To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, afliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Afrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
© 2005 Fairchild Semiconductor Corporation DS500313 www.fairchildsemi.com
June 2000
Revised April 2005
FSTD16211 24-Bit Bus Switch with Level Shifting
FSTD16211
24-Bit Bus Switch with Level Shifting
General Descript ion
The Fairchild Switch FSTD16211 provid es 24-bits of high-
speed CMOS TTL-compatible bus switching. The low On
Resistance of the switch allows inputs to be connected to
outputs without adding propagation delay or generating
addition al ground boun ce noise. A diode to VCC has been
integrated into the circuit to allow for level shifting between
5V inputs and 3.3V outputs.
The device is organized as a 12-bit or 24-bit bus switch.
When OE1 is LOW, the switch is ON and Port 1A is con-
nected to Port 1B. When OE2 is LOW, Port 2A is connected
to Port 2B. When OE1/2 is HIGH, a high impedance state
exists between the A and B Ports.
Features
4
:
switch connection between two ports
Voltage level shifting
Minimal propagation delay through the switch
Low lCC
Zero bounce in flow-through mode
Control inputs compatible with TTL level
Also packaged in plastic Fine-Pitch Ball Grid Array
(FBGA)
Ordering Code:
Note 1: Order ing code “G” indicat es T r a ys.
Note 2: Devices also available in Tape and Reel . Specify by appending t he suffix letter “X ” to th e ordering co de.
Logic Diagram
Order Number Package Number Package Description
FSTD16211G
(Note 1)(Note 2) BGA54A 54-Ball Fine-Pitch Ball Grid Array (FBGA), JEDEC MO-205, 5.5mm Wide
[TAPE and REEL]
FSTD16211MTD
(Note 2) MTD56 56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
www.fairchildsemi.com 2
FSTD16211
Connection Diagrams
Pin Assignment for TSSOP
Pin Assignment for FB GA
(Top Thru View)
Pin Descriptions
Pin Assignment for FBGA
Truth Table
Pin Name Description
OE1, OE2Bus Switch Enables
1A, 2A Bus A
1B, 2B Bus B
NC No Connect
123456
A1A21A1NC OE21B11B2
B1A41A31A7OE11B31B4
C1A61A5GND 1B71B51B6
D1A10 1A91A81B81B91B10
E1A12 1A11 2A12B11B11 1B12
F2A42A32A22B22B32B4
G2A62A5VCC GND 2B52B6
H2A82A72A92B92B72B8
J2A12 2A11 2A10 2B10 2B11 2B12
Inputs Inputs/Outputs
OE1OE21A, 1B 2A, 2B
LL1A
1B 2A
2B
LH1A
1B Z
HLZ2A
2B
HHZZ
3 www.fairchildsemi.com
FSTD16211
Absolute Maxim um Ratings(Note 3) Recommended Operating
Conditions (Note 6)
Note 3: The Absolute Maximum Ratings are those value s beyond whic h
the saf ety of the device cannot b e guaranteed . The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The R ecomm ended O peratin g Con ditions table will defin e the condition s
for actu al device operation.
Note 4: VS is the voltage observed/applied at either A or B Ports across the
switch.
Note 5: The input and output negative voltage ratings may be exceeded if
the in put and output diode cu rrent rati ngs are obser v ed.
Note 6: Unused cont rol input s must be he ld HIG H or L OW. They ma y not
float.
DC Electrical Characteristics
Note 7: Typical values are at VCC
5.0V an d T A
25
q
C
Note 8: Measured by t he v oltage drop b et w een A and B pins at the ind ic at ed current through the sw it c h. On Resistanc e is determined by the lower of the
voltages o n t he t w o (A or B) pins.
Supply Voltage (VCC)
0.5V to
7.0V
DC Switch Voltage (VS) (Note 4)
0.5V to
7.0V
DC Input Control Pin Voltage (VIN)(Note 5)
0.5V to
7.0V
DC Input Diode Current (lIK) VIN
0V
50 mA
DC Output (IOUT) 128 mA
DC VCC/GND Current (ICC/IGND)
/
100 mA
Storage Temperature Range (TSTG)
65
q
C to
150
q
C
Power Su pply Ope rat i ng (V CC) 4.5V to 5.5V
Input Voltage (VIN) 0V to 5.5V
Output Voltage (VOUT) 0V to 5.5V
Input Rise and Fall Time (tr, tf)
Switch Control Input 0 ns/V to 5 ns/V
Switch I/O 0 ns/V to DC
Free Air Operating Temperature (TA)-40
q
C to
85
q
C
Symbol Parameter VCC TA
40
q
C to
85
q
CUnits Conditions
(V) Min Typ
(Note 7) Max
VIK Clamp Diode Voltage 4.5
1.2 V IIN
18 mA
VIH HIGH Level Input V olt age 4.55.5 2.0 V
VIL LOW Level Input Voltage 4.55.5 0.8 V
VOH HIGH Level 4.55.5 See Figure 3 V
IIInput Leakage Cu rrent 5.5
r
1.0
P
A0
d
VIN
d
5.5V
010
P
AV
IN
5.5V
IOZ OFF-STAT E Leakag e Current 5.5
r
1.0
P
A0
d
A, B
d
VCC
RON Switch On Resistance 4.5 4 7
:
VIN
0V, IIN
64 mA
(Note 8) 4.5 4 7
:
VIN
0V, IIN
30 mA
4.5 35 50
:
VIN
2.4V, IIN
15 mA
ICC Quiescent Supply Current 5.5 1.5 mA OE1
OE2
GND
VIN
VCC or GND, IOUT
0
10
P
AOE
1
OE2
VCC
VIN
VCC or GND, IOUT
0
ICCT Increase in ICC per Control Input 5.5 2.5 mA One Control Input at 3.4V
Other Control Inputs at VCC or GND
www.fairchildsemi.com 4
FSTD16211
AC Electrical Characteristics
Note 9: This parameter is guaranteed by design but is not tested. The bus swi tch contributes no propagatio n delay other tha n t he R C delay of t he typical On
Resis tance of the swit c h and the 50p F load capacitance, when driv en by an ide al v olt age source (zero output im pedance ).
Cap acitance (Note 10)
Note 10: TA
25
q
C, f
1 MHz, C apacitance is ch aracterize d but not teste d.
AC Loading and Waveforms
Note: Input drive n by 50
:
source terminated in 50
:
Note: CL includes load and stray capacitance
Note: Input PRR
1.0 MHz , tW
500 ns
FIGURE 1. AC Test Circuit
FIGURE 2. AC Waveforms
Symbol Parameter
TA
40
q
C to
85
q
C,
Units Conditions
CL
50pF, RU
RD
500
:
Figure
VCC
4.5 – 5.5V Number
Min Max
tPHL, tPLH Propagation Delay Bus to Bus (Note 9) 0.25 ns VI
OPEN Figures
1, 2
tPZH, tPZL Output Enable Time 1.5 5.5 ns VI
7V for tPZL Figures
1, 2
VI
OPEN for tPZH
tPHZ, tPLZ Output Disable Time 1.5 6.5 ns VI
7V for tPLZ Figures
1, 2
VI
OPEN for tPHZ
Symbol Parameter Typ Max Units Conditions
CIN Control Pin Input Capacitance 3.5 pF VCC
5.0V
CI/O Input/Output Capacitance 5.5 pF VCC, OE
5.0V
5 www.fairchildsemi.com
FSTD16211
Output Voltage HIGH vs. Supply Voltage
FIGURE 3.
www.fairchildsemi.com 6
FSTD16211
Physical Dimensions inches (millimeters) unless otherwise noted
54-Ball Fine-Pitch Ball Grid Array (FBGA), JEDEC MO-205, 5.5mm Wide
Packag e Num b er BGA5 4A
Physical Dim ensions inches (millimeters) unless otherwise noted (Continued)
7 www.fairchildsemi.com
FSTD16211 24-Bit Bus Switch with Level Shifting
Physical Dim ensions inches (millimeters) unless otherwise noted (Continued)
56-Lea d Th in S hri nk Sm all Ou tlin e Pack age (TSSOP), JED EC MO-1 53, 6.1mm Wide
Package Number MTD56
Technology Description
The Fairchild Switch family derives fr om and embodies Fairchilds proven switch technology used fo r several years in its
74LVX3L384 (FST3384) bus switch product.
Fairchild does not assum e any responsibility for use of any circuitry described, no circuit patent lice nses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life suppor t de vices o r syst ems are dev ic es or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instruct ions fo r use provided in the labe li ng, can be re a-
sonably expected to result in a significant injury to the
user.
2. A crit ical com ponen t in any com ponen t of a life s uppor t
device or system whose failure to perform can be rea-
sonabl y e xpec ted to cause the fa i lure of the life supp or t
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC