The 3MTM Particulate Respirator
8210, N95 is designed to help
provide quality, reliable worker
protection against certain non-oil
based particles. The 3MTM
Particulate Respirator 8110S, N95
offers the same protection for
those workers with smaller faces.
The 8210 and the 8110S offer a
number of benefits to you and
your workers.
NIOSH approved N95
• At least 95% filtration efficiency
against solid and liquid aerosols that
do not contain oil.*TC-84A-0007
Advanced Electret Media
• Advanced electrostatically charged
microfibers make breathing easier
and cooler.
Helps provide worker protection
• Because they are comfortable to
wear and easy to use, workers are
quick to accept and use maintenance-
free respirators, like the 8210 and
8110S. Studies have shown they can
provide protection equivalent to a
rubber facepiece respirator…at much
lower cost and greater convenience.
Lightweight construction
• Promotes greater worker comfort.
•
Contributes to increased wear time.
Adjustable noseclip
• Helps provide a custom fit
and secure seal.
• Reduces the potential for
eyewear fogging.
Suggested Applications
Particulate Respirators
8210 and 8110S, N95
3044
page 1 of 2
3
3MTM Particulate Respirator 8210, N95
(Inset photo: 3MTM Particulate Respirator 8110S, N95)
• Grinding
• Sanding
• Sweeping
• Bagging
• Other dusty
operations
• Woodworking
• Foundries
Issue Date 01/01/04
*Tested against particles approximately 0.3 micron in size (mass median aerodynamic diameter) per 42 CFR 84.
These respirators help reduce exposure to certain
particles. Misuse may result in sickness or death.
Before use, the wearer must read and understand
User Instructions provided as a part of product
packaging. Time use limitations may apply.
For
proper use, see package instructions, supervisor
or call 3M
OH&ESD Technical Service in U.S.A.,
1-800-243-4630. In Canada, call 1-800-267-4414.
WARNING
!
3MTM Particulate Respirators 8210 and 8110S, N95 3044
page 2 of 2
Advanced Electret Media
Advanced electrostatically charged
microfibers make breathing easier
and cooler.
Technologies
Respirators Per Box
8210 & 8110S Respirators Per Case
20 160
Use For:
• Solids such as those from
processing minerals, coal,
iron ore, flour, and certain
other substances.
• Liquid or non-oil based
particles from sprays that do
not also emit harmful vapors.
Do Not Use For:
Gases and vapors, including those
present in paint spray operations,
asbestos, arsenic, cadmium, lead,
4,4'-methylenedianiline (MDA) or
sandblasting. Aerosol concentrations
that exceed 10 times the OSHA
PEL, or applicable exposure
limits, whichever is lower. This
respirator does not supply oxygen.
Important
Before using these respirators,
you must determine the following:
1. The type of contaminant(s)
for which the respirator is
being selected.
2. The concentration level
of contaminant(s).
3. Whether the respirator can be
properly fitted on the wearer’s
face. Do not use with beards,
on other facial hair, or other
conditions that prevent a good
seal between the face and the
faceseal of the respirator.
4. Before use of these respirators,
a written respiratory protection
program must be implemented,
meeting all the requirements
of OSHA 29 CFR 1910.134,
including training, medical
evaluation and fit testing.
Time Use Limitation
If respirator becomes damaged,
soiled, or breathing becomes
difficult, leave the contaminated
area immediately and dispose of
the respirator.
3M Occupational Health and Environmental Safety Division
3M Center, Building 235-2W-70
St. Paul, MN 55144-1000
For more information, please contact:
3M Occupational Health and
Environmental Safety Division
(OH&ESD)
In the U.S., contact:
Sales Assistance
1-800-896-4223
Technical Assistance
1-800-243-4630
Fax On Demand
1-800-646-1655
Internet
http://www.3M.com/occsafety
For other 3M products
1-800-3M HELPS
In Canada, contact:
3M Canada Company, OH&ESD
P.O. Box 5757
London, Ontario N6A 4T1
Sales Assistance
1-800-265-1840, ext. 6137
Technical Assistance (Canada only)
1-800-267-4414
Fax On Demand
1-800-646-1655
Internet
http://www.3M.com/CA/occsafety
Technical Assistance In Mexico
01-800-712-0646
5270-2255, 5270-2119 (Mexico City only)
Technical Assistance In Brazil
0800-132333
Fax On Demand O.U.S. Locations
1-651-732-6530
Additional Information
This respirator contains no
components made from natural
rubber latex.
