RO3118D * * * * Ideal for 318 MHz Automotive-Keyless-Entry Transmitters Very Low Series Resistance Quartz Stability Complies with Directive 2002/95/EC (RoHS) Pb 318.0 MHz SAW Resonator The RO3118D is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount, ceramic case. It provides reliable, fundamental-mode, quartz frequency stabilization of local oscillators operating at approximately 318 MHz. Absolute Maximum Ratings Rating Value Units Input Power Level 0 dBm DC Voltage 12 VDC -40 to +85 C 260 C Storage Temperature Soldering Temperature (10 seconds / 5 cycles max.) SM3838-6 Case 3.8 X 3.8 Electrical Characteristics Characteristic Frequency (+25 C) Sym fC Absolute Frequency Insertion Loss Quality Factor Temperature Stability Frequency Aging 2, 3, 4, 5 fC Tolerance from 318.0 MHz IL Unloaded Q QU 50W Loaded Q QL Turnover Temperature TO Turnover Frequency fO 1.4 25 Units 318.075 MHz 75 kHz 2.0 dB 40 C fC 6, 7, 8 Absolute Value during the First Year |fA| 0.032 1, 6 5 10 1.0 RM Motional Inductance LM Motional Capacitance CM Shunt Static Capacitance CO LTEST 5, 7, 9 ppm/C2 ppm/yr M 16 101 H 2.4 fF 5, 6, 9 2.8 pF 2, 7 86 nH Lid Symbolization Standard Reel Quantity Maximum 1800 10 FTC Motional Resistance Typical 317.925 12900 Frequency Temperature Coefficient Test Fixture Shunt Inductance Minimum 2, 5, 6 DC Insulation Resistance between Any Two Terminals RF Equivalent RLC Model Notes 716 // YWWS Reel Size 7 Inch 500 Pieces / Reel Reel Size 13 Inch 3000 Pieces / Reel CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. Frequency aging is the change in fC with time and is specified at +65C or less. Aging may exceed the specification for prolonged temperatures above +65C. Typically, aging is greatest the first year after manufacture, decreasing in subsequent years. The center frequency, fC, is measured at the minimum insertion loss point, ILMIN, with the resonator in the 50 test system (VSWR 1.2:1). The shunt inductance, LTEST, is tuned for parallel resonance with CO at fC. Typically, fOSCILLATOR or fTRANSMITTER is approximately equal to the resonator fC. One or more of the following United States patents apply: 4,454,488 and 4,616,197. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. Unless noted otherwise, case temperature TC = +25C2C. www.RFM.com E-mail: info@rfm.com (c)2008 by RF Monolithics, Inc. 6. 7. 8. 9. The design, manufacturing process, and specifications of this device are subject to change without notice. Derived mathematically from one or more of the following directly measured parameters: fC, IL, 3 dB bandwidth, fC versus TC, and CO. Turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fO. The nominal frequency at any case temperature, TC, may be calculated from: f = fO [1 - FTC (TO -TC)2]. Typically oscillator TO is approximately equal to the specified resonator TO. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance CO is the static (nonmotional) capacitance between the two terminals measured at low frequency (10 MHz) with a capacitance meter. The measurement includes parasitic capacitance with "NC" pads unconnected. Case parasitic capacitance is approximately 0.05 pF. Transducer parallel capacitance can by calculated as: CP CO - 0.05 pF. Page 1 of 2 RO3118D - 3/27/08 Power Test Electrical Connections Pin The SAW resonator is bidirectional and may be installed with either orientation. The two terminals are interchangeable and unnumbered. The callout NC indicates no internal connection. The NC pads assist with mechanical positioning and stability. External grounding of the NC pads is recommended to help reduce parasitic capacitance in the circuit. Connection 1 NC 2 Terminal 3 NC 4 NC 5 Terminal 6 NC 50 Source at F C P INCIDENT Low-Loss Matching Network to 50 P REFLECTED 1 6 2 3 5 4 Typical Application Circuits B C 1 G H Typical Low-Power Transmitter Application 6 6 A 2 5 E 1 5 2 4 3 200k I +9VDC Modulation Input C1 47 L1 (Antenna) 3 4 1 D J 6 2 3 5 4 C2 ROXXXXC Bottom View RF Bypass 470 Case Dimensions mm Dimension A B C D E G H I J Typical Local Oscillator Application Output 200k Inches +VDC Min Nom Max Min Nom Max 3.60 3.60 1.00 0.95 2.39 0.90 1.90 0.50 1.70 3.80 3.80 1.20 1.10 2.54 1.0 2.0 0.6 1.8 4.0 4.0 1.40 1.25 2.69 1.10 2.10 0.70 1.90 0.14 0.14 0.04 0.033 0.090 0.035 0.75 0.020 0.067 0.15 0.15 0.05 0.043 0.10 0.04 0.08 0.024 0.07 0.16 0.16 0.055 0.05 0.110 0.043 0.83 0.028 0.075 C1 +VDC L1 1 6 2 3 5 4 C2 ROXXXXC Bottom View RF Bypass Equivalent LC Model 0.05 pF* Typical Test Circuit Co = Cp + 0.05 pF The test circuit inductor, LTEST, is tuned to resonate with the static capacitance, CO, at FC. Cp Electrical Test Rm Lm *Case Parasitics Cm Temperature Characteristics The curve shown on the right accounts for resonator contribution only and does not include LC component temperature contributions. fC = f O , T C = T O 6 0 1 5 2 4 3 To 50 Network Analyzer 0 -50 -50 -100 -100 -150 -150 (f-fo ) / fo (ppm) From 50 Network Analyzer -200 -80 -60 -40 -20 -200 0 +20 +40 +60 +80 T = T C - T O ( C ) www.RFM.com E-mail: info@rfm.com (c)2008 by RF Monolithics, Inc. Page 2 of 2 RO3118D - 3/27/08