OV9750 720p HD product brief lead free available in a lead-free package High Performance 1/3-Inch Image Sensor Brings 720p HD Video to Mainstream Surveillance Camera Applications OmniVision's new OV9750 is a high performance 1/3-inch 720p high definition (HD) sensor designed specifically for mainstream consumer and commercial security systems. The sensor utilizes OmniVision's latest OmniPixel3-HSTM with dual conversion gain frontside illumination technology to capture high definition (HD) video used for popular analog 960H CCTVs, as well as HD analog and 720 HD network cameras. The OV9750 also has high near-infrared (NIR) sensitivity for day and night camera applications. Built on 3.75-micron OmniPixel3-HSTM with dual conversion gain pixel architecture, the OV9750 achieves excellent image performance, enabling clear image and video recording in both high- and low-light environments. The OV9750 is capable of operating in SXGA (1280x960) resolution at 60 frames per second (fps) with 10-bit output, or at 45 fps with 12-bit output. Additionally, the sensor fits into a 6.3 x 5.2 mm package and supports ultra-low power mode (ULPM), which reduces resolution and frame rates to conserve additional power for very low-power camera design. Find out more at www.ovt.com. OV9750 Applications Security and Surveillance Cameras Wearables PC Multimedia 960H for Analog CCTV Applications Ordering Information Product Features OV09750-H55A (color, lead-free, 55-pin CSP) 3.75 m x 3.75 m pixel ultra low power mode (ULPM) 1280 x 960 at 60 fps @ 10-bit, 45 fps @ 12-bit support for output formats: - 10/12-bit RGB RAW programmable controls for: - frame rate - mirror and flip - cropping - windowing two-wire serial bus control (SCCB) Product Specifications MIPI/LVDS serial output interface (1- or 2-lane)/DVP interface 2x binning support supports images sizes: - SXGA (1280x960) - 720p (1280x720) - VGA (640x480), and more image quality control: - defect pixel correction - automatic black level calibration active array size: 1280 x 960 lens size: 1/3" power supply: - core: 1.7 to 1.9V (1.8V nominal) - analog: 3.15 to 3.45V (3.3V nominal) - I/O: 1.7 to 1.9V (1.8V nominal) input clock frequency: 6 ~ 74.5 MHz power requirements: - active: 166 mW - standby: 51 W - XSHUTDN: 13 W 58 bytes of embedded one-time programmable (OTP) memory for customer use temperature range: - operating: -30C to +85C junction temperature - stable image: 0C to +60C junction temperature output interface: 2-lane MIPI/LVDS serial output/DVP parallel output output formats: 10/12-bit RGB RAW lens chief ray angle: 9 linear maximum image transfer rate: - SXGA (1280x960): 60 fps - 720p (1280x720): 60 fps - VGA (640x480): 120 fps sensitivity: 39.6 Ke-/Lux-sec max S/N ratio: 43.1 dB dynamic range: 73.4 dB @ 8x gain pixel size: 3.75 m x 3.75 m image area: 4860 m x 3660 m die dimensions: 6254 m x 5194 m Functional Block Diagram OV9750 image array 12-bit ADC AMP ISP row select column sample/hold image output interface output image sensor processor FIFO image sensor core PCLK D[11:0] MCP/N MDP/N[1:0] gain control control register bank 4275 Burton Drive Santa Clara, CA 95054 USA Version 1.4, October, 2017 Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com SDA SCL SCCB slave interface SID STROBE ULPM HREF FSIN/VSYNC TM XSHUTDN timing generator and system control logic PWDNB PLL XVCLK PLLs OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision and the OmniVision logo are registered trademarks of OmniVision Technologies, Inc. OmniPixel3-HS is a trademark of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.