AC Fan 120x120x25 mm San Ace 120 Only standard fans (without sensors) have acquired CSA certification. General Specifications Material ................................................ Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1) Expected life .......................................... See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60C, rated voltage) Motor structure .................................... Shaded coil motor Motor protection function ..................... Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 529. Dielectric strength ................................. 50/60 Hz, 1500 VAC, for 1 minute (between input terminal and frame) Dielectric strength (with sensor) ......... Between AC input and DC input (Sensor output): 50/60 Hz 1000 VAC 1 minute Insulation resistance.............................. Sound pressure level (SPL) .................. Operating voltage range ..................... Storage temperature ........................... Sensor-Purpose lead wire ..................... Between AC input and G: 50/60 Hz 1500 VAC 1 minute Between G and DC input (Sensor output): 50/60 Hz 1000 VAC 1 minute 10 M or more with a 500 VDC megger At 1 m away from the air inlet Voltage of each model 10% -30 to +70C (Non-condensing) Brown Black Sensor Yellow Mass ...................................................... 370 g/390 g (with Sensor) Specifications Standard Model no. 109S085 109S084 109S088 109S087 109S081 109S083 109S082 109S089 109S086* Rated voltage [V] 100 115 200 230 100 115 200 230 100 Frequency [Hz] 50/60 Input [W] Current [A] 0.16/0.14 0.14/0.12 13.5/12 0.08/0.07 0.07/0.06 0.11 0.1 9.5/8.5 0.07 0.06 12/10 0.14/0.12 Locked rotor current Rated speed [A] [min-1] Max. airflow [m/min] [CFM] 0.19/0.17 0.16/0.15 2500/2900 1.95/2.3 68.9/81.3 0.1 /0.09 0.08/0.07 0.11/0.1 0.1 /0.09 2200/2350 1.7 /1.8 60.1/63.6 0.07/0.06 0.06/0.05 0.15/0.13 1400/1600 1.1 /1.25 38.9/44.2 Max. static pressure SPL [Pa] [inchHO] [dB (A)] 48 /51.9 0.193/0.216 38/41 29.4/26.5 0.118/0.106 34/35 14.7/18.6 0.059/0.075 24/27 Operating temperature Expected life -30 to +60 25000/60C [C] [h] * These are low-speed models. with Sensor For sensor specifications, please refer to p. 531. Sensor specification differs depending on the fan's speed specification. For a 5 V sensor power supply (ITEM-20), please append "-20" to the end of model number. E.g. 109S485-20 For a 12 V sensor power supply (ITEM-30), please append "-30" to the end of model number. E.g. 109S485-30 Model no. 109S485 109S484 109S488 109S487 109S486* Rated voltage [V] 100 115 200 230 100 Frequency [Hz] 50/60 * These are low-speed models. 482 Input [W] Current [A] 0.16/0.14 0.14/0.12 13.5/12 0.08/0.07 0.07/0.06 12/10 0.14/0.12 Locked rotor current Rated speed [A] [min-1] Max. airflow [m/min] [CFM] 0.19/0.17 0.16/0.15 2500/2900 1.95/2.3 68.9/81.3 0.1 /0.09 0.08/0.07 0.15/0.13 1400/1600 1.1 /1.25 38.9/44.2 Max. static pressure SPL [Pa] [inchHO] [dB (A)] 48 /51.9 0.193/0.216 38/41 14.7/18.6 0.059/0.075 24/27 Operating temperature Expected life -10 to +60 25000/60C [C] [h] Set Models Fan, finger guard, plug cord, screws, etc. can be purchased in one package. For details, please refer to p. 574. Set items Order no. Fan 109S085 109S084 109S088 109S087 109S081 109S083 109S082 109S089 109S086 109S485-20 109S485-30 109S484-20 109S484-30 109S488-20 109S488-30 109S487-20 109S487-30 109S486-20 109S486-30 ST1-109S085 ST1-109S084 ST1-109S088 ST1-109S087 ST1-109S081 ST1-109S083 ST1-109S082 ST1-109S089 ST1-109S086 ST1-109S485-20 ST1-109S485-30 ST1-109S484-20 ST1-109S484-30 ST1-109S488-20 ST1-109S488-30 ST1-109S487-20 ST1-109S487-30 ST1-109S486-20 ST1-109S486-30 Voltage Low-speed sensor Plug cord 100 V 115 V 200 V 230 V 100 V 115 V 200 V 230 V (5 V) (12 V) (5 V) (12 V) (5 V) (12 V) (5 V) (12 V) (5 V) (12 V) 100 V 115 V 200 V 230 V 100 V Finger guards 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 489-016-L10 Mounting screws 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E 109-019E M3x40 mm (4 screws) Airflow - Static Pressure Characteristics Standard (inch H2O) (Pa) (inch H2O) (Pa) 50 0.15 0.10 0.05 0 30 60 Hz 100 V/115 V/200 V/230 V 50 Hz 100 V/115 V/200 V/230 V 40 30 20 60 Hz 100 V/115 V/200 V/230 V 0.10 50 Hz 100 V/115 V/200 V/230 V 20 0.05 10 30 0.10 0.08 60 Hz 100 V 20 50 Hz 100 V 0.06 0.04 10 0.02 10 0 1 0 20 2 40 60 Airflow 3 80 100 0 (m3/min) 0 1 0 (CFM) 20 2 40 60 Airflow 3 (m3/min) 80 100 0 0 1 0 (CFM) 20 40 2 60 Airflow AC Fan 120 mm sq. 60 0.20 0.12 Static pressure 0.25 109S086 (inch H2O) (Pa) 0.15 70 Static pressure Static pressure 0.30 109S081, 109S083, 109S082, 109S089 AC 109S085, 109S084, 109S088, 109S087 (m3/min) 80 (CFM) with Sensor 109S485, 109S484, 109S488, 109S487 (inch H2O) (Pa) (inch H2O) (Pa) 70 0.25 60 0.20 50 0.15 0.10 0.05 0 0.12 60 Hz 100 V/115 V/200 V/230 V 50 Hz 100 V/115 V/200 V/230 V 40 30 20 Static pressure Static pressure 0.30 109S486 30 0.10 0.08 60 Hz 100 V 20 50 Hz 100 V 0.06 0.04 10 0.02 10 0 1 0 20 40 2 60 Airflow 3 80 100 (m3/min) (CFM) 0 0 1 0 20 40 2 60 Airflow (m3/min) 80 100 (CFM) 483 Dimensions (unit: mm) Standard 8-o3.7 Mounting hole 1190.5 104.80.5 M4 6 mm deep M4xx0.7, 0.76 Earth ground tap 104.80.5 3.5 3.5 250.5 1190.5 26 max. 26 Airflow direction Rotating direction with Sensor M4 6 mm deep 0.76 M4xx0.7, Earth ground tap 79 1190.5 104.80.3 9.5 9.5 1.5 1.5 When mounting the model with a sensor, please screw-mount through both flanges as it has a sensor box. Sensor-purpose lead wire Length 300L 300L AWG28 8-o3.7 UL 1007 Mounting hole 41 3.5 104.80.3 1190.5 3.5 25.30.5 26 max. Airflow direction Rotating direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 484 104.80.3 4-o4 115 104.80.3 27 4-o4 o1 115 104.80.3 o1 17 104.80.3 Wiring Diagram Standard For fan power supply AC power supply AC FAN For sensor circuit 5 V (ITEM-20) 12 V (ITEM-30) Brown Brown +4.5 to 5.5 V 100 mA max. Yellow +27.6 V max. Pull-up resistor Black Sensor output GND (0 V) Sensor circuit with Sensor Sensor circuit AC power supply AC FAN +9.6 to 14.4 V Yellow 200 mA max. +27.6 V max. Pull-up resistor Black Sensor output GND (0 V) GND (Black) should be shared in case that power supply for sensor circuit (Brown) and that for sensor pull-up (Yellow) are separated. Options Resin finger guards Model no.: 109-019C, 109-019H, 109-019E, 109-019K Model no.: 109-1000G Resin filter kits Plug cord page: p. 521 Model no.: 109-1000F13 (13PPI), 109-1000F20 (20PPI), 109-1000F30 (30PPI), 109-1000F40 (40PPI) page: p. 520 page: pp. 523 to 524 Model no.: 489-016-L10, 489-016-L21, 489-047-L10, 489-047-L21 AC page: p. 514 AC Fan 120 mm sq. Finger guards 485 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Sanyo Denki: 109S084 109S085 109S089 109S087 109S081 109S083 109S082 109S086 109S088