1
62 GB
- Series Accessories
Miniature Bayonet Lock Connectors
Complies with MIL-C-26482
CE
-2Aa
This miniature bayonet lock connector series offers designers
important features not found in any other range of connectors.
They are developed and manufactured entirely in the U.K.
by AMPHENOL Ltd., and have full qualification approval to
British Standards Specification BS 9522 F0017 and British
Defence Specification DEF STAN 59-35 (Part 3) Sec. 7.
Amphenol
This catalogue to be used in conjunction with Catalogues:
CE-2Pa – 62GB Series Plugs
CE-2Ra – 62GB Series Receptacles
Page
Amphenol 62GB Solder Connectors 3
Schedule of Tests 4-5
Accessories - Table of Styles 6-7
Accessories 8-14
Cable Accessories - Table of Styles 15-16
Cable Accessories 17-21
3
Amphenol ® 62GB
solder connectors
This miniature bayonet lock connector series offers
designers important features not found in any other range
of connectors. The range has full qualification approval to
British Standards Specification BS 9522 FOO 17 and British
Defence Specification DEF STAN 59-35 (Part 3) Sec. 7.
62GB Series connectors - developed and manufactured
entirely in the United Kingdom by Amphenol Limited. They
are the first and only British connectors to have achieved
this. A doubly strong position which Amphenol are well
geared to handle. The manufacturing facilities of the
Whitstable plant have been cited as exemplary in Europe.
Certainly the layout is extensive and extremely efficient;
safety awards have been attained every time returns have
been submitted to the British Safety Council.
62GB Series connectors have been well established with
Government authorities on an international scale and users
can be found in Sweden, Denmark, Norway, Finland,
Germany, Spain, Holland, India, Canada and Italy.
Derating
Connectors must be derated under the following
operating conditions:
1. At elevated ambient temperatures, the current ratings
are reduced so that total maximum hot spot
temperature of 125°C is not exceeded.
2. At high altitudes, revised voltage ratings become
effective as shown on page 7.
3. When connectors to different specifications are
intermated (e.g. BS 9522 FOO 17 and
MIL-C26482), the combination must not be
operated under conditions more severe than the
less stringent clause of either specification.
Amphenol 62GB connectors are designed to meet
the most stringent requirements of both
specifications.
Military Specifications
British Standards Specification BS 9522 FOO 17
closely corresponds to the United States Military
Specification MIL-C-26482 solder terminations.
Certain differences exist between the schedules which
can be seen on pages 2 and 3.
Approved gauges are used to check interchangeability
of 62GB series with other connectors manufactured to
BS 9522 FOO 17 or MIL-C-26482.
Basic Construction
Connector shells are machined from solid aluminium bar
stock - not forged or extruded as in competitive designs.
Machining has inherent advantages in terms of strength
and adaptability. 62GB Series can be supplied in brass or
stainless steel, for instance.
The normal shell finish used, which has a high resistance to
corrosion, is zinc cobalt olive drab. Other finishes may be
supplied to special order, such as cadmium plate which is
available by adding deviation (714) to the end of part
number.
Inserts are of polychloroprene rubber compounded to an
Amphenol specification. Operating temperature range is
-55°C to 125°C, and the connectors have gold-plated
contacts designed for soldered connections. Configurations
for size 20 contacts range between 2 contacts in the size 8
12.7mm (0.5in diameter) shell up to a maximum of 61
contacts in the size 2436.1 mm (1.5in diameter) shell.
Intermediate sizes, and contact data for heavier current
ratings are shown in the insert availability chart on page 6
and 7.
Hermetic connectors with glass sealed dialectric are
manufactured with mild steel shells and nickel iron
contacts plated tin over copper.
*Other finishes are available on request.
Protection Against Mis-Mating or Cross-Plugging
In BS 9522 FOO 17 positive shell-to-shell keying is
provided with keys and keyways in a choice of either the
normal (N) or any of the four preferred alternate
positions: B, C, E and F. This prevents mismating between
shells of different orientations and overcomes the
difficulties associated with rotated inserts and a standard
key-keyway orientation. In the latter system, damage to
the inserts or contacts can result if excessive force is used
to engage non-mating pairs.
Rotated inserts are, however, permissible in BS 9522 FOO
17 connectors if required to mate with or replace units to
MIL-C-26482 mounted in existing equipment. Connectors
have normal orientations manufactured to BS 9522 FOO 17
or MIL-C-26482 are fully intermateable as also are
connectors with inserts in positions W, X, Y or Z.
This catalogue to be used in conjunction with Catalogues:
CE-2Pa – 62GB Series Plugs
CE-2Ra – 62GB Series Receptacles
4
Schedule of Tests
Required for Qualification
Approval
Tests
Visual Examination
Dimensions, outline mass(including
contacts) Compatability Gauging
procedure
Polarization
Engaging and separating force, connector
Contact Holding Force
Sealing (air pressure)
Sealing Hermetic
Contact Resistance
Housing (Shell) Continuity
Insulation Resistance
Voltage Proof
Soldering
Bumping
Vibration
Shock
Acceleration (Steady State)
Rapid Change of Temperature
Climatic Sequence
Flammability
Damp Heat (Steady State)
Brief Description
Engagement max: 0,90 Nm (8.0 lbf.in.) to
4,97 Nm (44 lbf.in.) according to shell size.
Separation min: 0,22 Nm (2.0 lbf.in.) to 1,58
Nm (14.0 lbf.in.) according to shell size.
0,21 N (0.047 lbf) min.size 20
0,56 N (0.126 lbf)min. size 16
Max leakage 28,53 uNm/s (1 cm3/h), 1
bar (14.5 p.s.i.) differential.
Hermetic receptacles have a max leak of 0.1 micron
cubic foot per hour (1 x 10-6Cm3/s)
5 milliohms max.
200 milliohms max. 5 milliohms max.
grounding spring styles.
5,000 Megaohms at 500 - 50 V d.c.
See page 7. Duration 1 minute
As BS 9520: 1974, Clause 1.2.6.6,
Method 2.
As BS 9520: 1974, Clause 1.2.6.1. 4,000
-10 bumps / 390m / s2 (40 gn).
As BS 9520: 1974, Clause 1.2.6.2.1. Procedure A. 10 Hz
to 5000 Hz, 0.75 mm / 10 gn.
As BS 9520: 1974, Clause 1.2.6.3. 981
m/s2 (100 g n).
As BS 9520: 1974, Clause 1.2.6.4. 490
m/s2 (50 gn).
As BS 9520: 1974, Clause 1.2.6.7. -550
C to - 1250 C.
As BS 9520: 1974, Clause 1.2.6.11.
Severity 55/125/56.
As BS 9520: 1974, Clause 1.2.6.8. Direct
flame applied, duration 1 minute.
As BS 9520: 1974, Clause 1.2.6.14.
Severity 56 days.
5
Schedules of Tests
Required for Qualification
Approval
Tests Brief Description
Immersion (at low air pressure)
Mechanical Endurance
High Temperature Endurance
Mould Growth
Salt Mist
Dust
Robustness of Terminations
Contact Retention (in insert)
Insert Retention (in shell)
Test Prod Damage
Impact
Grounding Spring Holding Force Plugs
with grounding springs only.
Fluid Resistance
Compass Safe Distance
3 cycles at 30 mins each cycle, total immersion in
water at pressure 44 m bar.
500 operations minimum
Long term: 1,000 hrs. at 850 C ambient carrying the
specified current. Short term: 250 hrs at 1250 C, no
current.
As BS 9520: 1974, Clause 1.2.6.15. 28
days duration.
As BS 9520: 1974, Clause 1.2.6.16.
Severity 1.
As BS 9520: 1974, Clause 1.2.6.17
Exposure 30 minutes.
44,5 N (101bf) size 16
22,2 N (5 lbf) size 20
67,0 N (15 lbf) min. size 20
112,0 N (25 lbf) min. size 16
517 KN1m2 (751bf/in2) min.
Moment: 0,056 Nm (0.5 lbf in) size 20
0,225 Nm (2 lbf in) size 16
Five impacts, drop height 1 m (3ft.3 in.).
1,17 N (0.263 lbf) to 2,74 N (0.616 lbf)
according to size.
Immersion in 4 solvents and 9 fluids
including aircraft fuels, lubricating oils and
hydraulic fluids.
As BS 9520: 1974, Clause 1.2.5.11. 127
mm (5.0 in) min.
6
Accessories
Table of Styles
62GB
-738
62GB
-812
62GB
-813
Page No.
42
42
43
43
44
44
45
62GB-737
62GB-736
62GB-742
62GB-810
7
Accessories
Table of Styles
62GB
-814
62GB
-997
62GB
-998
62GB
-1069
62GB
-1070
62GB
-760
Page No.
45
46
46
47
47
48
8
Accessories
736
62GB
-736
Caps and chains for single hole mounting
receptacles
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
(± 0.13)
C
dia
max
J
± 0.005
(± 0,127)
3.0 0.521 0.734 0.578
08 76.2 13.23 18.64 14.68
3.0 0.521 0.859 0.703
10 76.2 13.23 21.82 17.86
3.5 0.521 1.000 0.891
12 88.9 13.23 25.4 22.63
3.5 0.521 1.125 1.016
14 88.9 13.23 28.57 25.81
3.5 0.521 1.250 1.141
16 88.9 13.23 31.75 29.39
3.5 0.521 1.375 1.266
18 88.9 13.23 34.92 32.16
4.0 0.521 1.500 1.391
20 101.6 13.23 38, 1 35.33
4.0 0.521 1.625 1.516
22
9
Accessories
738
62GB
-738
Caps and chains for flange mounting
receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
(± 0.13)
C
dia
max
J
± 0.005
(± 0.127)
3.0 0.521 0.734 0.125
08 76.2 13.23 18.64 3.18
3.0 0.521 0.859 0.125
10 76.2 13.23 21.82 3.18
3.5 0.521 1.000 0.125
12 88.9 13.23 25.4 3.18
3.5 0.521 1.125 0.125
14 88.9 13.23 28.57 3.18
3.5 0.521 1.250 0.125
16 88.9 13.23 31. 75 3.18
3.5 0.521 1.375 0.125
18 88.9 13.23 34.92 3.18
4.0 0.521 1.500 0.125
20 101.6 13.23 38.1 3.18
4.0 0.521 1.625 0.125
22 101.6 13.23 41.27 3.18
4.0 0.556 1.750 0.152
24 101.6 14.12 44.45 3.86
742
62GB
-742
Caps and chains for plugs.
Shell
Size A
± 0.25
( ± 6.35)
B
± 0.005
( ± 0.13)
C
dia
max
J
± 0.005
( ± 0.127)
3.0 0.522 0.719 0.125
08 76.2 13.25 18.26 3.18
3.0 0.522 0.844 0.125
10 76.2 13.25 21.43 3.18
3.5 0.522 1.000 0.125
12 88.9 13.25 25.4 3.18
3.5 0.522 1.125 0.125
14 88.9 13.25 28.57 3.18
3.5 0.522 1.250 0.125
16 88.9 13.25 31.75 3.18
3.5 0.522 1.357 0.125
18 88.9 13.25 34.92 3.18
4.0 0.584 1.500 0.125
20 101.6 14.83 38.1 3.18
4.0 0.584 1.625 0.125
22 101.6 14.83 41.27 3.18
4.0 0.617 1.750 0.152
24 101.6 15.67 44.45 3.86
10
Accessories
810
62GB
-810
BS9522-F0017-A2012
Caps and cords for plugs
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
(± 0.13)
C
dia
max
J
± 0.003
(± 0.08)
3.0 0.522 0.719 0.145
08 76.2 13.25 18.26 3.68
3.0 0.522 0.844 3.685
10 76.2 13.25 21.43 3.68
3.5 0.522 1.000 0.145
12 88.9 13.25 25.4 3.68
3.5 0.522 1.125 0.145
14 88.9 13.25 28.57 3.68
3.5 0.522 1.250 0.145
16 88.9 13.25 31.75 3.68
4.0 0.584 1.500 0.145
20 101.6 14.83 38.1 3.68
4.0 0.584 1.625 0.145
22 101.6 14.83 41.27 3.68
4.0 0.617 1.750 0.171
24 101.6 15.67 44.45 4.34
812
62GB
-812
BS9522-F0017-A2013
Caps and cords for flange mounting
receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
(± 0.13)
C
dia
max
J
± 0.003
(± 0.08)
3.0 0.521 0.734 0.145
08 76.2 13.23 18.64 3.68
3.0 0.521 0.859 0.145
10 76.2 13.23 21.82 3.68
3.5 0 521 1 .000 0.145
12 88.9 13.23 25.4 3.68
3.5 0.521 1.125 0.145
14 88.9 13.23 28.57 3.68
3.5 0.521 1 .250 0.145
16 88.9 13.23 31.75 3.68
3.5 0.521 1.375 0.145
18 88.9 13.23. 34.92 3.68
4.0 0.521 1.500 0.145
20 101.6 13.23 38.1 3.68
4,0 0.521 1.625 0.145
22 101.6 13.23 41.27 3.68
4.0 0.556 1.750 0.171
24 101 .6 14.12 44.45 4.34
11
Accessories
813
62GB
-813
BS9522-F0017 A2014
Caps and cords for single hole mounting
receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
(± 0.13)
C
max J
+ 0.010
(+ 0.25)
3.0 0.521 0.734 0.578
08 76.2 13.23 18.64 14.68
3.0 0.521 0.859 0.703
10 76.2 13.23 21.82 17.86
3.5 0.521 1.000 0.891
12 88.9 13.23 25.4 22.63
3.5 0.521 1.125 1.016
14 88.9 13.23 28.57 25.81
3.5 0.521 1.250 1.141
16 88.9 13.23 31.75 29.39
3.5 0.521 1.375 1.266
18 88.9 13.23 34.92 32.16
4.0 0.521 1.500 1.391
20 101.0 13.23 38.1 35.33
4.0 0.521 1.625 1.516
22 101.6 13.23 41.27 38.56
4.0 0.556 1.750 1.641
24 101.6 14.12 44.45 41.68
814
62GB
-814
Caps and cords for cable mounting receptacles.
Shell
Size A
± 0.25
( ± 6.35)
B
± 0.005
( ± 0.13)
C
max J
+0.010
( + 0.25)
3.0 0.521 0.734 0.453
08 76.2 13.23 18.64 11.50
3.0 0.521 0.859 0.578
10 76.2 13.23 21.82 14.64
3.5 0.521 1.000 0.703
12 88.9 13.23 25.4 17.85
3.5 0.521 1.125 0.891
14 88.9 13.23 28.57 22.63
3.5 0.521 1.250 1.016
16 88.9 13.23 31.75 25.80
3.5 0.521 1.375 1.141
18 88.9 13.23 34.92 28.98
4.0 0.521 1.500 1.266
20 101.6 13.23 38.1 32.15
4.0 0.521 1.625 1.391
22 101.6 13.23 41.27 35.33
4.0 0.556 1.750 1.516
24 101.6 14.12 44.45 38.50
12
Accessories
997
62GB
-997
Caps and chains ribbed for single hole
mounting receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
( ± 0.13)
C
dia
max
J
+ 0.010
( + 0.25)
3.0 0.521 0.892 0.578
08 76.2 13.23 22.66 14.69
3.0 0.521 1.017 0.703
10 76.2 13.23 26.84 17.86
3.5 0.521 1.142 0.891
12 88.9 13.23 29.01 22.64
3.5 0.521 1.267 1.016
14 88.9 13.23 32.19 25.81
3.5 0.521 1.454 1.141
16 88.9 13.23 36.94 28.99
3.5 0.521 1.563 1.266
18 88.9 13.23 39.70 32.16
4.0 0.521 1.687 1.391
20 101.6 13.23 42.85 35.34
4.0 0.521 1.797 1.516
22 101.6 13.23 45.65 38.51
4.0 0.556 1.922 1.641
24 101.6 14.12 48.82 41.69
998
62GB
-998
Caps and chains ribbed for plugs.
Shell
Size A
± 0.25
(± 6.35)
g
max C
dia
max
J
± 0.005
( ± 0.13)
3.0 0.562 0.892 0.125
08 76.2 1428 22.66 3.18
3.0 0.562 1.017 0.125
10 76.2 14.28 25.84 3.18
3.5 0.562 1.142 0.125
12 88.9 1428 29.01 3.18
3.5 0.562 1.267 0.125
14 88.9 14.28 32.19 3.18
3.5 0.562 1.454 0.125
16 88.9 14.28 36.94 3.18
3.5 0.562 1.563 0.125
18 88.9 14.28 39.70 3.18
4.0 0.624 1.687 0.125
20 101 .6 15.85 42.85 3.18
4.0 0.624 1.797 0.125
22 101.6 15.85 45.65 3.18
4.0 0.624 1.922 0.147
24 101.6 15.85 48.82 3.74
13
Accessories
1069
62GB
-1069
Caps and cords ribbed for single hole
mounting receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
±.0.005
( ± 0.13)
C
dia
max
J
+ 0.010
( + 0.25)
3.0 0.521 0.892 0.578
08 76.2 13.23 22.66 14.69
8.0 0.521 1.017 0.703
10 76.2 13.23 26.84 17.86
3.5 0.521 1.142 0.891
12 88.9 13.23 29.01 22.64
3.5 0.521 1.267 1.016
14 88.9 13.23 32.19 25.81
3.5 0.521 1.454 1.141
16 88.9 13.23 36.94 28.99
3.5 0.521 1.563 1.266
18 88.9 13.23 39.70 32.16
4.0 0.521 1.687 1.391
20 101.6 13.23 42.85 35.34
4.0 0.521 1.797 1.516
22 101.6 13.23 45.65 38.51
4.0 0.556 1.922 1.641
24 101.6 14.12 48.82 41.686
1070
62GB
-1070
Caps and cords ribbed for flange mounting
receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
( ± 0.13)
C
Dia
max
J
± 0.005
(± 0.13)
3.0 0.521 0.892 0.117
08 76.2 13.23 22.66 3.03
3.0 0.521 1.017 0.119
10 76.2 13.23 22.66 3.03
3.5 0.521 1.142 0.119
12 88.9 13.23 29.01 3.03
3.5 0.521 1.267 0.119
14 88.9 13.23 32.19 3.03
3.5 0.521 1.454 0.119
16 88.9 13.23 36.94 3 03
3.5 0.521 1.563 0.119
18 88.9 13.23 39.70 3.03
4.0 0.521 1.687 0.119
20 101.6 13.23 42.85 3.03
4.0 0.521 1.797 0.119
22 101.6 13.23 45.65 3.03
4.0 0.556 1.922 0.147
24 101.6 14.12 48.82 3.74
14
Accessories
760
62GB
-760
Flange mounting gasket for box
mounting and hermetic receptacles.
Shell
Size 0
± 0.010
(± 0.254)
E
± 0.010
(± 0.254)
F
± 0.008
(± 0.20)
G
+ 0.010
(+ 0.254)
H
0.812 0.594 0.508 0.130 0.042 / 0.016
08 20.62 15.08 12.90 3.30 1.06 / 0.40
0.938 0.719 0.633 0.130 0.042 / 0.016
10 23.82 18.26 16.07 3.30 1.06 / 0.40
1.031 0.813 0.758 0.130 0.042 / 0.016
12 26.18 20.65 19.25 3.30 1.06 / 0.40
1.125 0.906 0.883 0.130 0.042 / 0.016
14 28.57 23.01 22.42 3.30 1.06 / 0.40
1.219 0.969 1.008 0.130 0.042 / 0.016
16 30.96 24.61 25.60 3.30 1.06 / 0.40
1.312 1.063 1.133 0.130 0.042 / 0.016
18 33.32 27.00 28.77 3.30 1.06 / 0.40
1.438 1.156 1.258 0.130 0.042 / 0.016
20 36.52 29.36 31.95 3.30 1.06 / 0.40
1.563 1.250 1.383 0.130 0.042 / 0.016
22 39.70 31.75 35.13 3.30 1.06 / 0.40
1.688 1.375 1.508 0.156 0.042 / 0.016
24 42.87 34.92 38.30 3.96 1.06 / 0.40
15
Cable Accessories
Table of Styles
62GB
-584
62GB
-585
62GB
-586
62GB
-587
62GB
-711
62GB
-720
62GB
-776
Page No.
51
51
52
52
53
53
54
16
Cable Accessories
Table of Styles
62GB
-1225
62GB
-5028
Page No.
54
55
17
Cable Accessories
584
62GB
- 584
- XX
- XXS or P
BS 9522 FOO 17 A2102
Grommet seal and nut. Provides an
environmental seal for the exposed solder
buckets in the openback class T shells. Suffix XX - XXS or P enables grommet to be matched to the insert
arrangement.
Shell
Size AG
max
0.545 0.561
08 13.84 14.25
0.545 0.686
10 13.84 17.43
0.545 0.811
12 13.84 20.60
0.545 0.936
14 13.84 23.78
0.545 1.061
16 13.84 26.95
0.545 1.186
18 13.84 30.13
0.545 1.311
20 13.84 33.30
0.545 1.436
22 13.84 36.75
0.501 1.561
24 12.73 39.65
585
62G B
- 585
- XX
- XXS or P
BS9522 FOO 17 A2103
Grommet and nut with strain relief clamp. The
clamp prevents the flexing of the wires in the
immediate vicinity of the risers, so avoiding
the risk of leaks. Suffix XX - XXS or P enables grommet to be matched to the insert
arrangement.
Shell
Sine A
max G
max max
0.991 0 828 0.161
08 25.17 21.03 4.09
0.991 0.891 0.193
10 25.17 22.63 4.90
0 991 1.016 0.317
12 25.17 25.81 8.05
0.965 1.141 0.380
14 24.51 28.98 9.65
1.105 1.203 0.505
16 28.07 30.56 12.83
1.105 1.426 0.630
18 28.07 36.22 16.00
1.285 1.426 0.630
20 32.64 36.22 16.00
1.285 1.567 0.755
22 32.64 39.80 19.18
1.373 1.735 0.805
24 34.88 44.07 20.45
18
Cable Accessories
586
62G B
- 586
- XX
Potting mould and ring,
supplied together as a set. Suffix XX specifies shell size.
Shell
Size A
max G
max Z
min
0.644 0.585 0.260
08 16.36 14.85 6.60
0.753 0.679 0.463
10 19.13 17.24 11.76
0.722 0.835 0.557
12 18.34 21.20 14.14
0.722 0.913 0.590
14 18.34 23.19 14.98
0.722 1.038 0.713
16 18.34 26.36 18.11
0.722 1.163 0.835
18 18.34 29.54 21.20
0 877 1.288 1.015
20 22 30 32.71 25.78
0.877 1.413 1.015
22 22.30 35.89 25.78
0.896 1.538 1.263
24 22.76 39.06 32.08
587
62G B - 587 - XX - XXS or P
Clamp for screened jacketed cable. 62 Series
only with grommet. Effective sealing is provided
over the range of cables covered by DEF
10(Pattern C) and DEF STAN 61-12 port (see
table). These are supplied to separate order only
for use with style T shells. Suffix XX-XXS or P enables grommet to be matched to the
insert arrangement.
Shell
Size length
Including
plug
A
Max length
Including
receptacle
B
max G
max
2.732 2.742 0.676 0.775
08 69.39 69.64 17.17 19.68
2.742 2.752 0.676 0.902
10 69.64 69.90 17.17 22.91
3.152 3162 0.812 1.030
12 80.06 80.31 20.62 2616
3.152 3.162 0.926 1.157
14 80.06 80.31 23.52 29.39
3.272 3 282 1.051 1.284
16 83.10 83.36 26.67 32.61
- - - -
18 - - - -
3.272 3.345 1.280 1.539
20 83.10 84.96 32.51 39.09
- - - -
22 - - - -
3.696 3.768 1.620 1.783
24 93.87 95.70 41.15 45.29
19
Cable Accessories
711
62G B
- 711
- XX
- XXS or P
Grommet and nut with right angled strain
relief clamp. The clamp prevents flexing of
the wires in the immediate vicinity of the
risers, so avoiding the risk of leaks (these
are supplied to separate order only for use
with style T shells).
Suffix XX - XXS or P
enables grommet to be
matched to the insert
arrangement.
Shell
Size A
max G
max H
± 0.005
± 0.13
Q
max
1.5/32 0.828 0.161 0.733
08 21.03 4.09 18.62
1.3/16 0.891 0.193 0.795
10 22.63 4.90 20.19
1.7/32 1.016 0.317 0.858
12 25.81 8.05 21.79
1.1/4 1.141 0.380 0.915
14 28.98 9.65 23.24
1.5/16 1.203 0.505 1.010
16 30.56 12.83 25.65
1.3/8 1.426 0.630 1.070
18 36.22 16.00 27.18
1.3/8 1.426 0 630 1.140
20 36.22 16.00 28.96
1.29/64 1.567 0.755 1.170
22 39.80 19.18 29.72
1.15/32 1.735 0.805 1.260
24 44.07 20.45 32.00
720
62G B
- 720
- XX
Clamp for unscreened jacketed cable. No
grommet is supplied, for use with 50T, 51T
and 56T styles. Suffix XX specifies shell size.
Shell
Size A
max G
max Z
closed Z
free
1.085 0.561 0 168 0 230
08 27.56 14.25 4.28 5.84
1.060 0.686 0.205 0.312
10 26.92 17.43 5.21 7.93
1.160 0.81 1 0 338 0.442
12 29.46 20.60 8.59 1 1.23
1.360 0.936 0.416 0.539 1
14 34.54 23.78 10.57 13.69
1.585 1.061 0.550 0.616
16 40.26 26.95 13.97 15.65
1.785 1.186 0.600 0.672
18 45.34 30.13 15.24 17.57
1.981 1.311 0.635 0.747
20 50.32 33 30 16.13 18.98
2.181 1.436 0.670 0.846
22 55.39 36.75 17.02 21.49
2.216 1.561 0.740 0.894
24 56.28 39.65 18.80 22.71
20
Cable Accessories
776
62GB
- 776
General duty shell to accept conduit, AN
3057 or MS 3057 A cable clamps and heat
shrink sleeves.
Shell
Size A
max M
Thread
0.937 1/2 - 28 UNEF
08 23.80
0.937 5/8 - 24 NEF
10 23.80
0.937 3/4 - 20 UNEF
12 23.80
0.937 7/8 – 20 UNEF
14 23.80
0.937 1 - 20 UNEF
16 23.80
0.937 1.3/16 - 18 NEF
18 23.80
0.937 1.3/16 - 18 NEF
20 23.80
0.937 1.7/16 - 18 NEF
22 23.80
0.937 1.7/16 - 18 NEF
24 23.80
1225
62GB
- 1225
900 clamp for screened jacketed cable. These
are supplied to separate order only for use with
style T shells.
Shell
Size A
max B
max C
max D
max
21
Cable Accessories
5028
62G B
- 5028
- XX
- XXS or P
75% Clamp for screened jacketed cable with
grommet. Effective sealing is provided over the
range of cables covered by DEF 10 (Pattern C)
and DEF STAN 61 - 12 part 5 (see table).
These are supplied to separate order only and
are intended for use with style T shells.
Suffix XX-XXS or P
enables grommet to be
matched to the insert
arrangement.
Shell
Size length
including
receptacle
A
Max length
including
plug
B
max G
max max
2.416 2.375 0.676 0.775 1.750
08 61.37 60.24 17.17 19.68 44.45
2.573 2.532 0.676 0.902 1.875
10 65.35 64.39 17.17 22.91 47.63
2.666 2.625 0.812 1.030 2.125
12 67.72 66.68 20.62 26.16 53.98
2.760 2.719 0.926 1.157 2.125
14 70.10 69.04 23.52 29.39 53.98
2.790 2.750 1.051 1.284 2.062
16 70.87 69.80 26.70 32.61 52.38
- - - - -
18 - - - - -
3.312 3.250 1.280 1 539 2.062
20 84.13 82.55 32.51 39 09 52.38
- - - - -
22 - - - - -
3.500 3.375 1.620 1.783 2.187
24 88.90 85.73 41.15 45.29 55.55
22