TOSHIBA TLG336S,TLG3375S,TLS336S,TLS337S,TLR336S,TLR3375S TOSHIBA LED LAMP TLG336S, TLG337S, TLS336S TLS337S, TLR336S, TLR337S @ 8.0mm (0.3) Character Height Numerical Display. e Application : Numerical Readout for Instrument and Consumer Product. @ Luminous Intensity Ranking Performed Uniform Display. e Available Both Type of Package Colors. TLU xxxS : Gray Color Coated Only on Surface. TLU xxxT : Black Color Coated Only on Surface. PRODUCT LINE UP TLG3368 /TLG3378 GaP GREEN TLS336S / TLS3378 GaAsP RED TLR3368 / TLR3378 GaP RED TYPE No. vs FULLY DISPLAY FONT COMMON CATHODE COMMON ANODE FULLY DISPLAY FONT TLG336S TLG3378 TLS3368 TLS3378 TLR3368 TLR3378 oO MAXIMUM RATINGS (Ta = 25C) CHARACTERISTIC SYMBOL RATING UNIT DC Forward Current/seg. Ip (DC) /seg 20 mA Pulse Forward Current /seg. (Note) Ipp/seg 110 mA Reverse Voltage /seg. VR 6 Vv Operating Temperature Range Topr 40~85 C Storage Temperature Range T stg 40~85 C Note : Pulse Width=1ms, Duty Ratio=1/10 961001EAC2 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. @ Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 1997-03-03 1/5TOSHIBA TLG336S,TLG3375S,TLS336S,TLS337S,TLR336S,TLR3375S ELECTRICAL-OPTICAL CHARACTERISTICS (Ta = 25C) LUMINOUS REVERSE |LUMINOUS TYPE No. Iy/seg F/ Seg IR/seg RATIO Iy_M Ap | AA |Ip/seg| Min. | Typ. |Ip/seg| Min. | Typ. | Max. |Ip/seg| Max. | VR/seg| Max. |Ip/seg TLG Series | 565 30 0.47 | 1.06 10 1.7 | 2.0 | 2.5 10 TLS Series 635 40 | 10 | 1.06 | 2.40 17/19 | 2.5 10 5 6 2.3 TLR Series 700 | 100 0.21/ 0.48] 5 14 | 2.0 | 2.5 5 UNIT nm mA med mA Vv mA | nA Vv | mA PRECAUTION Please be careful of the following. e Soldering temperature should be less than 260C for 3 seconds at 2.0mm from the seating plane. 1997-03-03 2/5TOSHIBA TLG336S,TLG3375S,TLS336S,TLS337S,TLR336S,TLR3375S Iy/seg Ip TLG Series omed} Iy/seg LUMINOUS INTENSITY med} ly /seg LUMINOUS INTENSITY Gmed} Iy/seg LUMINOUS INTENSITY 3 0.5 0.3 0.1 3 5 10 Ta=25C 30 50 FORWARD CURRENT Ip/seg (mA) TLR Series 3 0.5 0.3 0.1 3 5 10 Ta=25C 30 FORWARD CURRENT Ip/seg (mA) TLS Series 5 3 0.5 0.3 0.1 0.05 0.01 0.03 0.05 0.1 DUTY RATIO DR Ta=25C Pw=1ms 0.3 0.5 100 50 (med? Iy/seg LUMINOUS INTENSITY TLS Series 5 0.5 0.3 01 1 3. O46 10 30 50 100 FORWARD CURRENT Ip/seg (mA) Iy/seg DR TLG Series 5 (med? Iy/seg LUMINOUS INTENSITY (med) Iy/seg LUMINOUS INTENSITY 3 0.5 0.3 Ta=25C 0.1 Pw=lms 0.05 0.01 0.03 0.05 0.1 03 05 1 DUTY RATIO DR TLR Series 1 0.5 0.3 Ipp=100mA 0.1 0.05 0.03 0.01 0.03 0.05 0.1 03 0.5 1 DUTY RATIO DR 1997-03-03 3/5TOSHIBA TLG336S,TLG3375S,TLS336S,TLS337S,TLR336S,TLR3375S (mA) Ip/seg FORWARD CURRENT MAXIMUM FORWARD CURRENT Ip MAX/seg (mA) 24 16 16 IF/ 18 2.0 FORWARD seg VPF/seg TLG, TLRX xx @ TLSxxxs 22 24 26 28 3.0 VOLTAGE Vp/seg (V) Ip MAX/seg Ta 3.2 DIRECT CURRENT - PULSE CURRENT ~y FOR TLG AND TLS AND TLR af 120 80 40 40 80 120 AMBIENT TEMPERATURE Ta (C) 160 MAXIMUM PULSE FORWARD CURRENT (mA) 1/10, PULSE WIDTH Ipp/seg lms) (DUTY RATIO ly RELATIVE LUMINOUS INTENSITY MAXIMUM PULSE FORWARD CURRENT Ipp/seg (mA) =20 0 20 Iy - Tec FOR TLG AND TLS AND TLR 40 60 80 100 CASE TEMPERATURE Te (C) Ipp/seg DR 120 40 0 0.1 Ta =25C Pw=1ms N 80 AN PS A um FOR TLG AND TLS AND TLR 0.3 0.5 1 2 DUTY RATIO DR 1997-03-03 4/5TOSHIBA TLG336S,TLG3375S,TLS336S,TLS337S,TLR336S,TLR3375S OUTLINE DIMENSIONS PIN No.1 PIN No.10 o eee o + aS o TO a | oo re y re wo 5.040.3 + 4540.5 7.00.3 Weight : 0.57 Unit in mm Tolerance is 0.25 Unless otherwise noted. 0.25 TOSHIBA 4-7A1 5.340.388 PIN CONNECTION 3836S Series 8378 Series 9 6 9 6 A B CODE F G Dp A B CD E F G Dp 11085 42 3 7% 1108 5 42 3 7% PIN No. CONNECTION PIN No. CONNECTION 1 Anode A 1 Cathode A 2 Anode F 2 Cathode F 3 Anode G 3 Cathode G 4 Anode E 4 Cathode E 5 Anode D 5 Cathode D 6 Cathode Dp (Right Hand) 6 Cathode Dp (Right Hand) 7 Anode Dp (Right Hand) 7 Anode Dp (Right Hand) 8 Anode C 8 Cathode C 9 Common Cathode 9 Common Anode 10 Anode B 10 Cathode B 1997-03-03 5/5