INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: * The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications * The IC06 74HC/HCT/HCU/HCMOS Logic Package Information * The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT138 3-to-8 line decoder/demultiplexer; inverting Product specification File under Integrated Circuits, IC06 September 1993 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer; inverting 74HC/HCT138 The 74HC/HCT138 decoders accept three binary weighted address inputs (A0, A1, A2) and when enabled, provide 8 mutually exclusive active LOW outputs (Y0 to Y7). FEATURES * Demultiplexing capability * Multiple input enable for easy expansion * Ideal for memory chip select decoding The "138" features three enable inputs: two active LOW (E1 and E2) and one active HIGH (E3). Every output will be HIGH unless E1 and E2 are LOW and E3 is HIGH. * Active LOW mutually exclusive outputs * Output capability: standard This multiple enable function allows easy parallel expansion of the "138" to a 1-of-32 (5 lines to 32 lines) decoder with just four "138" ICs and one inverter. * ICC category: MSI The "138" can be used as an eight output demultiplexer by using one of the active LOW enable inputs as the data input and the remaining enable inputs as strobes. Unused enable inputs must be permanently tied to their appropriate active HIGH or LOW state. GENERAL DESCRIPTION The 74HC/HCT138 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The "138" is identical to the "238" but has inverting outputs. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 C; tr = tf = 6 ns TYPICAL SYMBOL PARAMETER UNIT CONDITIONS HC HCT CL = 15 pF; VCC = 5 V propagation delay tPHL/ tPLH An to Yn 12 17 ns tPHL/ tPLH E3 to Yn En to Yn 14 19 ns 3.5 3.5 pF 67 67 pF CI input capacitance CPD power dissipation capacitance per package notes 1 and 2 Notes 1. CPD is used to determine the dynamic power dissipation (PD in W): PD = CPD x VCC2 x fi + (CL x VCC2 x fo) where: fi = input frequency in MHz fo = output frequency in MHz (CL x VCC2 x fo) = sum of outputs CL = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI = GND to VCC For HCT the condition is VI = GND to VCC - 1.5 V ORDERING INFORMATION See "74HC/HCT/HCU/HCMOS Logic Package Information". September 1993 2 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer; inverting 74HC/HCT138 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1, 2, 3 A0 to A2 address inputs 4, 5 E1, E2 enable inputs (active LOW) 6 E3 enable input (active HIGH) 8 GND ground (0 V) 15, 14, 13, 12, 11, 10, 9, 7 Y0 to Y7 outputs (active LOW) 16 VCC positive supply voltage handbook, halfpage 1 A0 Y0 2 A1 Y1 14 3 A2 Y2 13 Y3 12 15 Y4 11 4 E1 Y5 10 5 E2 Y6 9 6 E3 Y7 7 MLB312 Fig.1 Pin configuration. (a) Fig.2 Logic symbol. (b) Fig.3 IEC logic symbol. September 1993 Fig.4 Functional diagram. 3 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer; inverting 74HC/HCT138 FUNCTION TABLE INPUTS OUTPUTS E1 E2 E3 A0 A1 A2 Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 H X X X H X X X L X X X X X X X X X H H H H H H H H H H H H H H H H H H H H H H H H L L L L L L L L H H H H L H L H L L H H L L L L L H H H H L H H H H L H H H H L H H H H H H H H H H H H H H H H L L L L L L L L H H H H L H L H L L H H H H H H H H H H H H H H H H H H H H H H L H H H H L H H H H L H H H H L Notes 1. H = HIGH voltage level L = LOW voltage level X = don't care Fig.5 Logic diagram. September 1993 4 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer; inverting 74HC/HCT138 DC CHARACTERISTICS FOR 74HC For the DC characteristics see "74HC/HCT/HCU/HCMOS Logic Family Specifications". Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) TEST CONDITIONS 74HC SYMBOL PARAMETER +25 min. typ. -40 to +85 max. min. max. -40 to +125 min. UNIT VCC WAVEFORMS (V) max. tPHL/ tPLH propagation delay An to Yn 41 15 12 150 30 26 190 38 33 225 45 38 ns 2.0 4.5 6.0 Fig.6 tPHL/ tPLH propagation delay E3 to Yn 47 17 14 150 30 26 190 38 33 225 45 38 ns 2.0 4.5 6.0 Fig.6 tPHL/ tPLH propagation delay En to Yn 47 17 14 150 30 26 190 38 33 225 45 38 ns 2.0 4.5 6.0 Fig.7 tTHL/ tTLH output transition time 19 7 6 75 15 13 95 19 16 110 22 19 ns 2.0 4.5 6.0 Figs 6 and 7 September 1993 5 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer; inverting 74HC/HCT138 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see "74HC/HCT/HCU/HCMOS Logic Family Specifications". Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ICC) for a unit load of 1 is given in the family specifications. To determine ICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT An 1.50 En 1.25 E3 1.00 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) TEST CONDITIONS 74HCT SYMBOL PARAMETER +25 min. typ. -40 to +85 max. min. max. -40 to +125 min. UNIT VCC WAVEFORMS (V) max. tPHL/ tPLH propagation delay An to Yn 20 35 44 53 ns 4.5 Fig.6 tPHL/ tPLH propagation delay E3 to Yn 18 40 50 60 ns 4.5 Fig.6 tPHL/ tPLH propagation delay En to Yn 19 40 50 60 ns 4.5 Fig.7 tTHL/ tTLH output transition time 7 15 19 22 ns 4.5 Figs 6 and 7 September 1993 6 Philips Semiconductors Product specification 3-to-8 line decoder/demultiplexer; inverting 74HC/HCT138 AC WAVEFORMS (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.6 Waveforms showing the address input (An) and enable input (E3) to output (Yn) propagation delays and the output transition times. (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.7 Waveforms showing the enable input (En) to output (Yn) propagation delays and the output transition times. PACKAGE OUTLINES See "74HC/HCT/HCU/HCMOS Logic Package Outlines". September 1993 7