NC7SZ19P6X - APTINA IMAGING - Datasheet.Directory

 Semiconductor Components Industries, LLC, 1999

July, 2019 − Rev. 2

1Publication Order Number:

NC7SZ19/D

NC7SZ19

TinyLogic UHS 1-of-2

Decoder / Demultiplexer

Description

The NC7SZ19 is a 1−of−2 decoder with a common output enable.

The device is fabricated with advanced CMOS technology to achieve

ultra−high speed with high output drive while maintaining low static

power dissipation over a broad VCC operating range. The device is

specified to operate over the 1.65 V to 5.5 V VCC range. The inputs

and outputs are high impedance when VCC is 0 V. Inputs tolerate

voltages up to 5.5 V independent of VCC operating voltage.

Features

•Ultra High−Speed: tPD 2.7 ns Typical at 5 V VCC

•Broad VCC Operating Range: 1.65 V to 5.55 V

•Power Down High Impednce Inputs / Outputs

•Over−Voltage Tolerance Inputs Facilitate 5 V to 3 V Translation

•Proprietary Noise / EMI Reduction Circuitry

•Ultra−Small MicroPak Packages

•These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS

Compliant

See detailed ordering, marking and shipping information in the

package dimensions section on page 5 of this data sheet.

ORDERING INFORMATION

MARKING

DIAGRAMS

www.onsemi.com

SC−88

(SC−70 6 Lead)

1.25x2

CASE 419AD−01

SIP6 1.45x1.0

CASE 127EB

UDFN6

1.0X1.0, 0.35P

CASE 517DP

B4KK

XYZ

B4KK

XYZ

B4, Z19 = Specific Device Code

KK = 2−Digit Lot Run Traceability Code

XY = 2−Digit Date Code Format

Z = Assembly Plant Code

= Year Coding Scheme

= Plant Code Identifier

T = Die Run Code

= Eight−Week Datacoding Scheme

Z19T

Pin 1

NC7SZ19

www.onsemi.com

Pin Configurations

NOTES:

1. AAA represents product code top mark (see Ordering Information).

2. Orientation of top mark determines pin one location.

3. Reading the top mark left to right, pin one is the lower left pin.

Figure 1. SC70 (Top View)

(Top View) AAA

Pin One

A 1 6 Y0

GND 2 5 VCC

E 3 4 Y1

GND VCC

E Y1

Figure 2. MicroPak (Top Through View)

Figure 3. Pin 1 Orientation

PIN DEFINITIONS

Pin # SC70 Pin # MicroPak Name Description

1 1 A Decoder Address /

Demultiplexer Select

2 2 GND Ground

3 3 /E Decoder Output Enable /

Demultiplexer Data

4 4 Y1 Output

5 5 VCC Supply Voltage

6 6 Y0 Output

FUNCTION TABLE

Inputs Output

A /E Y0 = A + /E Y1 = /A + /E

L L L H

H L H L

X H H H

H = HIGH Logic Level

L = LOW Logic Level

X = 3−STATE

NC7SZ19

www.onsemi.com

ABSOLUTE MAXIMUM RATINGS

Symbol Parameter Min Max Unit

VCC Supply Voltage −0.5 6.5 V

VIN DC Input Voltage −0.5 6.5 V

VOUT DC Output Voltage −0.5 6.5 V

IIK DC Input Diode Current VIN < 0.5 V − −50 mA

IOK DC Output Diode Current VOUT < −0.5 V − −50 mA

IOUT DC Output Current −±50 mA

ICC or IGND DC VCC or Ground Current −±100 mA

TSTG Storage Temperature Range −65 +150 °C

TJJunction Temperature Under Bias −+150 °C

TLJunction Lead Temperature (Soldering, 10 Seconds) −+260 °C

PDPower Dissipation at +85°CSC70−6−190 mW

MicroPak−6−327

MicroPak2−6−327

ESD Human Body Model, JEDEC: JESD22−A114 −4000 V

Charge Device Model, JEDEC: JESD22−C101 −2000

Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality

should not be assumed, damage may occur and reliability may be affected.

RECOMMENDED OPERATING CONDITIONS

Symbol Parameter Conditions Min Max Unit

VCC Supply Voltage Operating 1.65 5.50 V

Supply Voltage Data Retention 1.5 5.5

VIN Input Voltage 0 5.5 V

VOUT Output Voltage 0 VCC V

tr, tfInput Rise and Fall Times VCC at 1.8 V ±0.15 V, 2.5 V ±0.2 V 0 20 ns/V

VCC at 3.3 V ±0.3 V 0 10

VCC at 5.0 V ±0.5 V 0 5

TAOperating Temperature −40 +85 °C

qJA Thermal Resistance SC70−6−659 °C/W

MicroPak−6−382

MicroPak2−6−382 °C/W

Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond

the Recommended Operating Ranges limits may affect device reliability.

NC7SZ19

www.onsemi.com

DC ELECTICAL CHARACTERISTICS

Symbol Parameter VCC (V) Conditions

TA = +25°C TA = −40 to +85°C

Unit

Min Typ Max Min Max

VIH HIGH Level Input Voltage 1.65 0.65 VCC − − 0.65 VCC −V

2.30 to 5.50 0.70 VCC − − 0.70 VCC −

VIL LOW Level Input Voltage 1.65 − − 0.35 VCC −0.35 VCC V

2.30 to 5.50 − − 0.30 VCC −0.30 VCC

VOH HIGH Level Output Voltage 1.65 VIN = VIH, or VOL,

IOH = −100 mA

1.55 1.65 −1.55 −V

2.30 2.20 2.30 −2.20 −

3.00 2.90 3.00 −2.90 −

4.50 4.40 4.50 −4.40 −

1.65 IOH = −4 mA 1.29 1.52 −1.29 −

2.30 IOH = −8 mA 1.90 2.15 −1.90 −

3.00 IOH = −16 mA 2.40 2.80 −2.40 −

3.00 IOH = −24 mA 2.30 3.68 −2.30 −

4.50 IOH = −32 mA 3.80 4.20 −3.80 −

VOL LOW Level Output Voltage 1.65 VIN = VIL, or VIH,

IOL = 100 mA

−0.00 0.10 −0.10 V

2.30 −0.00 0.10 −0.10

3.00 −0.00 0.10 −0.10

4.50 −0.00 0.10 −0.10

1.65 IOL = 4 mA −0.08 0.24 −0.24

2.30 IOL = 8 mA −0.10 0.30 −0.30

3.00 IOL = 16 mA −0.15 0.40 −0.40

3.00 IOL = 24 mA −0.22 0.55 −0.55

4.50 IOL = 32 mA −0.22 0.55 −0.55

IIN Input Leakage Current 1.65 to 5.5 VIN = 5.5 V, GND − − ±0.1 −±1.0 mA

IOFF Power Off Leakage Current 0 VIN or VOUT = 5.5 V − − 1−10 mA

ICC Quiescent Supply Current 1.65 to 5.50 VIN = 5.5 V, GND − − 1−10 mA

AC ELECTRICAL CHARACTERISTICS

Symbol Parameter VCC (V) Conditions

TA = +25°C TA = −40 to +85°C

Unit

Min Typ Max Min Max

tPLH, tPHL Propagation Delay A or /E to Output

(Figure 5, 6)

1.80 ±0.15 CL = 15 pF,

RL = 1 MW

−5.9 10.5 −11.0 ns

2.50 ±0.20 −3.5 6.0 −6.4

3.30 ±0.30 −2.7 4.1 −4.5

5.00 ±0.50 −2.1 3.2 −3.5

3.30 ±0.30 CL = 50 pF,

RL = 500 W

−3.2 5.1 −5.4 ns

5.00 ±0.50 −2.7 4.0 −4.3

CIN Input Capacitance 0−2.3 −−−pF

CPD Power Dissipation Capacitance

(Note 4) (Figure 5)

3.30 −10.5 −−−pF

5.00 −12.8 −−−

4. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at

no output loading and operating at 50% duty cycle. CPD is related to ICCD dynamic operating current by the expression:

ICCD = (CPD) (VCC) (fIN) + (ICCstatic).

NC7SZ19

www.onsemi.com

AC Loading and Waveforms

NOTES:

5. CL includes load and stray capacitance.

6. Input PRR = 1.0 MHz, tW = 500 ns.

Figure 4. AC Test Circuit

INPUT

VCC

Figure 5. ICCD Test Circuit

CLRL

OUTPUT

Figure 6. AC Waveforms

tr = 3 ns

50%

90%

10%

90%

10%

INPUT

Out of Phase

OUTPUT

In Phase

OUTPUT

tf = 3 ns

VCC

GND

VOH

VOL

VOH

VOL

50%

tPHL tPLH

tPLH tPHL

INPUT

NOTE:

7. Input = AC Waveform; tr = tf = 1.8 ns.

8. PRR = 10 MHz; Duty Cycle = 50%.

9. /E Input = GND.

VCC

ORDERING INFORMATION

Device Top Mark Packages Shipping†

NC7SZ19P6X Z19 6−Lead SC70, EIAJ SC88, 1.25 mm Wide 3000 / Tape & Reel

NC7SZ19L6X B4 6−Lead MicroPak, 1.00 mm Wide 5000 / Tape & Reel

NC7SZ19FHX B4 6−Lead, MicroPak2, 1x1 mm Body, .35 mm Pitch 5000 / Tape & Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

MicroPak and MicroPak2 are trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other

countries.

SIP6 1.45X1.0

CASE 127EB

ISSUE O

DATE 31 AUG 2016

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

98AON13590G

DOCUMENT NUMBER:

DESCRIPTION:

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

PAGE 1 OF 1

SIP6 1.45X1.0

SC−88/SC70−6/SOT−363

CASE 419B−02

ISSUE Y

DATE 11 DEC 2012

SCALE 2:1

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.

2. CONTROLLING DIMENSION: MILLIMETERS.

3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH,

PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRU-

SIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER END.

4. DIMENSIONS D AND E1 AT THE OUTERMOST EXTREMES OF

THE PLASTIC BODY AND DATUM H.

5. DATUMS A AND B ARE DETERMINED AT DATUM H.

6. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE

LEAD BETWEEN 0.08 AND 0.15 FROM THE TIP.

7. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION.

ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN

EXCESS OF DIMENSION b AT MAXIMUM MATERIAL CONDI-

TION. THE DAMBAR CANNOT BE LOCATED ON THE LOWER

RADIUS OF THE FOOT.

Cddd M

123

654

XXXMG

XXX = Specific Device Code

M = Date Code*

G= Pb−Free Package

GENERIC

MARKING DIAGRAM*

STYLES ON PAGE 2

DIM MIN NOM MAX

MILLIMETERS

A−−− −−− 1.10

A1 0.00 −−− 0.10

ddd

b0.15 0.20 0.25

C0.08 0.15 0.22

D1.80 2.00 2.20

−−− −−− 0.043

0.000 −−− 0.004

0.006 0.008 0.010

0.003 0.006 0.009

0.070 0.078 0.086

MIN NOM MAX

INCHES

0.10 0.004

E1 1.15 1.25 1.35

e0.65 BSC

L0.26 0.36 0.46

2.00 2.10 2.20

0.045 0.049 0.053

0.026 BSC

0.010 0.014 0.018

0.078 0.082 0.086

(Note: Microdot may be in either location)

*Date Code orientation and/or position may

vary depending upon manufacturing location.

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and

Mounting Techniques Reference Manual, SOLDERRM/D.

SOLDERING FOOTPRINT*

0.65

0.66

DIMENSIONS: MILLIMETERS

0.30

PITCH

2.50

RECOMMENDED

TOP VIEW

SIDE VIEW END VIEW

bbb H

SEATING

PLANE

DETAIL A E

A2 0.70 0.90 1.00 0.027 0.035 0.039

L2 0.15 BSC 0.006 BSC

aaa 0.15 0.006

bbb 0.30 0.012

ccc 0.10 0.004

A-B D

aaa C

2X 3 TIPS

aaa H D

PLANE

DETAIL A

GAGE

ccc C

*This information is generic. Please refer to

device data sheet for actual part marking.

Pb−Free indicator, “G” or microdot “G”, may

or may not be present. Some products may

not follow the Generic Marking.

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

98ASB42985B

DOCUMENT NUMBER:

DESCRIPTION:

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

PAGE 1 OF 2

SC−88/SC70−6/SOT−363

STYLE 1:

PIN 1. EMITTER 2

2. BASE 2

3. COLLECTOR 1

4. EMITTER 1

5. BASE 1

6. COLLECTOR 2

STYLE 3:

CANCELLED

STYLE 2:

CANCELLED

STYLE 4:

PIN 1. CATHODE

2. CATHODE

3. COLLECTOR

4. EMITTER

5. BASE

6. ANODE

STYLE 5:

PIN 1. ANODE

2. ANODE

3. COLLECTOR

4. EMITTER

5. BASE

6. CATHODE

STYLE 6:

PIN 1. ANODE 2

2. N/C

3. CATHODE 1

4. ANODE 1

5. N/C

6. CATHODE 2

STYLE 7:

PIN 1. SOURCE 2

2. DRAIN 2

3. GATE 1

4. SOURCE 1

5. DRAIN 1

6. GATE 2

STYLE 8:

CANCELLED

STYLE 11:

PIN 1. CATHODE 2

2. CATHODE 2

3. ANODE 1

4. CATHODE 1

5. CATHODE 1

6. ANODE 2

STYLE 9:

PIN 1. EMITTER 2

2. EMITTER 1

3. COLLECTOR 1

4. BASE 1

5. BASE 2

6. COLLECTOR 2

STYLE 10:

PIN 1. SOURCE 2

2. SOURCE 1

3. GATE 1

4. DRAIN 1

5. DRAIN 2

6. GATE 2

STYLE 12:

PIN 1. ANODE 2

2. ANODE 2

3. CATHODE 1

4. ANODE 1

5. ANODE 1

6. CATHODE 2

STYLE 13:

PIN 1. ANODE

2. N/C

3. COLLECTOR

4. EMITTER

5. BASE

6. CATHODE

STYLE 14:

PIN 1. VREF

2. GND

3. GND

4. IOUT

5. VEN

6. VCC

STYLE 15:

PIN 1. ANODE 1

2. ANODE 2

3. ANODE 3

4. CATHODE 3

5. CATHODE 2

6. CATHODE 1

STYLE 17:

PIN 1. BASE 1

2. EMITTER 1

3. COLLECTOR 2

4. BASE 2

5. EMITTER 2

6. COLLECTOR 1

STYLE 16:

PIN 1. BASE 1

2. EMITTER 2

3. COLLECTOR 2

4. BASE 2

5. EMITTER 1

6. COLLECTOR 1

STYLE 18:

PIN 1. VIN1

2. VCC

3. VOUT2

4. VIN2

5. GND

6. VOUT1

STYLE 19:

PIN 1. I OUT

2. GND

3. GND

4. V CC

5. V EN

6. V REF

STYLE 20:

PIN 1. COLLECTOR

2. COLLECTOR

3. BASE

4. EMITTER

5. COLLECTOR

6. COLLECTOR

STYLE 22:

PIN 1. D1 (i)

2. GND

3. D2 (i)

4. D2 (c)

5. VBUS

6. D1 (c)

STYLE 21:

PIN 1. ANODE 1

2. N/C

3. ANODE 2

4. CATHODE 2

5. N/C

6. CATHODE 1

STYLE 23:

PIN 1. Vn

2. CH1

3. Vp

4. N/C

5. CH2

6. N/C

STYLE 24:

PIN 1. CATHODE

2. ANODE

3. CATHODE

4. CATHODE

5. CATHODE

6. CATHODE

STYLE 25:

PIN 1. BASE 1

2. CATHODE

3. COLLECTOR 2

4. BASE 2

5. EMITTER

6. COLLECTOR 1

STYLE 26:

PIN 1. SOURCE 1

2. GATE 1

3. DRAIN 2

4. SOURCE 2

5. GATE 2

6. DRAIN 1

STYLE 27:

PIN 1. BASE 2

2. BASE 1

3. COLLECTOR 1

4. EMITTER 1

5. EMITTER 2

6. COLLECTOR 2

STYLE 28:

PIN 1. DRAIN

2. DRAIN

3. GATE

4. SOURCE

5. DRAIN

6. DRAIN

STYLE 29:

PIN 1. ANODE

2. ANODE

3. COLLECTOR

4. EMITTER

5. BASE/ANODE

6. CATHODE

SC−88/SC70−6/SOT−363

CASE 419B−02

ISSUE Y

DATE 11 DEC 2012

STYLE 30:

PIN 1. SOURCE 1

2. DRAIN 2

3. DRAIN 2

4. SOURCE 2

5. GATE 1

6. DRAIN 1

Note: Please refer to datasheet for

style callout. If style type is not called

out in the datasheet refer to the device

datasheet pinout or pin assignment.

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

98ASB42985B

DOCUMENT NUMBER:

DESCRIPTION:

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

PAGE 2 OF 2

SC−88/SC70−6/SOT−363

UDFN6 1.0X1.0, 0.35P

CASE 517DP

ISSUE O

DATE 31 AUG 2016

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

98AON13593G

DOCUMENT NUMBER:

DESCRIPTION:

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

PAGE 1 OF 1

UDFN6 1.0X1.0, 0.35P

www.onsemi.com

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

TECHNICAL SUPPORT

North American Technical Support:

Voice Mail: 1 800−282−9855 Toll Free USA/Canada

Phone: 011 421 33 790 2910

LITERATURE FULFILLMENT:

Email Requests to: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Europe, Middle East and Africa Technical Support:

Phone: 00421 33 790 2910

For additional information, please contact your local Sales Representative

◊