SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SH6 SERIES SUBMINIATURE PUSHWHEEL SWITCHES FEATURES The smallest panel mounting pushwheel switches available . Snap action detent with audible click. Black housing & drum with white printing. Gangable front and rear mounting models. Gold wiping action contacts. P.C. board options include solderable lands, fingers or p.c. solder pins. SH6, SH6G & SH6S SPECIFICATIONS Panel mounting hole: Height Width Installed depth with p.c. board: Short Long Insertion from front Insertion from rear MATERIALS Body: .590"(15mm) .236"(6mm) .925"(23.5mm) 1.213"(30.8mm) yes yes CODES Code positions marking 131 BCD 10 0-9 137 BCD comp 10 0-9 400 change-over 10 +,-,+,-,etc.. see truth tables see truth tables see truth tables PPO PC board: FR 4 DIN 40802 IEC 249-2, Contact surface gold over nickel on copper Sliding contact: Gold over nickel on copper alloy STANDARD COLORS Housing,Drum,Printing 2 = black 3 = white 2,2,3 T ELECTRICAL DATA Operating voltage: Contact load, static: Contact load, dynamic: Contact resistance (type AK): 40 V max. 0.5 A max. 100 mA max. less than 100 mOhm TECHNICAL DATA Operating temperature range: Electric life, min. switching cycles Actuation force, approx (oz.): Weight, approx. (grams): Character height: Audible click Vibration DIN IEC 68, parts 2-6 Shock DIN 40046, part 7 -20C to 80C 100,000 14 1.5 .122"(3.1mm) yes yes yes Other special features are available upon request including: Factory or customer set stops Red digits Decimal point Special codes or printing APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com T1 SH6 SERIES SUBMINIATURE PUSHWHEEL SWITCHES TRUTH TABLES SH6 & SH6G CODE 137 BCD COMP. C 1 2 4 8 0 1 2 3 4 5 6 7 8 9 SH6 & SH6G CODE 400 CHANGE-OVER C 1 2 4 8 C 0 1 2 3 4 5 6 7 8 9 MECHANICAL OUTLINES WITH PANEL CUT-OUTS SH6 A+ A- + + + + + n = number of switches SH6G PIN CONNECTIONS T 131 137 400 1 2 4 8 C 2 8 C 1 4 + C 131/1 C 8 1 4 2 The switching mode is shorting - i.e. - even during actuation, at least one output is connected to input C. SH6S131/AKULS2 T2 APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ALL MODELS CODE 131 BCD SH6 SERIES SUBMINIATURE PUSHWHEEL SWITCHES PRINTED CIRCUIT OPTIONS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE P.C. boards have .039" (1mm) holes and are suitable for soldering or socket connection. AK short p.c. board AL long p.c. board AKK p.c. board w/fingers AKLS or ALLS p.c. board w/solder pins (Allows customer to add resistors, diodes, ect.) MOUNTING INFORMATION Front mounting (SH6) Rear mounting (SH6 and SH6G) Rear mounting (SH6S) Ordering information: Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from available options shown and filling in the boxes. Consult factory for fully assembled switches. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Series model Code P.C. board Standard colors 2 1 3 1 BCD (all models) S H 6 1 3 7 BCD comp. (SH6 & SH6G only) S H 6 G 4 0 0 Change-over (SH6 & SH6G only) S H 6 S* 1 3 1 / 1 BCD (SH6S only) (see outline dwgs.) Example of complete * For this model, only SH6S131/1AKULS2 model no.: SH6131AK2 available,see outline drawing. ACCESSORIES A A A A A A K L K K L K Short Black housing Long and drum. K w/fingers White lettering L S Short w/p.c. solder pins L S Long w/p.c. solder pins U L S Short w/rt. angle solder pins T Order separately SH6L2 or SH6GL2 Dummy switches SH6L2 Dummy housing SH6GL2 Dummy housing These are empty plastic housings with the same dimensions as SH6 & SH6G models (see outlines). Use to fill hole where switch is not needed. APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com T3