29
Radial Leads/Ceralam®
1.14 (.045)
Max.
W
W
L
L
T
T
L.D.
L.D.
L.S.
L.S.
31.7 (1.25)
Min.
31.7 (1.25)
Min.
Style MR05
Styles MR04, MR06,
MR07, MR08
Dimensions: Millimeters (Inches)
GENERAL INFORMATION
MARKING PACKAGING REQUIREMENTS
HOW TO ORDER
MR05
AVX Style
MR04
MR05
MR06
MR07
MR08
1
Voltage
5 = 50V
1 = 100V
2 = 200V
A
Dielectric
A = C0G (NP0)
C = X7R
E = Z5U
561
Capacitance
First two digits are the significant
figures of capacitance. Third digit
indicates the additional number
of zeros. For example, order
100,000 pF as 104. (For values
below 10pF use “R” in place of
decimal point, e.g., 1R4 = 1.4pF.)
J
Capacitance
Tolerance
C0G (NP0):
D = ±.5pF
(>10pF only)
F = ±1%
(>50pF only)
G = ±2%
(>25pF only)
J = ±5%
K = ±10%
X7R:
J = ±5%
K = ±10%
M = ±20%
Z5U:
M = ±20%
Z = +80%
-20%
A
Failure Rate
A = Not Applicable
T = CECC
A
Leads
A = Standard
Solderable (SnPb)
T1= Trimmed Leads
.230" ± .030"
AVX MR Series
Molded Radial Leaded MLC
Temperature Coefficients: C0G (NP0), X7R, Z5U
50, 100, 200 Volts
Case Material: Molded Epoxy
Lead Material: Solderable
Marking is as size permits.
(For code identification, see HOW TO ORDER section.)
— AVX
— Capacitance Tolerance
— Voltage Rating
— Temperature Coefficient
— Date Code
— Lot Code
Bulk Packaging: 1000 pcs. per sealed package except
MR07/MR08 (300 pcs.).
Tape and Reel: Available on MR04, MR05, and MR06
only (2500 pcs./reel).
Ammo Packaging: Available on special request.
1Trimmed lead length for the MR05 style will be measured from the bend in the lead (seating plane).
Not RoHS Compliant
30
Radial Leads/Ceralam®
C0G (NP0)
Dimensions: Millimeters (Inches)
*
Length, width and thickness dimensions are ±.254 mm (±.010"). Lead diameter is ±.05 mm (±.002"). Lead spacing is ±.381 mm (±.015").
= Industry preferred values
AVX Style MR04 MR05 MR06 MR07 MR08
Length* 4.83 (.190") 4.83 (.190") 7.36 (.290") 12.44 (.490") 12.44 (.490")
Width* 4.83 (.190") 4.83 (.190") 7.36 (.290") 12.44 (.490") 12.44 (.490")
Thickness* 2.28 (.090") 2.28 (.090") 2.28 (.090") 3.55 (.140") 6.09 (.240")
Lead Spacing* 2.54 (.100") 5.08 (.200") 5.08 (.200") 10.16 (.400") 10.16 (.400")
Lead Diameter* .635 (.025") .635 (.025") .635 (.025") .635 (.025") .635 (.025")
Cap. in Typical AVX WVDC WVDC WVDC WVDC WVDC
pF Part Nos.
1.0 MR-----5A1R0DAA
to
9.1 MR-----5A9R1DAA
10 MR-----5A100KAA
12 MR-----5A120KAA
15 MR-----5A150KAA
18 MR-----5A180KAA
22 MR-----5A220KAA
27 MR-----5A270KAA
33 MR-----5A330KAA
39 MR-----5A390KAA
47 MR-----5A470KAA
56 MR-----5A560KAA
68 MR-----5A680KAA
82 MR-----5A820KAA
100 MR-----5A101KAA
120 MR-----5A121KAA
150 MR-----5A151KAA
180 MR-----5A181KAA
220 MR-----5A221KAA
270 MR-----5A271KAA
330 MR-----5A331KAA
390 MR-----5A391KAA
470 MR-----5A471KAA
560 MR-----5A561KAA
680 MR-----5A681KAA
820 MR-----5A821KAA
1000 MR-----5A102KAA
1200 MR-----5A122KAA
1500 MR-----5A152KAA
1800 MR-----5A182KAA
2200 MR-----5A222KAA
2700 MR-----5A272KAA
3300 MR-----5A332KAA
3900 MR-----5A392KAA
4700 MR-----5A472KAA
5600 MR-----5A562KAA
6800 MR-----5A682KAA
8200 MR-----5A822KAA
10,000 MR-----5A103KAA
12,000 MR-----5A123KAA
15,000 MR-----5A153KAA
18,000 MR-----5A183KAA
22,000 MR-----5A223KAA
27,000 MR-----5A273KAA
33,000 MR-----5A333KAA
39,000 MR-----5A393KAA
47,000 MR-----5A473KAA
56,000 MR-----5A563KAA
68,000 MR-----5A683KAA
82,000 MR-----5A823KAA
100,000 MR-----5A104KAA
120,000 MR-----5A124KAA
150,000 MR-----5A154KAA
For trimmed leads see “How To Order”.
For other tolerances see “How To Order”.
For other voltages see “How To Order”.
200 100 50 200 100 50 200 100 50 200 100 50 200 100 50
SIZE AND CAPACITANCE SPECIFICATIONS
31
Radial Leads/Ceralam®
X7R
Dimensions: Millimeters (Inches)
*
Length, width and thickness dimensions are ±.254 mm (±.010"). Lead diameter is ±.05 mm (±.002"). Lead spacing is ±.381 mm (±.015").
= Industry preferred values
For trimmed leads see “How To Order”.
For other tolerances see “How To Order”.
For other voltages see “How To Order”.
AVX Style MR04 MR05 MR06 MR07 MR08
Length* 4.83 (.190") 4.83 (.190") 7.36 (.290") 12.44 (.490") 12.44 (.490")
Width* 4.83 (.190") 4.83 (.190") 7.36 (.290") 12.44 (.490") 12.44 (.490")
Thickness* 2.28 (.090") 2.28 (.090") 2.28 (.090") 3.55 (.140") 6.09 (.240")
Lead Spacing* 2.54 (.100") 5.08 (.200") 5.08 (.200") 10.16 (.400") 10.16 (.400")
Lead Diameter* .635 (.025") .635 (.025") .635 (.025") .635 (.025") .635 (.025")
Cap. in Typical AVX WVDC WVDC WVDC WVDC WVDC
pF Part Nos.
100 MR-----5C101KAA
120 MR-----5C121KAA
150 MR-----5C151KAA
180 MR-----5C181KAA
220 MR-----5C221KAA
270 MR-----5C271KAA
330 MR-----5C331KAA
390 MR-----5C391KAA
470 MR-----5C471KAA
560 MR-----5C561KAA
680 MR-----5C681KAA
820 MR-----5C821KAA
1000 MR-----5C102KAA
1200 MR-----5C122KAA
1500 MR-----5C152KAA
1800 MR-----5C182KAA
2200 MR-----5C222KAA
2700 MR-----5C272KAA
3300 MR-----5C332KAA
3900 MR-----5C392KAA
4700 MR-----5C472KAA
5600 MR-----5C562KAA
6800 MR-----5C682KAA
8200 MR-----5C822KAA
10,000 MR-----5C103KAA
12,000 MR-----5C123KAA
15,000 MR-----5C153KAA
18,000 MR-----5C183KAA
22,000 MR-----5C223KAA
27,000 MR-----5C273KAA
33,000 MR-----5C333KAA
39,000 MR-----5C393KAA
47,000 MR-----5C473KAA
56,000 MR-----5C563KAA
68,000 MR-----5C683KAA
82,000 MR-----5C823KAA
100,000 MR-----5C104KAA
120,000 MR-----5C124KAA
150,000 MR-----5C154KAA
180,000 MR-----5C184KAA
220,000 MR-----5C224KAA
270,000 MR-----5C274KAA
330,000 MR-----5C334KAA
390,000 MR-----5C394KAA
470,000 MR-----5C474KAA
560,000 MR-----5C564KAA
680,000 MR-----5C684KAA
820,000 MR-----5C824KAA
1.0 μF MR-----5C105KAA
1.2 μF MR-----5C125KAA
1.5 μF MR-----5C155KAA
1.8 μF MR-----5C185KAA
2.0 μF MR-----5C205KAA
2.2 μF MR-----5C225KAA
2.7 μF MR-----5C275KAA
3.3 μF MR-----5C335KAA
3.9 μF MR-----5C395KAA
4.7 μF MR-----5C475KAA
200 100 50 200 100 50 200 100 50 200 100 50 200 100 50
SIZE AND CAPACITANCE SPECIFICATIONS
32
Radial Leads/Ceralam®
Z5U
*Length, width and thickness dimensions are ±.254 mm (±.010"). Lead diameter is ±.05 mm (±.002"). Lead spacing is ±.381 mm (±.015).
= Industry preferred values
For trimmed leads see “How To Order”.
For other tolerances see “How To Order”.
For other voltages see “How To Order”.
AVX Style MR04 MR05 MR06 MR07 MR08
Length* 4.83 4.83 7.36 12.44 12.44
(.190") (.190") (.290") (.490") (.490")
Width* 4.83 4.83 7.36 12.44 12.44
(.190") (.190") (.290") (.490") (.490")
Thickness* 2.28 2.28 2.28 3.55 6.09
(.090") (.090") (.090") (.140") (.240")
Lead* 2.54 5.08 5.08 10.16 10.16
Spacing (.100") (.200") (.200") (.400") (.400")
Lead* .635 .635 .635 .635 .635
Diameter (.025") (.025") (.025") (.025") (.025")
Cap. in Typical AVX WVDC WVDC WVDC WVDC WVDC
pF Part Nos. 100 50 100 50 100 50 100 50 100 50
10,000 MR-----5E103ZAA
12,000 MR-----5E123ZAA
15,000 MR-----5E153ZAA
18,000 MR-----5E183ZAA
22,000 MR-----5E223ZAA
27,000 MR-----5E273ZAA
33,000 MR-----5E333ZAA
39,000 MR-----5E393ZAA
47,000 MR-----5E473ZAA
56,000 MR-----5E563ZAA
68,000 MR-----5E683ZAA
82,000 MR-----5E823ZAA
100,000 MR-----5E104ZAA
120,000 MR-----5E124ZAA
150,000 MR-----5E154ZAA
180,000 MR-----5E184ZAA
220,000 MR-----5E224ZAA
270,000 MR-----5E274ZAA
330,000 MR-----5E334ZAA
390,000 MR-----5E394ZAA
470,000 MR-----5E474ZAA
560,000 MR-----5E564ZAA
680,000 MR-----5E684ZAA
820,000 MR-----5E824ZAA
1.0 μF MR-----5E105ZAA
1.2 μF MR-----5E125ZAA
1.5 μF MR-----5E155ZAA
1.8 μF MR-----5E185ZAA
2.2 μF MR-----5E225ZAA
2.7 μF MR-----5E275ZAA
3.3 μF MR-----5E335ZAA
3.9 μF MR-----5E395ZAA
4.7 μF MR-----5E475ZAA
5.6 μF MR-----5E565ZAA
6.8 μF MR-----5E685ZAA
8.2 μF MR-----5E825ZAA
10.0 μF MR-----5E106ZAA
Dimensions: Millimeters (Inches)
SIZE AND CAPACITANCE SPECIFICATIONS
27
SkyCap®
Configurations by Lead Spacing
LEAD SPACING .100 ±.030
Dimensions: Inches (Millimeters)
AR07/SR07* AR14/SR14 AR15/SR15* AR20/SR20*
(T=.100) (T=.100) (T=.100) (T=.125)
AR29/SR29* AR62/SR62* SR62-LP*
(T=.125) (T=.125) (T=.100)
LEAD SPACING .200 ±.030
Dimensions: Inches (Millimeters)
AR12/SR12* SR13* AR21/SR21* SR21-85* SR28*
(T=.100) (T=.125) (T=.125) (T=.125) (T=.125)
AR30/SR30* SR30-LP* AR32/SR32* AR40/SR40* AR59/SR59*
(T=.150) (T=.150) (T=.150) (T=.150) (T=.125)
SR61 SR63* SR64* SR64-LP* AR65/SR65*
(T=.150) (T=.150) (T=.150) (T=.150) (T=.150)
.250 (6.35) Max.
Meniscus Free
.031 (.787) Above
Seating Plane
.200 (5.08) Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
.200 (5.08) Max.
.300 (7.62)
Max.
.100 (2.54) ±.030
.230 (5.84) ±.030
Meniscus Free
.031 (.787) Above
Seating Plane
.150 (3.81) Max.
.150 (3.81) Max.
1.0 (25.4) Min.
.100 (2.54) ±.030
.060 (1.52)
Max.
.150 (3.81) Max.
.250 (6.35)
Max.
1.0 (25.4) Min.
.100 (2.54) ±.030
.050 (1.27)
Clean Above
Seating Plane
.200 (5.08) Max.
.200 (5.08) Max.
1.0 (25.4) Min.
.100 (2.54) ±.030
.060 (1.52)
Max.
.150 (3.81) Max.
.230 (5.84) Max.
.150 (3.81)
Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
.200 (5.08) Max.
.350 (8.89) Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
Meniscus Free
.031 (.787) Above
Seating Plane
.200 (5.08) Max.
.300 (7.62) Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
.031 (.787)
Clean
Above Seat
Meniscus Free
.031 (.787) Above
Seating Plane
.200 (5.08) Max.
.200 (5.08) Max. .300 (7.62) Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
.137/.196
(3.48/4.98)
1.0 (25.4) Min.
.300 (7.62) Max.
.500 (12.7) Max.
.200 (5.08) ±.030
.300 (7.62)
Max.
.500 (12.7)
Max.
1.00 (25.4) Min.
.200 (5.08) ±.031
a
a = .009 ±.002
(.229 ±.051)
0.040
(1.02)
Min.
.268 (6.81)
Max.
.330 (8.38)
Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
a
0.04
(1.02)
.400 (10.16) Max.
1.0 (25.4) Min.
.300 (7.62)
Max.
.300 (7.62)
Max.
.200 (5.08) ±.030
.300 (7.62) Max.
.300 (7.62) Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
.060 (1.52)
Max.
.225
(5.71)
MAX.
.200 (5.08) ±.030
.059 (1.5)
Max.
.300
(7.62)
MAX.
1.0
(25.4)
Min.
.390 (9.91) Max.
Meniscus Free
.031 (.787) Above
Seating Plane
.300 (7.62) Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
.400 (10.16) Max.
.400 (10.16) Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
.060 (1.52)
Max.
.200 (5.08) Max.
.300 (7.62) Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
.031 (.787)
Clean
Above Seat
.200 (5.08) Max.
.250 (6.35) Max.
1.0 (25.4) Min.
.100 (2.54) ±.030
Meniscus Free
.031 (.787) Above
Seating Plane
.210 (5.33)
Max.
.358 (9.09)
Max.
0.100 ±.031
(2.54 ±.787)
0.008 ±0.002
(.203 ±.051)
0.040 (1.016)Min.
.170 (4.32)
Max.
.271 (6.88)
Max.
1.0 (25.4) Min.
.100 (2.54) ±.030
a
0.04
(1.02)
Leads = #22 AWG Leads = #22 AWG
Leads = #22 AWG Leads = #22 AWG
*SL style available in all SR configurations.
28
SkyCap®
Configurations by Lead Spacing
LEAD SPACING .200 ±.030 continued
Dimensions: Inches (Millimeters)
SR65-LP* SR67 AR75/SR75* AR89/SR89*
(T=.150) (T=.125) (T=.150) (T=.125)
Leads = #22 AWG
LEAD SPACING .400 ±.030
SR50* SR76*
(T=.200) (T=.175)
LEAD SPACING .250 ±.030
Dimensions: Inches (Millimeters)
SR16 AR22/SR22 SR33
(T=.125) (T=.125) (T=.150)
.200 (5.08) Max.
.300 (7.62)
Max. Seated
Height
.200 (5.08) ±.030
.230 (5.84) ±.030
.031 (.787)
Seated
Plane
.031 (.787)
Min. Clean
Lead Above
Seat
.400 (10.16) Max.
.480 (12.2)
Max.
.400 (10.16)
Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
Meniscus
Free .031
(7.87) Above
Seating Plane
.215 (5.46)
Max.
.260 (6.60)
Max.
1.00 (25.4) Min.
.200 (5.08) ±.031
0.025 ±0.001
(.635 ±.025)
0.040
(1.02)
Min.
a
a = .009 ±.002
(.229 ±.051)
.200 (5.08) Max.
.300 (7.62)
Max.
.250 (6.35)
±.030
.230 (5.84)
±.030
Meniscus Free
.031 (.787)
Above
Seating Plane
1.0 (25.4)
Min.
.200 (5.08) Max.
.300 (7.62)
Max.
.250 (6.35)
±.030
.390 (9.91) Max.
.400 (10.16)
Max.
.250 (6.35) ±.030
.230 (5.84)
±.030
LEAD SPACING .300 ±.030
SR27 SR34
(T=.150) (T=.150)
.260 (6.60) Max.
.250 (6.35)
Max.
1.0 (25.4)
Min.
.300 (7.62) ±.030
Meniscus
Free .031
(.787)
Above
Seating
Plane
.300 (7.62) Max.
.350 (8.89)
Max.
1.0 (25.4)
Min.
.300 (7.62) ±.030
Meniscus
Free .031
(.787)
Above
Seating
Plane
LEAD SPACING .375 ±.030
AR38/SR38*
(T=.150)
.300 (7.62) Max.
.425 (10.8)
Max.
1.0 (25.4)
Min.
.375 (9.53) ±.030
Meniscus Free
.031 (.787)
Above
Seating Plane
.500 (12.7) Max.
.500 (12.7)
Max.
1.0 (25.4)
Min.
.400 (10.16) ±.030
.060 (1.52)
Max.
.500 (12.7)
Max.
.480 (12.2)
Max.
.440 (11.2)
Max.
1.0 (25.4)
Min.
.400 (10.16)
±.030
.025 (0.64)
±.004
.031 (.787)
Min.
Clean Lead
Above Seat
Seating Plane
NOTES: 1. All leads are #24 AWG unless otherwise noted.
2. Available in tape and reel packaging(*).
3. Other styles are also available, contact factory.
4. (T = XXX) under type designation is maximum thickness in inches.
Leads = #22 AWG
.300
(7.62)
MAX.
.350
(8.89)
MAX.
COATING
LIMIT
.200 (5.08) ±.030
1.0 (25.4)
Min.
Leads = #22 AWG
*SL style available in all SR configurations.
Drawings are for illustrative purposes only.
Actual lead form shape could vary within stated tolerances based on body size.
33
Radial Leads/Packaging
Tape and Reel
GENERAL INFORMATION
1. Standard reel diameter is 355 millimeters (14 inches) maximum.
2. Reeling standard (#1 or #2) should be specified when ordering.
HOW TO ORDER
To specify tape and reel packaging, add TR1, TR2 or TRX to the end
of the AVX 12 digit part number.
Examples:
SR215C104KARTR1
SR305E105MARTR2
SR215C103JARTRX
32 mm max.
16 ± 0.5 mm
SR07 SR29 SR59 SR65 SR75
32 mm max.
19 mm min. to
base of unit
SR07 SR29 SR59 SR65 SR75
32 max.
16±.5
SR29 SR28 SR12 SR21 SR13 SR32 MR05
32 max.
16 min.
SR15 MR06 SR30 SR40
20 +1.5
-1.0
SR21 SR32 SR63
(TRX) (TRX) (TRX) SR20
Dimensions in Millimeters
32 max.
19 min.
SR29 SR28 SR12 SR21 SR13 SR32 MR05
32 max.
19 min.
SR15 MR06 SR30 SR40
SR20
Dimensions in Millimeters
T
K
ED
B
A
L
Q
C
W
R
F
S
S
ONMX
DESCRIPTION
A. Feed Hole Pitch
B. Feed Hole Diameter
C. Feed Hole Location
D. Component Lead Spacing
E. Component Lead Location
F. Component Lead Protrusion
(edge of carrier to cut end of lead)
K. Component Body Location
L. Carrier Tape Width
M. Carrier Tape Assembly Thickness
N. Carrier Tape Spliced Thickness
O. Carrier Tape Spliced Length
Q. Adhesive Tape Border
R. Component Bent Leads (either direction)
S. Component Misalignment
T. Component Pitch
W. Adhesive Tape Width
X. Carrier Tape Thickness
Y. Cumulative Pitch over 20 Pitches
DIMENSIONS (MM)
12.70 ± .20
3.99 ± .20
9.02 ± .51
5.00+.79 or 2.54 +.79
-.20 -.20
3.81 ±.51 or 5.00 ±.51
for 2.54 lead spacing
2.00 maximum
6.35 ±.41
18.01 +1.02
-.51
.71 ± .20
1.42 maximum
50.80 - 88.90
3.00 maximum
.79 maximum
.99 maximum
12.70 ±.99
5.00 minimum
.51 ±.10
254 ±2.00
STANDARD 1
STANDARD 2
STANDARD 2
STANDARD 1
THE INSERTABLES
34
Radial Leads/Packaging
REEL DIRECTION
Leads on top of
carrier strip,
body away
Unreel from
LEFT to RIGHT
OVER TOP of reel
QUANTITY PER REEL SR/AR
PART PCS
SR15, 07, 12 3500
SR20, 21, 23, 28
13, 29, 59, 62, 89 3000
SR30, 32, 40, 63, 64
65, 75 2000
MR05, 06 2500
G
A
D
F
E
CB
DESCRIPTION
A – Reel Diameter
B – Reel Outside Width
C – Reel Inside Width
D – Core Diameter (O.D.)
E – Hub Recess Diameter
F – Hub Recess Depth
G – Arbor Hole Diameter
DIMENSIONS (MM)
304.80 - 355
50.80 maximum
38.10 - 46.02
102.01 maximum
86.36 maximum
9.50 minimum
25.40 - 30.48
CONVERSION TABLE
MM IN MM IN MM IN MM IN MM IN
.10
.20
.38
.41
.51
.71
.79
.99
1.02
1.42
.004
.007
.015
.016
.020
.028
.031
.039
.040
.056
1.52
2.00
2.54
3.00
3.18
3.48
3.81
3.99
4.45
4.98
.060
.079
.100
.118
.125
.137
.150
.157
.175
.196
5.00
5.08
6.22
6.35
6.60
6.99
7.62
8.89
9.02
9.50
.197
.200
.245
.250
.260
.275
.300
.350
.355
.374
9.91
10.03
10.16
11.68
12.50
12.70
16.00
18.01
25.40
30.48
.390
.395
.400
.460
.492
.500
.630
.709
1.000
1.200
32.00
38.10
46.02
50.80
86.36
88.90
102.01
254.00
304.80
355.00
1.260
1.500
1.812
2.000
3.400
3.500
4.016
10.000
12.000
14.000
*SL style available in all SR configurations.