MB90F343CEPMC - Fujitsu Limited - Datasheet.Directory

FUJITSU MICROELECTRONICS

DATA SHEET

2008.8

The information fo r microcontroller support s is shown in the following homepage.

Be sure to refer to the "Check Sheet" for the latest cautions on development.

"Check Sheet" is seen at the following support page

"Check Sheet" lists the minimal requirement items to be checked to prevent problems beforehand in

system development. http://edevice.fujitsu.com/micom/en-support/

16-bit Microcontroller

CMOS

F2MC-16LX MB90340E Series

MB90341E(S)/341CE(S)/342E(S)/342CE(S)/F342E(S)/F342CE(S)/F343E(S)/F343CE(S)/F345E(S)/

MB90F345CE(S)/346E(S)/346CE(S)/F346E(S)/F346CE(S)/347E(S)/347CE(S)/F347E(S)/F347CE(S)/

MB90348E(S)/348CE(S)/349E(S)/349CE(S)/F349E(S)/F349CE(S)/V340E-101/V340E-102

■DESCRIPTION

The MB90340E series with up to 2 FULL-CAN* interfaces is especially designed for automotive and other industrial

applications. Its main feature are the on-board CAN Interfaces, which conform to V2.0 Part A and Part B, while

supporting a very flexible message buffer scheme and so offering more functions than a normal full CAN approach.

The po we r to the MCU cor e (3 V) is su pplied b y a built-in regulator cir cuit, g iving th ese micr ocontrolle rs superior

performance in terms of power consumption and toler ance to EMI.

* : Controller Area Network (CAN) - License of Robert Bosch GmbH

Note : F2MC is the abbr eviation of FUJITSU Flexible Microcontroller.

DS07-13747-3E

MB90340E Series

2DS07-13747-3E

■FEATURES

• CPU

• Instruction system best suited to controller

- Wide choice of data types (bit, byte, word, and long word)

- Wide choice of addressing modes (23 types)

- Enhanced functionality with signed multiply and divide instructions and the RETI instruction

- Enhanced high-precision computing with 32-bit accumulator

• Instruction system compatible with high-level language (C language) and multitask

- Employing system stack pointer

- Various enhanced pointer indirect instructions

- Barrel shift instructions

• Increased processing speed

- 4-byte instruction queue

• Serial interface

• LIN-UART : 4 channels

- Equipped with full-duplex double buffer

- Clock-asynchronous or clock-synchronous serial transmission is available

•I

2C interface : 2 channels (only for devices with a C suffix in the part number)

- Up to 400 kbps transfer rate

• Interrupt controller

• Powerful 8-level, 34-condition interrupt feature

• Up to 16 external interrupts are supp o rted

• Automatic data transfer function independent of CPU

- Expanded intelligent I/O service function (EI2OS) : up to 16 channels

• I/O ports

• General-purpose input/output port (CMOS output)

- 80 ports (for devices without an S suffix in the part number - i.e. devices that support the sub clock)

- 82 ports (for devices with an S su ffix in the part number - i.e. devices th at do not support the sub clock)

• 8/10-bit A/D converter

• 16 channels (only for devices without a C suffix in the part number)

• 24 channels (only for devices with a C suffix in the part number)

• Resolution is selectable between 8-b it and 10-bit.

• Activation by external trigger input is allowed.

• Conversion time : 3 µs (at 24 MHz machine clock, including sampling time)

• Address match detection (program patch) function

• Detects address matches against 6 address pointers

• Timer

• Time-base timer, watch timer, watchdog timer : 1 chan nel

• 8/16-bit PPG timer : 8-bit × 16 channels, or 16-bit × 8 channels

• 16-bit reload timer : 4 channels

• 16-bit input/output timer

- 16-bit free-run timer : 2 channels

(FRT0 : ICU 0/1/2/3, OCU 0/1/2/3, FRT1 : ICU 4/5/6/7, OCU 4/5/6/7)

- 16-bit input cap ture: (ICU): 8 channels

- 16-bit outpu t compare: (OCU): 8 channels (Continued)

MB90340E Series

DS07-13747-3E 3

(Continued)

• Full-CAN controller

• Up to 2 channels

• Compliant with Ver2.0A and Ver2.0B CAN specificat ions

• 16 built-in message buffers

• CAN wake-up function

• Low power consumption (standby) mode

• Sleep mode (a mode that halts CPU operating clock)

• Timebase timer mode (a mode where only the oscillation clock, sub clock, timebase timer and watch timer

operate)

• Watch mode (a mode that operates sub clock and watch timer only)

• Stop mode (a mode that stops oscillation clock and sub clock)

• CPU intermittent operation mode

• Clock modulation circuit

• Technology

•CMOS technology

MB90340E Series

4DS07-13747-3E

■PRODUCT LINEUP

(Continued)

Part Number

Parameter

MB90V340E-101,

MB90V340E-102

MB90F342E(S), MB90F342CE(S),

MB90F343E(S), MB90F343CE(S),

MB90F345E(S), MB90F345CE(S),

MB90F346E(S), MB90F346CE(S),

MB90F347E(S), MB90F347CE(S),

MB90F349E(S), MB90F349CE(S)

MB90341E(S), MB90341CE(S),

MB90342E(S), MB90342CE(S),

MB90346E(S), MB90346CE(S),

MB90347E(S), MB90347CE(S),

MB90348E(S), MB90348CE(S),

MB90349E(S), MB90349CE(S)

Type Evaluation products Flash memory products MASK ROM products

CPU F2MC-16LX CPU

System clock On-chip PLL clock multiplier (×1, ×2, ×3, ×4, ×6, 1/2 when PLL stops)

Minimum instruction execution tim e : 42 ns (4 MHz osc. PLL × 6)

ROM External

512 Kbytes :

MB90F345E(S), MB90F345CE(S)

384 Kbytes :

MB90F343E(S), MB90F343CE(S)

256 Kbytes :

MB90F342E(S), MB90F342CE(S),

MB90F349E(S), MB90F349CE(S)

128 Kbytes :

MB90F347E(S), MB90F347CE(S)

64 Kbytes :

MB90F346E(S), MB90F346CE(S)

256 Kbytes :

MB90342E(S), MB90342CE(S),

MB90349E(S), MB90349CE(S)

128 Kbytes :

MB90341E(S), MB90341CE(S),

MB90347E(S), MB90347CE(S),

MB90348E(S), MB90348CE(S)

64 Kbytes :

MB90346E(S), MB90346CE(S)

RAM 30 Kbytes

20 Kbytes :

MB90F343E(S), MB90F343CE(S),

MB90F345E(S), MB90F345CE(S)

16 Kbytes :

MB90F342E(S), MB90F342CE(S),

MB90F349E(S), MB90F349CE(S)

6 Kbytes :

MB90F347E(S), MB90F347CE(S)

2 Kbytes :

MB90F346E(S), MB90F346CE(S)

16 Kbytes :

MB90341E(S), MB90341CE(S),

MB90342E(S), MB90342CE(S),

MB90348E(S), MB90348CE(S),

MB90349E(S), MB90349CE(S)

6 Kbytes :

MB90347E(S), MB90347CE(S)

2 Kbytes :

MB90346E(S), MB90346CE(S)

Emulator-specific

power supply* Yes ⎯

Technology 0.35 µm CMOS with

regulator for built-in

power supply

0.35 µm CMOS with built-in power supply regulator +

Flash memory with Charge pump for programming voltage

Operating

voltage range 5 V ± 10%3.5 V to 5.5 V : When normal operating (not using A/D converter)

4.0 V to 5.5 V : When using the A/D converter/Flash programming

4.5 V to 5.5 V : When using the external bus

Temperature range ⎯−40 °C to +105 °C

Package PGA-299 QFP-100, LQFP-100

LIN-UART

5 channels 4 channels

Wide range of baud r ate settings using a dedicated baud rate generator (rel oad timer)

Special synchronous options for adapting to differen t synchronous serial protocols

LIN functionality working either as master or slave LIN device

I2C (400 kbps) 2 channels Devices with a C suffix in the part number : 2 channels

Devices without a C suffix in the part number : ⎯

MB90340E Series

DS07-13747-3E 5

(Continued)

Part Number

Parameter

MB90V340E-101,

MB90V340E-102

MB90F342E(S), MB90F342CE(S),

MB90F343E(S), MB90F343CE(S),

MB90F345E(S), MB90F345CE(S),

MB90F346E(S), MB90F346CE(S),

MB90F347E(S), MB90F347CE(S),

MB90F349E(S), MB90F349CE(S)

MB90341E(S), MB90341CE(S),

MB90342E(S), MB90342CE(S),

MB90346E(S), MB90346CE(S),

MB90347E(S), MB90347CE(S),

MB90348E(S), MB90348CE(S),

MB90349E(S), MB90349CE(S)

A/D Converter 24 input channels Devices with a C suffix in the part number : 24 channels

Devices without a C suffix in the part number : 16 channels

10-bit or 8-bit resolution

Conversion time : Min 3 µs include sample time (per one channel)

16-bit Reload Timer

(4 channels) Operation clock frequency : fsys/21, fsys/23, fsys/25 (fsys = Machine clock frequency)

Supports External Event Count function

16-bit Free- ru n

Timer (2 channels)

Generates an interrupt signal on overflow

Supports Timer Clear whe n the output compare finds a match

Operation clock freq. : fsys, fsys/21, fsys/22, fsys/23, fsys/24, fsys/25, fsys/26, fsys/27

(fsys = Machine clock freq.)

Free-run Timer 0 (clock input FRCK0) corresponds to ICU 0/1/2/3, OCU 0/1/2/3

Free-run Timer 1 (clock input FRCK1) corresponds to ICU 4/5/6/7, OCU 4/5/6/7

16-bit Output

Compare

(8 channels)

Generates a n interrupt signal when one of the 16-bit free- run timer matches the output com-

pare register

A pair of compare registers can be used to generate an output signal.

16-bit Inpu t Capture

(8 channels) Captures the value of the 16-bit free-run timer and generates an interrupt when triggered by

a pin input (rising edge, falling edge, or both rising an d falling edges).

8/16-bit

Programmable

Pulse Generato r

8 channels (16- bit ) /16 cha n ne ls (8- b it)

Sixteen 8-bit reload counters

Sixteen 8-bit reload registers for L pulse width

Sixteen 8-bit reload registers for H pulse width

Supports 8-bit and 16-bit operation modes

A pair of 8-bit relo ad counters can be configured as one 16-bit reload coun ter or as

8-bit prescaler plus 8-bit reload counter

Operating clock freq. : fsys, fsys/21, fsys/22, fsys/23, fsys/24 or 128 µs@fosc = 4 MHz

(fsys = Machine clock frequency, fosc = Oscillation clock frequency)

CAN Interface

3 channels

2 channels :

MB90F342E(S), MB90F342CE(S),

MB90F343E(S), MB90F343CE(S),

MB90F345E(S), MB90F345CE(S)

1 channel :

MB90F346E(S), MB90F346CE(S),

MB90F347E(S), MB90F347CE(S),

MB90F349E(S), MB90F349CE(S)

2 channels :

MB90341E(S), MB90341CE(S),

MB90342E(S), MB90342CE(S)

1 channel :

MB90346E(S), MB90346CE(S),

MB90347E(S), MB90347CE(S),

MB90348E(S), MB90348CE(S),

MB90349E(S), MB90349CE(S)

Conforms to CAN Specification Vers ion 2.0 Part A and B

Automatic re-transmission in case of error

Automatic transmission in response to Remote Frames

Prioritized 16 messag e buffers for data and ID’s

Supports multiple messages

Flexible configuration of acceptance filtering :

Full bit compare/Full bit mask/Two partial bit masks

Supports up to 1 Mb ps

MB90340E Series

6DS07-13747-3E

(Continued)

* : It is setting of Jumper switch (TOOL VCC) when Emulator (MB2147-01) is used.

Please refer to the Emulator hardware man ual for details.

Part Number

Parameter

MB90V340E-101,

MB90V340E-102

MB90F342E(S), MB90F342CE(S),

MB90F343E(S), MB90F343CE(S),

MB90F345E(S), MB90F345CE(S),

MB90F346E(S), MB90F346CE(S),

MB90F347E(S), MB90F347CE(S),

MB90F349E(S), MB90F349CE(S)

MB90341E(S), MB90341CE(S),

MB90342E(S), MB90342CE(S),

MB90346E(S), MB90346CE(S),

MB90347E(S), MB90347CE(S),

MB90348E(S), MB90348CE(S),

MB90349E(S), MB90349CE(S)

External Interrupt

(16 channels) Can be used rising edge, falling edge, starting up by H/L level input, external interrupt,

expanded intelligent I/O services (EI2OS) and DMA

D/A Converter 2 channels ⎯

Sub clock

(maximum 100 kHz) Only for

MB90V340E-102 De vices with sub cloc k : devices without an S suffix in the part nu mber

De vices without sub clock : devices with an S suffix in the part number

I/O Ports

Virtually all external pins can be used as general purpose I/O port

All ports are push-pull outputs

Bit-wise settable as input/output or peripheral signal

Can be configured 8 as CMOS schmitt trigger/ automotive inputs (in blocks of 8 pins)

TTL input level settable for external bus (32-pin only for external bus)

Flash Memory ⎯

Supports automatic programming, Embedded Algorithm

Write/Erase/Erase-Suspend/Resume commands

A flag indicating completion of the algorithm

Number of erase cycles : 10 000 cycles

Data retention time : 20 years

Boot block configuration

Erase can be performed on each block

Block protection with extern al programming voltage

Flash Security Featu re for protect ing the content o f the Flash (except

for MB90F346E(S) and MB90F346CE (S) )

MB90340E Series

DS07-13747-3E 7

■PIN ASSIGNMENTS

• MB90341E(S), MB90342E(S), MB90F342E(S), MB90F343E(S), MB90F345E(S) , MB90346E(S),

MB90F346E(S), MB90347E(S), MB90F347E(S), MB90348E(S), MB90349E(S) , MB90F349E(S)

(Continued)

(TOP VIEW)

(FPT-100P-M06)

* : X0A, X1A : devices without an S suffix in the part number

P40, P41 : devices with an S suffix in the pa rt number

100

P04/AD04/INT12

P23/A19/PPGF(E)

P22/A18/PPGD(C)

P21/A17/PPGB(A)

P20/A16/PPG9(8)

P17/AD15

P16/AD14

P15/AD13

Vss

Vcc

P14/AD12/SCK3

P13/AD11/SOT3

P12/AD10/SIN3/INT11R

P11/AD09/TOT1

P10/AD08/TIN1

P07/AD07/INT15

P06/AD06/INT14

P05/AD05/INT13

P75/INT5

P74/INT4

P73/INT3

P72/INT2

P71/INT1

P70/INT0

Vss

P67/AN7/PPGE(F)

P66/AN6/PPGC(D)

P65/AN5/PPGA(B)

P64/AN4/PPG8(9)

P63/AN3/PPG6(7)

P62/AN2/PPG4(5)

P61/AN1/PPG2(3)

P60/AN0/PPG0(1)

AVss

AVRL

AVRH

AVcc

P57/AN15

P03/AD03/INT11

P02/AD02/INT10

P01/AD01/INT9

P00/AD00/INT8

PA1/TX0

PA0/RX0/INT8R

P97/OUT3

P96/OUT2

P95/OUT1

P94/OUT0

P93/PPG7(6)

P92/PPG5(4)

P91/PPG3(2)

P90/PPG1(0)

Vss

Vcc

P87/SCK1

P86/SOT1

P85/SIN1

P84/SCK0/INT15R

P83/SOT0/TOT2

P82/SIN0/TIN2/INT14R

P81/TOT0/CKOT/INT13R

P80/TIN0/ADTG/INT12R

P77/INT7

P76/INT6

MD0

MD1

MD2

P24/A20/IN0

P25/A21/IN1

P26/A22/IN2

P27/A23/IN3

P30/ALE/IN4

P32/WRLX/WRX/INT10R

P34/HRQ/OUT4

P56/AN14

P55/AN13

P54/AN12/TOT3

P53/AN11/TIN3

P52/AN10/SCK2

P51/AN9/SOT2

P50/AN8/SIN2

P47

P46

P45/FRCK1

P44/FRCK0

P43/IN7/TX1

P42/IN6/RX1/INT9R

Vss

Vcc

P41/X1A *

P40/X0A *

P37/CLK/OUT7

P36/RDY/OUT6

QFP - 100

80797877 76 75 74 7372 71 70 69 6867 66 65 64 6362 61 60 59 5857 56 55 54 5352 51

123456789 1011121314 15 16 17 1819 20 21 22 2324 25 26 27 2829 30

RST

P31/RD/IN5

P33/WRH

P35/HAK/OUT5

MB90340E Series

8DS07-13747-3E

(Continued)

(TOP VIEW)

(FPT-100P-M2 0 )

* : X0A, X1A : devices without an S suffix in the part numb er

P40, P41 : devices with an S suffix in the part number

P04/AD04/INT12

P23/A19/PPGF(E)

P22/A18/PPGD(C)

P21/A17/PPGB(A)

P20/A16/PPG9(8)

P17/AD15

P16/AD14

P15/AD13

Vss

Vcc

P14/AD12/SCK3

P13/AD11/SOT3

P12/AD10/SIN3/INT11R

P11/AD09/TOT1

P10/AD08/TIN1

P07/AD07/INT15

P06/AD06/INT14

P05/AD05/INT13

P00/AD00/INT8

PA1/TX0

PA0/RX0/INT8R

P97/OUT3

P96/OUT2

P95/OUT1

P94/OUT0

P93/PPG7(6)

P92/PPG5(4)

P91/PPG3(2)

P90/PPG1(0)

Vss

Vcc

P87/SCK1

P86/SOT1

P85/SIN1

P84/SCK0/INT15R

P83/SOT0/TOT2

P82/SIN0/TIN2/INT14R

P81/TOT0/CKOT/INT13R

P80/TIN0/ADTG/INT12R

P77/INT7

P76/INT6

MD0

P26/A22/IN2

P27/A23/IN3

P30/ALE/IN4

P32/WRL/WR/INT10R

P34/HRQ/OUT4

P53/AN11/TIN3

P52/AN10/SCK2

P51/AN9/SOT2

P50/AN8/SIN2

P47

P46

P45/FRCK1

P44/FRCK0

P43/IN7/TX1

P42/IN6/RX1/INT9R

Vss

Vcc

P41/X1A*

P40/X0A*

P37/CLK/OUT7

P36/RDY/OUT6

P24/A20/IN0 100

P25/A21/IN1

28P56/AN14

27 P55/AN13

26 P54/AN12/TOT3

49 MD2

50 MD1

P03/AD03/INT11 77

P02/AD02/INT10 76

P01/AD01/INT9

LQFP - 100

75 74 7372 71 70 69 6867 66 65 64 6362 61 60 59 5857 56 55 54 5352 51

123456789 1011121314 15 16 17 1819 20 21 22 2324 25

P75/INT5

P74/INT4

P73/INT3

P72/INT2

P71/INT1

P70/INT0

Vss

P67/AN7/PPGE(F)

P66/AN6/PPGC(D)

P65/AN5/PPGA(B)

P64/AN4/PPG8(9)

P63/AN3/PPG6(7)

P62/AN2/PPG4(5)

P61/AN1/PPG2(3)

P60/AN0/PPG0(1)

AVss

AVRL

AVRH

AVcc

P57/AN15

RST

P31/RD/IN5

P33/WRH

P35/HAK/OUT5

MB90340E Series

DS07-13747-3E 9

• MB90341CE(S), MB90342CE(S), MB90F342CE(S), MB90F343CE(S), MB90F345CE(S), MB90346CE(S),

MB90F346CE( S), MB90347CE(S), MB90F347CE( S), MB90348CE( S), MB90349CE(S ), MB90F349CE(S)

(Continued)

(TOP VIEW)

(FPT-100P-M0 6 )

100

P04/AD04/INT12

P23/A19/PPGF(E)

P22/A18/PPGD(C)

P21/A17/PPGB(A)

P20/A16/PPG9(8)

P17/AD15

P16/AD14

P15/AD13

Vss

Vcc

P14/AD12/SCK3

P13/AD11/SOT3

P12/AD10/SIN3/INT11R

P11/AD09/TOT1

P10/AD08/TIN1

P07/AD07/INT15

P06/AD06/INT14

P05/AD05/INT13

P75/AN21/INT5

P03/AD03/INT11

P02/AD02/INT10

P01/AD01/INT9

P00/AD00/INT8

PA1/TX0

PA0/RX0/INT8R

P97/OUT3

P96/OUT2

P95/OUT1

P94/OUT0

P93/PPG7(6)

P92/PPG5(4)

P91/PPG3(2)

P90/PPG1(0)

Vss

Vcc

P87/SCK1

P86/SOT1

P85/SIN1

P84/SCK0/INT15R

P83/SOT0/TOT2

P82/SIN0/TIN2/INT14R

P81/TOT0/CKOT/INT13R

P80/TIN0/ADTG/INT12R

P77/AN23/INT7

P76/AN22/INT6

MD0

MD1

MD2

P24/A20/IN0

P25/A21/IN1

P26/A22/IN2

P27/A23/IN3

P30/ALE/IN4

P34/HRQ/OUT4

P56/AN14

P55/AN13

P54/AN12/TOT3

P53/AN11/TIN3

P52/AN10/SCK2

P51/AN9/SOT2

P50/AN8/SIN2

P47/SCL1

P46/SDA1

P45/SCL0/FRCK1

P44/SDA0/FRCK0

P43/IN7/TX1

P42/IN6/RX1/INT9R

Vss

Vcc

P41/X1A*

P40/X0A*

P37/CLK/OUT7

P36/RDY/OUT6

QFP - 100

80797877 76 75 74 7372 71 70 69 6867 66 65 64 6362 61 60 59 5857 56 55 54 5352 51

123456789 1011121314 15 16 17 1819 20 21 22 2324 25 26 27 2829 30

P74/AN20/INT4

P73/AN19/INT3

P72/AN18/INT2

P71/AN17/INT1

P70/AN16/INT0

P67/AN7/PPGE(F)

P66/AN6/PPGC(D)

P65/AN5/PPGA(B)

P64/AN4/PPG8(9)

P61/AN1/PPG2(3)

AVss

P57/AN15

AVcc

P60/AN0/PPG0(1)

AVRL

AVRH

Vss

P62/AN2/PPG4(5)

P63/AN3/PPG6(7)

RST

P31/RD/IN5

P33/WRH

P35/HAK/OUT5

P32/WRL/WR/INT10R

* : X0A, X1A : devices with out an S suffix in the pa rt number

P40, P41 : devices with an S suffix in the part number

MB90340E Series

10 DS07-13747-3E

(Continued)

(TOP VIEW)

(FPT-100P-M20)

P04/AD04/INT12

P23/A19/PPGF(E)

P22/A18/PPGD(C)

P21/A17/PPGB(A)

P20/A16/PPG9(8)

P17/AD15

P16/AD14

P15/AD13

Vss

Vcc

P14/AD12/SCK3

P13/AD11/SOT3

P12/AD10/SIN3/INT11R

P11/AD09/TOT1

P10/AD08/TIN1

P07/AD07/INT15

P06/AD06/INT14

P05/AD05/INT13

P00/AD00/INT8

PA1/TX0

PA0/RX0/INT8R

P97/OUT3

P96/OUT2

P95/OUT1

P94/OUT0

P93/PPG7(6)

P92/PPG5(4)

P91/PPG3(2)

P90/PPG1(0)

Vss

Vcc

P87/SCK1

P86/SOT1

P85/SIN1

P84/SCK0/INT15R

P83/SOT0/TOT2

P82/SIN0/TIN2/INT14R

P81/TOT0/CKOT/INT13R

P80/TIN0/ADTG/INT12R

P77/AN23/INT7

P76/AN22/INT6

MD0

P26/A22/IN2

P27/A23/IN3

P30/ALE/IN4

P34/HRQ/OUT4

P53/AN11/TIN3

P52/AN10/SCK2

P51/AN9/SOT2

P50/AN8/SIN2

P47/SCL1

P46/SDA1

P45/SCL0/FRCK1

P44/SDA0/FRCK0

P43/IN7/TX1

P42/IN6/RX1/INT9R

Vss

Vcc

P41/X1A*

P40/X0A*

P37/CLK/OUT7

P36/RDY/OUT6

99P24/A20/IN0 100P25/A21/IN1

28P56/AN14

27 P55/AN13

26 P54/AN12/TOT3

49 MD2

50 MD1

78P03/AD03/INT11 77P02/AD02/INT10 76P01/AD01/INT9

LQFP - 100

75 74 7372 71 70 69 6867 66 65 64 6362 61 60 59 5857 56 55 54 5352 51

123456789 1011121314 15 16 17 1819 20 21 22 2324 25

P75/AN21/INT5

P74/AN20/INT4

P73/AN19/INT3

P72/AN18/INT2

P71/AN17/INT1

P70/AN16/INT0

Vss

P67/AN7/PPGE(F)

P66/AN6/PPGC(D)

P65/AN5/PPGA(B)

P64/AN4/PPG8(9)

P63/AN3/PPG6(7)

P62/AN2/PPG4(5)

P61/AN1/PPG2(3)

P60/AN0/PPG0(1)

AVss

AVRL

AVRH

AVcc

P57/AN15

RST

P31/RD/IN5

P33/WRH

P35/HAK/OUT5

P32/WRL/WR/INT10R

* : X0A, X1A : devices without an S suffix in the part number

P40, P41 : devices with an S suffix in the part number

MB90340E Series

DS07-13747-3E 11

• MB90V340E-101/MB90V340E-102

This pin assignment is for using MB90V340E-101/102 via probecable as MB90340E. (Continued)

(TOP VIEW)

(FPT-100P-M06)

*: X0A, X1A : MB90V340E-102

P40, P41 : MB90V340E-101

100

P04/AD04/INT12

P23/A19/PPGF(E)

P22/A18/PPGD(C)

P21/A17/PPGB(A)

P20/A16/PPG9(8)

P17/AD15/SCK4

P16/AD14/SOT4

P15/AD13/SIN4

Vss

Vcc

P14/AD12/SCK3

P13/AD11/SOT3

P12/AD10/SIN3/INT11R

P11/AD09/TOT1

P10/AD08/TIN1

P07/AD07/INT15

P06/AD06/INT14

P05/AD05/INT13

301 8

P75/AN21/INT5

P03/AD03/INT11

P02/AD02/INT10

P01/AD01/INT9

P00/AD00/INT8

PA1/TX0

PA0/RX0/INT8R

P97/OUT3

P96/OUT2

P95/OUT1

P94/OUT0

P93/PPG7(6)

P92/PPG5(4)

P91/PPG3(2)

P90/PPG1(0)

Vss

Vcc

P87/SCK1

P86/SOT1

P85/SIN1

P84/SCK0/INT15R

P83/SOT0/TOT2

P82/SIN0/TIN2/INT14R

P81/TOT0/CKOT/INT13R

P80/TIN0/ADTG/INT12R

P77/AN23/INT7

P76/AN22/INT6

RST

MD0

MD1

MD2

P24/A20/IN0

P25/A21/IN1

P26/A22/IN2

P27/A23/IN3

P30/ALE/IN4

P31/RD/IN5

P32/WRL/WR/RX2/INT10R

P33/WRH/TX2

P34/HRQ/OUT4

P35/HAK/OUT5

P56/AN14/DA00

P55/AN13

P54/AN12/TOT3

P53/AN11/TIN3

P52/AN10/SCK2

P51/AN9/SOT2

P50/AN8/SIN2

P47/SCL1

P46/SDA1

P45/SCL0/FRCK1

P44/SDA0/FRCK0

P43/IN7/TX1

P42/IN6/RX1/INT9R

Vss

Vcc

P41/X1A*

P40/X0A*

P37/CLK/OUT7

P36/RDY/OUT6

QFP - 100

21201716 19181514131211 2625242322 27 2829435629710

80515871 70 67 6669 6865 64 6362 6176 75 74 7372777879 54 535556 5259 5760

P57/AN15/DA01

P74/AN20/INT4

P73/AN19/INT3

P72/AN18/INT2

P60/AN0/PPG0(1)

P61/AN1/PPG2(3)

P62/AN2/PPG4(5)

P63/AN3/PPG6(7)

P64/AN4/PPG8(9)

P65/AN5/PPGA(B)

P66/AN6/PPGC(D)

P67/AN7/PPGE(F)

Vss

P70/AN16/INT0

P71/AN17/INT1

AVcc

AVRH

AVRL

AVss

MB90340E Series

12 DS07-13747-3E

(Continued)

This pin assignment is for using MB90V340E-101/102 via probecable as MB90340E.

(TOP VIEW)

(FPT-100P-M20)

*: X0A, X1A : MB90V340E-102

P40, P41 : MB90V340E-101

P04/AD04/INT12

P23/A19/PPGF(E)

P22/A18/PPGD(C)

P21/A17/PPGB(A)

P20/A16/PPG9(8)

P17/AD15/SCK4

P16/AD14/SOT4

P15/AD13/SIN4

Vss

Vcc

P14/AD12/SCK3

P13/AD11/SOT3

P12/AD10/SIN3/INT11R

P11/AD09/TOT1

P10/AD08/TIN1

P07/AD07/INT15

P06/AD06/INT14

P05/AD05/INT13

P75/AN21/INT5

P74/AN20/INT4

P73/AN19/INT3

P72/AN18/INT2

P71/AN17/INT1

P70/AN16/INT0

Vss

P67/AN7/PPGE(F)

P66/AN6/PPGC(D)

P65/AN5/PPGA(B)

P64/AN4/PPG8(9)

P63/AN3/PPG6(7)

P62/AN2/PPG4(5)

P61/AN1/PPG2(3)

P60/AN0/PPG0(1)

AVss

AVRL

AVRH

AVcc

P57/AN15/DA01

P00/AD00/INT8

PA1/TX0

PA0/RX0/INT8R

P97/OUT3

P96/OUT2

P95/OUT1

P94/OUT0

P93/PPG7(6)

P92/PPG5(4)

P91/PPG3(2)

P90/PPG1(0)

Vss

Vcc

P87/SCK1

P86/SOT1

P85/SIN1

P84/SCK0/INT15R

P83/SOT0/TOT2

P82/SIN0/TIN2/INT14R

P81/TOT0/CKOT/INT13R

P80/TIN0/ADTG/INT12R

P77/AN23/INT7

P76/AN22/INT6

MD0

P26/A22/IN2

P27/A23/IN3

P30/ALE/IN4

P34/HRQ/OUT4

P53/AN11/TIN3

P52/AN10/SCK2

P51/AN9/SOT2

P50/AN8/SIN2

P47/SCL1

P46/SDA1

P45/SCL0/FRCK1

P44/SDA0/FRCK0

P43/IN7/TX1

P42/IN6/RX1/INT9R

Vss

Vcc

P41/X1A*

P40/X0A*

P37/CLK/OUT7

P36/RDY/OUT6

LQFP - 100

99P24/A20/IN0 100P25/A21/IN1

28P56/AN14/DA00

27 P55/AN13

26 P54/AN12/TOT3

49 MD2

50 MD1

78P03/AD03/INT11 77P02/AD02/INT10 76P01/AD01/INT9 74 7372 71 70 69 6867 66 65 64 6362 61 60 5859 555657 54 5352 51

123456789 1011121314 15 16 1817 212019 22 2324 25

RST

P31/RD/IN5

P32/WRL/WR/RX2/INT10R

P33/WRH/TX2

P35/HAK/OUT5

MB90340E Series

DS07-13747-3E 13

■PIN DESCRIPTION

(Continued)

Pin No. Pin name I/O

Circuit

type*3Function

QFP100*1LQFP100*2

1 to 4 99 to 2

P24 to P27

General purpose I/O pins. The register can be set to select

whether to use a pull-up resistor.In external bus mode, the pin is

enabled as a general-purpose I/O port when the corresponding bit

in the external address output control register (HACR) is 1.

A20 to A23 Output pins of the external address bus. When the corresponding

bit in the external address output control register (HACR) is 0, the

pins are enabled as high address output pins (A20 to A23).

IN0 to IN3 Trigger input pins for input captures.

P30

General purpose I/O pin.The register can be set to select whether

to use a pull-up resistor.

This function is enabled in single-chip mode.

ALE Address latch enable output pin. This function is enabled when

the external bu s is ena bled .

IN4 Trigger input pin for input capture.

P31

General purpose I/O pin.The register can be set to select whether

to use a pull-up resistor.

This function is enabled in single-chip mode.

RD External read strobe output pin. This function is enabled when the

external bus is ena b led .

IN5 Trigger input pin for input capture.

P32

General purpose I/O pin. The register can be set to select whether

to use a pull-up resistor. This function is enabled either in single-

chip mode or when the WR/WRL pin output is disabled.

WR / WRL

Write strobe output pin fo r th e exter nal da ta bus. This f uncti on is

enabled when both t he external bus an d the WR/WRL pin outpu t

are enabled. WRL is used to write-st robe 8 lower bits of t he data

bus in 16-bit access while WR is used to write-strobe 8 bits of the

data bus in 8-bit access.

INT10R External interrupt request input p in.

P33

General purpose I/O pin. The register can be set to select whether

to use a pull-up resistor .This function is enabled either in single-

chip mode or when the WRH pin output is disabled .

WRH

Write strobe output pin for the upper 8 bits of the external data

bus. This function is enabled when the ex ternal bus is enabled,

when the external bu s 16-bit mode is selected, and when the

WRH output pin is enabled.

MB90340E Series

14 DS07-13747-3E

(Continued)

Pin No. Pin name I/O

Circuit

type*3Function

QFP100*1LQFP100*2

P34

General purpose I /O pin. The register can be set to select

whether to use a pull-up resistor. This function is enabled either

in single-chip mode or when the hold function is disabled.

HRQ Hold request input pin. This function is enabled when bot h the

external bus an d th e ho ld fu nction are enable d.

OUT4 Waveform output pin for output compare.

10 8

P35

General purpose I /O pin. The register can be set to select

whether to use a pull-up resistor. This function is enabled either

in single-chip mode or when the hold function is disabled.

HAK Hold acknowledge output pi n. This function is enabled when

both the external bus and the hold function are enabled.

OUT5 Waveform output pin for output compare.

11 9

P36

General purpose I /O pin. The register can be set to select

whether to use a pull-up resistor. This function is enabled either

in single-chip mode or when t he external ready function is

disabled.

RDY External ready input pin. This function is enabled when both the

external bus an d th e external ready fun ct i on are enab l ed .

OUT6 Waveform output pin for output compare.

12 10

P37

General purpose I /O pin. The register can be set to select

whether to use a pull-up resistor. This function is enabled either

in single-chip mode or when the clock output is disabled.

CLK Clock output pin. This function is enabled when both the

external bus and clock output are enabled.

OUT7 Waveform output pin for output compare

13, 14 11, 12

P40, P41 F General purpose I/O pins.

(devices with an S suffix in the part numbe r and or

MB90V340E-101)

X0A, X1A B Oscillation pins for sub clock

(devices without an S suffix in the part number and or

MB90V340E-102)

15 13 VCC ⎯Power (3.5 V to 5.5 V) input pin

16 14 VSS ⎯GND pin

17 15 C K This is the power supply stabilization capacitor This pin should

be connected to a ceramic capacitor with a capacitance greater

than or equal to 0.1 µF.

18 16

P42

General purpose I/O pin.

IN6 Trigger input pin for input capture.

RX1 RX input pin for CAN1 Interface

(MB90341E/342E/F342E/F343E/F345E only)

INT9R External interrupt request input pin

MB90340E Series

DS07-13747-3E 15

Pin No. Pin name I/O

Circuit

type*3Function

QFP100*1LQFP100*2

19 17

P43

General purpo se I/O pin.

IN7 Trigger input pin for input capture.

TX1 TX Output pin for CAN1

(MB90341E/342 E/F342E/F343E/F345E only)

20 18

P44

General purpo se I/O pin.

SDA0 Serial data I/O pin for I2C (devices with a C suffix in the part

number)

FRCK0 Input pin for the 16-bit Free-run Timer 0

21 19

P45

General purpo se I/O pin.

SCL0 Serial clock I/O pin for I2C (devices with a C suffix in the part

number)

FRCK1 Input pin for the 16-bit Free-run Timer

22 20 P46 HGeneral purpo se I/O pin.

SDA1 Serial data I/O pin for I2C (devices with a C suffix in the part

number)

23 21 P47 HGeneral purpo se I/O pin.

SCL1 Serial clock I/O pin for I2C (devices with a C suffix in the part

number)

24 22 P50 OGeneral purpo se I/O pin.

AN8 Analog input pin for the A/D convert er

SIN2 Serial data input pin for UART2

25 23 P51 IGeneral purpo se I/O pin.

AN9 Analog input pin for the A/D convert er

SOT2 Serial data output pin for UART2

26 24 P52 IGeneral purpo se I/O pin.

AN10 Analog input pin for the A/D converter

SCK2 Clock I/O pin for UART2

27 25 P53 IGeneral purpo se I/O pin.

AN11 Analog input pin for the A/D converter

TIN3 Event input pin for the reload time r

28 26 P54 IGeneral purpo se I/O pin.

AN12 Analog input pin for the A/D converter

TOT3 Output pin for the reload timer

29 27 P55 IGeneral purpo se I/O pin.

AN13 Analog input pin for the A/D converter

30, 31 28, 29 P56, P57 JGeneral purpo se I/O pins.

AN14, AN15 Analog input pins for the A/D converter

32 30 AVCC K Analog power input pin for the A/D Con verter

MB90340E Series

16 DS07-13747-3E

(Continued)

Pin No. Pin name I/O

Circuit

type*3Function

QFP100*1LQFP100*2

33 31 AVRH L Reference voltage input pin for the A/D Converter. This power

supply must be turne d on or off while a voltage hi gher than or

equal to AVRH is applied to AVCC.

34 32 AVRL K Lower reference voltage input pin for the A/D Converter

35 33 AVSS K Analog GND pin for the A/D Converter

36 to 43 34 to 41

P60 to P67

General purpo se I/O pins.

AN0 to AN7 Analog input pins for the A/D converter

PPG0, 2, 4, 6,

8, A, C, E Output pins for PPGs

44 42 VSS ⎯GND pin

45 to 50 43 to 48

P70 to P75

General purpo se I/O pins.

AN16 to AN21 Analog input pins for the A/D converter (devices with a C suffix

in the part number)

INT0 to INT5 External interrupt request input pins

51 49 MD2 D Input pin for specifying the operating mode.

52, 53 50, 51 MD1, MD0 C Input pins for specifying the operating mode.

54 52 RST E Reset input pin

55, 56 53, 54

P76, P77

General purpo se I/O pins.

AN22, AN23 Analog input pins for the A/D converter (devices with a C suffix

in the part number)

INT6, INT7 External interrupt request input pins

57 55

P80

General purpo se I/O pin.

TIN0 Event input pin for the reload time r

ADTG Trigger input pin for the A/D converter

INT12R External interrupt request input pin

58 56

P81

General purpo se I/O pin.

TOT0 Output pin for the reload timer

CKOT Output pin for the clock monit or

INT13R External interrupt request input pin

59 57

P82

General purpo se I/O pin.

SIN0 Serial data input pin for UART0

TIN2 Event input pin for the reload time r

INT14R External interrupt request input pin

60 58 P83 FGeneral purpo se I/O pin.

SOT0 Serial data output pin for UART0

TOT2 Output pin for the reload timer

MB90340E Series

DS07-13747-3E 17

(Continued)

Pin No. Pin name I/O

Circuit

type*3Function

QFP100*1LQFP100*2

61 59 P84 FGeneral purp os e I/O pi n.

SCK0 Clock I/O pin for UART0

INT15R External interrupt request input pin

62 60 P85 MGeneral purp os e I/O pi n.

SIN1 Serial data input pin for UART1

63 61 P86 FGeneral purp os e I/O pi n.

SOT1 Serial data output pin fo r UART1

64 62 P87 FGeneral purp os e I/O pi n.

SCK1 Clock I/O pin for UART1

65 63 VCC ⎯Power (3.5 V t o 5.5 V) input pin

66 64 VSS ⎯GND pin

67 to 70 65 to 68 P90 to P93 FGeneral purp os e I/O pi ns

PPG1, 3, 5, 7 Output pins for PPGs

71 to 74 69 to 72 P94 to P97 FGeneral purp os e I/O pi ns

OUT0 to

OUT3 Waveform output pins for output compares. This function is

enabled when the OCU enables waveform output.

75 73 PA0 FGeneral purpose I/O pin.

RX0 RX input pin for CAN0 Interface

INT8R External interrupt request input pin

76 74 PA1 FGeneral purpose I/O pin.

TX0 TX Output pin for CAN0

77 to 84 75 to 82

P00 to P07

General purpose I/O pins. The register can be set to select

whether to use a pull-up resistor. This fu nction is enabled in

single-chip mode.

AD00 to AD07 I/O pins for 8 lower bits of the external address/data bus.

This function is enabled when the external bu s is enabled.

INT8 to INT15 External interrupt request input pins.

85 83

P10

General purpose I/O pin. The register can be set to select

whether to use a pu ll-u p re sist or.

This function is enabled in single-chip mode.

AD08 I/O pin for the external address/data bus.

This function is enabled when the external bu s is enabled.

TIN1 Event input pin for the reload timer

MB90340E Series

18 DS07-13747-3E

(Continued)

Pin No. Pin name I/O

Circuit

type*3Function

QFP100*1LQFP100*2

86 84

P11

General purpose I/O pin. The register can be set to select

whether to use a pull-up resistor. This function is enabled in

single-chip mode.

AD09 I/O pin for the external address/d ata bus. This function is

enabled when the external bus is enabled.

TOT1 Output pin for the reload timer

87 85

P12

General purpose I/O pin. The register can be set to select

whether to use a pu ll-up resistor.

This function is enabled in single-chip mode.

AD10 I/O pin for the external address/d ata bus. This function is

enabled when the external bus is enabled.

SIN3 Serial data input pin for UART3

INT11R External interrupt request input pin

88 86

P13

General purpose I/O pin. The register can be set to select

whether to use a pu ll-up resistor.

This function is enabled in single-chip mode.

AD11 I/O pin for the external address/d ata bus. This function is

enabled when the external bus is enabled.

SOT3 Serial data output pin for UART3

89 87

P14

General purpose I/O pin. The register can be set to select

whether to use a pu ll-up resistor.

This function is enabled in single-chip mode.

AD12 I/O pin for the external address/d ata bus. This function is

enabled when the external bus is enabled.

SCK3 Clock I/O pin for UART3

90 88 VCC ⎯Power (3.5 V to 5.5 V) input pin

91 89 VSS ⎯GND pin

92 90 X1 AMain clock output pin

93 91 X0 Main clock input pin

94 92 P15 G

General purpose I/O pin. The register can be set to select

whether to use a pu ll-up resistor.

This function is enabled in single-chip mode.

AD13 I/O pin for the external address/d ata bus. This function is

enabled when the external bus is enabled.

95 93 P16 G

General purpose I/O pin. The register can be set to select

whether to use a pu ll-up resistor.

This function is enabled in single-chip mode.

AD14 I/O pin for the external address/d ata bus. This function is

enabled when the external bus is enabled.

MB90340E Series

DS07-13747-3E 19

(Continued)

*1 : FPT-100P-M06

*2 : FPT-100P-M20

*3 : For I/O circuit type, refer to “■ I/O CIRCUIT TYPE”.

Pin No. Pin name I/O

Circuit

type*3Function

QFP100*1LQFP100*2

96 94 P17 G

General purpose I/O pin. The register can be set to select

whether to use a pu ll-up resistor.

This function is enabled in single-chip mode.

AD15 I/O pin for the exter nal address/data bus. This function is

enabled when the external bus is en abled.

97 to 100 95 to 98

P20 to P23

General purpose I/O pins. The register can be set to select

whether to use a pull-up resistor.In external bus mode, the pin

is enabled as a general-purpose I/O port when the

corresponding bit in the external address output control

A16 to A19

Output pins of the external address bus. When the

corresponding bit in the external address output control

output pins (A16 to A19).

PPG9,PPGB,

PPGD,PPGF Output pins for PPGs

MB90340E Series

20 DS07-13747-3E

■I/O CIRCUIT TYPE

(Continued)

Type Circuit Remarks

Oscillation circuit

High-speed oscillation feedback

resistor = approx. 1 MΩ

Oscillation circuit

Low-speed oscillation feedback

resistor = approx. 10 MΩ

• MASK ROM and evaluation product s:

CMOS hysteresis input pin

• Flash memory products:

CMOS input pin

MASK ROM and evaluation products:

• CMOS hysteresis input pin

• Pull-down resistor value: approx. 50 kΩ

Flash memory products:

•CMOS input pin

• No pull-down

CMOS hysteresis input pin

Pull-up resistor value: approx. 50 kΩ

Standby control signal

Xout

Standby control signal

X1A

X0A

Xout

CMOS hysteresis

inputs

Pull-down

Resistor

CMOS hysteresis

inputs

Pull-up

Resistor

CMOS hysteresis

inputs

MB90340E Series

DS07-13747-3E 21

(Continued)

Type Circuit Remarks

• CMOS level output

(IOL = 4 mA, IOH = −4 mA)

• CMOS hysteresis input (with function to

disconnect input during standby)

• Automotive input (with function to

disconnect input during standby)

• CMOS level output

(IOL = 4 mA, IOH = −4 mA)

• CMOS hysteresis input (with function to

disconnect input during standby)

• Automotive input (with function to

disconnect input during standby)

• TTL input (with function to disconnect

input during standb y)

• Programmable pull-up resistor: 50 kΩ

approx.

• CMOS level output

(IOL = 3 mA, IOH = −3 mA)

• CMOS hysteresis input (with function to

disconnect input during standby)

• Automotive input (with function to

disconnect input during standby)

CMOS hysteresis

input

Automotive input

Standby control for

input shutdown

Pout

Nout

P-ch

N-ch

Pull-up control

CMOS hysteresis

input

Automotive input

TTL input

Standby control for

input shutdown

Pout

Nout

P-ch

N-ch

CMOS hysteresis

input

Automotive input

Standby control for

input shutdown

Pout

Nout

N-ch

P-ch

MB90340E Series

22 DS07-13747-3E

(Continued)

Type Circuit Remarks

• CMOS level output

(IOL = 4 mA, IOH = −4 mA)

• CMOS hysteresis input (with function to

disconnect input during standby)

• Automotive in put (with function to

disconnect input during standby)

• A/D converter analog input

• CMOS level output

(IOL = 4 mA, IOH = −4 mA)

• D/A analog o utput

• CMOS hysteresis input (with function to

disconnect input during standby)

• Automotive in put (with function to

disconnect input during standby)

• A/D converter analog input

Power supply input protection circuit

• A/D converter reference voltage power

supply input pin, with the protection

circuit

• Flash memory de vices do not have a

protection circuit against VCC for pin

AVRH

CMOS hysteresis

input

Automotive input

Standby control for

input shutdown

Analog input

Pout

Nout

P-ch

N-ch

CMOS hysteresis

input

Automotive input

Standby control for

input shutdown

Analog input

Analog output

Pout

Nout

P-ch

N-ch

P-ch

ANE

AVR

ANE

N-ch

P-ch

MB90340E Series

DS07-13747-3E 23

(Continued)

Type Circuit Remarks

• CMOS level output

(IOL = 4 mA, IOH = −4 mA)

• CMOS input (with functi on to disconnect

input during standby)

• Automotive input (with function to

disconnect input during standby)

• CMOS level output

(IOL = 4 mA, IOH = −4 mA)

• CMOS input (with functi on to disconnect

input during standby)

• Automotive input (with function to

disconnect input during standby)

• TTL input (with function to disconnect

input during standby)

Programmable pull-up resistor: 50 kΩ

approx

• CMOS level output

(IOL = 4 mA, IOH = −4 mA)

• CMOS input (with functi on to disconnect

input during standby)

• Automotive input (with function to

disconnect input during standby)

• A/D converter analog input

CMOS input

Automotive input

Standby control for

input shutdown

Pout

Nout

P-ch

N-ch

Pull-up control

CMOS input

Automotive input

TTL input

Standby control for

input shutdown

Pout

Nout

N-ch

P-ch

CMOS input

Automotive input

Standby control for

input shutdown

Analog input

Pout

Nout

N-ch

P-ch

MB90340E Series

24 DS07-13747-3E

■HANDLING DEVICES

1. Preventing latch-up

CMOS IC may suffer latch-up under the following conditions:

• A voltage higher than VCC or lower than VSS is applied to an input or output pin.

• A voltage higher than the ra ted voltage is applied between VCC and VSS pins.

• The AVCC power supply is applied before the VCC voltage.

Latch-up may increase the pow er supply current drastically, causing thermal damage to the device.

F or the same reason, also be care ful not to let the analog po wer-supply v oltage (A VCC, AVRH) e xceed the digita l

power-supply voltage.

2. Handling unused pins

Leaving unused input terminals open may lead to permanent damage due to malfunction and latch-up; pull up

or pull down the ter m in als th ro ug h the re sist or s of 2 k Ω or more.

3. Power supply pins (V CC/VSS)

• If there are multiple VCC and VSS pins , from the point of view of de vice design, pi ns to be of the same potential

are connected inside of th e device to prevent malfunction such as latch-up.

To reduce unnecessary radiation, prevent malfunctioning of the strobe signal due to the rise of ground level,

and observe the stand ard f or total output current , be sure to connect the VCC and VSS pins to the power supply

and ground externally.

Connect VCC and VSS pins to the device from the current supply source at a possibly low impedance.

• As a measure against power supply noise, it is recommended to connect a capacitor of about 0.1 µF as a

bypass capacitor between VCC and VSS pins in the vicinity of VCC and V SS pins of the device.

4. Mode Pins (MD0 to MD2)

Connect the mode pi ns directly to VCC or VSS pins . To pre v en t the device unintentionally e ntering test mode due

to noise, lay out the printed circuit board so as to minimize the distance from the mode pins to VCC or VSS pins

and to provide a lo w-impedance connection.

Vcc

Vss

Vcc

Vss

Vcc

MB90340E

Series

Vcc Vss

Vcc

Vss

MB90340E Series

DS07-13747-3E 25

5. Sequence for Turning On the Power Supply to the A/D Converter and Analog Inputs

Make sure to turn on the A/D conver ter power supply (AVCC, AVRH, AVRL) and analog inputs (AN0 to AN23)

after turning-on the digital power supply (VCC).

Tur n-off the digital power after turning off the A/D conver ter supply and analog inputs. In this case, make sure

that the voltage does no t exce ed AVRH or AVCC (turning on/off the analog and digital power supplies simulta-

neously is acceptable).

6. Connection of Unused A/D Converter Pins when the A/D Converter is Used

Connect unused pins of A/D converter to AVCC = VCC, AVSS = AVRH = AVRL = VSS.

7. Crystal Oscillator Circuit

The X0, X1 pins and X0A, X1A pins may be possible causes of abnormal operation. Make sure to provide bypass

capacitors via the shortest distance from X0, X1 pins and X0A, X1A pins, crystal oscillator (or ceramic oscillator)

and ground lines, and make sure, to the utmos t effor t, that the oscillation circuit lines do not cross the lines of

other circuits. It is highly reco mme nded t o pr ovide a printed circuit board art work surrounding X0, X1 pins and

X0A, X1A pins with a ground area for stabilizing the operation.

For each of the mass-production products, request an oscillator evaluation from the manufacturer of the oscillator

you are using.

8. Pull-up/down resistors

The MB90340E Series does not support internal pull-up/down resistors (e xcept for the pull-up resistors b uilt into

ports 0 to 3). Use external components where needed.

9. Using external clock

To use an external clock, drive the X0 pin a nd leave the X1 pin open.

10. Precautions when not using a sub clock signal

If you do not connect pins X0A and X1A to an oscillator, use pull-down handling on the X0A pin, and leave the

X1A pin open.

11. Notes on operation in PLL clock mode

If PLL clock mode is selected, the microcontroller attempt to be working with the self-oscillating circuit even when

there is no external oscillator or the external clock input is stopped. Perfor mance of this operation, however,

cannot be guaranteed.

12. Notes on Power-On

To prevent the internal regulator circuit from malfunctioning, set the voltage rise time during power-on to 50 µs

or more (0.2 V to 2.7 V)

MB90340E Series

Open

MB90340E Series

26 DS07-13747-3E

13. Stabilization of power supply voltage

A sudden change in the supply v o ltage ma y cause the device to malfunction e v en within the VCC supply voltage

operating range. Therefore, the VCC supply voltage should be stabilized. For reference, the supply voltage should

be controlled so that VCC ripple variations (peak- to-peak values) at commercial frequencies (50 MHz/60 MHz)

f all below 10% of the standard VCC su pply v oltage and the coeffici ent of fluctuation does not e xceed 0.1 V/ms at

instantaneous power s witching.

14. Port 0 to Port 3 Output During Power-on (External-bus Mode)

As shown below, when the power is turned on in External-Bus mode, there is a possibility that output signal of

Port 0 to Port 3 might be unstable irrespective of the reset input .

15. Notes on Using the CAN Function

To use the CAN function, please set the DIRECT bit of the CAN Direct Mode Register ( CDMR) to 1.

16. Flash Security Function (except for MB90F346E)

A security bit is located in the area of the flash memory.

If protection code 01H is written in the sec urity bit, the flas h me m ory is in the protected state by security.

Therefore please do not write 01H in this address if you do not use the security function.

Refer to following table for the address of the security bit.

17. Serial Communication

There is a possibility to receive wrong data due to the noise or other causes on the serial communication.

Therefore, design a printed circuit boa rd so as to avoid noise.

Retransmit the data if an error occurs because of applying the checksum to the last data in consideration of

receiving wrong data due to the noise.

Flash memory size Address of the security bit

MB90F347E Embedded 1 Mbit Flash Memory FE0001H

MB90F342E

MB90F349E Embedded 2 Mbits Flash Memory FC0001H

MB90F343E Embedded 3 Mbits Flash Memory F90001H

MB90F345E Embedded 4 Mbits Flash Memory F80001H

Port0 to Port3 outputs

might be unstable Port0 to Port3 outputs = Hi-Z

Port0 to Port3

VCC

1/2VCC

MB90340E Series

DS07-13747-3E 27

■BLOCK DIAGRAMS

• MB90V340E-101/102

RAM

LIN-UART

Prescaler

8/10-bit

24 channels

16-bit Reload

Free-run

Timer 0

Clock

Controller

Input

Capture

8 channels

Output

Compare

8 channels

CAN

Controller

External

Interrupt

16LX

CPU

MC-16 Bus

X0,X1

RST

SOT4 to SOT0

SCK4 to SCK0

SIN4 to SIN0

AN23 to AN0

AVRH

AVRL

ADTG

TIN3 to TIN0

TOT3 to TOT0

IN7 to IN0

OUT7 to OUT0

RX2 to RX0

TX2 to TX0

INT15 to INT8

External

Bus

Interface

AD15 to AD00

A23 to A16

ALE

WR/WRL

WRH

HRQ

HAK

RDY

CLK

X0A,X1A*

5 channels

10-bit

D/A converter

2 channels

DA01, DA00

FRCK0

FRCK1

8/16-bit

PPG

16/8 channels

PPGF to PPG0

Interface

SDA1, SDA0

SCL1, SCL0

3 channels

5channels

2 channels

DMAC

* : Only for MB90V340E-102

Clock

Monitor CKOT

(INT15R to INT8R)

INT7 to INT0

A/D converter

30 Kbytes

16 channels

4 channels

Timer

Free-run

Timer 1

MB90340E Series

28 DS07-13747-3E

• MB90341E(S), MB90341CE(S), MB90342E(S), MB90342CE(S), MB90F342E(S), MB90F342CE(S), MB90F343E(S),

MB90F343CE(S), MB90F345E(S), MB90F345CE(S), MB90346E(S), MB90346CE(S), MB90F346E(S), MB90F346CE(S),

MB90347E(S), MB90347CE(S), MB90F347E(S), MB90F347CE(S), MB90348E(S), MB90348CE(S), MB90349E(S),

MB90349CE(S), MB90F349E(S), MB90F349CE(S)

RAM

ROM/Flash

LIN-UART

Prescaler

8/10-bit

16/24

16-bit Reload

Free-run

Clock

Controller

Input

Capture

8 channels

Output

Compare

8 channels

CAN

Controller

External

Interrupt

16LX

CPU

F2MC-16 Bus

X0,X1

RST

SOT3 to SOT0

SCK3 to SCK0

SIN3 to SIN0

AVCC

AVSS

AN15 to AN0

AVRH

AVRL

ADTG

TIN3 to TIN0

TOT3 to TOT0

IN7 to IN0

OUT7 to OUT0

RX0, RX1*3

TX0, TX1*3

INT15 to INT8

External

Bus

Interface

AD15 to AD00

A23 to A16

ALE

WR/WRL

WRH

HRQ

HAK

RDY

CLK

X0A,X1A*1

64 K/128 K

4 channels

Free-run

FRCK0

FRCK1

8/16-bit

PPG

16/8 channels

PPGF to PPG0

4 channels

I2C

Interface

SDA1, SDA0*

SCL1, SCL0*

2 channels

AN23 to AN16*2

2 K/6 K/16 K/

20 Kbytes

256 K/384 K/

*1 : Only for devices with an S suffix in the part number

*2 : Only for devices with a C suffix in the part number

*3 : Only the MB90341E(S)/ 341CE(S)/ 342E(S)/ 34 2CE(S)/ F342E(S)/F342CE(S)/F343E(S)/F343CE(S)/

F345E(S)/F345CE(S) are equipped with 2 CAN channels

Clock

Monitor CKOT

(INT15R to INT8R)

INT7 to INT0

512 Kbytes

A/D Converter

16 channels

channels

Timer

4 channels

1/2 channels*3

Timer 0

Timer 1

DMAC

MB90340E Series

DS07-13747-3E 29

■MEMORY MAP

MB90V340E-101/102 MB90F345E(S)/F345CE(S) MB90F343E(S)/F343CE(S)

FFFFFFH

FF0000H

FEFFFFH

FE0000H

FDFFFFH

FD0000H

FCFFFFH

FC0000H

FBFFFFH

FB0000H

FAFFFFH

FA0000H

F9FFFFH

F90000H

F8FFFFH

F80000H

00FFFFH

008000H

007FFFH

007900H

0078FFH

000100H

0000EFH

000000H

FFFFFFH

FF0000H

FEFFFFH

FE0000H

FDFFFFH

FD0000H

FCFFFFH

FC0000H

FBFFFFH

FB0000H

FAFFFFH

FA0000H

F9FFFFH

F90000H

F8FFFFH

F80000H

00FFFFH

008000H

007FFFH

007900H

0050FFH

000100H

0000EFH

000000H

FFFFFFH

FF0000H

FEFFFFH

FE0000H

FDFFFFH

FD0000H

FBFFFFH

FB0000H

FAFFFFH

FA0000H

F9FFFFH

F90000H

00FFFFH

008000H

007FFFH

007900H

0050FFH

000100H

0000EFH

000000H

FCFFFFH

FC0000H

F8FFFFH

F80000H

ROM (FF bank)

ROM (FE bank)

ROM (FD bank)

ROM (FC bank)

ROM (FB bank)

ROM (FA bank)

ROM (F9 bank)

ROM (F8 bank)

ROM

(image of FF bank)

Peripheral

RAM 30 Kbytes

Peripheral

ROM (FF bank)

ROM (FE bank)

ROM (FD bank)

ROM (FC bank)

ROM (FB bank)

ROM (FA bank)

ROM (F9 bank)

ROM (F8 bank)

ROM

(image of FF bank)

Peripheral

RAM 20 Kbytes

Peripheral

External access area

External access areaExternal access area

ROM (FF bank)

ROM (FE bank)

ROM (FD bank)

ROM (FB bank)

ROM (FA bank)

ROM (F9 bank)

ROM

(image of FF bank)

Peripheral

RAM 20 Kbytes

Peripheral

External access area

: Not accessible

MB90340E Series

30 DS07-13747-3E

Note: An image of the data in the FF bank of ROM is visib le in the upper part of bank 00, which makes it possib le

for the C compiler to use the small memory model. The lower 16 bits of addresses in the FF bank are the

same as the lower 16 bi ts of addresses in the 00 bank so that tables stored in the RO M can be accessed

without using the far specifier in the pointer declaration.

For example, when the address 00C000H is accessed, the data at FFC000H in ROM is actually accessed.

The ROM area in bank FF exceeds 32 Kbytes, and its entire image cannot be shown in bank 00.

As a result, the image between FF8000H and FFFFFFH is visible in bank 00, while the image between FF0000H

and FF7FFFH is visible only in bank FF.

MB90342E(S)/342CE(S)

MB90F342E(S)/F342CE(S)

MB90349E(S)/349CE(S)

MB90F349E(S)/F349CE(S)MB90341E(S)/341CE(S)

MB90348E(S)/348CE(S)MB90347E(S)/347CE(S)

MB90F347E(S)/F347CE(S)MB90346E(S)/346CE(S)

MB90F346E(S)/F346CE(S)

FFFFFFH

FF0000H

FEFFFFH

FE0000H

FDFFFFH

FD0000H

FCFFFFH

FC0000H

0000EFH

000000H

00FFFFH

007FFFH

007900H

003FFFH

000100H

008000H

FFFFFFH

FF0000H

FEFFFFH

FE0000H

0000EFH

000000H

00FFFFH

007FFFH

007900H

003FFFH

000100H

008000H

FFFFFFH

FF0000H

FEFFFFH

FE0000H

0000EFH

000000H

00FFFFH

007FFFH

007900H

0018FFH

000100H

008000H

FFFFFFH

FF0000H

FEFFFFH

FE0000H

0000EFH

000000H

00FFFFH

007FFFH

007900H

0008FFH

000100H

008000H

ROM (FF bank)

ROM (FE bank)

ROM (FD bank)

ROM (FC bank)

External

access area

ROM (image

of FF bank)

Peripheral

RAM 16 Kbytes

External access area

Peripheral

: Not accessible

External

access area

ROM (image

of FF bank)

Peripheral

RAM 16 Kbytes

External access area

Peripheral

External

access area

ROM (image

of FF bank)

Peripheral

RAM 6 Kbytes

External access area

Peripheral

External

access area

ROM (image

of FF bank)

Peripheral

RAM 2 Kbytes

External access area

Peripheral

ROM (FF bank)

ROM (FE bank)

ROM (FF bank)

ROM (FE bank)

ROM (FF bank)

MB90340E Series

DS07-13747-3E 31

■I/O MAP

(Continued)

Address Register Abbrevi ation Access Resourc e name Initial value

000000HPort 0 Data Register PDR0 R/W Port 0 XXXXXXXXB

000001HPort 1 Data Register PDR1 R/W Port 1 XXXXXXXXB

000002HPort 2 Data Register PDR2 R/W Port 2 XXXXXXXXB

000003HPort 3 Data Register PDR3 R/W Port 3 XXXXXXXXB

000004HPort 4 Data Register PDR4 R/W Port 4 XXXXXXXXB

000005HPort 5 Data Register PDR5 R/W Port 5 XXXXXXXXB

000006HPort 6 Data Register PDR6 R/W Port 6 XXXXXXXXB

000007HPort 7 Data Register PDR7 R/W Port 7 XXXXXXXXB

000008HPort 8 Data Register PDR8 R/W Port 8 XXXXXXXXB

000009HPort 9 Data Register PDR9 R/W Port 9 XXXXXXXXB

00000AHPort A Data Register PDRA R/W Port A XXXXXXXXB

00000BHPort 5 Analog Input Enable Register ADER5 R/W Port 5, A/D 11111111B

00000CHPort 6 Analo g Input Enable Register ADER6 R/W Port 6, A/D 11111111B

00000DHPort 7 Analo g Input Enable Register ADER7 R/W Port 7, A/D 11111111B

00000EHInput Level Select Register 0 ILSR0 R/W Ports XXXXXXXXB

00000FHInput Level Select Register 1 ILSR1 R/W Ports XXXX0XXXB

000010HPort 0 Direction Register DDR0 R/W Po rt 0 00000000B

000011HPort 1 Direction Register DDR1 R/W Po rt 1 00000000B

000012HPort 2 Direction Register DDR2 R/W Po rt 2 00000000B

000013HPort 3 Direction Register DDR3 R/W Po rt 3 00000000B

000014HPort 4 Direction Register DDR4 R/W Po rt 4 00000000B

000015HPort 5 Direction Register DDR5 R/W Po rt 5 00000000B

000016HPort 6 Direction Register DDR6 R/W Po rt 6 00000000B

000017HPort 7 Direction Register DDR7 R/W Po rt 7 00000000B

000018HPort 8 Direction Register DDR8 R/W Po rt 8 00000000B

000019HPort 9 Direction Register DDR9 R/W Po rt 9 00000000B

00001AHPort A Direction Register DDRA R/W Port A 00000100B

00001BHReserved

00001CHPort 0 Pull-up Control Register PUCR0 R/W Port 0 00000000B

00001DHPort 1 Pull-up Control Register PUCR1 R/W Port 1 00000000B

00001EHPort 2 Pull-up Control Register PUCR2 R/W Po rt 2 00000000B

00001FHPort 3 Pull-up Control Register PUCR3 W, R/W Port 3 00000000B

MB90340E Series

32 DS07-13747-3E

(Continued)

Address Register Abbrev iation Access Resour ce name Initial value

000020HSerial Mode Register 0 SMR0 W,R/W

UART0

00000000B

000021HSerial Control Register 0 SCR0 W,R/W 00000000B

000022HReception/Transmission Data Register 0 RDR0/TDR 0 R/W 00000000B

000023HSerial Status Register 0 SSR0 R,R/W 00001000B

000024HExtended Communication Control

R/W 000000XXB

000025HExtended Status/Control Register 0 ESCR0 R/W 00000100B

000026HBaud Rate Generator Register 00 BGR00 R/W 00000000B

000027HBaud Rate Generator Register 01 BGR01 R/W 00000000B

000028HSerial Mode Register 1 SMR1 W,R/W

UART1

00000000B

000029HSerial Control Register 1 SCR1 W,R/W 00000000B

00002AHReception/Transmission Data Register 1 RDR1/TDR1 R/W 00000000B

00002BHSerial Status Register 1 SSR1 R,R/W 00001000B

00002CHExtended Communication Control

R/W 000000XXB

00002DHExtended Status/Control Register 1 ESCR1 R/W 00000100B

00002EHBaud Rate Generator Register 10 BGR10 R/W 00000000B

00002FHBaud Rate Generator Register 11 BGR11 R/W 00000000B

000030HPPG 0 Operation Mode Control Register PPGC0 W,R/W 16-bit PPG 0/1 0X000XX1B

000031HPPG 1 Operation Mode Control Register PPGC1 W,R/W 0X000001B

000032HPPG 0/PPG 1 Count Clock Select Register PPG01 R /W 000000X0B

000033HReserved

000034HPPG 2 Operation Mode Control Register PPGC2 W,R/W 16-bit PPG 2/3 0X000XX1B

000035HPPG 3 Operation Mode Control Register PPGC3 W,R/W 0X000001B

000036HPPG 2/PPG 3 Count Clock Select Register PPG23 R /W 000000X0B

000037HReserved

000038HPPG 4 Operation Mode Control Register PPGC4 W,R/W 16-bit PPG 4/5 0X000XX1B

000039HPPG 5 Operation Mode Control Register PPGC5 W,R/W 0X000001B

00003AHPPG 4/PPG 5 Clock Select Register P P G45 R/W 000000X0B

00003BHAddress Detect Control Register 1 PACSR1 R/W Address Match

Detection 1 00000000B

00003CHPPG 6 Operation Mode Control Register PPGC6 W,R/W 16-bit PPG 6/7 0X000XX1B

00003DHPPG 7 Operation Mode Control Register PPGC7 W,R/W 0X000001B

00003EHPPG 6/PPG 7 Count Clock Control Register PPG67 R/W 000000X0B

00003FHReserved

MB90340E Series

DS07-13747-3E 33

(Continued)

Address Register Abbreviation Access Resource name Initial value

000040HPPG 8 Operation Mode Control Register PPGC8 W,R/W

16-bit PPG 8/9

0X000XX1B

000041HPPG 9 Operation Mo de Control Register PPGC9 W,R/W 0X000001B

000042HPPG 8/PPG 9 Count Clock Control

000043HReserved

000044HPPG A Op eration Mode Cont rol Register PPGCA W,R/W

16-bit PPG A/B

0X000XX1B

000045HPPG B Op eration Mode Cont rol Register PPGCB W,R/W 0X000001B

000046HPPG A/PPG B Count Clock Select

000047HReserved

000048HPPG C O peration Mode Contro l Register PPGCC W,R/ W

16-bit PPG C/D

0X000XX1B

000049HPPG D O peration Mode Contro l Register PPGCD W,R/ W 0X000001B

00004AHPPG C/PPG D Count Clock Select

00004BHReserved

00004CHPPG E Oper ation Mode Contro l Register PPGCE W,R/W

16-bit PPG E/F

0X000XX1B

00004DHPPG F Operation Mod e Control Register PPGCF W,R/W 0X000001B

00004EHPPG E/PPG F Count Clock Select

00004FHReserved

000050HInput Captur e Control Status 0/1 ICS01 R/W Input Capture 0/1 00000000B

000051HInput Capture Edge 0/1 ICE01 R/W, R XXX0X0XXB

000052HInput Captur e Control Status 2/3 ICS23 R/W Input Capture 2/3 00000000B

000053HInput Capture Edge 2/3 ICE23 R XXXXXXXXB

000054HInput Captur e Control Status 4/5 ICS45 R/W Input Capture 4/5 00000000B

000055HInput Capture Edge 4/5 ICE45 R XXXXXXXXB

000056HInput Captur e Control Status 6/7 ICS67 R/W Input Capture 6/7 00000000B

000057HInput Capture Edge 6/7 ICE67 R/W, R XXX000XXB

000058HOutput Compare Control Status 0 OCS0 R/W Ou tp ut Com par e 0/ 1 0000XX00B

000059HOutput Compare Control Status 1 OCS1 R/W 0XX00000B

00005AHOutput Compare Control Status 2 OCS2 R/W Ou tput Com par e 2/3 0000XX00B

00005BHOutput Compare Control Status 3 OCS3 R/W 0XX00000B

00005CHOutput Compare Control Status 4 OCS4 R/W Ou tp ut Com par e 4/ 5 0000XX00B

00005DHOutput Compare Cont rol Status 5 OCS5 R/W 0XX00000B

00005EHOutput Compare Control Status 6 OCS6 R/W Ou tput Com par e 6/7 0000XX00B

00005FHOutput Compare Control Status 7 OCS7 R/W 0XX00000B

MB90340E Series

34 DS07-13747-3E

(Continued)

Address Register Abbreviation Access Resource name Initial value

000060HTimer Control Status 0 TMCSR0 R/W 16-bit Reload

Timer 0 00000000B

000061HTimer Control Status 0 TMCSR0 R/W XXXX0000B

000062HTimer Control Status 1 TMCSR1 R/W 16-bit Reload

Timer 1 00000000B

000063HTimer Control Status 1 TMCSR1 R/W XXXX0000B

000064HTimer Control Status 2 TMCSR2 R/W 16-bit Reload

Timer 2 00000000B

000065HTimer Control Status 2 TMCSR2 R/W XXXX0000B

000066HTimer Control Status 3 TMCSR3 R/W 16-bit Reload

Timer 3 00000000B

000067HTimer Control Status 3 TMCSR3 R/W XXXX0000B

000068HA/D Control Status 0 ADCS0 R/W

A/D Converter

000XXXX0B

000069HA/D Control Status 1 ADCS1 R/W 0000000XB

00006AHA/D Data 0 ADCR0 R 00000000B

00006BHA/D Data 1 ADCR1 R XXXXXX00B

00006CHADC Setting 0 ADSR0 R/W 00000000B

00006DHADC Setting 1 ADSR1 R/W 00000000B

00006EHReserved

00006FHROM Mirror Function Select ROMM W ROM Mirror XXXXXXX1B

000070H

00008FHReserved for CAN Controller 0/1. Refer to “■ CAN CONTROLLERS”

000090H

00009AHReserved

00009BHDMA Descriptor Channel Specified

DMA

00000000B

00009CHDMA Status L Register DSRL R/W 00000000B

00009DHDMA Status H Register DSRH R/W 00000000B

00009EHAddress Detect Control Register 0 PACSR0 R/W Address Match

Detection 0 00000000B

00009FHDelayed Interrupt Trigger/Release

0000A0HLow-power Mode Control Register LPMCR W,R/W Low Power

Control Circuit 00011000B

0000A1HClock Selection Register CKSCR R,R/W Low Power

Control Circuit 11111100B

0000A2H,

0000A3HReserved

0000A4HDMA Stop Status Register DSSR R/W DMA 00000000B

MB90340E Series

DS07-13747-3E 35

(Continued)

Address Register Abbrev iation Access Resource name Initial value

0000A5HAutomatic Ready Function Select

External Memory

Access

0011XX00B

0000A6HExternal Address Output Contr ol

0000A7HBus Control Signal Selection Register ECSR W 0000000XB

0000A8HWatchdog Control Register WDTC R,W Watchdog Timer XXXXX111B

0000A9HTime Base Timer Control Register TBTC W,R/W Time Base Timer 1XX00100B

0000AAHWatch Timer Control Register WTC R,R/W Watch Timer 1X001000B

0000ABHReserved

0000ACHDMA Enable L Register DERL R/W DMA 00000000B

0000ADHDMA Enable H Register DERH R/W 00000000B

0000AEHFlash Control Status Register

(Flash memory devices only.

Otherwise reserved) FMCS R,R/ W Flash Memory 000X0000B

0000AFHReserved

0000B0HInterrupt Control Register 00 ICR00 W,R/W

Interrupt Control

00000111B

0000B1HInterrup t Control Register 01 ICR01 W,R/W 00000111B

0000B2HInterrup t Control Register 02 ICR02 W,R/W 00000111B

0000B3HInterrup t Control Register 03 ICR03 W,R/W 00000111B

0000B4HInterrup t Control Register 04 ICR04 W,R/W 00000111B

0000B5HInterrup t Control Register 05 ICR05 W,R/W 00000111B

0000B6HInterrup t Control Register 06 ICR06 W,R/W 00000111B

0000B7HInterrup t Control Register 07 ICR07 W,R/W 00000111B

0000B8HInterrup t Control Register 08 ICR08 W,R/W 00000111B

0000B9HInterrup t Control Register 09 ICR09 W,R/W 00000111B

0000BAHInterrupt Control Register 10 ICR10 W,R/W 00000111B

0000BBHInterrupt Control Register 11 ICR11 W,R/W 00000111B

0000BCHInterrupt Control Register 12 ICR12 W,R/W 00000111B

0000BDHInterrupt Control Register 13 ICR13 W,R/W 00000111B

0000BEHInterrupt Control Register 14 ICR14 W,R/W 00000111B

0000BFHInterrupt Control Register 15 ICR15 W,R/W 00000111B

0000C0HD/A Converter Data 0 DAT0 R/W

D/A Converter

XXXXXXXXB

0000C1HD/A Converter Data 1 DAT1 R/W XXXXXXXXB

0000C2HD/A Control 0 DACR0 R/W XXXXXXX0B

0000C3HD/A Control 1 DACR1 R/W XXXXXXX0B

MB90340E Series

36 DS07-13747-3E

(Continued)

Address Register Abbreviation Access Resource name Initial value

0000C4H,

0000C5HReserved

0000C6HExternal Interrupt Enable 0 ENIR0 R/W

External Interrupt 0

00000000B

0000C7HExternal Interrupt Source 0 EIRR0 R/W XXXXXXXXB

0000C8HExternal Interrupt Level Setting 0 ELVR0 R/W 00000000B

0000C9HExternal Interrupt Level Setting 0 ELVR0 R/W 00000000B

0000CAHExternal Interrupt Enable 1 ENIR1 R/W

External Interrupt 1

00000000B

0000CBHExternal Interrupt Source 1 EIRR1 R/W XXXXXXXXB

0000CCHExternal Interrup t Level Setting 1 ELVR1 R/W 00000000B

0000CDHExternal Interrup t Level Setting 1 ELVR1 R/W 00000000B

0000CEHExternal Interrupt Source Select EISSR R/W 00000000B

0000CFHPLL/Sub clock Control Register PSCCR W PLL XXXX0000B

0000D0HDMA Buffer Address Pointer L Register BAPL R/W

DMA

XXXXXXXXB

0000D1HDMA Buffer Address Pointer M Register BAPM R/W XXXXXXXXB

0000D2HDMA Buffer Address Pointer H Register BAPH R/W XXXXXXXXB

0000D3HDMA Control Register DMACS R/W XXXXXXXXB

0000D4HI/O Register Address Pointer L

0000D5HI/O Register Address Pointer H

0000D6HData Counter L Register DCTL R/W XXXXXXXXB

0000D7HData Counter H Register DCTH R/W XXXXXXXXB

0000D8HSerial Mode Register 2 SMR2 W,R/W

UART2

00000000B

0000D9HSerial Control Register 2 SCR2 W,R/W 00000000B

0000DAHReception/Transmission Data

0000DBHSerial Status Register 2 SSR2 R,R/W 00001000B

0000DCHExtended Communication Control

R/W 000000XXB

0000DDHExtended Status Control Register 2 ESCR2 R/W 00000100B

0000DEHBaud Rate Generator Regis ter 20 BGR20 R/W 00000000B

0000DFHBaud R at e Gene ra to r Re gis ter 21 BGR21 R/W 00000000B

0000E0H

0000EFHReserved for CAN Controller 2. Refer to “■ CAN CONTROLLERS”

0000F0H

0000FFHExternal

MB90340E Series

DS07-13747-3E 37

(Continued)

Address Register Abbreviation Access Resource name Initial value

007900HReload Register L0 PRLL0 R/W

16-bit PPG 0/1

XXXXXXXXB

007901HReload Register H0 PRLH0 R/W XXXXXXXXB

007902HReload Register L1 PRLL1 R/W XXXXXXXXB

007903HReload Register H1 PRLH1 R/W XXXXXXXXB

007904HReload Register L2 PRLL2 R/W

16-bit PPG 2/3

XXXXXXXXB

007905HReload Register H2 PRLH2 R/W XXXXXXXXB

007906HReload Register L3 PRLL3 R/W XXXXXXXXB

007907HReload Register H3 PRLH3 R/W XXXXXXXXB

007908HReload Register L4 PRLL4 R/W

16-bit PPG 4/5

XXXXXXXXB

007909HReload Register H4 PRLH4 R/W XXXXXXXXB

00790AHReload Register L5 PRLL5 R/W XXXXXXXXB

00790BHReload Register H5 PRLH5 R/W XXXXXXXXB

00790CHReload Register L6 PRLL6 R/W

16-bit PPG 6/7

XXXXXXXXB

00790DHReload Register H6 PRLH6 R/W XXXXXXXXB

00790EHReload Register L7 PRLL7 R/W XXXXXXXXB

00790FHReload Register H7 PRLH7 R/W XXXXXXXXB

007910HReload Register L8 PRLL8 R/W

16-bit PPG 8/9

XXXXXXXXB

007911HReload Register H8 PRLH8 R/W XXXXXXXXB

007912HReload Register L9 PRLL9 R/W XXXXXXXXB

007913HReload Register H9 PRLH9 R/W XXXXXXXXB

007914HReload Register LA PRLLA R/W

16-bit PPG A/B

XXXXXXXXB

007915HReload Register HA PRLHA R/W XXXXXXXXB

007916HReload Register LB PRLLB R/W XXXXXXXXB

007917HReload Register HB PRLHB R/W XXXXXXXXB

007918HReload Register LC PRLLC R/W

16-bit PPG C/D

XXXXXXXXB

007919HReload Register HC PRLHC R/W XXXXXXXXB

00791AHReload Register LD PRLLD R/W XXXXXXXXB

00791BHReload Register HD PRLHD R/W XXXXXXXXB

00791CHReload Register LE PRLLE R/W

16-bit PPG E/F

XXXXXXXXB

00791DHReload Register HE PRLHE R/W XXXXXXXXB

00791EHReload Register LF PRLLF R/W XXXXXXXXB

00791FHReload Register HF PRLHF R/W XXXXXXXXB

007920HInput Capture 0 IPCP0 R

Input Capture 0/1

XXXXXXXXB

007921HInput Capture 0 IPCP0 R XXXXXXXXB

007922HInput Capture 1 IPCP1 R XXXXXXXXB

007923HInput Capture 1 IPCP1 R XXXXXXXXB

MB90340E Series

38 DS07-13747-3E

(Continued)

Address Register Abbreviation Access Resource name Initial value

007924HInput Capture 2 IPCP2 R

Input Capture 2/3

XXXXXXXXB

007925HInput Capture 2 IPCP2 R XXXXXXXXB

007926HInput Capture 3 IPCP3 R XXXXXXXXB

007927HInput Capture 3 IPCP3 R XXXXXXXXB

007928HInput Capture 4 IPCP4 R

Input Capture 4/5

XXXXXXXXB

007929HInput Capture 4 IPCP4 R XXXXXXXXB

00792AHInput Capture 5 IPCP5 R XXXXXXXXB

00792BHInput Capture 5 IPCP5 R XXXXXXXXB

00792CHInput Capture 6 IPCP6 R

Input Capture 6/7

XXXXXXXXB

00792DHInput Capture 6 IPCP6 R XXXXXXXXB

00792EHInput Capture 7 IPCP7 R XXXXXXXXB

00792FHInput Capture 7 IPCP7 R XXXXXXXXB

007930HOutput Compare 0 OCCP0 R/W

Output Compare 0/1

XXXXXXXXB

007931HOutput Compare 0 OCCP0 R/W XXXXXXXXB

007932HOutput Compare 1 OCCP1 R/W XXXXXXXXB

007933HOutput Compare 1 OCCP1 R/W XXXXXXXXB

007934HOutput Compare 2 OCCP2 R/W

Output Compare 2/3

XXXXXXXXB

007935HOutput Compare 2 OCCP2 R/W XXXXXXXXB

007936HOutput Compare 3 OCCP3 R/W XXXXXXXXB

007937HOutput Compare 3 OCCP3 R/W XXXXXXXXB

007938HOutput Compare 4 OCCP4 R/W

Output Compare 4/5

XXXXXXXXB

007939HOutput Compare 4 OCCP4 R/W XXXXXXXXB

00793AHOutput Compare 5 OCCP5 R/W XXXXXXXXB

00793BHOutput Compare 5 OCCP5 R/W XXXXXXXXB

00793CHOutput Compare 6 OCCP6 R/W

Output Compare 6/7

XXXXXXXXB

00793DHOutput Compare 6 OCCP6 R/W XXXXXXXXB

00793EHOutput Compare 7 OCCP7 R/W XXXXXXXXB

00793FHOutput Compare 7 OCCP7 R/W XXXXXXXXB

007940HTimer Data 0 TCDT0 R/W

Free-run Timer 0

00000000B

007941HTimer Data 0 TCDT0 R/W 00000000B

007942HTimer Control Status 0 TCCSL0 R/W 00000000B

007943HTimer Control Status 0 TCCSH0 R/W 0XXXXXXXB

007944HTimer Data 1 TCDT1 R/W

Free-run Timer 1

00000000B

007945HTimer Data 1 TCDT1 R/W 00000000B

007946HTimer Control Status 1 TCCSL1 R/W 00000000B

007947HTimer Control Status 1 TCCSH1 R/W 0XXXXXXXB

MB90340E Series

DS07-13747-3E 39

(Continued)

Address Register Abbreviation Access Resource name Initial value

007948HTimer 0/Reload 0 TMR0/

TMRLR0 R/W 16-bit Reload

Timer 0 XXXXXXXXB

007949HR/W XXXXXXXXB

00794AHTimer 1/Reload 1 TMR1/

TMRLR1 R/W 16-bit Reload

Timer 1 XXXXXXXXB

00794BHR/W XXXXXXXXB

00794CHTimer 2/Reload 2 TMR2/

TMRLR2 R/W 16-bit Reload

Timer 2 XXXXXXXXB

00794DHR/W XXXXXXXXB

00794EHTimer 3/Reload 3 TMR3/

TMRLR3 R/W 16-bit Reload

Timer 3 XXXXXXXXB

00794FHR/W XXXXXXXXB

007950HSerial Mode Register 3 SMR3 W,R/W

UART3

00000000B

007951HSerial Control Register 3 SCR3 W,R/W 00000000B

007952HReception/Transmission Data

007953HSerial Status Register 3 SSR3 R,R/W 00001000B

007954HExtended Communication Control

R/W 000000XXB

007955HExtended Status Control Register ESCR3 R/W 00000100B

007956HBaud Rate Generator Re gis ter 30 BGR3 0 R/W 00000000B

007957HBaud Rate Generator Re gis ter 31 BGR3 1 R/W 00000000B

007958HSerial Mode Register 4 SMR4 W,R/W

UART4

00000000B

007959HSerial Control Register 4 SCR4 W,R/W 00000000B

00795AHReception/ Transmission Data

00795BHSerial Status Register 4 SSR4 R,R/W 00001000B

00795CHExtended Communication Control

R/W 000000XXB

00795DHExtended Status Control Regi ster ESCR4 R/W 00000100B

00795EHBaud Rate Generator Register 40 BGR40 R/W 000 00 0 00 B

00795FHBaud Rate Generator Re gister 41 BGR41 R/W 000000 00 B

007960H

00796BHReserved

00796CHClock Output Enable Register CLKR R/W Clock Monitor XXXX0000B

00796DHReserved

00796EHCAN Direct Mode Register CDMR R/W CAN Clock sync XXXXXXX0B

00796FHCAN Switch Register CANSWR R/W CAN 0/1 XXXXXX00B

MB90340E Series

40 DS07-13747-3E

(Continued)

Address Regis ter Abbrev iation Access Resource name Initial value

007970HI2C Bus Status Register 0 IBSR0 R

I2C Interface 0

00000000B

007971HI2C Bus Control Register 0 IBCR0 W,R/W 00000000B

007972HI2C 10-bit Slave Address Register 0 ITBAL0 R/W 00000000B

007973HITBAH0 R/W 00000000B

007974HI2C 10-bit Slave Address Mask

007975HITMKH0 R/W 00111111B

007976HI2C 7-bit Slave Address Register 0 ISBA0 R/W 00000000B

007977HI2C 7-bit Slave Address Mask Register 0 ISMK0 R/W 01111111B

007978HI2C Data Register 0 IDAR0 R/W 00000000B

007979H,

00797AHReserved

00797BHI2C Clock Control Register 0 ICCR0 R/W I2C Interface 0 00011111B

00797CH

00797FHReserved

007980HI2C Bus Status Register 1 IBSR1 R

I2C Interface 1

00000000B

007981HI2C Bus Control Register 1 IBCR1 W,R/W 00000000B

007982HI2C 10-bit Slave Address Register 1 ITBAL1 R/W 00000000B

007983HITBAH1 R/W 00000000B

007984HI2C 10-bit Slave Address Mask

007985HITMKH1 R/W 00111111B

007986HI2C 7-bit Slave Address Register 1 ISBA1 R/W 00000000B

007987HI2C 7-bit Slave Address Mask Register 1 ISMK1 R/W 01111111B

007988HI2C Data Register 1 IDAR1 R/W 00000000B

007989H,

00798AHReserved

00798BHI2C Clock Control Register 1 ICCR1 R/W I2C Interface 1 00011111B

00798CH

0079C1HReserved

0079C2HClock Modulator Control Register CMCR R, R/W Clock Modulator 0001X000B

0079C3H

0079DFHReserved

MB90340E Series

DS07-13747-3E 41

(Continued)

Notes : • Initial value of “X” represents unknown value.

• Any write access to reserved ad dresses in I/ O map should n ot be performed. A read access to reserved

addresses results in reading “X”.

Address Register Abbreviation Access Resource name Initial value

0079E0HDetect Address Setting 0 PADR0 R/W

Address Match

Detecti on 0

XXXXXXXXB

0079E1HDetect Address Setting 0 PADR0 R/W XXXXXXXXB

0079E2HDetect Address Setting 0 PADR0 R/W XXXXXXXXB

0079E3HDetect Address Setting 1 PADR1 R/W XXXXXXXXB

0079E4HDetect Address Setting 1 PADR1 R/W XXXXXXXXB

0079E5HDetect Address Setting 1 PADR1 R/W XXXXXXXXB

0079E6HDetect Address Setting 2 PADR2 R/W XXXXXXXXB

0079E7HDetect Address Setting 2 PADR2 R/W XXXXXXXXB

0079E8HDetect Address Setting 2 PADR2 R/W XXXXXXXXB

0079E9H

0079EFHReserved

0079F0HDetect Address Setting 3 PADR3 R/W

Address Match

Detecti on 1

XXXXXXXXB

0079F1HDetect Address Setting 3 PADR3 R/W XXXXXXXXB

0079F2HDetect Address Setting 3 PADR3 R/W XXXXXXXXB

0079F3HDetect Address Setting 4 PADR4 R/W XXXXXXXXB

0079F4HDetect Address Setting 4 PADR4 R/W XXXXXXXXB

0079F5HDetect Address Setting 4 PADR4 R/W XXXXXXXXB

0079F6HDetect Address Setting 5 PADR5 R/W XXXXXXXXB

0079F7HDetect Address Setting 5 PADR5 R/W XXXXXXXXB

0079F8HDetect Address Setting 5 PADR5 R/W XXXXXXXXB

0079F9H

0079FFHReserved

007A00H

007AFFHReserved for CAN Controller 0. Refer to “■ CAN CONTROLLERS”

007B00H

007BFFHReserved for CAN Controller 0. Refer to “■ CAN CONTROLLERS”

007C00H

007CFFHReserved for CAN Controller 1. Refer to “■ CAN CONTROLLERS”

007D00H

007DFFHReserved for CAN Controller 1. Refer to “■ CAN CONTROLLERS”

007E00H

007FFFHReserved

MB90340E Series

42 DS07-13747-3E

■CAN CONTROLLERS

The CAN controller has the following features:

• Conforms to CAN Specification Version 2.0 Part A and B

• Supports transmission/reception in standard frame and extended frame formats

• Supports transmission of data frames by receiving remote frames

• 16 transmission/reception message buffers

• 29-bit ID and 8-byte data

• Multi-level message buffer configuration

• Provides full-bit comparison, full-bit mask, acceptance register 0/acceptance register 1 for each message

buffer as ID acceptance mask

• Two acceptance mask registers in either standard frame format or extended frame formats

• Bit rate programmable from 10 kbps to 2 Mbps (when input clock is at 16 MHz)

List of Control Registers (1)

Address Register Abbreviation Access Initial Value

CAN0 CAN1

000070H000080HMessage Buffer

Valid Register BVALR R/W 00000000B

00000000B

000071H000081H

000072H000082HTransmit Request

00000000B

000073H000083H

000074H000084HTransmit Cancel

00000000B

000075H000085H

000076H000086HTransmission

Complete Register TCR R/W 00000000B

00000000B

000077H000087H

000078H000088HReceive Complete

00000000B

000079H000089H

00007AH00008AHRemote Request

Receiving Regist er RRTRR R/W 00000000B

00000000B

00007BH00008BH

00007CH00008CHReceive Over run

00000000B

00007DH00008DH

00007EH00008EHReception Interrupt

Enable Register RIER R/W 00000000B

00000000B

00007FH00008FH

MB90340E Series

DS07-13747-3E 43

List of Control Registers (2)

Address Register Abbreviation Access Initial Value

CAN0 CAN1

007B00H007D00HControl Status

R/W, R 0XXXX0X1B

00XXX000B

007B01H007D01H

007B02H007D02HLast Event

Indicator Register LEIR R/W 000X0000B

XXXXXXXXB

007B03H007D03H

007B04H007D04HReceive And Transmit

Error Counter RTEC R 00000000B

00000000B

007B05H007D05H

007B06H007D06HBit Timing

X1111111B

007B07H007D07H

007B08H007D08HIDE Register IDER R/W XXXXXXXXB

XXXXXXXXB

007B09H007D09H

007B0AH007D0AHTransmit RTR

00000000B

007B0BH007D0BH

007B0CH007D0CHRemote Frame

Receive Waiting

XXXXXXXXB

007B0DH007D0DH

007B0EH007D0EHTransmit Interrupt

Enable Register TIER R/W 00000000B

00000000B

007B0FH007D0FH

007B10H007D10H

Acceptance Mask

Select Register AMSR R/W

XXXXXXXXB

007B11H007D11H

007B12H007D12HXXXXXXXXB

XXXXXXXXB

007B13H007D13H

007B14H007D14H

Acceptance Mask

XXXXXXXXB

007B15H007D15H

007B16H007D16HXXXXXXXXB

XXXXXXXXB

007B17H007D17H

007B18H007D18H

Acceptance Mask

XXXXXXXXB

007B19H007D19H

007B1AH007D1AHXXXXXXXXB

XXXXXXXXB

007B1BH007D1BH

MB90340E Series

44 DS07-13747-3E

List of Message Buffers (ID Registers) (1)

Address Register Abbre viation Access Initial Value

CAN0 CAN1

007A00H

007A1FH

007C00H

007C1FH

General-

Purpose RAM ⎯R/W XXXXXXXXB

XXXXXXXXB

007A20H007C20H

ID Register 0 IDR0 R/W

XXXXXXXXB

007A21H007C21H

007A22H007C22HXXXXXXXXB

XXXXXXXXB

007A23H007C23H

007A24H007C24H

ID Register 1 IDR1 R/W

XXXXXXXXB

007A25H007C25H

007A26H007C26HXXXXXXXXB

XXXXXXXXB

007A27H007C27H

007A28H007C28H

ID Register 2 IDR2 R/W

XXXXXXXXB

007A29H007C29H

007A2AH007C2AHXXXXXXXXB

XXXXXXXXB

007A2BH007C2BH

007A2CH007C2CH

ID Register 3 IDR3 R/W

XXXXXXXXB

007A2DH007C2DH

007A2EH007C2EHXXXXXXXXB

XXXXXXXXB

007A2FH007C2FH

007A30H007C30H

ID Register 4 IDR4 R/W

XXXXXXXXB

007A31H007C31H

007A32H007C32HXXXXXXXXB

XXXXXXXXB

007A33H007C33H

007A34H007C34H

ID Register 5 IDR5 R/W

XXXXXXXXB

007A35H007C35H

007A36H007C36HXXXXXXXXB

XXXXXXXXB

007A37H007C37H

007A38H007C38H

ID Register 6 IDR6 R/W

XXXXXXXXB

007A39H007C39H

007A3AH007C3AHXXXXXXXXB

XXXXXXXXB

007A3BH007C3BH

007A3CH007C3CH

ID Register 7 IDR7 R/W

XXXXXXXXB

007A3DH007C3DH

007A3EH007C3EHXXXXXXXXB

XXXXXXXXB

007A3FH007C3FH

MB90340E Series

DS07-13747-3E 45

List of Message Buffers (ID Registers) (2)

Address Register Abbrev iation Access Initial Value

CAN0 CAN1

007A40H007C40H

ID Register 8 IDR8 R/W

XXXXXXXXB

007A41H007C41H

007A42H007C42HXXXXXXXXB

XXXXXXXXB

007A43H007C43H

007A44H007C44H

ID Register 9 IDR9 R/W

XXXXXXXXB

007A45H007C45H

007A46H007C46HXXXXXXXXB

XXXXXXXXB

007A47H007C47H

007A48H007C48H

ID Register 10 IDR10 R/W

XXXXXXXXB

007A49H007C49H

007A4AH007C4AHXXXXXXXXB

XXXXXXXXB

007A4BH007C4BH

007A4CH007C4CH

ID Register 11 IDR11 R/W

XXXXXXXXB

007A4DH007C4DH

007A4EH007C4EHXXXXXXXXB

XXXXXXXXB

007A4FH007C4FH

007A50H007C50H

ID Register 12 IDR12 R/W

XXXXXXXXB

007A51H007C51H

007A52H007C52HXXXXXXXXB

XXXXXXXXB

007A53H007C53H

007A54H007C54H

ID Register 13 IDR13 R/W

XXXXXXXXB

007A55H007C55H

007A56H007C56HXXXXXXXXB

XXXXXXXXB

007A57H007C57H

007A58H007C58H

ID Register 14 IDR14 R/W

XXXXXXXXB

007A59H007C59H

007A5AH007C5AHXXXXXXXXB

XXXXXXXXB

007A5BH007C5BH

007A5CH007C5CH

ID Register 15 IDR15 R/W

XXXXXXXXB

007A5DH007C5DH

007A5EH007C5EHXXXXXXXXB

XXXXXXXXB

007A5FH007C5FH

MB90340E Series

46 DS07-13747-3E

List of Message Buffers (DLC Registers and Data Registers) (1)

Address Register Abbre viation Access Initial Value

CAN0 CAN1

007A60H007C60HDLC Register 0 DLCR0 R/W XXXXXXXXB

007A61H007C61H

007A62H007C62HDLC Register 1 DLCR1 R/W XXXXXXXXB

007A63H007C63H

007A64H007C64HDLC Register 2 DLCR2 R/W XXXXXXXXB

007A65H007C65H

007A66H007C66HDLC Register 3 DLCR3 R/W XXXXXXXXB

007A67H007C67H

007A68H007C68HDLC Register 4 DLCR4 R/W XXXXXXXXB

007A69H007C69H

007A6AH007C6AHDLC Register 5 DLCR5 R/W XXXXXXXXB

007A6BH007C6BH

007A6CH007C6CHDLC Register 6 DLCR6 R/W XXXXXXXXB

007A6DH007C6DH

007A6EH007C6EHDLC Register 7 DLCR7 R/W XXXXXXXXB

007A6FH007C6FH

007A70H007C70HDLC Register 8 DLCR8 R/W XXXXXXXXB

007A71H007C71H

007A72H007C72HDLC Register 9 DLCR9 R/W XXXXXXXXB

007A73H007C73H

007A74H007C74HDLC Register 10 DLCR10 R/W XXXXXXXXB

007A75H007C75H

007A76H007C76HDLC Register 11 DLCR11 R/W XXXXXXXXB

007A77H007C77H

007A78H007C78HDLC Register 12 DLCR12 R/W XXXXXXXXB

007A79H007C79H

007A7AH007C7AHDLC Register 13 DLCR13 R/W XXXXXXXXB

007A7BH007C7BH

007A7CH007C7CHDLC Register 14 DLCR14 R/W XXXXXXXXB

007A7DH007C7DH

007A7EH007C7EHDLC Register 15 DLCR15 R/W XXXXXXXXB

007A7FH007C7FH

MB90340E Series

DS07-13747-3E 47

List of Message Buffers (DLC Registers and Data Registers) (2)

Address Register Abbreviation Access Initial Value

CAN0 CAN1

007A80H

007A87H

007C80H

007C87H

Data Register 0

(8 bytes) DTR0 R/W XXXXXXXXB

XXXXXXXXB

007A88H

007A8FH

007C88H

007C8FH

Data Register 1

(8 bytes) DTR1 R/W XXXXXXXXB

XXXXXXXXB

007A90H

007A97H

007C90H

007C97H

Data Register 2

(8 bytes) DTR2 R/W XXXXXXXXB

XXXXXXXXB

007A98H

007A9FH

007C98H

007C9FH

Data Register 3

(8 bytes) DTR3 R/W XXXXXXXXB

XXXXXXXXB

007AA0H

007AA7H

007CA0H

007CA7H

Data Register 4

(8 bytes) DTR4 R/W XXXXXXXXB

XXXXXXXXB

007AA8H

007AAFH

007CA8H

007CAFH

Data Register 5

(8 bytes) DTR5 R/W XXXXXXXXB

XXXXXXXXB

007AB0H

007AB7H

007CB0H

007CB7H

Data Register 6

(8 bytes) DTR6 R/W XXXXXXXXB

XXXXXXXXB

007AB8H

007ABFH

007CB8H

007CBFH

Data Register 7

(8 bytes) DTR7 R/W XXXXXXXXB

XXXXXXXXB

007AC0H

007AC7H

007CC0H

007CC7H

Data Register 8

(8 bytes) DTR8 R/W XXXXXXXXB

XXXXXXXXB

007AC8H

007ACFH

007CC8H

007CCFH

Data Register 9

(8 bytes) DTR9 R/W XXXXXXXXB

XXXXXXXXB

007AD0H

007AD7H

007CD0H

007CD7H

Data Register 10

(8 bytes) DTR10 R/W XXXXXXXXB

XXXXXXXXB

007AD8H

007ADFH

007CD8H

007CDFH

Data Register 11

(8 bytes) DTR11 R/W XXXXXXXXB

XXXXXXXXB

007AE0H

007AE7H

007CE0H

007CE7H

Data Register 12

(8 bytes) DTR12 R/W XXXXXXXXB

XXXXXXXXB

007AE8H

007AEFH

007CE8H

007CEFH

Data Register 13

(8 bytes) DTR13 R/W XXXXXXXXB

XXXXXXXXB

MB90340E Series

48 DS07-13747-3E

List of Message Buffers (DLC Registers and Data Registers) (3)

Address Register Abbreviation Access Initial Value

CAN0 CAN1

007AF0H

007AF7H

007CF0H

007CF7H

Data Register 14

(8 bytes) DTR14 R/W XXXXXXXXB

XXXXXXXXB

007AF8H

007AFFH

007CF8H

007CFFH

Data Register 15

(8 bytes) DTR15 R/W XXXXXXXXB

XXXXXXXXB

MB90340E Series

DS07-13747-3E 49

■INTERRUPT FACTORS, INTERRUPT VECTORS, INTERRUPT CONTROL REGISTER

(Continued)

Interrupt cause EI2OS

Support

DMA

channel

number

Interrupt vector Interrupt control

Number Address Number Address

Reset N ⎯#08 FFFFDCH⎯⎯

INT9 instruction N ⎯#09 FFFFD8H⎯⎯

Exception N ⎯#10 FFFFD4H⎯⎯

CAN 0 RX N ⎯#11 FFFFD0HICR00 0000B0H

CAN 0 TX/NS N ⎯#12 FFFFCCH

CAN 1 RX / Input Capture 6 Y1 ⎯#13 FFFFC8HICR01 0000B1H

CAN 1 TX/NS / Input Capture 7 Y1 ⎯#14 FFFFC4H

CAN 2 RX / I2C0 N ⎯#15 FFFFC0HICR02 0000B2H

CAN 2 TX/NS N ⎯#16 FFFFBCH

16-bit Reload Timer 0 Y1 0 #17 FFFFB8HICR03 0000B3H

16-bit Reload Timer 1 Y1 1 #18 FFFFB4H

16-bit Reload Timer 2 Y1 2 #19 FFFFB0HICR04 0000B4H

16-bit Reload Timer 3 Y1 ⎯#20 FFFFACH

PPG 0/1/4/5 N ⎯#21 FFFFA8HICR05 0000B5H

PPG 2/3/6/7 N ⎯#22 FFFFA4H

PPG 8/9/C/D N ⎯#23 FFFFA0HICR06 0000B6H

PPG A/B/E/F N ⎯#24 FFFF9CH

Time Base Timer N ⎯#25 FFFF98HICR07 0000B7H

External Interrupt 0 to 3, 8 to 11 Y1 3 #26 FFFF94H

Watch Timer N ⎯#27 FFFF90HICR08 0000B8H

External Interrupt 4 to 7, 12 to 15 Y1 4 #28 FFFF8CH

A/D Converter Y1 5 #29 FFFF88HICR09 0000B9H

Free-run Timer 0 / Free-run Timer 1 N ⎯#30 FFFF84H

Input Ca pture 4/5 / I2C1 Y1 6 #31 FFFF80HICR10 0000BAH

Output Compare 0/1/4/5 Y1 7 #32 FFFF7CH

Input Capture 0 to 3 Y1 8 #33 FFFF78HICR11 0000BBH

Output Compare 2/3/6/7 Y1 9 #34 FFFF74H

UART 0 RX Y2 10 #35 FFFF70HICR12 0000BCH

UART 0 TX Y1 11 #36 FFFF6CH

UART 1 RX / UART 3 RX Y2 12 #37 FFFF68HICR13 0000BDH

UART 1 TX / UART 3 TX Y1 13 #38 FFFF64H

MB90340E Series

50 DS07-13747-3E

(Continued)

Y1 : Usable

Y2 : Usable, with EI2OS stop function

N : Unusable

Notes : •The peripheral resources sharing the ICR register ha ve the same interrupt level.

•When two peripheral resources share the ICR register , only one can use Extended Intelligent I/O Service

at a time.

•When either of the two peripheral re sources sharing the ICR register specifies Extended Intelligent I/O

Serv ice, the other one cannot use interrupts.

Interrupt cause EI2OS

Support

DMA

channel

number

Interrupt vector Interrupt control

Number Address Number Address

UART 2 RX / UART 4 RX Y2 14 #39 FFFF60HICR14 0000BEH

UART 2 TX / UART 4 TX Y1 15 #40 FFFF5CH

Flash Memory N ⎯#41 FFFF58HICR15 0000BFH

Delayed Interrupt N ⎯#42 FFFF54H

MB90340E Series

DS07-13747-3E 51

■ELECTRICAL CHARACTERISTICS

1. Absolute Maximum Ratings

*1:This parameter is based on VSS = AVSS = 0 V

*2:Set AVCC and VCC to the same voltage. Make sure that AVCC does not ex ceed VCC and that the voltage at the

analog inputs does not exceed AVCC when the pow er is switched on.

*3:VI and VO should no t exceed VCC + 0.3 V. VI should not exceed the specified ratings. However if the maximum

current to/from an input is limited b y some means with e xternal components, the ICLAMP rating supe rsedes the VI

rating.

*4:Applicable to pins: P00 to P07, P10 to P17, P20 to P27, P30 to P37, P40 to P47, P50 to P57, P60 to P67,

P70 to P77, P80 to P87, P90 to P97, PA0, PA1

*5: • Applicable to pins: P00 to P07, P10 to P17, P20 to P27, P30 to P37, P40 to P47,

P50 to P57 (Evaluation device : P50 to P55) , P60 to P67, P70 to P77, P80 to P87,

P90 to P97, PA0 to PA1

• Use within recommended op erating conditions.

• Use with DC voltage (current)

• The +B signal should always be app lied by using a limiting re sistance placed betwee n t he +B sign al a nd the

microcontroller.

• The value of the limiting resistance should be set so that when the +B signal is applied, the input current to

the microcontroller pin does not exceed the rated value, either instantaneously or for pr olonged periods.

• Note that when the microcontroller drive current is low, such as in the pow er saving modes, the +B input

potential may pass through th e protective d iode and incre ase the potent ial at the V CC pi n, and this may affect

other devices. (Continued)

Parameter Symbol Rating Unit Remarks

Min Max

Power supply voltage*1

VCC VSS − 0.3 VSS + 6.0 V

AVCC VSS − 0.3 VSS + 6.0 V V CC = AVCC*2

AVRH,

AVRL VSS − 0.3 VSS + 6.0 V AVCC ≥ AVRH, AVCC ≥ AVRL,

AVRH ≥ AVRL

Input voltage*1VIVSS − 0.3 VSS + 6.0 V *3

Output voltage*1VOVSS − 0.3 VSS + 6.0 V *3

Maximum Clamp C urre nt ICLAMP −4.0 +4.0 mA *5

Total Maximum Clamp Current Σ|ICLAMP|⎯40 mA *5

“L” level maximum output cur rent IOL ⎯15 mA *4

“L” level average output current IOLAV ⎯4mA*4

“L” level maximum overa ll output curr ent ΣIOL ⎯100 mA *4

“L” level average overall output current ΣIOLAV ⎯50 mA *4

“H” level maximum output current IOH ⎯−15 mA *4

“H” level average output current IOHAV ⎯−4mA*4

“H” level maximum overall output current ΣIOH ⎯−100 mA *4

“H” level average overall output current ΣIOHAV ⎯−50 mA *4

Power consumption PD⎯450 mW

Operating temperature TA−40 +105 °C

Storage temperature TSTG −55 +150 °C

MB90340E Series

52 DS07-13747-3E

(Continued)

• Note that if a +B signal is input when the microcontroller power supply is off (not fixed at 0 V) , the power

supply is provided from the pins, so that incomplete operation may result.

• Note that if the +B input is applied during power-on, the power supply is provided from the pins and the

resulting supply voltage may not be sufficient to operate the power-on reset.

• Care must be taken not to leave the +B input pin open.

• Sample recommended circuits:

WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,

temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.

P-ch

N-ch

VCC

• Input/o utput equivalent circuits

+B input (0 V to 16 V)

Limiting

resistance

Protective diode

MB90340E Series

DS07-13747-3E 53

2. Recommended Operating Conditions (VSS = AVSS = 0 V)

WARNING: The recommended opera ting conditions are required in order to ensure the normal operation of

the semiconducto r device. All of the device's electrical characteristics are warranted when the

device is operated within these ranges.

Always use semiconductor devices within their recommended operating cond ition ranges.

Operation outside these ranges may adversely affect reliability and could result in device failure.

No warranty is made with respect to uses, operating conditions, or combinations not represented

on the data shee t. Users consider ing application outside th e listed cond itions are advised t o contact

their representatives before hand.

Parameter Symbol Value Unit Remarks

Min Typ Max

Power supply voltage VCC,

AVCC

4.0 5.0 5.5 V Under normal operation

3.5 5.0 5.5 V Under normal operation, when not using

the A/D converter and not Flash

programming.

4.5 5.0 5.5 V When External bus is used.

3.0 ⎯5.5 V Maintains RAM data in stop mode

Smoothing capacitor CS0.1 ⎯1.0 µF

Use a ceramic capacitor or capacitor of

better AC characteristics. Capacitor at

the VCC should be greater than this

capacitor.

Operating temperature TA−40 ⎯+105 °C

C Pin Connection Diagram

MB90340E Series

54 DS07-13747-3E

3. DC Characteristics (TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = AVSS = 0 V)

(Continued)

Parameter Sym-

bol Pin Condition Value Unit Remarks

Min Typ Max

Input H

voltage

(At VCC =

5 V ± 10%)

VIHS ⎯⎯0.8 VCC ⎯VCC + 0.3 V

Port inputs if CMOS

hysteresis input levels are

selected (except P12, P44,

P45, P46, P47, P50, P82,

P85)

VIHA ⎯⎯0.8 VCC ⎯VCC + 0.3 V Port inputs if

Automotive input levels are

selected

VIHT ⎯⎯2.0 ⎯VCC + 0.3 V Port inputs if TTL input levels

are selected

VIHS ⎯⎯0.7 VCC ⎯VCC + 0.3 V P12, P50, P82, P85

inputs if CMOS input levels

are selected

VIHI ⎯⎯0.7 VCC ⎯VCC + 0.3 V P44, P45, P46, P47

inputs if CMOS hysteresis

input levels are selected

VIHR ⎯⎯0.8 VCC ⎯VCC + 0.3 V RST input pin

(CMOS hysteresis)

VIHM ⎯⎯VCC − 0.3 ⎯VCC + 0.3 V MD input pin

Input L

voltage

(At VCC =

5 V ± 10%)

VILS ⎯⎯VSS − 0.3 ⎯0.2 VCC V

Port inputs if CMOS

hysteresis input levels are

selected (except P12, P44,

P45, P46, P47, P50, P82,

P85)

VILA ⎯⎯VSS − 0.3 ⎯0.5 VCC VPort inputs if

Automotive input levels are

selected

VILT ⎯⎯VSS − 0.3 ⎯0.8 V Port inputs if TTL

input levels are selected

VILS ⎯⎯VSS − 0.3 ⎯0.3 VCC VP12, P50, P82, P85

inputs if CMOS input levels

are selected

VILI ⎯⎯VSS − 0.3 ⎯0.3 VCC VP44, P45, P46, P47

inputs if CMOS hysteresis

input levels are selected

VILR ⎯⎯VSS − 0.3 ⎯0.2 VCC VRST input pin

(CMOS hysteresis)

VILM ⎯⎯VSS − 0.3 ⎯VSS + 0.3 V MD input pin

Output H

voltage VOH Normal

outputs VCC = 4.5 V,

IOH = −4.0 mA VCC − 0.5 ⎯⎯ V

Output H

voltage VOHI I2C current

outputs VCC = 4.5 V,

IOH = −3.0 mA VCC − 0.5 ⎯⎯ V

Output L

voltage VOL Normal

outputs VCC = 4.5 V,

IOL = 4.0 mA ⎯⎯0.4 V

Output L

voltage VOLI I2C current

outputs VCC = 4.5 V,

IOL = 3.0 mA ⎯⎯0.4 V

MB90340E Series

DS07-13747-3E 55

(Continued) (TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = AVSS = 0 V)

* : The power supply current is measured with an external clock.

Parameter Sym-

bol Pin Condition Value Unit Remarks

Min Typ Max

Input leak current IIL ⎯VCC = 5.5 V, VSS < VI < VCC −1⎯+1µA

Pull-up

resistance RUP

P00 to P07,

P10 to P17,

P20 to P27,

P30 to P37,

RST

⎯25 50 100 kΩ

Pull-down

resistance RDOWN MD2 ⎯25 50 100 kΩ

Except

Flash

memory

devices

Power supply

current*

ICC

VCC

VCC = 5.0 V,

Internal frequency : 24 MHz,

At normal operation. ⎯55 70 mA

VCC = 5.0 V,

Internal frequency : 24 MHz,

At writing Flash memo ry. ⎯70 85 mA Flash

memory

devices

VCC = 5.0 V,

Internal frequency : 24 MHz,

At erasing Flash memory. ⎯75 90 mA Flash

memory

devices

ICCS VCC = 5.0 V,

Internal frequency : 24 MHz,

In Sleep mode. ⎯25 35 mA

ICTS VCC = 5.0 V,

Internal fr equency : 2 MHz,

In Main Timer mode ⎯0.3 0.8 mA

ICTSPLL6

VCC = 5.0 V,

Internal frequency : 24 MHz,

In PLL Timer mode,

external frequency = 4 MHz

⎯47mA

ICCL

VCC = 5.0 V

Internal frequency : 8 kHz,

In sub operation

TA = +25°C

⎯70 140 µA

ICCLS

VCC = 5.0 V

Internal frequency : 8 kHz,

In sub sleep

TA = +25°C

⎯20 50 µA

ICCT

VCC = 5.0 V

Internal frequency : 8 kHz,

In watch mode

TA = +25°C

⎯10 35 µA

ICCH VCC = 5.0 V,

In Stop mode,

TA = +25°C⎯725µA

Input capacita nce CIN

Other than C,

AVCC, AVSS,

AVRH, AVRL,

VCC, VSS

⎯⎯515pF

MB90340E Series

56 DS07-13747-3E

4. AC Characteristics

(1) Clock Timing (TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = AVSS = 0 V)

* : When selecting the PLL clock, the range of clock frequency is limited. Use this product with in the range as

mentioned in “Relation between the exter nal clock frequency and machine clock frequency”.

Parameter Symbol Pin Value Unit Remarks

Min Typ Max

Clock frequency fCX0, X1

3⎯16 MHz When using an oscillation

circuit

4⎯16 MHz PLL multiplied by 1

When using an oscillation

circuit

4⎯12 MHz PLL multiplied by 2

When using an oscillation

circuit

4⎯8MHz

PLL multiplied by 3

When using an oscillation

circuit

4⎯6MHz

PLL multiplied by 4

When using an oscillation

circuit

⎯⎯ 4MHz

PLL multiplied by 6

When using an oscillation

circuit

3⎯24 MHz When using an external

clock*

fCL X0A, X1A — 32.768 100 kHz

Clock cycle time tCYL

X0, X1 62.5 ⎯333 ns When using an oscillation

circuit

X0, X1 41.67 ⎯333 ns When using an extern al

clock

tCYLL X0A, X1A 10 30.5 — µs

Input clock pulse width PWH, PWL X0 10 ⎯⎯ns Du ty ra tio is abo ut 30 % to

70%.

PWHL, PWLL X0A 5 15.2 ⎯µs

Input clock rise and fall time tCR, tCF X0 ⎯⎯ 5 ns When using external clock

Internal oper at ing cl oc k

frequency (machine clock) fCP ⎯1.5 ⎯24 MHz When using main clock

fCPL ⎯⎯8.192 50 kHz When using sub clock

Internal oper at ing cl oc k

cycle time (machine clock) tCP ⎯41.67 ⎯666 ns When using main clock

tCPL ⎯20 122.1 ⎯µs When using sub clock

MB90340E Series

DS07-13747-3E 57

tCYL

tCF tCR

0.8 VCC

0.2 VCC

PWH PWL

X0A

tCYLL

tCF tCR

0.8 VCC

0.2 VCC

PWHL PWLL

Clock Timing

MB90340E Series

58 DS07-13747-3E

Guaranteed PLL operation range

Guaranteed operation range of MB90340E series

* : When using a crystal oscillator or ceramic oscillator, the maximum oscillation clock frequency is 16 MHz

5.5

3.5

1.5 4

Power supply voltage

VCC (V)

Guaranteed operation range

Guaranteed PLL operation range

4.0

Guaranteed A/D Converter

operation range

Machine clock fCP (MHz)

4.0

3412 24

Internal clock

fCP (MHz)

External clock fC (MHz) *

x 4 x 3 x 2 x 1

x 1/2

(PLL off)

Guaranteed oscillation frequency range

1.5

x 6

MB90340E Series

DS07-13747-3E 59

(2) Reset Standby Input (TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = AVSS = 0.0 V)

* : The oscillation time of the oscillator is the time it takes for the amplitude of the oscillations to reach 90%. For

crystal oscillators, this time is between several ms and several tens of ms, for ceramic oscillators the time is

between several hundred µs and several ms , and for an ext ernal clock, the time is 0 ms.

Parameter Symbol Pin Value Unit Remarks

Min Max

Reset input

time tRSTL RST

500 ⎯ns Under normal operation

Oscillation time of oscillator*

+ 100 µs⎯µsIn Stop mode, Sub Clock

mode, Sub Sleep mode

and Watch mode

100 ⎯µs In Time Timer mode

tRSTL

0.2 VCC 0.2 VCC

100 µs

RST

90% of

amplitude

Instruction execution

Oscillation stabilization

waiting time

Oscillation time

of oscillator

Internal operation

clock

Internal reset

0.2 VCC

RST

tRSTL

0.2 VCC

• Under normal operation:

• In Stop mode, Sub Clock mode, Sub Sleep mode, Watch mode:

MB90340E Series

60 DS07-13747-3E

(3) Power On Reset (TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = AVSS = 0.0 V)

(4) Clock Output Timing (TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, VSS = 0.0 V, fCP ≤ 24 MHz)

Parameter Symbol Pin Condition Value Unit Remarks

Min Max

Power on rise time tRVCC ⎯0.05 30 ms

Power off time tOFF VCC 1⎯ms Waiting time until power-on

Parameter Symbol Pin Condition Value Unit Remarks

Min Max

Cycle time tCYC CLK ⎯62.5 ⎯ns fCP = 16 MHz

41.67 ⎯ns fCP = 24 MHz

CLK ↑ → CLK ↓tCHCL CLK ⎯20 ⎯ns fCP = 16 MHz

13 ⎯ns fCP = 24 MHz

VCC

VSS

3 V

tOFF

2.7 V

0.2 V 0.2 V0.2 V

Holds RAM data

If you change the power supply voltage too rapidly, a power on reset may occur.

We recommend that you startup smoothly by restraining voltages when changing

the power supply voltage during operation, as shown in the figure below. Perform

while not using the PLL clock. However, if voltage drops are within 1 V/s, you can

operate while using the PLL clock.

We recommend a rise of

50 mV/ms maximum.

CLK 2.4 V

CYC

2.4 V

0.8 V

CHCL

MB90340E Series

DS07-13747-3E 61

(5) Bus Timing (Read) (TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, VSS = 0.0 V, fCP ≤ 24 MHz)

Parameter Symbol Pin Condition Value Unit

Min Max

ALE pulse width tLHLL ALE

⎯

tCP/2 − 10 ⎯ns

Valid address →

ALE ↓ time tAVLL ALE, A23 to A16,

AD15 to AD00 tCP/2 − 20 ⎯ns

ALE ↓ →

Address valid time tLLAX ALE, AD15 to AD00 tCP/2 − 15 ⎯ns

Valid address →

RD ↓ time tAVRL A23 to A16,

AD15 to AD00, RD tCP − 15 ⎯ns

Valid address →

Valid data input tAVDV A23 to A16,

AD15 to AD00 ⎯5 tCP/2 − 60 ns

RD pulse width tRLRH RD 3 tCP/2 − 20 ⎯ns

RD ↓ → Valid data input tRLDV RD, AD15 to AD00 ⎯3 tCP/2 − 50 ns

RD ↑ → Data hold time tRHDX RD, AD15 to AD00 0 ⎯ns

RD ↑ → ALE ↑ time tRHLH RD, ALE tCP/2 − 15 ⎯ns

RD ↑ → Address valid time tRHAX RD, A23 to A16 tCP/2 − 10 ⎯ns

Valid address →

CLK ↑ time tAVCH A23 to A16,

AD15 to AD00, CLK tCP/2 − 16 ⎯ns

RD ↓ → CLK ↑ time tRLCH RD, CLK tCP/2 − 15 ⎯ns

ALE ↓ → RD ↓ time tLLRL ALE, RD tCP/2 − 15 ⎯ns

A23 to A16 0.8 V 2.4 V

2.4 V

0.8 V

tRHAX

AD15 to AD00 0.8 V

2.4 V 2.4 V

0.8 V Address VIL

VIH VIH

VIL Read data

tRHDX

tRLDV

tAVDV

CLK

tAVCH

2.4 V

tRLCH

2.4 V

ALE 2.4 V

tLHLL

2.4 V

tRHLH

0.8 V

tLLAX

2.4 V

tAVLL

tLLRL

tRLRH

0.8 V 2.4 V

tAVRL

MB90340E Series

62 DS07-13747-3E

(6) Bus Timing (Write) (TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, VSS = 0.0 V, fCP ≤ 24 MHz)

Parameter Symbol Pin Condition Value Unit

Min Max

Valid address → WR ↓ time tAVWL A23 to A16,

AD15 to AD00,

⎯

tCP−15 ⎯ns

WR pulse width tWLWH WR 3 tCP/2 − 20 ⎯ns

Valid data output → WR ↑ time tDVWH AD15 to AD00,

WR 3 tCP/2 − 20 ⎯ns

WR ↑ → Data hold time tWHDX AD15 to AD00,

WR 15 ⎯ns

WR ↑ → Address valid time tWHAX A23 to A16,

WR tCP/2 − 10 ⎯ns

WR ↑ → ALE ↑ time tWHLH WR, ALE tCP/2 − 15 ⎯ns

WR ↓ → CLK ↑ time tWLCH WR, CLK tCP/2 − 15 ⎯ns

CLK

tWLCH

2.4 V

ALE

tWHLH

2.4 V

WR (WRL, WRH)tWLWH

0.8 V 2.4 V

tAVWL

A23 to A16 0.8 V 2.4 V

2.4 V

0.8 V

tWHAX

AD15 to AD00 2.4 V

0.8 V Address 0.8 V

2.4 V

Write data

tDVWH

0.8 V

2.4 V

tWHDX

MB90340E Series

DS07-13747-3E 63

(7) Ready Input Timing (TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, VSS = 0.0 V, fCP ≤ 24 MHz)

Note : If the RDY setup time is insufficient, use the auto-ready function.

Parameter Symbol Pin Test

Condition Rated Value Unit Remarks

Min Max

RDY setup time tRYHS RDY ⎯

45 ⎯ns fCP = 16 MHz

32 ⎯ns fCP = 24 MHz

RDY hold time tRYHH RDY 0 ⎯ns

CLK 2.4 V

ALE

RD/WR

RDY

When WAIT is not used.

VIH VIH

tRYHH

RDY

When WAIT is used.

tRYHS

VIL

MB90340E Series

64 DS07-13747-3E

(8) Hold Timing (TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, VSS = 0.0 V, fCP ≤ 24 MHz)

Note : There is more than 1 cycle from when HRQ reads in until the HAK is changed.

Parameter Symbol Pin Condition Value Unit

Min Max

Pin floating → HAK ↓ time tXHAL HAK ⎯30 tCP ns

HAK ↑ time → Pin valid time t HAHV HAK tCP 2 tCP ns

HAK

Each pin Hi-Z

tHAHV

tXHAL

2.4 V

0.8 V

2.4 V 2.4 V

0.8 V 0.8 V

MB90340E Series

DS07-13747-3E 65

(9) LIN-UART0/1/2/3

• Bit setting: ESCR:SCES = 0, ECCR:SCDE = 0

(TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = 0 V)

Notes : • AC characteristic in CLK synchronized mode.

• CL is load capacity value of pins when testing.

• tCP is internal operating cloc k cycle time (machine clock) . Refer to “ (1) Clock Timing”.

Parameter Symbol Pin Condition Value Unit

Min Max

Serial clock cycle time tSCYC SCK0 to SCK3

Internal shift clock

mode output pi ns are

CL = 80 pF + 1 TTL.

5 tCP ⎯ns

SCK ↓ → SOT delay time tSLOVI SCK0 to SCK3,

SOT0 to SOT3 −50 +50 ns

Valid SIN → SCK ↑tIVSHI SCK0 to SCK3,

SIN0 to SIN3 tCP + 80 ⎯ns

SCK ↑ → Valid SIN hold time tSHIXI SCK0 to SCK3,

SIN0 to SIN3 0⎯ns

Serial clock “L” pulse width tSHSL SCK0 to SCK3

External shift cloc k

mode output pi ns are

CL = 80 pF + 1 TTL.

3 tCP - tR⎯ns

Serial clock “H” pulse width tSLSH SCK0 to SCK3 tCP + 10 ⎯ns

SCK ↓ → SOT delay time tSLOVE SCK0 to SCK3,

SOT0 to SOT3 ⎯2 tCP + 60 ns

Valid SIN → SCK ↑tIVSHE SCK0 to SCK3,

SIN0 to SIN3 30 ⎯ns

SCK ↑ → Valid SIN hold time tSHIXE SCK 0, SCK1,

SIN0 to SIN3 tCP + 30 ⎯ns

SCK fall time tFSCK0 to SCK3 ⎯10 ns

SCK rise time tRSCK0 to SCK3 ⎯10 ns

SCK0 to SCK3 2.4 V

0.8 V

SOT0 to SOT3 0.8 V

2.4 V

0.8 V

tSLOVI

SIN0 to SIN3 VIL

VIH

VIL

VIH

tSCYC

tIVSHI tSHIXI

• Internal Shift Clock Mode

MB90340E Series

66 DS07-13747-3E

• Bit setting: ESCR:SCES = 1, ECCR:SCDE = 0

(TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = 0 V)

Notes : • CL is load capacity value of pins when testing.

• tCP is internal operating cloc k cycle time (machine clock) . Refer to “ (1) Clock Timing”.

Parameter Symbol Pin Condition Value Unit

Min Max

Serial clock cycle time tSCYC SCK0 to SCK3

Internal shift clock

mode output pi ns are

CL = 80 pF + 1 TTL.

5 tCP ⎯ns

SCK ↑ → SOT delay time tSHOVI SCK0 to SCK3,

SOT0 to SOT3 −50 +50 ns

Valid SIN → SCK ↓tIVSLI SCK0 to SCK3,

SIN0 to SIN3 tCP + 80 ⎯ns

SCK ↓ → Valid SIN hold time tSLIXI SCK0 to SCK3,

SIN0 to SIN3 0⎯ns

Serial clock “H” pulse width tSHSL SCK0 to SCK3

External shift cloc k

mode output pi ns are

CL = 80 pF + 1 TTL.

3 tCP - tR⎯ns

Serial clock “L” pulse width tSLSH SCK0 to SCK3 tCP + 10 ⎯ns

SCK ↑ → SOT delay time tSHOVE SCK0 to SCK3,

SOT0 to SOT3 ⎯2 tCP + 60 ns

Valid SIN → SCK ↓tIVSLE SCK0 to SCK3,

SIN0 to SIN3 30 ⎯ns

SCK ↓ → Valid SIN hold time tSLIXE SCK0 to SCK3,

SIN0 to SIN3 tCP + 30 ⎯ns

SCK fall time tFSCK0 to SCK3 ⎯10 ns

SCK rise time tRSCK0 to SCK3 ⎯10 ns

• External Shift Clock Mode

SCK0 to SCK3 VIH

VIL

SOT0 to SOT3 0.8 V

2.4 V

tSLOVE

SIN0 to SIN3 VIL

VIH

VIL

VIH

VIL

tSHSL

tSLSH

tIVSHE tSHIXE

MB90340E Series

DS07-13747-3E 67

• Internal Shift Clock Mode

SCK0 to SCK3

2.4 V

SCYC

0.8 V

SOT0 to SOT3

0.8 V

2.4 V

SHOVI

SIN0 to SIN3

IVSLI

SLIXI

• External Shift Clock Mode

SCK0 to SCK3

SOT0 to SOT3

0.8 V

2.4 V

SHOVE

SIN0 to SIN3

IVSLE

SLIXE

SHSL

SLSH

MB90340E Series

68 DS07-13747-3E

• Bit setting: ESCR:SCES = 0, ECCR:SCDE = 1

(TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = 0 V)

Notes : • CL is load capacity value of pins when testing.

• tCP is internal operating cloc k cycle time (machine clock) . Refer to “ (1) Clock Timing”.

Parameter Symbol Pin Condition Value Unit

Min Max

Serial clock cycle time tSCYC SCK0 to SCK3

Internal clock operation

output pins are

CL = 80 pF + 1 TTL.

5 tCP ⎯ns

SCK ↑ → SOT delay time tSHOVI SCK0 to SCK3,

SOT0 to SOT3 −50 +50 ns

Valid SIN → SCK ↓tIVSLI SCK0 to SCK3,

SIN0 to SIN3 tCP + 80 ⎯ns

SCK ↓ → Valid SIN hold time tSLIXI SCK0 to SCK3,

SIN0 to SIN3 0⎯ns

SOT → SCK ↓ delay time tSOVLI SC K0 to SCK3,

SOT0 to SOT3 3 tCP − 70 ⎯ns

SCK0 to SCK3 2.4 V

SCYC

0.8 V

SOT0 to SOT3 0.8 V

2.4 V

SOVLI

SIN0 to SIN3 V

IVSLI

SLIXI

0.8 V

SHOVI

0.8 V

2.4 V

MB90340E Series

DS07-13747-3E 69

• Bit setting: ESCR:SCES = 1, ECCR:SCDE = 1

(TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = 0 V)

Notes : • CL is load capacity value of pins when testing.

• tCP is internal operating cloc k cycle time (machine clock) . Refer to “ (1) Clock Timing”.

Parameter Symbol Pin Condition Value Unit

Min Max

Serial clock cycle time tSCYC SCK0 to SCK3

Internal clock operation

output pins ar e

CL = 80 pF + 1 TTL.

5 tCP ⎯ns

SCK ↓ → SOT delay time tSLOVI SCK0 to SCK3,

SOT0 to SOT3 −50 +50 ns

Valid SIN → SCK ↑tIVSHI SCK0 to SCK3,

SIN0 to SIN3 tCP + 80 ⎯ns

SCK ↑ → Valid SIN hold time tSHIXI SCK0 to SCK3,

SIN0 to SIN3 0⎯ns

SOT → SCK ↑ delay time tSOVHI SCK0 to SCK3,

SOT0 to SOT3 3 tCP − 70 ⎯ns

SCK0 to SCK32.4 V

SCYC

2.4 V

SOT0 to SOT30.8 V

2.4 V

SOVHI

SIN0 to SIN3V

IVSHI

SHIXI

0.8 V

SLOVI

0.8 V

2.4 V

MB90340E Series

70 DS07-13747-3E

(10) Trigger Input Timing (TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = 0.0 V)

Parameter Symbol Pin Condition Value Unit

Min Max

Input pulse width tTRGH

tTRGL

INT0 to INT15,

INT0R to INT15R,

ADTG ⎯5 tCP ⎯ns

VIL

VIH

tTRGH

VIL

VIH

tTRGL

INT0 to INT15,

INT0R to INT15R,

ADTG

MB90340E Series

DS07-13747-3E 71

(11) Timer Related Resource Input Timing

(TA = −40 °C to +105 °C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = 0 V)

(12) Timer Related Resource Output Timing

(TA = –40°C to +105°C, VCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = 0.0 V)

Parameter Symbol Pin Condition Value Unit

Min Max

Input pulse width tTIWH TIN0 to TIN3,

IN0 to IN7 ⎯4 tCP ⎯ns

tTIWL

Parameter Symbol Pin Condition Value Unit

Min Max

CLK ↑ → TOUT change time tTO TOT0 to TOT3,

PPG0 to PPGF ⎯30 ⎯ns

VIL

VIH

tTIWH

VIL

VIH

tTIWL

TIN0 to TIN3,

IN0 to IN7

CLK 2.4 V

0.8 V

2.4 V

tTO

TOT0 to TOT3,

PPG0 to PPGF

MB90340E Series

72 DS07-13747-3E

(13) I2C Timing (TA = –40°C to +105°C, VCC = 5.0 V ± 10%, VSS = 0.0 V)

*1: For use at over 100 kHz, set the machine clock to at least 6 MHz.

*2: R,C: Pull-up resistor and load capacitor of the SCL and SDA lines.

*3: The maxim um tHDDAT meets the requirement that it does not extend the “L” width (tLOW) of the SCL signal.

*4: A Fast-mode I2C-bus device can be used in a Standard-mode I2C-bus system, but the requirement

tSUDAT ≥ 250 ns must then be met.

Parameter Symbol Condition Standard-mode Fast-mode*1Unit

Min Max Min Max

SCL clock frequency fSCL

R = 1.7 kΩ,

C = 50 pF*2

01000400kHz

Hold time (repeated) START condition

SDA↓ → SCL ↓tHDSTA 4.0 ⎯0.6 ⎯µs

“L” width of the SCL clock tLOW 4.7 ⎯1.3 ⎯µs

“H” width of the SCL clock tHIGH 4.0 ⎯0.6 ⎯µs

Set-up time (repeated) START condition

SCL ↑ → SDA ↓tSUSTA 4.7 ⎯0.6 ⎯µs

Data hold time

SCL ↓ → SDA ↓ ↑tHDDAT 0 3.45*300.9*

4µs

Data set-up time

SDA ↓ ↑ → SCL ↑tSUDAT 250 ⎯100 ⎯ns

Set-up time for STOP condition

SCL ↑ → SDA ↑tSUSTO 4.0 ⎯0.6 ⎯µs

Bus free t ime between a STOP and START

condition tBUS 4.7 ⎯1.3 ⎯µs

SDA

SCL

tLOW tSUDAT tHDSTA tBUS

tHDSTA tHDDAT tHIGH tSUSTA tSUSTO

MB90340E Series

DS07-13747-3E 73

5. A/D Converter

(TA = −40 °C to +105 °C, 3.0 V ≤ AVRH − AVRL, VCC = AVCC = 5.0 V ± 10%, fCP ≤ 24 MHz, VSS = AVSS = 0 V)

*: If the A/D con v ertor is not opera ting, a curren t when CPU is st opped is applicab le (VCC = AVCC = AVRH = 5.0 V) .

Note: The accuracy gets worse as |AVRH − AVRL| becomes smaller.

Parameter Symbol Pin Value Unit Remarks

Min Typ Max

Resolution ⎯⎯ ⎯ ⎯ 10 bit

Total error ⎯⎯ ⎯ ⎯ ±3.0 LSB

Nonlinearity error ⎯⎯ ⎯ ⎯ ±2.5 LSB

Differential

nonlinearity error ⎯⎯ ⎯ ⎯ ±1.9 LSB

Zero reading

voltage VOT AN0 to AN23 AVRL

− 1.5 × LSB AVRL

+ 0.5 × LSB AVRL

+ 2.5 × LSB V

Full scale reading

voltage VFST AN0 to AN23 AVRH

− 3.5 × LSB AVRH

− 1.5 × LSB AVRH

+ 0.5 × LSB V

Compare time ⎯⎯ 1.0 ⎯16500 µs4.5 V ≤ AVCC ≤ 5.5 V

2.0 4.0 V ≤ AVCC < 4.5 V

Sampling time ⎯⎯ 0.5 ⎯∞µs4.5 V ≤ AVCC ≤ 5.5 V

1.2 4.0 V ≤ AVCC < 4.5 V

Analog port input

current IAIN AN0 to AN23 −0.3 ⎯+0.3 µA

Analog input

voltage range VAIN AN0 to AN23 AVRL ⎯AVRH V

Reference

voltage range ⎯AVRH AVRL + 2.7 ⎯AVCC V

⎯AVRL 0 ⎯AVRH − 2.7 V

Power supply

current IAAVCC ⎯3.5 7.5 mA

IAH AVCC ⎯⎯ 5µA*

Reference

voltage current IRAVRH ⎯600 900 µA

IRH AVRH ⎯⎯ 5µA*

Offset between

input channels ⎯AN0 to AN23 ⎯⎯ 4LSB

MB90340E Series

74 DS07-13747-3E

6. Definition of A/D Converter Terms

(Continued)

Resolution : Analog variation that is recognized by the A/D converter.

Non linearity

error : The deviation between the actual conversion characteristics and a line that joins the

zero -transition line ( “00 0000 0000” ← → “00 0000 0001” ) to the full-scale transition line

( “11 1111 1110” ← → “11 1111 1111 ” ) .

Differential

linearity error : Deviation of input voltage, which is requir ed for changing outp ut code by 1 LSB, from an

ideal value.

Total error : Difference between the actu al value and the ideal value. The total error includes zero

transiti on error, full-scale transition error, and linear error.

3FFH

3FEH

3FDH

004H

003H

002H

001H

AVRL AVRH

VNT

1.5 LSB

0.5 LSB

{1 LSB × (N − 1) + 0.5 LSB}

Actual conversion

characteristics

(Actually-measured value)

Actual conversion

characteristics

Ideal characteristics

Digital output

Analog input

Total error

Total error of digital output “N” = VNT − {1 LSB × (N − 1) + 0.5 LSB}

1 LSB [LSB]

1 LSB (Ideal value) = AVRH − AVRL

1024 [V]

VOT (Ideal value) = AVRL + 0. 5 LSB [V]

VFST (Ideal value) = AVRH − 1.5 LSB [V]

VNT : A voltage at which the digital output transitions from (N − 1)H to NH.

N : Value of the digital output from the A/D converter

MB90340E Series

DS07-13747-3E 75

(Continued)

3FFH

3FEH

3FDH

004H

003H

002H

001H

AVRL AVRH AVRL AVRH

(N + 1)H

(N − 1)H

(N − 2)H

VOT (actual measurement value)

{1 LSB × (N − 1)

+ VOT }

Actual conversion

characteristics

VFST (actual

measurement

value)

VNT (actual

measurement value)

Actual conversion

characteristics

Ideal characteristics

Actual conversion

characteristics

Actual conversion

characteristics

Ideal

characteristics

Digital output

Analog inputAnalog input

VNT

(actual measurement value)

V (N + 1) T

(actual measurement

value)

Non linearity erro r Differential linearity error

Non linearity error of digital output N =VNT − {1 LSB × (N − 1) + VOT}

1 LSB [LSB]

Differential linearity error of digital output N =V (N+1) T − VNT

1 LSB −1 LSB [LSB]

VFST − VOT

1022 [V]

1 LSB =

N : Value of the digit al output from the A/D converter

VOT : Voltage at which digital output transits from “000H” to “001H.”

VFST : Voltage at which digital output transits from “3FEH” to “3FFH.”

MB90340E Series

76 DS07-13747-3E

7. Notes on A/D Converter Section

Use the device with external circuits of the following output impedance for analog inputs :

Recommended output impedance of external circuits are : Approx. 1.5 kΩ or lower (4.0 V ≤ AVCC ≤ 5.5 V,

sampling period = 0.5 µs)

If an exter nal capacitor is used, in consideration of the capacitive voltage dividing effect between the external

capacitor and the internal on-chip capacitor, it is recommended that the capacitance of the external capacitor

be several thousand times greater than the capacitance of t he internal capacitor.

If the output impedance of the external circuit is too high, a sampling period for an analog voltage may be

insufficient.

Comparator

Analog input R

4.5 V ≤ AVCC ≤ 5.5 V : R := 2.52 kΩ, C := 10 .7 pF

4.0 V ≤ AVCC < 4.5 V : R := 13.6 kΩ, C := 10.7 pF

• Analog input circuit model

Note : Use the values in the figure only as a guideline.

MB90340E Series

DS07-13747-3E 77

8. Flash Memory Program/Erase Characteristics

* : This value was conv erted from the results of evaluating the reliability of the technology (using Arrhenius equation

to translate high temperature measurements into normalized value at +85 °C) .

Parameter Conditions Value Unit Remarks

Min Typ Max

Sector erase tim e

TA = +25 °C

VCC = 5.0 V

⎯115s

Excludes programming

prior to erasure

Chip erase time ⎯9⎯sExcludes programming

prior to erasure

Word (16-bit width)

programming time ⎯16 3600 µsExcept for th e over head

time of the system

Program/Erase cycle ⎯10000 ⎯⎯cycle

Flash Data Retention

Time Average

TA = +85 °C20 ⎯⎯year *

MB90340E Series

78 DS07-13747-3E

■EXAMPLE CHARACTERISTICS

• MB90F346E, MB90F346ES, MB90F346CE, MB90F346 CES

ICC − VCC ICCL − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICCS − VCC ICCLS − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTS − VCC ICCT − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTSPLL6 − VCC ICCH − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, stopped

(mA)

(V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

CCL

( A)

100

(V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

CCS

(mA)

(V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

CCLS

( A)

(V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICTS ( A)

400

150

100

VCC (V)

200

300

2.5 3.5 4.5 5.5 6.5

f = 2 MHz

350

250

CCT

( A)

(V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICTSPLL6 (mA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

ICCH ( A)

VCC (V)

2.5 3.5 4.5 5.5 6.5

MB90340E Series

DS07-13747-3E 79

• MB90F347E, MB90F347ES, MB90F347CE, MB90F347CES

ICC − VCC ICCL − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICCS − VCC ICCLS − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTS − VCC ICCT − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTSPLL6 − VCC ICCH − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, stopped

(mA)

(V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

CCL

( A)

100

(V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

CCS

(mA)

(V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

CCLS

( A)

(V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICTS ( A)

400

150

100

VCC (V)

200

300

2.5 3.5 4.5 5.5 6.5

f = 2 MHz

350

250

CCT

( A)

(V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICTSPLL6 (mA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

ICCH ( A)

VCC (V)

2.5 3.5 4.5 5.5 6.5

MB90340E Series

80 DS07-13747-3E

• MB90F349E, MB90F349ES, MB90F349CE, MB90F349 CES

ICC − VCC ICCL − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICCS − VCC ICCLS − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTS − VCC ICCT − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTSPLL6 − VCC ICCH − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, stopped

ICC (mA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

ICCL (µA)

100

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICCS (mA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

ICCLS (µA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICTS (µA)

400

150

100

VCC (V)

200

300

2.5 3.5 4.5 5.5 6.5

f = 2 MHz

350

250

ICCT (µA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICTSPLL6 (mA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

ICCH (µA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

MB90340E Series

DS07-13747-3E 81

• MB90F342E, MB90F342ES, MB90F342CE, MB90F342 CES

ICC − VCC ICCL − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICCS − VCC ICCLS − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTS − VCC ICCT − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTSPLL6 − VCC ICCH − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, stopped

ICC (mA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

ICCL (µA)

100

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICCS (mA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

ICCLS (µA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICTS (µA)

400

150

100

VCC (V)

200

300

2.5 3.5 4.5 5.5 6.5

f = 2 MHz

350

250

ICCT (µA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICTSPLL6 (mA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

ICCH (µA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

MB90340E Series

82 DS07-13747-3E

• MB90F345E, MB90F345ES, MB90F345CE, MB90F345 CES

ICC − VCC ICCL − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICCS − VCC ICCLS − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTS − VCC ICCT − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTSPLL6 − VCC ICCH − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, stopped

ICC (mA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

ICCL ( A)

100

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

CCS

(mA)

(V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

ICCLS ( A)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

CTS

( A)

400

150

100

(V)

200

300

2.5 3.5 4.5 5.5 6.5

f = 2 MHz

350

250

CCT

( A)

(V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICTSPLL6 (mA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

ICCH ( A)

VCC (V)

2.5 3.5 4.5 5.5 6.5

MB90340E Series

DS07-13747-3E 83

• MB90346E, MB90346ES, MB90346CE, MB90346CES

ICC − VCC ICCL − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICCS − VCC ICCLS − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTS − VCC ICCT − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTSPLL6 − VCC ICCH − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, stopped

(mA)

(V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

ICCL (µA)

100

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

CCS

(mA)

(V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

ICCLS (µA)

VCC

(

)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICTS (µA)

400

150

100

VCC (V)

200

300

2.5 3.5 4.5 5.5 6.5

f = 2 MHz

350

250

ICCT (µA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

CTSPLL6

(mA)

(V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

ICCH (µA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

MB90340E Series

84 DS07-13747-3E

• MB90347E, MB90347ES, MB90347CE, MB90347CES

ICC − VCC ICCL − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICCS − VCC ICCLS − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTS − VCC ICCT − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, external clock operation

f = Internal operation frequency

ICTSPLL6 − VCC ICCH − VCC

TA = +25 °C, external clock operation

f = Internal operation frequency TA = +25 °C, stopped

(mA)

(V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

ICCL (µA)

100

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

CCS

(mA)

(V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

f = 20 MHz

f = 16 MHz

f = 12 MHz

f = 10 MHz

f = 8 MHz

f = 4 MHz

f = 2 MHz

ICCLS (µA)

VCC

(

)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

ICTS (µA)

400

150

100

VCC (V)

200

300

2.5 3.5 4.5 5.5 6.5

f = 2 MHz

350

250

ICCT (µA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

f = 8 kHz

CTSPLL6

(mA)

(V)

2.5 3.5 4.5 5.5 6.5

f = 24 MHz

ICCH (µA)

VCC (V)

2.5 3.5 4.5 5.5 6.5

MB90340E Series

DS07-13747-3E 85

• I/O characteristics

(VCC−VOH) − IOH VOL − IOL

TA = +25 °C, VCC = 4.5 V TA = +25 °C, VCC = 4.5 V

Automotive VIN − VCC CMOS VIN − VCC

TA = +25 °COther than UART-SIN pin and I2C pin

TA = +25 °C

TTL VIN − VCC CMOS VIN − VCC

TA = +25 °CUART-SIN pin, I2C pin

TA = +25 °C

(mV)

800

300

100

200

(mA)

400

500

600

024 7 10

700

13 6589

(mV)

1000

300

100

200

(mA)

400

500

600

900

700

800

024 7 1013 6589

VIN (V)

5.0

1.5

0.5

1.0

VCC (V)

0.0

2.0

3.0

3.5

2.5

2.5 3.5 4.5 5.5 6.53.0 4.0 5.0 6.0 7.0

4.0

4.5 VIHA

VILA

VIN (V)

5.0

2.5

1.5

2.0

VCC (V)

0.0

3.0

4.0

2.5 3.5 4.5 5.5 6.5

4.5

3.5

1.0

0.5

VIHS

VILS

3.0 4.0 5.0 6.0 7.0

(V)

2.5

0.8

0.3

0.5

(V)

0.0

1.0

2.0

2.5 3.5 4.5 5.5 6.5

2.3

1.5

1.3

1.8

3.0 4.0 5.0 6.0 7.0

IHT

ILT

(V)

5.0

2.5

0.5

1.0

(V)

0.0

3.0

4.0

4.5

3.5

1.5

2.0

2.5 3.5 4.5 5.5 6.53.0 4.0 5.0 6.0 7.0

IHS

ILS

MB90340E Series

86 DS07-13747-3E

■ORDERING IN FORMATION

(Continued)

Part number Package Remarks

MB90F342EPF

100-pin plastic QFP

(FPT-100P-M06)

MB90F342ESPF

MB90F342CEPF

MB90F342CESPF

MB90F342EPMC

100-pin plastic LQFP

(FPT-100P-M20)

MB90F342ESPMC

MB90F342CEPMC

MB90F342CESPMC

MB90F343EPF

100-pin plastic QFP

(FPT-100P-M06)

MB90F343ESPF

MB90F343CEPF

MB90F343CESPF

MB90F343EPMC

100-pin plastic LQFP

(FPT-100P-M20)

MB90F343ESPMC

MB90F343CEPMC

MB90F343CESPMC

MB90F345EPF

100-pin plastic QFP

(FPT-100P-M06)

MB90F345ESPF

MB90F345CEPF

MB90F345CESPF

MB90F345EPMC

100-pin plastic LQFP

(FPT-100P-M20)

MB90F345ESPMC

MB90F345CEPMC

MB90F345CESPMC

MB90F346EPF

100-pin plastic QFP

(FPT-100P-M06)

MB90F346ESPF

MB90F346CEPF

MB90F346CESPF

MB90F346EPMC

100-pin plastic LQFP

(FPT-100P-M20)

MB90F346ESPMC

MB90F346CEPMC

MB90F346CESPMC

MB90340E Series

DS07-13747-3E 87

(Continued)

Part number Package Remarks

MB90F347EPF

100-pin plastic QFP

(FPT-100P-M06)

MB90F347ESPF

MB90F347CEPF

MB90F347CESPF

MB90F347EPMC

100-pin plastic LQFP

(FPT-100P-M20)

MB90F347ESPMC

MB90F347CEPMC

MB90F347CESPMC

MB90F349EPF

100-pin plastic QFP

(FPT-100P-M06)

MB90F349ESPF

MB90F349CEPF

MB90F349CESPF

MB90F349EPMC

100-pin plastic LQFP

(FPT-100P-M20)

MB90F349ESPMC

MB90F349CEPMC

MB90F349CESPMC

MB90341EPF

100-pin plastic QFP

(FPT-100P-M06)

MB90341ESPF

MB90341CEPF

MB90341CESPF

MB90341EPMC

100-pin plastic LQFP

(FPT-100P-M20)

MB90341ESPMC

MB90341CEPMC

MB90341CESPMC

MB90342EPF

100-pin plastic QFP

(FPT-100P-M06)

MB90342ESPF

MB90342CEPF

MB90342CESPF

MB90342EPMC

100-pin plastic LQFP

(FPT-100P-M20)

MB90342ESPMC

MB90342CEPMC

MB90342CESPMC

MB90340E Series

88 DS07-13747-3E

(Continued)

Part number Package Remarks

MB90346EPF

100-pin plastic QFP

(FPT-100P-M0 6)

MB90346ESPF

MB90346CEPF

MB90346CESPF

MB90346EPMC

100-pin plastic LQFP

(FPT-100P-M2 0)

MB90346ESPMC

MB90346CEPMC

MB90346CESPMC

MB90347EPF

100-pin plastic QFP

(FPT-100P-M0 6)

MB90347ESPF

MB90347CEPF

MB90347CESPF

MB90347EPMC

100-pin plastic LQFP

(FPT-100P-M2 0)

MB90347ESPMC

MB90347CEPMC

MB90347CESPMC

MB90348EPF

100-pin plastic QFP

(FPT-100P-M06)

MB90348ESPF

MB90348CEPF

MB90348CESPF

MB90348EPMC

100-pin plastic LQFP

(FPT-100P-M20)

MB90348ESPMC

MB90348CEPMC

MB90348CESPMC

MB90349EPF

100-pin plastic QFP

(FPT-100P-M06)

MB90349ESPF

MB90349CEPF

MB90349CESPF

MB90349EPMC

100-pin plastic LQFP

(FPT-100P-M20)

MB90349ESPMC

MB90349CEPMC

MB90349CESPMC

MB90V340E-101CR 299-pin ceramic PGA

(PGA-299C-A01) For evaluation

MB90V340E-102CR

MB90340E Series

DS07-13747-3E 89

■PACKAGE DIMENSIONS

Please confirm the latest Package dimension by following URL.

http://edevice.fujitsu.com/package/en-search/ (Continued)

100-pin plastic LQFP Lead pitch 0.50 mm

Package width ×

package length 14.0 mm × 14.0 mm

Lead shape Gullwing

Sealing method Plastic mold

Mounting height

1.70 mm Max

Weight 0.65 g

Code

(Reference) P-LFQFP100-14×14-0.50

100-pin plastic LQFP

(FPT-100P-M20)

2005 -2008 FUJITSU MICROELECTRONICS LIMITED F100031S-c-3-3

14.00±0.10(.551±.004)SQ

16.00±0.20(.630±.008)SQ

125

76 50

100

0.50(.020) 0.20±0.05

(.008±.002)

0.08(.003)0.145±0.055

(.0057±.0022)

0.08(.003)

"A"

INDEX .059

–.004

+.008

–0.10

+0.20

1.50

(Mounting height)

0°~8°

0.50±0.20

(.020±.008)

(.024±.006)

0.60±0.15

0.25(.010)

0.10±0.10

(.004±.004)

Details of "A" part

(Stand off)

Dimensions in mm (inches).

Note: The values in parentheses are reference values

Note 1) * : These dimensions do not include resin protrusion.

Note 2) Pins width and pins thickness include plating thickness.

Note 3)Pins width do not include tie bar cutting remainder.

MB90340E Series

90 DS07-13747-3E

(Continued)

Please confirm the latest Package dimension by following URL.

http://edevice.fujitsu.com/package/en-search/

100-pin plastic QFP L ead pitch 0.65 mm

Package width ×

package length 14.00 × 20.00 mm

Lead shape Gullwing

Sealing method Plastic mold

Mounting height

3.35 mm MAX

Code

(Reference) P-QFP100-14×20-0.65

100-pin plastic QFP

(FPT-100P-M06)

(

FPT-100P-M06

)

2002 FUJITSU LIMITED F100008S-c-5-5

130

5180

100

20.00±0.20(.787±.008)

23.90±0.40(.941±.016)

14.00±0.20

(.551±.008)

17.90±0.40

(.705±.016)

INDEX

0.65(.026) 0.32±0.05

(.013±.002) M

0.13(.005)

"A"

0.17±0.06

(.007±.002)

0.10(.004)

Details of "A" part

(.035±.006)

0.88±0.15

(.031±.008)

0.80±0.20

0.25(.010)

3.00 +0.35

–0.20

+.014

–.008

.118

(Mounting height)

0.25±0.20

(.010±.008)

(Stand off)

0~8˚

Dimensions in mm (inches).

Note: The values in parentheses are reference values.

Note 1) * : These dimensions do not include resin protrusion.

Note 2) Pins width and pins thickness include plating thickness.

Note 3)Pins width do not include tie bar cutting remainder.

MB90340E Series

DS07-13747-3E 91

■MAIN CHANGES IN THIS EDITION

The vertical lines marked in the left side of the page show the changes.

Page Section Change Results

⎯⎯

Changed the package

FPT-100P-M05 → FPT-100P-M20

⎯⎯

Changed as follows;

UART → LIN-UART

16-bit I/O timer → 16-bit free-run timer

11, 12 ■ PIN ASSIGNMENTS Added a Pin Assignment for using MB90V340E-101/102

26 ■ HANDLING DEVICES Added a description of the “17. Serial communication”.

27 ■ BLOCK DIAGRAMS Added a Block Diagram of MB90V340E-101/102.

■ ELECTRICAL

CHARACTERISTICS

1. Absolute Maximum

Ratings

Changed the Max value of the power consumption.

340 → 450

65 to 69 4. AC Characteristics Changed the description of “(9) UART”.

73 5. A/D Converter Changed the description of “Zero reading voltage” and “Full scale reading

voltage”.

86 to 88 ■ ORDERING

INFORMATION

Changed the part number ;

MB90342EPFV → MB90342EPMC

MB90F345ESPFV → MB90F 345ESPMC etc.

89 ■ PACKAGE

DIMENSIONS Changed the package

FPT-100P-M05 → FPT-100P-M20

MB90340E Series

FUJITSU MICROELECTRONICS LIMITED

Shinjuku Dai-Ichi Seimei Bldg. 7-1, Nishishinjuku 2-chome, Shinjuku-ku,

Tokyo 163-0722, Japan Tel: +81-3-5322-3347 Fax: +81-3-5322-3387

http://jp.fujitsu.com/fml/en/

For further information please contact:

North and South America

FUJITSU MICROELECTRONICS AMERICA, INC.

1250 E. Arques Avenue, M/S 333

Sunnyvale, CA 94085-5401, U.S.A.

Tel: +1-408-737-5600 Fax: +1-408-737-5999

http://www.fma.fujitsu.com/

Europe

FUJITSU MICROELECTRONICS EUROPE GmbH

Pittlerstrasse 47, 63225 Langen,

Germany

Tel: +49-6103-690-0 Fax: +49-6103-690-122

http://emea.fujitsu.com/microelectronics/

Korea

FUJITSU MICROELECTR ONICS K OREA LTD .

206 KOSMO TOWER, 1002 Daechi-Dong,

Kangnam-Gu,Seoul 135-280

Korea

Tel: +82-2-3484-7100 Fax: +82-2-3484-7111

http://www.fmk.fujitsu.com/

Asia Pacific

FUJITSU MICROELECTR ONICS ASIA PTE LTD .

151 Lorong Chuan, #05-08 New Tech Park,

Singapore 556741

Tel: +65-6281-0770 Fax: +65-6281-0220

http://www.fujitsu.com/sg/services/micro/semiconductor/

FUJITSU MICROELECTR ONICS SHANGHAI CO ., LTD.

Rm.3102, Bund Center, No.222 Yan An Road(E),

Shanghai 200002, China

Tel: +86-21-6335-1560 Fax: +86-21-6335-1605

http://cn.fujitsu.com/fmc/

FUJITSU MICROELECTR ONICS PACIFIC ASIA LTD .

10/F., World Commerce Centre, 11 Canton Road

Tsimshatsui, Kowloon

Hong Kong

Tel: +852-2377-0226 Fax: +852-2376-3269

http://cn.fujitsu.com/fmc/tw

The contents of this document are subject to change without notice.

Customers are advised to consult with sales representatives before ordering.

The informatio n, such as desc riptions of function and application circuit examples, in this document a re present ed solely for the purpose

of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device; FUJITSU MICROELECTRONICS

does not warrant proper operation of the device with respect to use b ased on such information. When you develop equipment incorporat-

ing the device based on such information, you must assume any responsibility arising out of such use of the information.

FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information.

Any information in this document, including descriptions of functio n and schematic diagrams, shall not be construed as license of the use

or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS

or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual p roper ty right or

other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual

property rights or other rights of third parties which would result from the use of information contained herein.

The products described in this document are designed, developed and manufactured as contemplated for general use, including without

limitation, ordinary industrial use, general office use, personal use, and househo ld use, but are not designed, developed and manufactured

as contemplated ( 1) for use acco mpanying fatal risks or dangers that, unless extremely high saf ety is secured, could h ave a ser ious effect

to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in

nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in

weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite).

Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising

in connection with above-mentioned uses of the products.

Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by

incorporating safety design measures into your facility and equipment such as redund ancy, fire protection, and prevention of over-current

levels and other abnormal operating conditions.

Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of

the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws.

The company names and brand names herein are the trademarks or registered trademarks of their respective owners.

Edited Business & Media Promotion Dept.