MUR120 NEW PRODUCT 1.0A SUPER-FAST GLASS PASSIVATED RECTIFIER Features * * * * * Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability B A A Surge Overload Rating to 35A Peak Lead Free Finish, RoHS Compliant (Note 3) C Mechanical Data D * * Case: DO-41 * * Moisture Sensitivity: Level 1 per J-STD-020C Dim Min Terminals: Finish - Bright Tin. Solderable per MIL-STD-202, Method 208 A 25.40 3/4 B 4.06 5.21 C 0.71 0.864 D 2.00 2.72 * * * * Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 DO-41 Plastic Polarity: Cathode Band Ordering Information: See Last Page Marking: R120 Max All Dimensions in mm Weight: 0.34 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Value Unit VRRM VRWM VR 200 V VR(RMS) 140 V IO 1.0 A IFSM 35 A @ IF = 1.0A, TJ = 25C @ IF = 1.0A, TJ = 150C VFM 0.875 0.710 V @ TJ = 25C @ TJ = 150C IRM 2.0 50 mA Reverse Recovery Time (Note 2) trr 25 ns Typical Junction Capacitance (Note 1) Cj 27 pF RqJL 50 K/W Tj, TSTG -55 to +150 C Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TL = 130C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance, Junction to Lead Operating and Storage Temperature Range Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4V DC. 2. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 6. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS30178 Rev. 3 - 2 1 of 3 www.diodes.com MUR120 a Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 1.0 0.5 0 0 50 25 75 100 125 150 175 10 TJ = 150C TJ = 25C 1.0 Pulse Width - 300us 0.1 0.2 TL, LEAD TEMPERATURE (C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) NEW PRODUCT 1.5 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 60 Single Half-Sine-Wave (JEDEC Method) 10 50 TJ = 1500C 40 1.0 TJ = 1250C 30 0.1 20 10 0.01 TJ = 250C 0 1 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 0.001 0 20 40 60 80 100 120 140 160 180 200 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 4 Typical Reverse Characteristics DS30178 Rev. 3 - 2 2 of 3 www.diodes.com MUR120 NEW PRODUCT 1000 CT, TOTAL CAPACITANCE (pF) Tj = 25C f = 1MHz 100 10 1 4 10 100 VR, REVERSE VOLTAGE (V) Fig. 5 Typical Total Capacitance trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 6 Reverse Recovery Time Characteristic and Test Circuit Ordering Information Notes: (Note 4) Device Packaging Shipping MUR120-A DO-41 5K/Ammo Pack MUR120-B DO-41 1K/Bulk MUR120-T DO-41 5K/Tape & Reel, 13-inch 4. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf DS30178 Rev. 3 - 2 3 of 3 www.diodes.com MUR120