ES1A - ES1G Green 1.0A SURFACE MOUNT SUPER-FAST RECTIFIER Please click here to visit our online spice models database. Features Mechanical Data * * * * * * * * * Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Surge Overload Rating to 30A Peak Ideally Suited for Automated Assembly Lead Free Finish/RoHS Compliant (Note 1) Green Molding Compound (No Halogen and Antimony) (Note 2) Qualified to AEC-Q101 Standards for High Reliability * * * * * * Bottom View Top View Maximum Ratings Case: SMA Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Lead Free Plating (Matte Tin Finish) Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.064 grams (approximate) @TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Average Rectified Output Current @ TT = 110C Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VR VR(RMS) IO ES1A ES1B ES1C ES1D ES1G Unit 50 100 150 200 400 V 35 70 105 1.0 140 280 V A IFSM 30 A Symbol RJT TJ, TSTG Value 25 -55 to +150 Unit C/W C Thermal Characteristics Characteristic Typical Thermal Resistance, Junction to Terminal (Note 5) Operating and Storage Temperature Range Electrical Characteristics Characteristic Maximum Forward Voltage Drop @TA = 25C unless otherwise specified Symbol @ IF = 0.6A @ IF = 1.0A Peak Reverse Current @ TA = 25C at Rated DC Blocking Voltage (Note 6) @ TA = 125C Maximum Reverse Recovery Time (Note 3) Typical Total Capacitance (Note 4) Notes: ES1A VFM IRM trr CT ES1B ES1C 0.90 0.92 5.0 200 25 10 ES1D ES1G 1.25 Unit V A ns pF 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/quality/lead_free.html. 2. Product manufactured with Data Code 0924 (week 24, 2009) and newer are built with Green Molding Compound. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. 4. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 5. Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pad as heat sink. 6. Short duration pulse test used to minimize self-heating effect. ES1A - ES1G Document number: DS14001 Rev. 14 - 2 1 of 4 www.diodes.com September 2009 (c) Diodes Incorporated ES1A - ES1G IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 1.5 Note 5 1.0 0.5 0 25 50 75 100 125 150 TT, TERMINAL TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve 175 Single Half-Sine-Wave 20 10 0 1 1.0 0.1 0.01 0 0.4 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1,000 IR, INSTANTANEOUS REVERSE CURRENT (A) IFSM, PEAK FORWARD SURGE CURRENT (A) 30 10 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Surge Current Derating Curve ES1A - ES1G Document number: DS14001 Rev. 14 - 2 100 100 2 of 4 www.diodes.com Tj = 100C 10 1.0 Tj = 25C 0.1 20 60 100 0 40 80 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics September 2009 (c) Diodes Incorporated ES1A - ES1G Ordering Information (Note 7) Part Number ES1x-13-F Case SMA Packaging 5000/Tape & Reel * x = Device type, e.g. ES1A-13-F Notes: 7. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YWW ES1x ES1x = Product type marking code, ex. ES1A = Manufacturer's code marking YWW = Date code marking Y = Last digit of year (ex: 2 for 2002) WW = Week code 01 to 52 Package Outline Dimensions B A C D J SMA Dim Min Max A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D 0.15 0.31 E 4.80 5.59 G 0.05 0.20 H 0.76 1.52 J 2.01 2.30 All Dimensions in mm G H E Suggested Pad Layout C Dimensions Value (in mm) Z 6.5 G 1.5 X 1.7 Y 2.5 C 4.0 X Y G Z ES1A - ES1G Document number: DS14001 Rev. 14 - 2 3 of 4 www.diodes.com September 2009 (c) Diodes Incorporated ES1A - ES1G IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2009, Diodes Incorporated www.diodes.com ES1A - ES1G Document number: DS14001 Rev. 14 - 2 4 of 4 www.diodes.com September 2009 (c) Diodes Incorporated