High Performance 1/3-Inch Image Sensor
Brings 720p HD Video to Mainstream
Surveillance Camera Applications
OV9750 720p HD product brief
lead free
available in
a lead-free
package
OmniVision's new OV9750 is a high performance
1/3-inch 720p high definition (HD) sensor designed
specifically for mainstream consumer and commercial
security systems. The sensor utilizes OmniVision's
latest OmniPixel3-HS™ with dual conversion gain
frontside illumination technology to capture high
definition (HD) video used for popular analog 960H
CCTVs, as well as HD analog and 720 HD network
cameras. The OV9750 also has high near-infrared (NIR)
sensitivity for day and night camera applications.
Built on 3.75-micron OmniPixel3-HS™ with dual
conversion gain pixel architecture, the OV9750 achieves
excellent image performance, enabling clear image and
video recording in both high- and low-light
environments. The OV9750 is capable of operating in
SXGA (1280x960) resolution at 60 frames per second
(fps) with 10-bit output, or at 45 fps with 12-bit output.
Additionally, the sensor fits into a 6.3 x 5.2 mm package
and supports ultra-low power mode (ULPM), which
reduces resolution and frame rates to conserve
additional power for very low-power camera design.
Find out more at www.ovt.com.
¬
¬
Security and Surveillance Cameras
PC Multimedia
¬
¬
Wearables
960H for Analog CCTV Applications
Applications
¬
¬
¬
¬
¬
3.75 µm x 3.75 µm pixel
1280 x 960 at 60 fps @ 10-bit,
45 fps @ 12-bit
programmable controls for:
- frame rate
- mirror and flip
- cropping
- windowing
supports images sizes:
- SXGA (1280x960)
- 720p (1280x720)
- VGA (640x480), and more
58 bytes of embedded one-time
programmable (OTP) memory
for customer use
ultra low power mode (ULPM)
support for output formats:
- 10/12-bit RGB RAW
two-wire serial bus control (SCCB)
MIPI/LVDS serial output interface
(1- or 2-lane)/DVP interface
2x binning support
image quality control:
- defect pixel correction
- automatic black level calibration
¬
¬
¬
¬
¬
¬
Product Features ¬OV09750-H55A
(color, lead-free, 55-pin CSP)
Ordering Information
¬
¬
¬
¬
¬
¬
active array size: 1280 x 960
power supply:
- core: 1.7 to 1.9V (1.8V nominal)
- analog: 3.15 to 3.45V (3.3V nominal)
- I/O: 1.7 to 1.9V (1.8V nominal)
power requirements:
- active: 166 mW
- standby: 51 µW
- XSHUTDN: 13 µW
temperature range:
- operating: -30°C to +85°C junction
temperature
- stable image: 0°C to +60°C junction
temperature
output interface: 2-lane MIPI/LVDS
serial output/DVP parallel output
output formats: 10/12-bit RGB RAW
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
lens size: 1/3"
input clock frequency: 6 ~ 74.5 MHz
lens chief ray angle: 9° linear
maximum image transfer rate:
- SXGA (1280x960): 60 fps
- 720p (1280x720): 60 fps
- VGA (640x480): 120 fps
sensitivity: 39.6 Ke-/Lux-sec
max S/N ratio: 43.1 dB
dynamic range: 73.4 dB @ 8x gain
pixel size: 3.75 µm x 3.75 µm
image area: 4860 µm x 3660 µm
die dimensions: 6254 µm x 5194 µm
Product Specifications
Version 1.4, October, 2017
OmniVision reserves the right to make changes to their products or to discontinue any product or
service without further notice. OmniVision and the OmniVision logo are registered trademarks of
OmniVision Technologies, Inc. OmniPixel3-HS is a trademark of OmniVision Technologies, Inc.
All other trademarks are the property of their respective owners.
4275 Burton Drive
Santa Clara, CA 95054
USA
Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
OV9750
Functional Block Diagram
OV9750
image sensor core image
sensor
processor
image output
interface
column
sample/hold
row select
PLLs
control register bank
SCCB slave interface
timing generator and system control logic
gain control
PLL
XVCLK
TM
PWDNB
XSHUTDN
HREF
FSIN/VSYNC
ULPM
STROBE
SCL
SID
SDA
MCP/N
MDP/N[1:0]
PCLK
D[11:0]
image
array AMP
ISP
12-bit
ADC
FIFO
output
