Circuit Protection Circuit Breakers CB4201-10 CB4202-10 Thermal Magnetic Type Double Pole Ordering Data Type: Single Pole - CB4201-10 Current Ratings (amps) Part No.* TS 35 Current Ratings (amps) Part No.* TS 35 131.00 40.00 19.30 10.40 7.10 4.30 3.58 2.50 1.67 1.22 0.61 0.55 0.38 0.24 0.19 0.16 0.09 0.09 0.061 0.07 0.041 0.04 0.034 0.02 0.02 <0.02 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1.0 1.2 1.5 1.8 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0 9.0 10.0 9104173500 9104183500 9129813500 9124093500 9101003500 9124113500 9129563500 9101103500 9101203500 9101303500 9101403500 9124143500 9101503500 9101603500 9101703500 9124163500 9104353500 9124173500 9101803500 9107833500 9103813500 9120043500 9104153500 9103003500 9104613500 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1.0 1.2 1.5 1.8 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0 9.0 9120353500 9124243500 9124263500 9124273500 9129583500 9124283500 9124293500 9129593500 9129613500 9129623500 9129633500 9124333500 9129643500 9129653500 9129663500 9124343500 9129713500 11.0 12.0 13.0 14.0 15.0 16.0 9101903500 9124183500 9107843500 9124193500 9107853500 9102003500 9124213500 10.0 11.0 12.0 13.0 14.0 15.0 16.0 9129683500 <0.02 <0.02 <0.02 <0.02 <0.02 <0.02 Circuit Breaker - Trip Curves 4200 Series M1+ M1+ 0.05 to 7.5 A 9129673500 9124373500 9124393500 9104673500 9124423500 9124443500 9124463500 9129693500 9124473500 * Ordering Options - Example Thermal Magnetic Type Typical time/current characteristics at 23C 8 to 16 A To order CB4201-10 Single Pole Circuit Breaker, Part No. 9101203501 * Current Rating of 1.0 amps * Internal Resistance per Pole of 1.67 ohms * For TS 35 * Without Trip Button 10,000 10,000 -30C +23C +55C -30C +23C +55C 1,000 100 100 Trip time in seconds 1,000 Trip time in seconds Type: Double Pole - CB4202-10 Internal Resistance per Pole (ohms) RAIL MOUNTED TERMINAL BLOCKS: W-SERIES Single Pole 10 1 "00" - Standard Circuit Breaker "01" - Without Trip Button 10 "32" - TS 32 DIN-Rail Mountable "35" - TS 35 DIN-Rail Mountable 1 0.1 0.1 0.01 0.01 Base Part No. (Determines 1 or 2 pole unit) 0.001 0.001 0.8 1 2 3 4 6 8 10 20 30 ... times rated current 50 70 100 9 1 0 1 2 0 3 5 0 1 0.8 1 2 3 4 6 8 10 20 30 50 70 100 To manually trip breaker, a plastic or wooden dowel (0.12 inch diameter) will be needed. ... times rated current 35 CB4201-10 Single Pole Internal Wiring Diagram Dimensions in mm Internal Wiring Diagram CB4202-10 Double Pole Dimensions in mm Technical Data Rated voltage & current UL CSA VDE Creepage resistance Dielectric strength Insulation resistance Interrupting capacity (VDE 0660, Part 101, P-2) Interrupting capacity; 4201-10 (UL 1077/EN 60934 PC1) Typical life at 2 x rated current Shock Torque Vibration Temperature range Corrosion Humidity Weight Wire size (UL) Nm (lb. in.) Accessories Jumpers Daisy Chain 50* Straight CQB** insulated BDC 50 CQB 2 CQB 3 CQB 4 CQB 10 CQB 2 CQB 3 CQB 4 CQB 10 AF/TS 32 Angled CQB** insulated Adapter foot (for TS 32 Rail) Marking Tags Special print only Consecutive horizontal Consecutive vertical Note: Part numbers are shown for a single card of pre-printed tags numbered 1-50. 36 Voltage Ratings Current Ratings AC 250 V, DC 80 V, 50/60 Hz 0.05...16 A AC 250 V, DC 80 V, 50/60 Hz 0.05...16 A AC 250 V, DC 65 V, 50/60 Hz 0.05...16 A PTI 600 to IEC 112 4,000 VAC; IEC 664 & 664 A > 100 M (DC 500 V) 4201-10 Maximum capacity 0.05...0.8 A Self-limiting 1...2 A 200 A 2.5...16 A 400 A Rated current Rated voltage Maximum capacity 0.05...4.5 A AC 250 V 200 A 5...8 A AC 250 V 1000 A 9...15 A AC 125 V 1000 A 0.05...15 A DC 65 V 200 A 5,000 operations 25 g (11 ms) to IEC 68-2-27, Test Ea 0.8 (7.1) 5 g (57 to 500 Hz / 0.38 mm, 10 to 57 Hz) to IEC 68-2-6, Test Fc -30C...+55C (-22F...+131F) 96 hours at 5% salt spray, to IEC 68-2-11, Test Ka 240 hours at 95% RH, to IEC 68-2-3, Test Ca Approximately 60 g per pole #20...8 AWG solid #20...10 AWG standard Type Part No. WS 8/5 MC DEK 5/5 DEK 5/5 9970290000 9970560000 9970570000 9970580000 9970590000 9970600000 9970610000 9970620000 9970630000 9102100000 1640750000*** 0473460001 0473560001 Note: Resistive and inductive loads (0.05 - 16 A) *BDC will accommodate 20 A per pin, 20 A total **CQB will accommodate 18 A per pin, 18 A total; dedicated to 4201 Series ***Please specify horizontal or vertical print when ordering. Standard quantity = 144 tags per card. Circuit Protection Circuit Breakers CB2211-10 Single Pole CB2212-10 Double Pole CB2213-10 Triple Pole Thermal Magnetic Type Type: Single Pole - CB2211-10 Type: Double Pole - CB2212-10 (M1) Current Ratings (amps) N/O Aux. Part No. N/C Aux. Part No. Current Ratings (amps) N/O Aux. Part No. N/C-N/O Part No. Current Ratings (amps) N/O Aux. Part No. N/C-N/O Part No. 92 26.1 11.6 0.1 0.2 0.3 9911010000 9911020000 9911030000 9911010005 9911020005 9911030005 0.1 0.2 0.3 9912010000 9912020000 9912030000 9912010003 9912020003 9912030003 0.1 0.2 0.3 9913010000 9913020000 9913030000 9913010003 9913020003 9913030003 6.6 4.1 3 1.65 1.1 0.47 0.28 0.183 0.124 0.077 0.063 0.045 0.02 0.02 0.4 0.5 0.6 0.8 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10 9911040000 9911050000 9911060000 9911080000 9911100000 9911150000 9911200000 9911250000 9911300000 9911400000 9911500000 9911600000 9911800000 9921100000 9911040005 9911050005 9911060005 9911080005 9911100005 9911150005 9911200005 9911250005 9911300005 9911400005 9911500005 9911600005 9911800005 9921100005 0.4 0.5 0.6 0.8 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 9912040000 9912050000 9912060000 9912080000 9912100000 9912150000 9912200000 9912250000 9912300000 9912400000 9912500000 9912600000 9912800000 9912040003 9912050003 9912060003 9912080003 9912100003 9912150003 9912200003 9912250003 9912300003 9912400003 9912500003 9912600003 9912800003 0.4 0.5 0.6 0.8 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 9913040000 9913050000 9913060000 9913080000 9913100000 9913150000 9913200000 9913250000 9913300000 9913400000 9913500000 9913600000 9913800000 9913040003 9913050003 9913060003 9913080003 9913100003 9913150003 9913200003 9913250003 9913300003 9913400003 9913500003 9913600003 9913800003 0.02 0.02 0.02 0.02 0.02 0.02 0.02 12 15 16 18 20 25 32 9921120000 9921150000 9921160000 9921180000 9921200000 9921250000 9921320000 9921120005 9921150005 9921160005 9921180005 9921200005 9921250005 9921320005 10 12 15 16 18 20 25 32 9922100000 9922120000 9922150000 9922160000 9922180000 9922200000 9922250000 9922320000 9922100003 9922120003 9922150003 9922160003 9922180003 9922200003 10 12 15 16 18 20 25 32 9923100000 9923120000 9923150000 9923160000 9923180000 9923200000 9923250000 9923320000 9923100003 9923120003 9923150003 9923160003 9923180003 9923200003 Internal Resistance per Pole (ohms) Ordering Options - Example To order CB2212-10 Double Pole Circuit Breaker with N/O Aux., Part No. 9912100003 * Current Rating of 1.0 amps * Internal Resistance per Pole of 1.1 ohms * Trip Curve - M1, Medium (Standard) * N/C-N/O Auxiliary Contacts 9 9 1 2 1 0 0 0 0 3 Auxiliary Contacts "00" - N/C Auxiliary Contact "02" - W/O Auxiliary Contact "03" - N/C-N/O Auxiliary Contacts (double and triple pole only) "05" - N/O Auxiliary Contact Trip Curves "00" - M1, Medium (standard) "11" - F1, Fast (DC only) "12" - M3, Low Resistance "13" - T1, Delayed Base Part No. (Indicates number of poles)* Auxiliary for the 2-pole will be configured: N/C for 1st pole & N/O for 2nd pole. Auxiliary for the 3-pole will be configured: N/C for 1st pole & N/O for 3rd pole. *Standard breakers will be calibrated to a M1 trip curve with N/O Auxiliary Contacts. Type: Triple Pole - CB2213-10 Standard Current Ratings and Typical Internal Resistance Values Internal Resistance (ohms) Current F1 M1 T1 M3 Rating fast standard delayed low resistance (amps) acting delay for for standard delay for for DC AC & DC AC AC & DC T2 thermal for AC & DC 0.1 162 92 81 42 77 0.2 0.3 0.4 0.5 0.6 0.8 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 25.0 32.0 39.3 17.5 9.2 6.8 4.2 2.8 1.6 0.78 0.42 0.26 0.18 0.12 0.092 0.054 0.025 0.022 0.02 0.02 - - - 26.1 11.6 6.6 4.1 3 1.6 1.10 0.47 0.28 0.183 0.124 0.077 0.063 0.045 0.02 0.02 0.02 0.02 0.02 0.02 0.02 24.2 10.4 6.0 3.9 2.7 1.53 0.98 0.42 0.24 0.17 0.12 0.073 0.055 0.039 0.02 0.02 0.02 0.02 0.02 0.02 0.02 11.7 5.6 2.9 1.75 1.42 0.75 0.5 0.22 0.136 0.083 0.057 0.041 0.032 0.021 0.02 0.02 0.02 0.02 - - - 23 10.2 5.7 3.7 2.6 1.39 0.9 0.36 0.19 0.141 0.091 0.051 0.040 0.027 0.02 0.02 0.02 0.02 0.02 0.02 0.02 37 RAIL MOUNTED TERMINAL BLOCKS: W-SERIES Ordering Data CB2210-10 Dimensions in mm Note: N/O-Auxiliary contact will be open during normal state. Aux. will close when breaker trips. Internal Wiring Diagram N/C-Auxiliary contact will be closed during normal state. Aux. will open when breaker trips. Note: For Trip Curves, please reference page 39. Technical Data Rated voltage & current Voltage Ratings 277 / 480 VAC (50/60 Hz); 65 VDC 277 / 480 VAC (50/60 Hz); 65 VDC 250 / 415 VAC / 65 VDC 277 VAC / 65 VDC, 1 A PTI 600 to IEC 112 4,000 VAC; IEC 664 & 664 A > 100 M (DC 500 V) Rated current Rated voltage 0.05 ... 0.8 A 250 / 415 VAC 6 ... 32 A 250 / 415 VAC UL CSA VDE Auxiliary contacts Creepage resistance Dielectric strength Insulation resistance Interrupting capacity (VDE 0660, Part 101, P-2) Rupture capacity (3 times) 400 A 800 A Interrupting capacity (UL 1077/EN 60934 PC1) Rated current 0.1 ... 16 A 20 ... 32 A 0.1 ... 32 A Typical life at 2 x rated current Shock Torque Vibration Temperature range Corrosion Humidity Weight Wire size (UL) 5,000 operations 25 g (11 ms) to IEC 68-2-27, Test Ea 0.6 (5.3) Auxiliary contact: 0.5 (4.4) 5 g (57 to 500 Hz / 0.38 mm, 10 to 57 Hz) to IEC 68-2-6, Test Fc -30 ... +60C (-22F ... +140F) 96 hours at 5% salt spray, to IEC 68-2-11, Test Ka 240 hours at 95% RH, to IEC 68-2-3, Test Ca Approximately 60 g per pole #20 ... 10 AWG solid Auxiliary Contact: #20 ... 16 AWG #20 ... 10 AWG standard Nm (lb. in.) Accessories Jumpers Daisy Chain 50 Marking Tags Type Special print only Consecutive horizontal 1 2 3 4 5 6 Consecutive vertical Note: Part numbers shown are for a single card of pre-printed tags numbered 1-50. For additional information, see Accessories section. DEK 5/6 DEK 5/6 DEK 5/6 Note: Resistive and inductive loads (0.05 - 16 A) *Please specify horizontal or vertical print when ordering. 38 Rated voltage 277 / 480 VAC 277 / 480 VAC 65 VDC Current Ratings 0.1 ... 32 A 0.1 ... 32 A 0.1 ... 32 A BDC 50, 20 A maximum Maximum rupture capacity (3 times) 5000 A 2000 A 2000 A Part No. 9970290000 0490360000* 0468660001 0468760001 Circuit Breaker -- Trip Curves Thermal Magnetic Type Typical time/current characteristics at 23C 2200 Series -30C +23C +55C 1,000 -30C AC +23C DC +23C +55C 1,000 -M1 10 1 0.1 0.1 0.01 0.01 DC AC 0.8 1 2 3 4 6 8 10 20 30 50 70 100 -30C +23C +55C 100 10 1 DC 2 3 4 6 8 10 20 30 50 70 100 1 0.01 0.001 0.8 1 10 0.1 AC 0.01 ... times rated current ... times rated current 0.1 to 7.5 A 1,000 0.1 0.001 0.001 -T1 10,000 100 Trip time in seconds 1 -30C AC +23C DC +23C +55C 1,000 T rip time in seconds 10 8 to 32 A 10,000 100 100 Trip time in seconds 0.1 to 7.5 A 10,000 0.001 0.8 1 2 3 4 6 8 10 20 30 ... times rated current 50 70 100 .8 1 2 3 4 6 8 10 20 30 50 70 100 ... times rated current RAIL MOUNTED TERMINAL BLOCKS: W-SERIES -M1 0.1 to 32 A Trip time in seconds F1 10,000 2200 Series -T1 8 to 32 A 10,000 -30C +23C +55C 1,000 Trip time in seconds 100 10 1 0.1 0.01 0.001 .8 1 2 3 4 6 8 10 20 30 50 70 100 ... times rated current 39 Circuit Protection Circuit Breakers CB9101-16 Single Pole CB9102-16 Double Pole CB9103-16 Triple Pole Thermal Magnetic Type Ordering Data Type: Single Pole - CB9101-16 Current Ratings (amps) 0.5 1.0 2.0 3.0 4.0 6.0 10.0 13.0 16 20 25 32 40 50 63 Internal Resistance per Pole (ohms) 6.2 1.7 0.45 0.22 0.13 0.05 <0.02 <0.02 <0.02 <0.02 <0.02 <0.02 <0.02 <0.02 <0.02 Type: Double Pole - CB9102-16 Current Ratings (amps) 0.5 1.0 2.0 3.0 4.0 6.0 10.0 13.0 16 20 25 32 40 50 63 Part No. 9925350000 9925360000 9925380000 9925390000 9925400000 9925410000 9925430000 9929820000 9925440000 9925450000 9925460000 9925470000 9925480000 9925490000 9925500000 Type: Triple Pole - CB9103-16 Part No. 9925650000 9925660000 9925680000 9925690000 9925700000 9925710000 9925730000 9929830000 9925740000 9925750000 9925760000 9925770000 9925780000 9925790000 9925800000 Circuit Breaker -- Trip Curves Thermal Magnetic Type Typical time/current characteristics at 23C 9100 Series M1 0.5 to 6 A 10,000 M1 AC 10 to 40 A 10,000 23C 23C 100 100 1 Trip time in seconds 100 Trip time in seconds 1,000 Trip time in seconds 1,000 10 10 1 10 1 0.1 0.1 0.1 0.01 0.01 0.01 0.001 0.8 1 2 3 4 6 8 10 20 30 ... times rated current 50 70 100 AC 63 A 23C 1,000 0.001 0.001 0.8 1 2 3 4 6 8 10 20 30 50 70 100 ... times rated current Note: "C" trip time characteristics according to VDE 064 A4/11.88 (9100 Series only) 40 M1 10,000 0.8 1 2 3 4 6 8 10 20 30 ... times rated current 50 70 100 Current Ratings (amps) 0.5 1.0 2.0 3.0 4.0 6.0 10.0 13.0 16 20 25 32 40 50 63 Part No. 9925810000 9925820000 9925840000 9925850000 9925860000 9925870000 9925890000 9929840000 9925900000 9925910000 9925920000 9925930000 9925940000 9925950000 9925960000 Circuit Protection Circuit Breakers CB9101-16 Thermal Magnetic Type Dimensions in mm Technical Data Rated voltage & current UL 1077 CSA VDE Creepage resistance Insulation resistance Interrupting capacity (UL 1077/EN 609334 PC1) Auxiliary Contact Modules 347 / 600 VAC (0.5...32 A); 277 / 480 VAC (40...63 A) 347 / 600 VAC (0.5...32 A); 277 / 480 VAC (40...63 A) 240 / 415 VAC (0.5...63 A) PTI 250 to IEC 112 >100 M at 500 VDC Current ratings Rupture capacity (3X) Voltage 0.5...63 A 10,000 A (UL) 277 / 480 AC 0.5...32 A 2,000 A (UL) 347 / 600 AC 0.5...63 A 6,000 A (UL) 48 VDC (1) pole 0.5...50 A 6,000 A (UL) 110 VDC (2) poles 6,000 operations 20 g (10 ms) 2 (17.7) 3 g (10 to 55 Hz) -25C...+55C (-13F to 131F) 1 pole (130 g); 2 pole (280 g); 3 pole (430 g) 12 mm Voltage Current AC 220/240 5A AC 277 3A DC 24 V 4A DC 60 V 1A DC220 V 0.4 A #18...2 AWG (line); #18...3 AWG (load) Type 3 pole bus, 10 x 1010 mm, buses (19) 3 phase groupings 3 pole bus, 16 x 210 mm, buses (4) 3 phase groupings 3 pole bus, 16 x 1010 mm, buses (19) 3 phase groupings 1 pole bus, 12 x 210 mm, buses 12 breakers 1 pole bus, 12 x 210 mm (insulated), buses 12 breakers Bus bar clamp Part No. 9970330000 9970340000 9970350000 9970360000 9991990000 9970370000 Auxiliary contacts SPDT DPDT Auxiliary contacts Auxiliary contacts 9970300000 9970310000 Security hardware Lock out cover 9970380000 ETO 10/26, yellow (26 mm x 10 mm) ETO 12.7/25.4, white (25.4 mm x 12.7 mm) 1609620000 9990080000 Typical life at 1x rated current Shock Torque Nm (lb. in.) Vibration Temperature range - operating Weight Strip length Auxiliary contact rating Wire size - #22...12 AWG Wire size (UL) Accessories Jumpers Marking Tags Adhesive label RAIL MOUNTED TERMINAL BLOCKS: W-SERIES Internal Wiring Diagram Note: N/O-Auxiliary contact will be open during normal state. Aux. will close when breaker trips. N/C-Auxiliary contact will be closed during normal state. Aux. will open when breaker trips. Internal Auxiliary Wiring Diagram Note: N/O-Auxiliary contact will be open during normal state. Aux. will close when breaker trips. N/C-Auxiliary contact will be closed during normal state. Aux. will open when breaker trips. 41