SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
T
APEM
, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com T1
SH6 SERIES SUBMINIATURE PUSHWHEEL SWITCHES
FEATURES
The smallest panel mounting pushwheel switches available .
Snap action detent with audible click.
Black housing & drum with white printing.
Gangable front and rear mounting models.
Gold wiping action contacts.
P.C. board options include solderable lands, fingers or p.c. solder pins.
SH6, SH6G & SH6S SPECIFICATIONS
Panel mounting hole:
Height .590"(15mm)
Width .236"(6mm)
Installed depth with p.c. board:
Short .925"(23.5mm)
Long 1.213"(30.8mm)
Insertion from front yes
Insertion from rear yes
CODES
Code positions marking
131 BCD 10 0-9 see truth tables
137 BCD comp 10 0-9 see truth tables
400 change-over 10 +,-,+,-,etc.. see truth tables
ELECTRICAL DATA
Operating voltage: 40 V max.
Contact load, static: 0.5 A max.
Contact load, dynamic: 100 mA max.
Contact resistance (type AK): less than 100 mOhm
TECHNICAL DATA
Operating temperature range: -20°C to 80°C
Electric life, min. switching cycles 100,000
Actuation force, approx (oz.): 14
Weight, approx. (grams): 1.5
Character height: .122"(3.1mm)
Audible click yes
Vibration DIN IEC 68, parts 2-6 yes
Shock DIN 40046, part 7 yes
MATERIALS
Body: PPO
PC board: FR 4 DIN 40802
IEC 249-2, Contact
surface gold over
nickel on copper
Sliding contact: Gold over nickel
on copper alloy
STANDARD COLORS
Housing,Drum,Printing
2 = black 3 = white 2,2,3
Other special features are available upon
request including:
Factory or customer set stops
Red digits
Decimal point
Special codes or printing
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
T
APEM
, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com
T2
SH6 SERIES SUBMINIATURE PUSHWHEEL SWITCHES
SH6 & SH6G
CODE 137
BCD COMP.
C1248
0
1
2
3
4
5
6
7
8
9
ALL MODELS
CODE 131
BCDC1248
0
1
2
3
4
5
6
7
8
9
SH6 & SH6G
CODE 400
CHANGE-OVER
CA+A-
+
-
+
-
+
-
+
-
+
-
TRUTH TABLES
SH6 SH6G
n = number of switches
PIN CONNECTIONS
MECHANICAL OUTLINES WITH PANEL CUT-OUTS
131 1248C
137 28C14
400 -+C
131/1 C8142
The switching mode is shorting - i.e. - even during actuation,
at least one output is connected to input C.
SH6S131/AKULS2
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
T
APEM
, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com T3
SH6 SERIES SUBMINIATURE PUSHWHEEL SWITCHES
PRINTED CIRCUIT OPTIONS
MOUNTING INFORMATION
P.C. boards have .039" (1mm) holes and are suitable for soldering or socket connection.
AK AL AKK AKLS or ALLS
short p.c. board long p.c. board p.c. board w/fingers p.c. board w/solder pins
Front mounting (SH6) Rear mounting (SH6 and SH6G) Rear mounting (SH6S)
'BUILD YOUR OWN SWITCH' ORDER FORMAT
Ordering information: Below is an order format that enables you to 'build your own switch' and specify the correct switch model
number by simply selecting from available options shown and filling in the boxes. Consult factory for fully assembled switches.
131 BCD (all models)
137 BCD comp. (SH6 & SH6G only)
400 Change-over (SH6 & SH6G only)
1 3 1 / 1 BCD (SH6S only)
Black housing
and drum.
White lettering
SH6
SH6G
SH6S*
(see outline dwgs.)
Series model Code P.C. board Standard colors
Example of complete
model no.: SH6131AK2
ACCESSORIES Order separately
SH6L2 Dummy housing SH6GL2 Dummy housing
2
* For this model, only SH6S131/1AKULS2
available,see outline drawing.
AK Short
AL Long
AKK w/fingers
AKLS Short w/p.c. solder pins
ALLS Long w/p.c. solder pins
AKULS Short w/rt. angle solder pins
SH6L2 or
SH6GL2
Dummy
switches
These are empty
plastic housings
with the same dim-
ensions as SH6 &
SH6G models (see
outlines). Use to fill
hole where switch
is not needed.
(Allows customer to add
resistors, diodes, ect.)
