm ±10 % ±150
PV37X503C01B00 0.25 (85 °C) 12 50k ohm ±10 % ±150
PV37X104C01B00 0.25 (85 °C) 12 100k ohm ±10 % ±150
PV37X204C01B00 0.25 (85 °C) 12 200k ohm ±10 % ±150
PV37X254C01B00 0.25 (85 °C) 12 250k ohm ±10 % ±150
PV37X504C01B00 0.25 (85 °C) 12 500k ohm ±10 % ±150
PV37X105C01B00 0.25 (85 °C) 12 1M ohm ±10 % ±150
Operating Temperature Range: -55 to +125 °C
(3) (1)
(2)
Standard Mounting Holes
PV37W/PV37X
Side Adjustment
ΔTR : ±1%
ΔV.S.S.: ±1%
ΔTR : ±2%
IR : 100M ohm min.
ΔTR : ±1%
ΔV.S.S.: ±1%
ΔTR : ±1%
ΔV.S.S.: ±1%
ΔTR : ±2%
ΔV.S.S.: ±1%
ΔTR : ±1%
ΔV.S.S.: ±1%
ΔTR : ±2%
ΔV.S.S.: ±1%
ΔTR : RV100 ohm ... ±3%
RG100 ohm ... ±2% (200 cycles)
Temperature Cycle
Humidity
Vibration (20G)
Shock (100G)
Temperature
Load Life
Low Temperature
Exposure
High Temperature
Exposure
Rotational Life
ΔTR : Total Resistance Change
ΔV.S.S.: Voltage Setting Stability
IR : Insulation Resistance
R : Standard Total Resistance
Characteristics
PV37.pdf
12/19/17
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do
vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Soldering Method: Wave (Single and Dual)
Part Numbering PV 37 W 103 C01 B00
Product ID
PV = Trimming Potentiometer
Series
37 = Lead Sealed 6 mm Square 12-Turns
Adjustment Direction/Lead Type
W = Top, Triangle
X = Side, Triangle
Total Resistance
Expressed by three figures.
The first and second figures are significant digits;
the third figure expresses the number of zeros
that follow.
Individual Specification
C01 = Standard Type
Packaging
Resistance Resistance
(Ohms) Code
10 100
100 101
200 201
500 501
1,000 102
2,000 202
5,000 502
10,000 103
20,000 203
25,000 253
50,000 503
100,000 104
200,000 204
250,000 254
500,000 504
1,000,000 105
Popular distribution resistance values listed in
boldface. Special resistances available.
B00 = Tube (50 pcs. per tube)
2.5
(.098)
2.5
(.098)
2.5
(.098)
0.9
(.035)
3 PLCS.
MM
(INCHES)
DIMENSIONS:
0.1
(.004)
TOLERANCES: ±
EXCEPT WHERE NOTED
Typical Part Marking
3-Digit Date Code and Manufacturing Code
- First digit indicates year of manufacture;
Resistance Code
- Resistance code marking as shown in the
Part Numbering Resistance Table.
- Last two digits indicate week of manufacture;
- 4th digit is suffix for manufacturing location:
C = Costa Rica
Example:
604C = Manufactured in 2016, week 4, Costa Rica
