02/11/2015 www.crouzet.com O 42 mm 10 and 17 Watts 10 W Part number 82810018 Usable power : 9 to 16 W For low-speed drive applications Sintered bronze bearings lubricated for life Power supply by 4.75 mm tags Interchangeable brushes Optional one-channel encoder Part numbers 82810018 Type Type Voltage References 10 W 828100 24 V Without encoder Specifications No-load characteristics Speed of rotation (rpm) Absorbed power (W) Absorbed current (A) 2780 4,3 0,18 Nominal characteristics Speed (rpm) Torque (mNm) Usable power (W) Absorbed power (W) Absorbed current (A) Gearbox case temperature rise (C) Efficiency (%) 2000 41,5 8,7 15,6 0,65 46 55,7 General characteristics Insulation class (conforming to IEC 85) Protection (IEC/EN 60529) Max. output power (W) Start torque (mNm) Starting current (A) Resistance () Inductance (mH) Torque constant (Nm/A) Electrical time constant (ms) Mechanical time constant (ms) Thermal time constant (mn) F (155 C) IP20 9,5 117 1,7 14,6 10,7 0,077 0,73 17 10 Inertia (g.cm2 ) Weight (g) Number of of segments Service life (h) Sintered bronze bearings Replaceable brushes 72 310 8 3000 Encoder characteristics Output current (mA) Supply (V) Ambient temperature (C) < 25 (25 C) 4,5 30 DC -40 85 C Made to order products, available on request Special interference suppression Other supply voltages Motor with 1 ball bearing at front (essential for vertical motor) Shaft lengths at front and/or rear 5 pulses/revolution magnetic encoder Reversible magnetic encoder (1 or 5 pulses/revolution) Other fixing flanges on front Dimensions (mm) 828000 - 828100 Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 No www.crouzet.com Legend 2 x M3 at 180, depth 5 mm over O 32 2 holes O 2.75 0.05 at 120 depth 5 mm O 32 2 tags IEC 760, series 4.8 x 0.5 L : 828000 : 84.8 mm max. L : 828100 : 69.8 mm max. Dimensions (mm) Dimensions with magnetic encoder No Legend L1 : 828000 : 99.1 mm max. L1 : 828100 : 84.1 mm max. Curves 828100 Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 No www.crouzet.com Legend rpm Torque/speed curve Curves 828100 No Legend Torque/current curve Connections Encoder and connector : STOCKO MKS 3735-6-0-505 Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 www.crouzet.com Part number of female connector to be used : STOCKO MKF 17-230 / 260 / 330 / 360 No Legend Motor power supply +5 +24 V DC (encoder power supply) 0 V DC (encoder power supply) Encoder signal output Motor power supply Product adaptations Special output shaft Pinion on output shaft Special supply voltage Special ball bearings Special mounting plate Special connections Encoder : 5, 200, 500 or 1000 pulses/revolution Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected