Single In-Line Conformal Series 770 Technical Data Features * * * * * * High-Reliability Cermet Resistors Space Saving Over Individual Resistors Available in Odd or Even Number of Pins From 4 to 12 Leads 2.54mm/.100 in. Pin Spacing Packaged in Bulk RoHS Compliant Resistance Tolerance: Resistance Range: Standard: 2% or 0.5 (whichever is greater) Standard: 10 to 1 Meg Operating Temperature Range: -55C to +125C Dielectric Strength: 100 VAC Temperature Coefficient: Standard: 100 to 1 Meg 100PPM/C typical 22 to 99 200PPM/C typical Maximum Operating Voltage: 100V not to exceed rated power Types of Circuits Bussed (Schematic 1) Isolated (Schematic 3) Bussed Schematic 1 Available in 4 through 12 Pins Isolated Schematic 3 Available in 4, 6, 8, 10, 12 Pins 1 of 3 CTS Electronic Components Dual Terminator (Schematic 5) Isolated CTS Schematic 5 Available in 6, 8, 10 Pins May 2006 www.ctscorp.com Package Dimensions NOTES: Number of Pins 4 5 6 7 8 9 10 11 12 Schematic 1&5 "A" Dimension +/-0.25/0.010 10.11/0.398 12.65/0.498 15.19/0.598 17.30/0.698 20.27/0.798 22.81/0.898 25.35/0.998 27.89/1.098 30.43/1.198 Packaged Power @25C 0.60W 0.83W 0.96W 1.18W 1.32W 1.49W 1.66W 1.83W 2.00W Packaged Power @25C 0.15W Packaged Power @70C 0.40W 0.52W 0.64W 0.76W 0.88W 1.00W 1.11W 1.24W 1.35W Packaged Power @70C 0.10W 0.30W 0.20W 3 *General Tolerances mm +/-0.25 inch +/-0.010 *Copper Alloy Leads, Solder-coated Standard Resistor Values & EIA Code Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code 10 100 75 750 510 511 3.9K 392 33K 333 270K 274 12 120 82 820 560 561 4.7K 472 39K 393 330K 334 15 150 100 101 680 681 5.1K 512 47K 473 390K 394 18 180 110 111 820 821 5.6K 562 51K 513 470K 474 22 220 120 121 1K 102 6.8K 682 56K 563 510K 514 27 270 150 151 1.2K 122 8.2K 822 68K 683 560K 564 33 330 180 181 1.5K 152 10K 103 82K 823 680K 684 39 390 220 221 1.8K 182 12K 123 100K 104 820K 824 47 470 270 271 2.0K 202 15K 153 120K 124 1M 105 51 510 330 331 2.2K 222 18K 183 150K 154 56 560 390 391 2.7K 272 22K 223 180K 184 68 680 470 471 3.3K 332 27K 273 220K 224 Page 2 of 3 CTS Electronic Components May 2006 www.ctscorp.com How to Order 770 10 1 103 RoHS Compliant (Sn/Ag solder) Part Number Series Number of Pins Resistor Code Schematic NOTE: No dashes or spaces to appear in part number. Example: 770101103P P 1 Bussed 3 Isolated 5 Dual Terminator Refer to the EIA Code Noted on Page 2. Resistor Code Schematics 1 & 3 Resistor Value Schematic 5 Example 220/330 = 220/330 All part numbers are 2% Packaging Bulk Pack All Products 250 Parts/Bag Environmental Performance Specifications Test Thermal Cycling Short Time Overload Moisture Resistance Load Humidity High Temp Exposure Load Life Resistance to Solder Heat Mechanical Shock Vibration Terminal Strength Low Temp Storage Low Temp Operation Flammability Non-Fungus per MIL-STD 810C Resistance to Solvents Solderability Page 3 of 3 CTS Electronic Components Max. % Mil. Std. Test Cond. Test Description Delta R 202 Method 0.5% 107 B 5 cycles, -65C to +125C 0.5% 2 1/2 x rated voltage, 5 sec (100V Max.) 0.5% 106 240 hours, 0.1 rated load, -10C to +65C, 90% RH 1.0% 1000 hours, 0.1 rated load, 70C, 85-92% RH 1.0% 240 hours, no load, @ 125C 1.0% 108 D 1000 hours @ 70C rated load 0.25% A 3 second dwell @ 350C, dwell 0.25% 213 I 100g, 1 msec., 3 shocks each plane 0.25% 204 D 20g, 10-2000Hz, 4 hours/plane 0.25% 2.0 Kg. pull, 30 sec., three 45 bends 0.25% 24 hours @ -65C, no load 0.25% 45 min @ -65C, full load N/A 94V-0 Isopropyl alcohol RMA Flux, 230C, 5 seconds dip, 95% coverage May 2006 www.ctscorp.com