CA-COM Industrial Connectors ITT Inc. ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial markets. Building on its heritage of innovation, ITT partners with its customers to deliver enduring solutions to the key industries that underpin our modern way of life. Founded in 1920, ITT is headquartered in White Plains, N. Y., with employees in more than 35 countries and sales in a total of approximately 125 countries. For more information, visit www.itt.com. Our connector portfolio remains the most extensive in the industry, offering a reliable and cost effective range of interconnect solutions with the brands of Cannon, VEAM and BIW Connector Systems. Continuous investment in technology and research & development have enabled ITT to provide new, innovative products and solutions to markets including: 2 www.ittcannon.com lndustrial / lnstrumentation Transportation Defense Vehicles Oil & Gas Automotive Commercial & Military Aerospace Our connector portfolio remains the most extensive in the industry, offering a reliable and cost effective range of interconnect solutions Computer, Telecom & Consumer Electronics www.ittcannon.com 3 Introduction to CA-COM ITT Cannon's circular connector's series CA-COM and CA-COM-B are derivations of the connectors know as SAE-AS50151 (formerly MIL-DTL-5015) and VG95234. Initially designed for military aircraft and combat vehicle application the CA-COM versions have been modified especially for the utilization in various industrial areas. Connectors of both CA-COM series are intermateable and interchangeable with the corresponding types as per SAE-AS50151 and VG95234 as they offer the same mounting dimensions and contact arrangements. The entire CA-COM connector line is ROHS compliant. Features and benefits **The CA-COM standard version is featured by a threaded coupling system while the CA-COM-B types are coined by a "Reverse bayonet" coupling mechanism that offers exceptional vibration protection by a simple 120 turn. The CA-COM-B coupling unit is featured by roller bolts made of stainless steel rolling down the mating ramp, thus reducing coupling torque. **Various backshell and adapter options, like PG metric gland and heatshrink boot are available amongst others. **Insulators are made of high quality polychloroprene, which are good for temperatures up to 125. This material is self-extinguishing, resistant against various fluids like gasoline, lubricants and other fluids of such nature (short time wetting only). In case of lifetime moistening FKM insulator material can be offered as an alternative. **The contacts are made of copper alloy plated with hard silver finish good for at least 500 mating cycles. There are solder, crimp and PCB contacts in place. The crimp contacts offer a comprehensive range of termination reductions (see pages 41 and 42). **All solder contacts are ROHS compliant due to a special passivation. Contact us for detail or your request for a customized solution. Vital Information: 2D and 3 D drawings, connector specifications are available on ITT Cannon#s web page: www.ittcannon.com Please insert the full connector part number into the keyword search field. Dimensions shown in mm | Specifications and dimensions subject to change 4 www.ittcannon.com Table of contents How to use this catalogue..................................... 6 Product overview.................................................... 7 Part number creation......................................... 8 - 9 Ordering reference................................................ 10 Contact arrangements..................................... 11-15 Mounting dimensions........................................... 16 Seperating and coupling dimensions..................... 17 Wall mounting receptacles with endbells........ 18 - 21 Cable connecting plugs.................................. 22 - 25 Wall mounting receptacles............................. 26 - 29 Straight Plugs................................................. 30 - 33 Right Angle Plugs .......................................... 34 - 36 Accessories - Protective caps.......................... 37 - 38 Accessories.................................................... 39 - 40 Contacts........................................................ 41 - 42 Tooling.......................................................... 43 - 44 Product safety information.................................... 45 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 5 How to use This catalog is split in several sections that help you to ** Get an impression what this product is all about (Introduction) ** Get a general overview of all product lines (product overview) ** Get all required detail information (contact arrangements, product details) ** Get all required supporting products (accessories and tooling) The fastest way to find your product of choice is to follow these steps 1 Select your product using either the "part number creation" or the "ordering reference" option 3 Add accessories and tooling options on the related pages. A connector assembly instruction is available upon request or visit www.ittcannon.com: Enter Keyword "CA Bayonet Assembly Instruction" 2 Use the detail pages to better understand the available options like connector styles, contact arrangements and contacts options 4 Use the contact information on the back cover to contact us for further questions or to get advise on where you can purchase our products Dimensions shown in mm | Specifications and dimensions subject to change 6 www.ittcannon.com Product overview Test voltage ELECTRICAL DATA Contact Rating at 20C (68F), ambient temperature Service rating Test voltage Vrms Contact size (AWG/metric) Instruments 1050 Rated Current (A max.) 16S /15S 22 A 1600 16 /15 22 B 4500 12 41 D 2500 8/60/100 74 E 3000 4 /160 135 0 /500 245 MECHANICAL FEATURES Ambient temperature This applies only to the max. rated current for one contact. If several contacts in one contact arrangement are loaded with higher current the temperature may not exceed 125C -55/125C (- 67/257F) ENVIRONMENTAL SEALING Acc. to DIN EN 60068-1 Threaded: Up to IP 65 (in mated condition) Rated Current vs. Ambient Temperature Bayonet: Up to IP 67 (in mated condition) Mating Cycles min. 500 Min. Separating Force per Contact Contact size Separating force metric AWG 15S /15 16S /16 N min 1,0 25 12 1,5 60/100 8 3,0 160 4 4,0 500 0 8,5 Contact Retention Apply test force in mating direction Contact size Test force metric AWG N 15S /15 16S /16 35 25 12 55 60/100 8 80 160 4 90 500 0 95 Coupling Torque The admissible coupling torque has to be tested under harnessed condition Contacts Resistance (Millivolt test) Contact size (AWG/metric) Admissible torque Contact resistance Closing and opening (Nmmax) m max. CA-COM Opening (Nmmin) CA-COM-B 16S /15S 6,0 Shell size 16 /15 6,0 10SL 3,0 1,7 0,15 12/25 3,0 12S 2,8 2,5 0,23 8 /100 1,0 14S 5,9 3,6 0,35 4 /160 0,3 16S/16 7,0 5,5 0,46 0 /500 0,2 Insulation Resistance 1000 M 18 8,0 8,0 0,58 20 9,0 9,0 0,70 22 10,6 11,0 0,80 24 12,9 14,0 0,80 28 16,7 17,0 0,92 Voltage class Instr. A D 32 18,1 19,0 1,02 Air path, mm 0,7 1,1 2,8 36 23,9 23,0 1,05 Creepage path, mm 0,7 1,1 2,8 Air and Creepage Path (min.) Materials Operation Voltage As according to specification these connectors are suitable for an operating voltage of 50 Vrms (see Product safety information). However, this is only valid when the connectors are freely accessible during operation and consequently might be touchable. Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 7 Shell Aluminum alloy, Zinc die cast, nickel plated Contacts Copper alloy, silver plated Insulator /Grommet Polychloroprene Part number creation plug Follow these steps to design your connector part number. STEP 1 Select shell style (plug) Shell Style Straight Plug Plug 90 Bayonet Threaded Bayonet Threaded CA06COM-B CA06COM CA08COM-B CA08COM Class PG; ME For PG or Metric cable glands Class E General duty, strain relief STEP 2 Choose backshell Class F For Flex tube Class E Environmental, grommet seal, heat shrink boot adapter Mod. -03; -06 (bayonet), Mod. DN (threaded) STEP 3 Choose layout see page 11 -14 for layouts STEP 4 Choose gender P=pin STEP 5 Choose rotation see page 15 for rotation (omit for normal position) STEP 6 Choose modification see page 10 for modifications Class E, 90 General duty, strain relief Class F, 90 For Flex tube S=socket Design your part number as per above steps CA-COM-B Example CA-COM Example STEP 1 Shell style STEP 2 Class / Backshell STEP 3 Contact arrangement STEP 4 Contact gender STEP 5 Insulation rotation CA06COM E 20 - 27 S W STEP 1 Shell style STEP 2 Class / Backshell STEP 3 Contact arrangement STEP 4 Contact gender STEP 5 Insulation rotation CA06COM E 20 - 27 S W STEP 6 Mod code (max. 4 codes) B - 02 STEP 6 Mod code (max. 4 codes) - 01 - DN Dimensions shown in mm | Specifications and dimensions subject to change 8 www.ittcannon.com Part number creation receptacle Follow these steps to design your connector part number. STEP 1 Select shell style (receptacle) Wall Mounting Cable connecting Box Mounting Bayonet Threaded Bayonet Threaded CA00COM-B CA00COM CA01COM-B CA01COM Bayonet and Threaded (no backshell) CA02COM-BCA20COM STEP 2 Choose backshell Class F For Flex tube Class PG; ME Grommet seal with strain relief Class E General duty, strain relief STEP 3 Choose layout see page 11 -14 for layouts STEP 4 Choose gender P=pin STEP 5 Choose rotation see page 15 for rotation (omit for normal position) STEP 6 Choose modification see page 10 for modifications Class E Environmental, grommet seal, heat shrink boot adapter Mod. -03; -06 (bayonet), Mod. DN (treaded) S=socket Design your part number as per above steps CA-COM-B Example CA-COM Example STEP 1 Shell style STEP 2 Class / Backshell STEP 3 Contact arrangement STEP 4 Contact gender STEP 5 Insulation rotation CA00COM PG 18 - 1 P X STEP 1 Shell style STEP 2 Class / Backshell STEP 3 Contact arrangement STEP 4 Contact gender STEP 5 Insulation rotation CA00COM ME 22 - 23 S Y Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 9 STEP 6 Mod code (max. 4 codes) B - 01 STEP 6 Mod code (max. 4 codes) Ordering reference CA 06 COM-E 18-1 P W XX CA 06 COM-E 18-1 P W B- XX Part number explanation Series CA - Cannon Designation Shell type 00 - Wall mounting receptacle see page 18 -21 01 - cable connecting plug see page 22 -25 02 - Box mounting receptacle see page 26+28 20 - Box mounting receptacle, rear mounting see page 27+29 06 - Plug, straight see page 30 -33 08 - Plug, 90 see page 34 -36 Class COM-E - Endbell with cable clamp COM-F - Endbell for flex tube COM-PG - Adapter for PG-termination COM-ME - Adapter for Metric-termination COM-L - PCB solder termination Shell size 10SL, 12S, 14S, 16, 16S, 18, 20, 22, 24, 28, 32, 36 Contact arrangement see page 11 -15 Contact type P - pin S - socket Alternate insert position see page 14 Insulator rotation Coupling B- Bayonet coupling (without designation = threaded coupling) Modification 01 - Metric crimp contacts 03 - Adapter for heat shrink boots and metric crimp contacts (bayonet coupling only) 06 - Adapter for heat shrink boots and solder pot contacts (bayonet coupling only) 44 - With endring and grommet (individual wire sealing, Class E and F only) 48 - F endbell with O-Ring BM29 - Threaded flange holes, shell styles 02, 20 and 00 (threaded coupling only) DN - Adapter for heat shrink boots (threaded coupling only) F42 - Less backshell / grommet F0 - Without contacts (to be ordered separately) except shell style 02 / 20 Dimensions shown in mm | Specifications and dimensions subject to change 10 www.ittcannon.com CONTACT ARRANGEMENTS Figure No. of contacts Contact arrangements Service rating Contact size Y Z 3 10SL-3 15S A - - - - 2 10SL-4 15S A - - - - 4 12SA-10 15S A - - - - 3 14S-1 15S A - - - - 4 14S-2 15S Inst. - 120 240 - 5 14S-5 15S Inst. - 110 - - 6 14S-6 15S Inst. - - - - 3 14S-7 15S A 90 180 270 - 7 14SA7 15S Inst. - - - - 7 16S-1 15S A 80 - - 280 5 16S-8 15S A - 170 265 - 2 1 16-7 15 (A, B) 8 (C) A 80 110 250 280 2 2 16-9 15 (B, D) 25 (A, C) A 35 110 250 325 3 4 3 16-10 25 A 90 180 270 - 1 16-12 4 A 0 - - - 10 18-1 15 A (B,C,F,G) Inst. (all other) 70 145 - 290 4 18-4 15 D 35 110 250 325 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com Insulator position W X 11 CONTACT ARRANGEMENTS Figure No. of contacts 7 5 2 Contact arrangements Service rating Contact size Insulator position W X 18-9 15 (B, C, E - G) 25 (A, D) Inst. 80 Y Z 110 250 280 4 18-10 25 A - 120 240 - 5 18-11 25 A - 170 265 - A 80 110 250 280 4 3 1 18-13 25 (B, C) 8 (A) 1 20-2 0 D - - - - 4 20-4 25 D 45 110 250 - 8 20-7 15 A (C-F) D (A, B, G, H) 80 110 250 280 Inst. 80 110 250 280 D (J) A (all other) - 110 250 - 6 4 2 20-8 15 (B, C, E, F) 8 (A, D) 9 20A9 25 19 20A48 15 Inst. - 80 280 - 7 20-15 25 A 80 - - 280 A 80 110 250 280 9 7 2 20-16 15 (A - G) 25 (H, I) 3 20-19 8 A 90 180 270 - 14 20-27 15 A 35 110 250 325 17 20-29 15 A 80 - - 280 11 20-33 15 A - - - - D 80 110 250 280 5 3 2 22-12 15 (A, C, D) 8 (B, E) Dimensions shown in mm | Specifications and dimensions subject to change 12 www.ittcannon.com CONTACT ARRANGEMENTS Figure No. of contacts Contact arrangements Service rating Contact size Insulator position W X Y Z 19 22-14 15 A 80 - - 280 14 22-19 15 A 80 110 250 280 4 22-22 8 A - 110 250 - 8 22-23 25 D (H) A (all other) 35 - 250 - 7 24-2 25 D 80 - - 280 Inst. 80 110 250 280 A 80 - - 280 16 14 2 24-7 15 (A-M,O) 25 (P,N) 24-10 8 7 6 3 24-11 25 (A - C, G - I) 8 (D. F) A 35 110 250 325 9 2 24-20 15 (A - D, G L) 25 (E, F) A 80 110 250 280 9 11 4 24-22 8 D 45 110 250 - 24 24-28 15 Inst. 80 110 250 280 A 80 110 250 280 22 18 4 28-11 15 (A - I, N - X) 25 (J - M) 26 28-12 15 A 90 180 270 - 35 28-15 15 A 80 110 250 280 A 80 110 250 280 A 80 110 250 280 Inst. - - - - 14 4 10 28-20 15 (K - N) 25 (A - J, P) 28-21 15 37 9 5 4 28A16 16 4 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com Special insulator position 13 2 4 9 12 260 110 250 280 CONTACT ARRANGEMENTS Figure No. of contacts Contact arrangements Service rating Contact size 19 9 28A63 15 25 3 2 32-1 12 (A, C, D) 0 (B, E) 28 5 32-5 0 2 Insulator position W X Y Z A (e) Inst. (all other) - - - - E (A) D (all other) 80 110 250 280 D 35 110 250 325 A 80 110 250 280 Inst. (A, B, h, i) A (all other) 80 125 235 280 16 2 3 2 32-6 15 (A - D, S) 25 (U, V) 8 (P - T) 4 (W, X) 28 7 32-7 15 (A - N, W, Z, a, k) 25 (O - V) 55 32A55 15 A 80 110 250 280 32-17 4 D 45 110 250 - Inst. - 110 250 - 36-5 0 A - 120 240 - 36-10 15 A 80 125 235 280 23 35 55 4 61 41 20 4 48 32A69 20 15 ALTERNATE INSERT POSITION Normal Position: 0 Indicates location of centerline of key or keyway of shells in fixed normal position. Insert is rotated as shown by arrow and letters. Tolerances: Pin insulator 10SL-20: 2,0 Pin insulator 22-36: 1,5 Pin mating face Socket mating face Dimensions shown in mm | Specifications and dimensions subject to change 14 www.ittcannon.com CONTACT ARRANGEMENTS Contact count per contact arrangement On pages 11-14 the contact arrangements are shown by shell sizes. The table below gives an overview on the number of contacts, contact size and per contact arrangement. Contact No. of Arrangement Contacts 10 16-12 1 20-2 1 10SL-4 2 32-5 2 10SL-3 3 Contact Arrangement Contact Size 15S 15 25 8 4 No. of Contacts 0 Contact Size 10 1 1 2 15S 15 20A9 9 20-16 9 24-11 9 28A16 9 5 10 10 7 3 3 20-33 11 11 3 3 24-20 11 9 16-7 3 2 16-10 3 20-19 3 12SA10 4 4 14S-2 4 4 16-9 4 2 18-4 4 4 18-10 4 3 3 4 3 4 22-22 4 4 24-22 4 4 32-17 4 36-5 4 5 5 5 5 6 6 5 3 4 7 7 7 7 2 18-9 7 20-15 7 7 7 7 7 20-7 8 22-23 8 2 6 14SA7 24-2 5 2 28-20 14 4 10 24-7 16 14 2 20-29 17 17 20A48 19 19 22-14 19 19 28-11 22 18 4 32-6 23 16 2 24-28 24 24 28-12 26 26 28A63 28 19 28-15 35 35 32-7 35 28 28-21 37 37 36-10 48 48 32A55 55 55 32A69 61 7 8 8 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 14 14 2 3 16S-1 24-10 1 4 14S-5 14S-6 14 14 4 16S-8 20-8 20-27 22-19 4 4 5 2 2 18-13 32-1 4 1 20-4 5 3 3 14S-1 5 4 2 6 14S-7 18-11 8 9 2 18-1 22-12 25 15 41 20 9 7 3 2 0 MOUNTING HOLES Shell size CA-COM Threaded d1 H12 d1 H12 CA00... , CA20... CA-COM-Bayonet d2H13 e d1 H12 CA02... d1 H12 CA00... , CA20... d2 H13 CA02... 10SL 16,0 16,4 3,4 18,2 19,1 17,0 3,4 12S 19,1 16,4 3,4 20,6 22,0 17,0 3,4 14S 22,3 19,7 3,4 23,0 25,5 20,0 3,4 16S /16 25,5 22,9 3,4 24,6 28,3 23,0 3,4 18 28,7 26,1 3,4 27,0 31,7 26,5 3,4 20 31,8 29,5 3,4 29,4 35,0 30,0 3,4 22 35,0 32,7 3,4 31,8 38,3 33,0 3,4 24 38,2 36,0 3,9 34,9 41,8 36,0 3,9 28 44,5 42,0 3,9 39,7 47,6 42,0 3,9 32 50,9 48,3 4,5 44,5 54,3 48,5 4,5 36 57,2 53,1 4,5 49,2 60,5 55,0 4,5 Mounting holes for connectors styles, complete receptacle range HARNESSING WIRE STRIPPING CA-COM connectors are designed for single wire harnessing, if an individual wire sealing grommet is used. Wires have to conform to wire and insulation diameters with the data given in the following table: Either mechanical or hot stripping can be used. Prevent conductors or insulators damage. For solder contacts, conductors have to be pretinned. Contact size AWG Crimp / solder contacts metric AWG mm metric Note: Do not twist conductors used with crimp contacts. Do not touch uninsulated conductors before crimping, twisting of conductors and grease or lubricants on the wires cause poor crimp quality. Insulation O AWG mm Contact size Stripping length metric AWG metric mm mm - 10 4,0 + 0,4 6,0 + 0,5 - 10 - 0,75-1,0 - 1,45-2,5 16S/15S 16/15 16S /15S 16/15 16 0,75-1,5 1,6-2,8 1,60-2,8 12 25 6,0 + 0,5 12 25 12 2,5 2,9-3,5 2,9-3,5 8 60/100 11,0 + 0,8 - 0,4 160 500 13,0 + 0,8 - 0,4 - 60 - 6,0 - 3,5-4,9 4 8 100 8 10,0 4,2-5,8 5,5-6,5 0 4 160 4 16,0 6,2-9,0 7,1-9,0 0 500 0 50,0 10,5-13,0 10,5-13,0 11,0 + 0,8 - 0,4 WIRING HINTS Strip wires carefully. Do not damage conductors and insulation. For solder connections, wires have to be pretinned. Do not twist conductors used in crimp contacts, otherwise no perfect crimp connection will be achieved. Do not touch conductors before crimping. Film of grease or lubricants on the strands will cause poor crimp quality. For detailled assembly instructions please visit www.ittcannon.com and search for the keyword "CA Bayonet Assembly Instruction". Dimensions shown in mm | Specifications and dimensions subject to change 16 www.ittcannon.com SEPARATING AND COUPLING DIMENSIONS PLUG CA06COM-E CA06COM-E-B CA06COM-E-DN CA06COM-E-B-03/-06 RECEPTACLE CA02COM-E CA02COM-E-B PLUG CA06COM-F CA06COM-F-B CA06COM-PG CA06COM-PG-B RECEPTACLE CA02COM-E CA02COM-E-B PLUG CA08COM-E CA08COM-E-B CA06COM-E-DN CA006COM-E-B RECEPTACLE CA02COM-E CA20COM-E CA02COM-E-B CA20COM-E-B Shell size l1 min l2 min l3 min l4 min l5 min l6 min l7 max l8 max 10SL 70 70 65 80 70 65 3,5 8,0 12S 70 75 65 80 75 70 3,5 8,0 14S 70 75 65 80 75 80 3,5 8,0 16S 70 90 65 80 80 80 3,5 8,0 16 80 100 70 100 90 100 3,5 8,0 18 90 100 70 110 95 110 3,5 8,0 20 90 100 70 110 95 110 3,5 8,0 22 90 100 70 110 95 110 3,5 8,0 24 110 120 90 120 105 120 5,0 8,0 28 110 120 90 120 105 120 5,0 9,0 32 110 180 90 120 115 120 6,0 9,0 36 110 190 100 130 120 130 6,0 9,0 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 17 WALL MOUNTING RECEPTACLE CLASS PG OR ME CA00COM-PG-B with bayonet coupling, CA00COM-ME-B CA00COM-PG / ME-B is a wall mounting receptacle for usage of PG or Metric glands. It mates with plugs CA06COM-B and CA08COM-B Part No. (pin insert*) d1 - 0,15 d2 PG-Thread Metric d3 Thread l1 max l2 + 0,4 l3 + 0,2 I4 0,3 e 0,1 CA00COM-PG10SL-*P-B-*** CA00COM-ME10SL-**P-B-*** 18,2 PG9 M16 x 1,5 M4 56 18,20 2,8 25,4 18,2 CA00COM-PG12S-**P-B-*** CA00COM-ME12S-**P-B-*** 21,4 PG9 M16 x 1,5 M4 56 18,20 3,2 28,0 20,6 CA00COM-PG14S-**P-B-*** CA00COM-ME14S-**P-B-*** 24,6 PG11 M20 x 1,5 M4 56 18,20 3,2 30,0 23,0 CA00COM-PG16S-*P-B-*** 27,4 PG13,5 M20 x 1,5 M4 58 18,20 3,2 32,5 24,6 CA00COM-ME16S-**P-B-*** CA00COM-PG16-**P-B-*** CA00COM-ME16-**P-B-*** 27,4 PG13,5 M20 x 1,5 M4 66 23,05 3,2 32,5 24,6 CA00COM-PG18-**P-B-*** CA00COM-ME18-**P-B-*** 30,8 PG13,5 M25 x 1,5 M4 73 23,05 4,0 35,0 27,0 CA00COM-PG20-**P-B-*** CA00COM-ME20-**P-B-*** 34,2 PG16 M25 x 1,5 M4 74, 23,05 4,0 38,0 29,4 CA00COM-PG22-**P-B-*** CA00COM-ME22-**P-B-*** 37,4 PG16 M32 x 1,5 M4 77 23,05 4,0 41,0 31,8 CA00COM-PG24-**P-B-*** CA00COM-ME24-**P-B-*** 40,9 PG16 M32 x 1,5 M4 77 23,05 4,0 44,5 34,9 CA00COM-PG28-**P-B-*** CA00COM-ME28-**P-B-*** 46,7 PG21 M32 x 1,5 M5 78 24,05 4,0 50,8 39,7 CA00COM-PG32-**P-B-*** CA00COM-PG36-**P-B-*** CA00COM-ME32-**P-B-*** CA00COM-ME36-**P-B-*** 53,4 59,6 PG29 PG29 M40 x 1,5 M40 x 1,5 M5 M5 78 89 24,05 24,05 4,0 4,0 57,0 63,5 44,5 49,2 l2 + 0,4 l3 0,3 I4 0,3 e 0,1 CA00COM-PG with threaded coupling, CA00COM-ME CA00COM-PG / ME is a wall mounting receptacle for usage of PG or metric glands. It mates with plugs CA06COM and CA08COM Part No. (pin insert*) A Thread d1 + 0,2 / - 0,1 d2 PG-Thread Metric l1 max CA00COM-PG10SL-*P-*** CA00COM-ME10SL-**P-*** 5/8-24UNEF-2A 3,1 PG9 M16 x 1,5 52 14,2 2,8 25,4 18,2 CA00COM-PG12S-**P-*** CA00COM-ME12S-**P-*** 3/4-20UNEF-2A 3,1 PG9 M16 x 1,5 52 14,2 3,2 28,0 20,6 CA00COM-PG14S-**P-*** CA00COM-ME14S-**P-*** 7/8-20UNEF-2A 3,1 PG11 M20 x 1,5 52 14,2 3,2 30,0 23,0 CA00COM-PG16S-*P-*** CA00COM-ME16S-**P-*** 1-20UNEF-2A 3,1 PG13,5 M20 x 1,5 54 14,2 3,2 32,5 24,6 CA00COM-PG16-**P-*** CA00COM-ME16-**P-*** 1-20UNEF-2A 3,1 PG13,5 M20 x 1,5 64 19,0 3,2 32,5 24,6 CA00COM-PG18-**P-*** CA00COM-ME18-**P-*** 1-1/8-18UNEF-2A 3,1 PG13,5 M25 x 1,5 69 19,0 4,0 35,0 27,0 CA00COM-PG20-**P-*** CA00COM-ME20-**P-*** 1-1/4-18UNEF-2A 3,1 PG16 M25 x 1,5 70 19,0 4,0 38,0 29,4 CA00COM-PG22-**P-*** CA00COM-ME22-**P-*** 1-3/8-18UNEF-2A 3,1 PG16 M32 x 1,5 73 19,0 4,0 41,0 31,8 CA00COM-PG24-**P-*** CA00COM-ME24-**P-*** 1-1/2-18UNEF-2A 3,7 PG16 M32 x 1,5 74 20,6 4,0 44,5 34,9 CA00COM-PG28-**P-*** CA00COM-ME28-**P-*** 1-3/4-18UNEF-2A 3,7 PG21 M32 x 1,5 74 20,6 4,0 50,8 39,7 CA00COM-PG32-**P-*** CA00COM-ME32-**P-*** 2-18UNS-2A 4,4 PG29 M40 x 1,5 76 22,2 4,0 57,0 44,5 CA00COM-PG36-**P-*** CA00COM-ME36-**P-*** 2-1/4-16UN-2A 4,4 PG29 M40 x 1,5 87 22,2 4,0 63,5 49,2 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** Add modification code; see page 10 (bottom) Dimensions shown in mm | Specifications and dimensions subject to change 18 www.ittcannon.com WALL MOUNTING RECEPTACLE CLASS E CA00COM-E-B with bayonet coupling CA00COM-E-B is a wall mounting receptacle with endbell and cable clamp. It mates with plugs CA06COM-B and CA08COM-B Part No. (pin insert*) d1 - 0,15 d21 d3 Thread l1 max l2 + 0,4 l3 + 0,2 l4 0,3 e 0,1 CA00COM-E10SL-**P-B-*** 18,2 7,9 M4 57 18,20 2,8 25,4 18,2 CA00COM-E12S-**P-B-*** 21,4 7,9 M4 57 18,20 3,2 28,0 20,6 CA00COM-E14S-**P-B-*** 24,6 11,1 M4 59 18,20 3,2 30,0 23,0 CA00COM-E16S-**P-B-*** 27,4 14,2 M4 60 18,20 3,2 32,5 24,6 CA00COM-E16-**P-B-*** 27,4 14,2 M4 68 23,05 3,2 32,5 24,6 CA00COM-E18-**P-B-*** 30,8 15,8 M4 72 23,05 4,0 35,0 27,0 CA00COM-E20-**P-B-*** 34,2 19,0 M4 72 23,05 4,0 38,0 29,4 CA00COM-E22-**P-B-*** 37,4 19,0 M4 72 23,05 4,0 41,0 31,8 CA00COM-E24-**P-B-*** 40,9 23,7 M4 78 23,05 4,0 44,5 34,9 CA00COM-E28-**P-B-*** 46,7 23,7 M5 79 24,05 4,0 50,8 39,7 CA00COM-E32-**P-B-*** CA00COM-E36-**P-B-*** 53,4 59,6 31,8 34,6 M5 M5 78 78 24,05 24,05 4,0 4,0 57,0 63,5 44,5 49,2 CA00COM-E with threaded coupling CA00COM-E is a wall mounting receptacle with endbell and cable clamp. It mates with plugs CA06COM and CA08COM Part No. (pin insert*) A Thread l1 max l2 0,3 l3 max l4 + 0,2/- 0,1 d1) + 0,4 d2 + 0,2/- 0,1 e 0,3 CA00COM-E10SL-**P-*** 5/8-24UNEF-2A 53 14,2 2,8 25,4 7,9 3,1 18,2 CA00COM-E12S-**P-*** 3/4-20UNEF-2A 53 14,2 3,2 28,0 7,9 3,1 20,6 CA00COM-E14S-**P-*** 7/8-20UNEF-2A 55 14,2 3,2 30,0 11,1 3,1 23,0 CA00COM-E16S-**P-*** 1-20UNEF-2A 56 14,2 3,2 32,5 14,2 3,1 24,6 CA00COM-E16-**P-*** 1-20UNEF-2A 66 19,0 3,2 32,5 14,2 3,1 24,6 CA00COM-E18-**P-*** 1-1/8-18UNEF-2A 68 19,0 4,0 35,0 15,8 3,1 27,0 CA00COM-E20-**P-*** 1-1/4-18UNEF-2A 68 19,0 4,0 38,0 19,0 3,1 29,4 CA00COM-E22-**P-*** 1-3/8-18UNEF-2A 68 19,0 4,0 41,0 19,0 3,1 31,8 CA00COM-E24-**P-*** 1-1/2-18UNEF-2A 76 20,6 4,0 44,5 23,7 3,7 34,9 CA00COM-E28-**P-*** 1-3/4-18UNEF-2A 76 20,6 4,0 50,8 23,7 3,7 39,7 CA00COM-E32-**P-*** 2-18UNS-2A 76 22,2 4,0 57,0 31,8 4,4 44,5 CA00COM-E36-**P-*** 2-1/4-16UN-2A 76 22,2 4,0 63,5 34,6 4,4 49,2 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** Add modification code; see page 10 (bottom) ) max cable dia Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 19 WALL MOUNTING RECEPTACLE CLASS F CA00COM-F-B with bayonet coupling CA00COM-F-B is a wall mounting receptacle with endbell for flextubes. It mates with plugs CA06COM-B and CA08COM-B Part No. (pin insert*) d1 - 0,15 d2 Thread d3) d4 Thread l1 max l2 + 0,4 l3 0,2 I4 0,3 l5 min e 0,1 CA00COM-F10SL-**P-B-*** 18,2 M4 8,2 5/8-24UNEF-2A 52 18,20 2,8 25,4 9,5 18,2 CA00COM-F12S-**P-B-*** 21,4 M4 8,2 5/8-20UNEF-2A 52 18,20 3,2 28,0 9,5 20,6 23,0 CA00COM-F14S-**P-B-*** 24,6 M4 11,1 3/4-20UNEF-2A 52 18,20 3,2 30,0 9,5 CA00COM-F16S-**P-B-*** 27,4 M4 14,3 7/8-20UNEF-2A 59 18,20 3,2 32,5 9,5 24,6 CA00COM-F16-**P-B-*** 27,4 M4 14,3 7/8-20UNEF-2A 59 23,05 3,2 32,5 9,5 24,6 CA00COM-F18-**P-B-*** 30,8 M4 16,7 1-20UNEF-2A 63 23,05 4,0 35,0 9,5 27,0 CA00COM-F20-**P-B-*** 34,2 M4 19,8 1-3/16-18UNEF-2A 63 23,05 4,0 38,0 9,5 29,4 CA00COM-F22-**P-B-*** 37,4 M4 19,8 1-3/16-18UNEF-2A 66 23,05 4,0 41,0 9,5 31,8 CA00COM-F24-**P-B-*** 40,9 M4 25,4 1-7/16-18UNEF-2A 69 23,05 4,0 44,5 9,5 34,9 CA00COM-F28-**P-B-*** 46,7 M5 27,0 1-7/16-18UNEF-2A 70 24,05 4,0 50,8 9,5 39,7 CA00COM-F32-**P-B-*** CA00COM-F36-**P-B-*** 53,4 59,6 M5 M5 32,5 35,7 1-3/4-18UNS-2A 2-18UNS-2A 71 73 24,05 24,05 4,0 4,0 57,0 63,5 11,0 11,8 44,5 49,2 l2 + 0,4 l3 0,3 I4 0,3 l5 min e 0,1 CA00COM-F with threaded coupling CA00COM-F is a wall mounting receptacle with endbell for flex tubes. It mates with plugs CA06COM and CA08COM Part No. (pin insert*) A Thread d2 + 0,2/- 0,1 d3) d4 Thread l1 max CA00COM-F10SL-**P-*** 5/8-24UNEF-2A 3,1 8,2 5/8-24UNEF-2A 45 14,2 2,8 25,4 9,5 18,2 CA00COM-F12S-**P-*** 3/4-20UNEF-2A 3,1 8,2 5/8-20UNEF-2A 45 14,2 3,2 28,0 9,5 20,6 CA00COM-F14S-**P-*** 7/8-20UNEF-2A 3,1 11,1 3/4-20UNEF-2A 45 14,2 3,2 30,0 9,5 23,0 CA00COM-F16S-**P-*** 7/8-20UNEF-2A 3,1 14,3 7/8-20UNEF-2A 45 14,2 3,2 32,5 9,5 24,6 CA00COM-F16-**P-*** 1-20UNEF-2A 3,1 14,3 7/8-20UNEF-2A 54 19,0 3,2 32,5 9,5 24,6 CA00COM-F18-**P-*** 1-1/8-18UNEF-2A 3,1 16,7 1-20UNEF-2A 54 19,0 4,0 35,0 9,5 27,0 CA00COM-F20-**P-*** 1-1/4-18UNEF-2A 3,1 19,8 1-3/16-18UNEF-2A 55 19,0 4,0 38,0 9,5 29,4 CA00COM-F22-**P-*** 1-3/8-18UNEF-2A 3,1 19,8 1-3/16-18UNEF-2A 58 19,0 4,0 41,0 9,5 31,8 CA00COM-F24-**P-*** 1-1/2-18UNEF-2A 3,7 25,4 1-7/16-18UNEF-2A 59 20,6 4,0 44,5 9,5 34,9 CA00COM-F28-**P-*** 1-3/4-18UNEF-2A 3,7 27,0 1-7/16-18UNEF-2A 60 20,6 4,0 50,8 9,5 39,7 CA00COM-F32-**P-*** 2-18UNS-2A 4,4 32,5 1-3/4-18UNS-2A 62 22,2 4,0 57,0 11,0 44,5 CA00COM-F36-**P-*** 2-1/4-16UN-2A 4,4 35,7 2-18UNS-2A 64 22,2 4,0 63,5 11,8 49,2 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** Add modification code; see page 10 (bottom) ) max cable dia Dimensions shown in mm | Specifications and dimensions subject to change 20 www.ittcannon.com WALL MOUNTING RECEPTACLE CLASS E CA00COM-E-B/-03/-06 with bayonet coupling CA00COM-E-B/-03/-06 is a wall mounting receptacle (wire sealing) for heat shrink boots. It mates with plugs CA06COM-B and CA08COM-B Part No. (pin insert*) d1 - 0,15 d2 Thread d3 0,2 d4) d5 max l1 max l2 + 0,4 l3 0,3 l4 0,3 l5 0,5 e 0,1 CA00COM-E10SL-**P-B-*** 18,2 M4 15,5 7,7 13,3 53 18,20 2,8 25,4 11,7 18,2 CA00COM-E12S-**P-B-*** 21,4 M4 15,5 7,9 13,3 53 18,20 3,2 28,0 11,7 20,6 CA00COM-E14S-**P-B-*** 24,6 M4 19,1 10,6 17,0 53 18,20 3,2 30,0 11,7 23,0 CA00COM-E16S-**P-B-*** 27,4 M4 23,9 13,5 21,9 53 18,20 3,2 32,5 11,7 24,6 CA00COM-E16-**P-B-*** 27,4 M4 23,9 13,5 21,9 61 23,05 3,2 32,5 11,5 24,6 CA00COM-E18-**P-B-*** 30,8 M4 23,9 14,6 21,9 62 23,05 4,0 35,0 11,5 27,0 CA00COM-E20-**P-B-*** 34,2 M4 29,6 14,6 26,2 64 23,05 4,0 38,0 12,7 29,4 CA00COM-E22-**P-B-*** 37,4 M4 29,6 20,8 26,2 64 23,05 4,0 41,0 12,7 31,8 CA00COM-E24-**P-B-*** 40,9 M4 37,8 24,6 34,5 64 23,05 4,0 44,5 12,7 34,9 CA00COM-E28-**P-B-*** 46,7 M5 37,8 27,0 34,5 66 24,05 4,0 50,8 12,7 39,7 CA00COM-E32-**P-B-*** CA00COM-E36-**P-B-*** 53,4 59,6 M5 M5 47,8 47,8 33,3 38,5 43,6 43,6 69 70 24,05 24,05 4,0 4,0 57,0 63,5 15,2 15,2 44,5 49,2 CA00COM-E-DN with threaded coupling CA00COM-E-DN is a wall mounting receptacle with endbell (wire sealing) for heat shrink boots. It mates with plugs CA06COM and CA08COM Part No. (pin insert*) A Thread d2 + 0,2/- 0,1 d3 0,2 d4) d5 max l1 max l2 + 0,4 l3 0,3 I4 0,5 l5 0,3 e 0,1 CA00COM-E10SL-**P-DN 5/8-24UNEF-2A 3,1 15,5 7,7 13,3 49,0 14,2 2,8 11,7 25,4 18,2 CA00COM-E12S-**P-DN 3/4-20UNEF-2A 3,1 15,5 7,9 13,3 49,0 14,2 3,2 11,7 28,0 20,6 CA00COM-E14S-**P-DN 7/8-20UNEF-2A 3,1 19,1 10,6 17,0 49,0 14,2 3,2 11,7 30,0 23,0 CA00COM-E16S-**P-DN 1-20UNEF-2A 3,1 23,9 13,5 21,9 49,0 14,2 3,2 11,7 32,5 24,6 CA00COM-E16-**P-DN 1-20UNEF-2A 3,1 23,9 13,5 21,9 58,0 19,0 3,2 11,5 32,5 24,6 CA00COM-E18-**P-DN 1-1/8-18UNEF-2A 3,1 23,9 14,6 21,9 58,0 19,0 4,0 11,5 35,0 27,0 CA00COM-E20-**P-DN 1-1/4-18UNEF-2A 3,1 23,9 14,6 26,2 60,0 19,0 4,0 12,7 35,0 27,0 CA00COM-E22-**P-DN 1-3/8-18UNEF-2A 3,1 29,6 20,8 26,2 60,0 19,0 4,0 12,7 41,0 31,8 CA00COM-E24-**P-DN 1-1/2-18UNEF-2A 3,7 37,8 24,6 34,5 63,0 20,6 4,0 12,7 44,5 34,9 CA00COM-E28-**P-DN 1-3/4-18UNEF-2A 3,7 37,8 27,0 34,5 63,0 20,6 4,0 12,7 50,8 39,7 CA00COM-E32-**P-DN 2-18UNS-2A 4,4 47,8 33,3 43,6 67,0 22,2 4,0 15,2 57,0 44,5 CA00COM-E36-**P-DN 2-1/4-16UN-2A 4,4 47,8 38,5 43,6 68,0 22,2 4,0 15,2 63,5 49,2 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** -03: with metric crimp contacts / -06: with solder pot contacts ) max cable dia Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 21 CABLE CONNECTING PLUG CLASS PG OR ME CA01COM-PG-B with bayonet coupling, CA01COM-ME-B CA01COM-PG/ME-B is a cable connecting plug for usage of PG or metric glands. It mates with plugs CA06COM-B and CA08COM-B Part No. PG (pin insert*) Part No. ME (pin insert*) PG-Thread Metric d3 max l1 max CA01COM-PG10SL-**P-B-*** CA01COM-ME10SL-**P-B-*** 18,2 PG9 M16 x 1,5 25,2 56 18,2 2,8 20,6 CA01COM-PG12S-**P-B-*** 21,4 PG9 M16 x 1,5 27,8 56 18,20 3,2 23,8 CA01COM-ME12S-**P-B-*** d2 l2 + 0,4 l3 + 0,2 l5 0,2 d1 - 0,15 CA01COM-PG14S-**P-B-*** CA01COM-ME14S-**P-B-*** 24,6 PG11 M20 x 1,5 29,8 56 18,20 3,2 25,4 CA01COM-PG16S-**P-B-*** CA01COM-ME16S-**P-B-*** 27,4 PG13,5 M20 x 1,5 32,3 58 18,20 3,2 28,6 CA01COM-PG16-**P-B-*** CA01COM-ME16-**P-B-*** 27,4 PG13,5 M20 x 1,5 32,3 66 23,05 3,2 28,6 CA01COM-PG18-**P-B-*** CA01COM-ME18-**P-B-*** 30,8 PG13,5 M25 x 1,5 34,8 73 23,05 4,0 31,7 CA01COM-PG20-**P-B-*** CA01COM-ME20-**P-B-*** 34,2 PG16 M25 x 1,5 37,8 74 23,05 4,0 34,9 CA01COM-PG22-**P-B-*** CA01COM-ME22-**P-B-*** 37,4 PG16 M32 x 1,5 41,1 77 23,05 4,0 38,1 CA01COM-PG24-**P-B-*** CA01COM-ME24-**P-B-*** 40,9 PG16 M32 x 1,5 44,6 77 23,05 4,0 41,3 CA01COM-PG28-**P-B-*** CA01COM-ME28-**P-B-*** 46,7 PG21 M32 x 1,5 50,9 78 24,05 4,0 47,6 CA01COM-PG32-**P-B-*** CA01COM-PG36-**P-B-*** CA01COM-ME32-**P-B-*** CA01COM-ME36-**P-B-*** 53,4 59,6 PG29 PG29 M40 x 1,5 M40 x 1,5 57,1 63,6 78 89 24,05 24,05 4,0 4,0 54,0 60,6 l1 max l2 + 0,4 l3 0,3 l4 max CA01COM-PG with threaded coupling CA01COM-PG/ME is a cable connecting plug for usage of PG or metric glands. It mates with plugs CA06COM and CA08COM Part No. PG (pin insert*) Part No. ME (pin insert*) A Thread d1 max d2 PG-Thread Metric CA01COM-PG10SL-**P-*** CA01COM-ME10SL-**P-*** 5/8-24UNEF-2A 16,2 PG9 M16 x 1,5 52 14,2 2,8 21,8 CA01COM-PG12S-**P-*** CA01COM-ME12S-**P-*** 3/4-20UNEF-2A 19,4 PG9 M16 x 1,5 52 14,2 3,2 25,0 CA01COM-PG14S-**P-*** CA01COM-ME14S-**P-*** 7/8-20UNEF-2A 22,5 PG11 M20 x 1,5 52 14,2 3,2 28,2 CA01COM-PG16S-**P-*** CA01COM-ME16S-**P-*** 1-20UNEF-2A 25,7 PG13,5 M20 x 1,5 54 14,2 3,2 31,4 CA01COM-PG16-**P-*** CA01COM-ME16-**P-*** 1-20UNEF-2A 25,7 PG13,5 M20 x 1,5 64 19,0 3,2 31,4 CA01COM-PG18-**P-*** CA01COM-ME18-**P-*** 1-1/8-18UNEF-2A 28,9 PG13,5 M25 x 1,5 69 19,0 4,0 34,5 CA01COM-PG20-**P-*** CA01COM-ME20-**P-*** 1-1/4-18UNEF-2A 32,1 PG16 M25 x 1,5 70 19,0 4,0 37,3 CA01COM-PG22-**P-*** CA01COM-ME22-**P-*** 1-3/8-18UNEF-2A 35,2 PG16 M32 x 1,5 73 19,0 4,0 40,9 CA01COM-PG24-**P-*** CA01COM-ME24-**P-*** 1-1/2-18UNEF-2A 38,4 PG16 M32 x 1,5 74 20,6 4,0 43,8 CA01COM-PG28-**P-*** CA01COM-ME28-**P-*** 1-3/4-18UNEF-2A 44,8 PG21 M32 x 1,5 74 20,6 4,0 50,4 CA01COM-PG32-**P-*** CA01COM-ME32-**P-*** 2-18UNS-2A 51,1 PG29 M40 x 1,5 76 22,2 4,0 56,8 CA01COM-PG36-**P-*** CA01COM-ME36-**P-*** 2-1/4-16UN-2A 57,5 PG29 M40 x 1,5 87 22,2 4,0 63,1 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** Add modification code; see page 10 (bottom) Dimensions shown in mm | Specifications and dimensions subject to change 22 www.ittcannon.com CABLE CONNECTING PLUG CLASS E CA01COM-E-B with bayonet coupling CA01COM-E-B is a cable connecting plug with endbell and cable clamp. It mates with plugs CA06COM-B and CA08COM-B Part No. (pin insert) d1 - 0,15 d2 ) d3 max l1 max l2 + 0,4 l3 0,2 I4 0,2 CA01COM-E10SL-**P-B-*** 18,2 7,9 25,2 57 18,20 2,8 20,6 CA01COM-E12S-**P-B-*** 21,4 7,9 27,8 57 18,20 3,2 23,8 CA01COM-E14S-**P-B-*** 24,6 11,1 29,8 59 18,20 3,2 25,4 CA01COM-E16S-**P-B-*** 27,4 14,2 32,3 60 18,20 3,2 28,6 CA01COM-E16-**P-B-*** 27,4 14,2 32,3 68 23,05 3,2 28,6 CA01COM-E18-**P-B-*** 30,8 15,8 34,8 72 23,05 4,0 31,7 CA01COM-E20-**P-B-*** 34,2 19,0 37,8 72 23,05 4,0 34,9 CA01COM-E22-**P-B-*** 37,4 19,0 41,1 72 23,05 4,0 38,1 CA01COM-E24-**P-B-*** 40,9 23,7 44,6 78 23,05 4,0 41,3 CA01COM-E28-**P-B-*** 46,7 23,7 50,9 79 24,05 4,0 47,6 CA01COM-E32-**P-B-*** 53,4 31,8 57,1 78 24,05 4,0 54,0 CA01COM-E36-**P-B-*** 59,6 34,6 63,6 78 24,05 4,0 60,6 CA01COM-E with threaded coupling CA01COM-E is a cable connecting plug with endbell and cable clamp. It mates with plugs CA06COM and CA08COM Part No. (pin insert) A Thread d1 max d2 ) l1 max l2 + 0,4 l3 0,3 I4 max CA01COM-E10SL-**P-*** 5/8-24UNEF-2A 21,8 7,9 53 14,2 2,8 16,2 CA01COM-E12S-**P-*** 3/4-20UNEF-2A 25,0 7,9 53 14,2 3,2 19,4 CA01COM-E14S-**P-*** 7/8-20UNEF-2A 28,2 11,1 55 14,2 3,2 22,5 CA01COM-E16S-**P-*** 1-20UNEF-2A 31,4 14,2 56 14,2 3,2 25,7 CA01COM-E16-**P-*** 1-20UNEF-2A 31,4 14,2 66 19,0 3,2 25,7 CA01COM-E18-**P-*** 1-1/8-18UNEF-2A 34,5 15,8 68 19,0 4,0 28,9 CA01COM-E20-**P-*** 1-1/4-18UNEF-2A 37,3 19,0 68 19,0 4,0 32,1 CA01COM-E22-**P-*** 1-3/8-18UNEF-2A 40,9 19,0 68 19,0 4,0 35,2 CA01COM-E24-**P-*** 1-1/2-18UNEF-2A 43,8 23,7 76 20,6 4,0 38,4 CA01COM-E28-**P-*** 1-3/4-18UNEF-2A 50,4 23,7 76 20,6 4,0 44,8 CA01COM-E32-**P-*** 2-18UNS-2A 56,8 31,8 76 22,2 4,0 51,1 CA01COM-E36-**P-*** 2-1/4-16UN-2A 63,1 34,6 76 22,2 4,0 57,5 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 23 *** Add modification code; see page 10 (bottom) ) max cable dia CABLE CONNECTING PLUG CLASS E CA01COM-E-B/-03/-06 with bayonet coupling CA01COM-E-B/-03/-06 is a cable connecting plug with endbell (wire sealing) for heat shrink boots. It mates with plugs CA06COM-B and CA08COM-B Part No. (pin insert*) d1 - 0,15 d2) max d3 max d4 0,2 d5 max l1 max l2 + 0,4 l3 0,3 l4 0,5 l5 0,2 CA01COM-E10SL-**P-B-*** 18,2 7,7 13,3 15,5 25,2 53 18,20 2,8 11,7 20,6 CA01COM-E12S-**P-B-*** 21,4 7,9 13,3 15,5 27,8 53 18,20 3,2 11,7 23,8 CA01COM-E14S-**P-B-*** 24,6 10,6 17,0 19,1 29,8 53 18,20 3,2 11,7 25,4 CA01COM-E16S-**P-B-*** 27,4 13,5 21,9 23,9 32,3 53 18,20 3,2 11,7 28,6 CA01COM-E16-**P-B-*** 27,4 13,5 21,9 23,9 32,3 61 23,05 3,2 11,5 28,6 CA01COM-E18-**P-B-*** 30,8 14,6 21,9 23,9 34,8 62 23,05 4,0 11,5 31,7 CA01COM-E20-**P-B-*** 34,2 18,7 26,2 29,6 37,8 64 23,05 4,0 12,7 34,9 CA01COM-E22-**P-B-*** 37,4 20,8 26,2 29,6 41,1 64 23,05 4,0 12,7 38,1 CA01COM-E24-**P-B-*** 40,9 24,6 34,5 37,8 44,6 64 23,05 4,0 12,7 41,3 CA01COM-E28-**P-B-*** 46,7 27,0 34,5 37,8 50,9 66 24,05 4,0 12,7 47,6 CA01COM-E32-**P-B-*** CA01COM-E36-**P-B-*** 53,4 59,6 33,3 38,5 43,6 43,6 47,8 47,8 57,1 63,6 69 70 24,05 24,05 4,0 4,0 15,2 15,2 54,0 60,6 CA01COM-E-DN with threaded coupling CA01COM-E-DN is a cable connecting plug with endbell (wire sealing) for heat shrink boots. It mates with plugs CA06COM and CA08COM Part No. (pin insert*) A Thread d1 max d2) max d3 0,5 d4 0,2 l1 max l2 0,3 l3 0,3 l4 max l5 0,2 CA01COM-E10SL-**P-DN 5/8-24UNEF-2A 21,8 7,7 15,5 15,5 49,0 14,2 2,8 11,7 16,2 CA01COM-E12S-**P-DN 3/4-20UNEF-2A 25,0 7,9 15,5 15,5 49,0 14,2 3,2 11,7 19,4 CA01COM-E14S-**P-DN 7/8-20UNEF-2A 28,2 10,6 19,1 19,1 49,0 14,2 3,2 11,7 22,5 25,7 CA01COM-E16S-**P-DN 1-20UNEF-2A 31,4 13,5 23,9 23,9 49,0 14,1 3,2 11,7 CA01COM-E16-**P-DN 1-20UNEF-2A 31,4 13,5 23,9 23,9 58,0 19,0 3,2 11,5 25,7 CA01COM-E18-**P-DN 1-1/8-18UNEF-2A 34,5 14,6 23,9 23,9 58,0 19,0 4,0 11,5 28,9 CA01COM-E20-**P-DN 1-1/4-18UNEF-2A 37,3 18,7 29,6 29,6 60,0 19,0 4,0 12,7 32,1 CA01COM-E22-**P-DN 1-3/8-18UNEF-2A 40,9 20,8 29,6 29,6 60,0 19,0 4,0 12,7 35,2 38,4 CA01COM-E24-**P-DN 1-1/2-18UNEF-2A 43,8 24,6 37,8 37,8 63,0 20,6 4,0 12,7 CA01COM-E28-**P-DN 1-3/4-18UNEF-2A 50,4 27,0 37,8 37,8 63,0 20,6 4,0 12,7 44,8 CA01COM-E32-**P-DN 2-18UNS-2A 56,8 33,3 47,8 47,8 67,0 22,2 4,0 15,2 51,1 CA01COM-E36-**P-DN 2-1/4-16UN-2A 63,1 38,5 47,8 47,8 68,0 22,2 4,0 15,2 57,5 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** -03: with metric crimp contacts / -06: with solder pot contacts ) max cable dia Dimensions shown in mm | Specifications and dimensions subject to change 24 www.ittcannon.com CABLE CONNECTING PLUG CLASS F CA01COM-F-B with bayonet coupling CA01COM-F-B is a cable connecting plug for flex tube. It mates with plugs CA06COM-B and CA08COM-B Part No. (pin insert*) d1 - 0,15 d2) d3 Thread d4 max l1 max l2 + 0,4 l3 0,2 l4 min l5 0,2 CA01COM-F10SL-**P-B-*** 18,2 8,2 5/8-24UNEF-2A 25,2 50 18,20 2,8 9,5 20,6 CA01COM-F12S-**P-B-*** 18,2 8,2 5/8-20UNEF-2A 27,8 50 18,20 3,2 9,5 23,8 25,4 CA01COM-F14S-**P-B-*** 24,6 11,1 3/4-20UNEF-2A 29,8 50 18,20 3,2 9,5 CA01COM-F16S-**P-B-*** 27,4 14,3 7/8-20UNEF-2A 32,3 50 18,20 3,2 9,5 28,6 CA01COM-F16-**P-B-*** 27,4 14,3 7/8-20UNEF-2A 32,3 57 23,05 3,2 9,5 28,6 CA01COM-F18-**P-B-*** 30,8 16,7 1-20UNEF-2A 34,8 59 23,05 4,0 9,5 31,7 CA01COM-F20-**P-B-*** 34,2 19,8 1-3/16-18UNEF-2A 37,8 59 23,05 4,0 9,5 34,9 CA01COM-F22-**P-B-*** 37,4 19,8 1-3/16-18UNEF-2A 41,1 62 23,05 4,0 9,5 38,1 CA01COM-F24-**P-B-*** 40,9 25,4 1-7/16-18UNEF-2A 44,6 62 23,05 4,0 9,5 41,3 CA01COM-F28-**P-B-*** 46,7 27,0 1-7/16-18UNEF-2A 50,9 64 24,05 4,0 9,5 47,6 CA01COM-F32-**P-B-*** CA01COM-F36-**P-B-*** 53,4 59,6 32,5 35,7 1-3/4-18UNS-2A 2-18UNS-2A 57,1 63,6 64 66 24,05 24,05 4,0 4,0 11,0 11,8 54,0 60,6 l1 max l2 + 0,4 l3 0,3 l4 min l5 0,2 16,2 CA01COM-F with threaded coupling CA01COM-F is a cable connecting plug for flex tube. It mates with plugs CA06COM and CA08COM Part No. (pin insert*) A Thread d1 max d2) d3 Thread CA01COM-F10SL-**P-*** 5/8-24UNEF-2A 21,8 8,2 5/8-24UNEF-2A 45 14,2 2,8 9,5 CA01COM-F12S-**P-*** 3/4-20UNEF-2A 25,0 8,2 5/8-20UNEF-2A 45 14,2 3,2 9,5 19,4 CA01COM-F14S-**P-*** 7/8-20UNEF-2A 28,2 11,1 3/4-20UNEF-2A 45 14,2 3,2 9,5 22,5 25,7 CA01COM-F16S-**P-*** 1-20UNEF-2A 31,4 14,3 7/8-20UNEF-2A 45 14,2 3,2 9,5 CA01COM-F16-**P-*** 1-20UNEF-2A 31,4 14,3 7/8-20UNEF-2A 54 14,2 3,2 9,5 25,7 CA01COM-F18-**P-*** 1-1/8-18UNEF-2A 34,5 16,7 1-20UNEF-2A 54 19,0 4,0 9,5 28,9 CA01COM-F20-**P-*** 1-1/4-18UNEF-2A 37,3 19,8 1-3/16-18UNEF-2A 55 19,0 4,0 9,5 32,1 CA01COM-F22-**P-*** 1-3/8-18UNEF-2A 40,9 19,8 1-3/16-18UNEF-2A 58 20,6 4,0 9,5 35,2 CA01COM-F24-**P-*** 1-1/2-18UNEF-2A 43,8 25,4 1-7/16-18UNEF-2A 59 20,6 4,0 9,5 38,4 CA01COM-F28-**P-*** 1-3/4-18UNEF-2A 50,4 27,0 1-7/16-18UNEF-2A 60 20,6 4,0 9,5 44,8 CA01COM-F32-**P-*** 2-18UNS-2A 56,8 32,5 1-3/4-18UNS-2A 62 22,2 4,0 11,0 51,1 CA01COM-F36-**P-*** 2-1/4-16UN-2A 63,1 35,7 2-18UNS-2A 64 22,2 4,0 11,8 57,5 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 25 *** Add modification code; see page 10 (bottom) ) max cable dia BOX MOUNTING RECEPTACLE CLASS E CA02COM-E-B with bayonet coupling CA02COM-E-B is a box mounting receptacle for front panel mounting. It mates with plugs CA06COM-B and CA08COM-B Part No. (pin insert*) d1 - 0,15 d2 H13 d3 max. l1 0,3 l2 + 0,4 l3 0,2 l4 0,3 e 0,1 CA02COM-E10SL-**-P-B-*** 18,2 3.1 16,2 24,7 14,2 2,8 25,4 18,2 CA02COM-E12S-**-P-B-*** 21,4 3.1 16,2 24,7 14,2 3,2 28,0 20,6 CA02COM-E14S-**-P-B-*** 24,6 3.1 19,2 24,7 14,2 3,2 30,0 23,0 CA02COM-E16S-**-P-B-*** 27,4 3.1 22,4 24,7 14,2 3,2 32,5 24,6 CA02COM-E16-**-P-B-*** 27,4 3.1 22,4 33,8 19,0 3,2 32,5 24,6 CA02COM-E18-**-P-B-*** 30,8 3.1 25,6 33,8 19,0 4,0 35,0 27,0 CA02COM-E20-**-P-B-*** 34,2 3.1 29,0 33,8 19,0 4,0 38,0 29,4 CA02COM-E22-**-P-B-*** 37,4 3.1 32,2 33,8 19,0 4,0 41,0 31,8 CA02COM-E24-**-P-B-*** 40,9 3.7 35,3 33,8 20,6 4,0 44,5 34,9 CA02COM-E28-**-P-B-*** 46,7 3.7 41,4 33,8 20,6 4,0 50,8 39,7 CA02COM-E32-**-P-B-*** CA02COM-E36-**-P-B-*** 53,4 59,6 4.4 4.4 47,8 52,6 33,8 33,8 22,2 22,2 4,0 4,0 57,0 63,5 44,5 49,2 l3 0,3 l4 0,3 e 0,1 CA02COM-E with threaded coupling CA02COM-E is a boxmounting receptacle for front panel mounting. It mates with plugs CA06COM and CA08COM Part No. (pin insert*) A Thread d1 max. d2 + 0,2 l1 max. l2 + 0,4 CA02COM-E10SL-**-P-*** 5/8-24UNEF-2A 15,9 3,1 25,1 14,2 2,8 25,4 18,2 CA02COM-E12S-**-P-*** 3/4-20UNEF-2A 15,9 3,1 25,1 14,2 3,2 28,0 20,6 CA02COM-E14S-**-P-*** 7/8-20UNEF-2A 19,0 3,1 25,1 14,2 3,2 30,0 23,0 CA02COM-E16S-**-P-*** 1-20UNEF-2A 22,2 3,1 25,1 14,2 3,2 32,5 24,6 CA02COM-E16-**-P-*** 1-20UNEF-2A 22,2 3,1 34,2 19,0 3,2 32,5 24,6 CA02COM-E18-**-P-*** 1-1/8-18UNEF-2A 25,4 3,1 34,2 19,0 4,0 35,0 27,0 CA02COM-E20-**-P-*** 1-1/4-18UNEF-2A 29,0 3,1 34,2 19,0 4,0 38,0 29,4 CA02COM-E22-**-P-*** 1-3/8-18UNEF-2A 32,2 3,1 34,2 19,0 4,0 41,0 31,8 CA02COM-E24-**-P-*** 1-1/2-18UNEF-2A 35,3 3,7 34,2 20,6 4,0 44,5 34,9 CA02COM-E28-**-P-*** 1-3/4-18UNEF-2A 41,2 3,7 34,2 20,6 4,0 50,8 39,7 CA02COM-E32-**-P-*** 2-18UNS-2A 47,6 4,4 34,2 22,2 4,0 57,0 44,5 CA02COM-E36-**-P-*** 2-1/4-16UN-2A 52,4 4,4 34,2 22,2 4,0 63,5 49,2 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** Add modification code; see page 10 (bottom) ) max cable dia Dimensions shown in mm | Specifications and dimensions subject to change 26 www.ittcannon.com BOX MOUNTING RECEPTACLE CLASS E CA20COM-E-B with bayonet coupling CA20COM-E-B is a box mounting receptacle for rear panel mounting. It mates with plugs CA06COM-B and CA08COM-B Part No. (pin insert*) d1 - 0,15 d2 d3 max. l1 0,3 l2 + 0,4 l3 0,2 l4 0,3 e 0,0 CA20COM-E10SL-**-P-B-*** 18,2 M4 16,2 24,7 18,20 2,8 25,4 18,2 CA20COM-E12S-**-P-B-*** 21,4 M4 16,2 24,7 18,20 3,2 28,0 20,6 CA20COM-E14S-**-P-B-*** 24,6 M4 19,2 24,7 18,20 3,2 30,0 23,0 CA20COM-E16S-**-P-B-*** 27,4 M4 22,4 24,7 18,20 3,2 32,5 24,6 CA20COM-E16-**-P-B-*** 27,4 M4 22,4 33,8 23,05 3,2 32,5 24,6 CA20COM-E18-**-P-B-*** 30,8 M4 25,6 33,8 23,05 4,0 35,0 27,0 CA20COM-E20-**-P-B-*** 34,2 M4 29,0 33,8 23,05 4,0 38,0 29,4 CA20COM-E22-**-P-B-*** 37,4 M4 32,2 33,8 23,05 4,0 41,0 31,8 CA20COM-E24-**-P-B-*** 40,9 M4 35,3 33,8 23,05 4,0 44,5 34,9 CA20COM-E28-**-P-B-*** 46,7 M5 41,4 33,8 24,05 4,0 50,8 39,7 CA20COM-E32-**-P-B-*** CA20COM-E36-**-P-B-*** 53,4 59,6 M5 M5 47,8 52,6 33,8 33,8 24,05 24,05 4,0 4,0 57,0 63,5 44,5 49,2 CA20COM-E with threaded coupling CA20COM-E is a box mounting receptacle for rear panel mounting. It mates with plugs CA06COM and CA08COM Part No. (pin insert*) A Thread d1 max d2 H13 Code: BM29 l1 max. l2 + 0,4 l3 0,3 l4 0,3 e 0,1 CA20COM-E10SL-**-P-*** 5/8-24UNEF-2A 14,5 3,2 M4 25,1 18,20 2,8 25.4 18,2 CA20COM-E12S-**-P-*** 3/4-20UNEF-2A 16,1 3,2 M4 25,1 18,20 3,2 28.0 20,6 CA20COM-E14S-**-P-*** 7/8-20UNEF-2A 19,2 3,2 M4 25,1 18,20 3,2 30.0 23,0 CA20COM-E16S-**-P-*** 1-20UNEF-2A 22,4 3,2 M4 25,1 18,20 3,2 32.5 24,6 CA20COM-E16-**-P-*** 1-20UNEF-2A 22,4 3,2 M4 34,2 21,50 3,2 32.5 24,6 CA20COM-E18-**-P-*** 1-1/8-18UNEF-2A 25,6 3,2 M4 34,2 23,05 4,0 35.0 27,0 CA20COM-E20-**-P-*** 1-1/4-18UNEF-2A 29,0 3,2 M4 34,2 23,05 4,0 38.0 29,4 CA20COM-E22-**-P-*** 1-3/8-18UNEF-2A 32,2 3,2 M4 34,2 23,05 4,0 41.0 31,8 CA20COM-E24-**-P-*** 1-1/2-18UNEF-2A 35,3 3,7 M5 34,2 24,05 4,0 44.5 34,9 CA20COM-E28-**-P-*** 1-3/4-18UNEF-2A 41,4 3,7 M5 34,2 24,05 4,0 50.8 39,7 CA20COM-E32-**-P-*** 2-18UNS-2A 47,8 4,4 M6 34,2 24,05 4,0 57.0 44,5 CA20COM-E36-**-P-*** 2-1/4-16UN-2A 54,1 4,4 M6 34,2 24,05 4,0 63.5 49,2 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 27 *** Add modification code; see page 10 (bottom) BOX MOUNTING RECEPTACLE CLASS L, WITH PCB TERMINATION CA02COM-L-B with bayonet coupling CA02COM-L-B is a box mounting receptacle for front panel mounting with pcb termination. It mates with plugs CA06COM-B and CA08COM-B Part No. (pin insert*) d1 - 0,15 d2 H13 d3 max. l1 0,3 l2 + 0,4 l3 0,2 l4 0,3 e 0,1 CA02COM-L10SL-**-P-B-*** 18,2 3.1 16,2 24,7 14,2 2,8 25,4 18,2 CA02COM-L12S-**-P-B-*** 21,4 3.1 16,2 24,7 14,2 3,2 28,0 20,6 CA02COM-L14S-**-P-B-*** 24,6 3.1 19,2 24,7 14,2 3,2 30,0 23,0 CA02COM-L16S-**-P-B-*** 27,4 3.1 22,4 24,7 14,2 3,2 32,5 24,6 CA02COM-L16-**-P-B-*** 27,4 3.1 22,4 33,8 19,0 3,2 32,5 24,6 CA02COM-L18-**-P-B-*** 30,8 3.1 25,6 33,8 19,0 4,0 35,0 27,0 CA02COM-L20-**-P-B-*** 34,2 3.1 29,0 33,8 19,0 4,0 38,0 29,4 CA02COM-L22-**-P-B-*** 37,4 3.1 32,2 33,8 19,0 4,0 41,0 31,8 CA02COM-L24-**-P-B-*** 40,9 3.7 35,3 33,8 20,6 4,0 44,5 34,9 CA02COM-L28-**-P-B-*** 46,7 3.7 41,4 33,8 20,6 4,0 50,8 39,7 CA02COM-L32-**-P-B-*** CA02COM-L36-**-P-B-*** 53,4 59,6 4.4 4.4 47,8 52,6 33,8 33,8 22,2 22,2 4,0 4,0 57,0 63,5 44,5 49,2 l4 0,3 e 0,1 CA02COM-L with threaded coupling CA02COM-L is a box mounting receptacle for front panel mounting with pcb termination. It mates with plugs CA06COM and CA08COM Part No. (pin insert*) A Thread d1 max d2 H13 l1 max l2 + 0,4 l3 0,3 CA02COM-L10SL-**-P-*** 5/8-24UNEF-2A 15,9 3,1 25,1 14,2 2,8 25,4 18,2 CA02COM-L12S-**-P-*** 3/4-20UNEF-2A 15,9 3,1 25,1 14,2 3,2 28,0 20,6 CA02COM-L14S-**-P-*** 7/8-20UNEF-2A 19,0 3,1 25,1 14,2 3,2 30,0 23,0 CA02COM-L16S-**-P-*** 1-20UNEF-2A 22,2 3,1 25,1 14,2 3,2 32,5 24,6 CA02COM-L16-**-P-*** 1-20UNEF-2A 22,2 3,1 34,2 19,0 3,2 32,5 24,6 CA02COM-L18-**-P-*** 1-1/8-18UNEF-2A 25,4 3,1 34,2 19,0 4,0 35,0 27,0 CA02COM-L20-**-P-*** 1-1/4-18UNEF-2A 29,0 3,1 34,2 19,0 4,0 38,0 29,4 CA02COM-L22-**-P-*** 1-3/8-18UNEF-2A 32,2 3,1 34,2 19,0 4,0 41,0 31,8 CA02COM-L24-**-P-*** 1-1/2-18UNEF-2A 35,3 3,7 34,2 20,6 4,0 44,5 34,9 CA02COM-L28-**-P-*** 1-3/4-18UNEF-2A 41,2 3,7 34,2 20,6 4,0 50,8 39,7 CA02COM-L32-**-P-*** 2-18UNS-2A 47,6 4,4 34,2 22,2 4,0 57,0 44,5 CA02COM-L36-**-P-*** 2-1/4-16UN-2A 52,4 4,4 34,2 22,2 4,0 63,5 49,2 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** Add modification code; see page 10 (bottom) Dimensions shown in mm | Specifications and dimensions subject to change 28 www.ittcannon.com BOX MOUNTING RECEPTACLE CLASS L, WITH PCB TERMINATION CA20COM-L-B with bayonet coupling CA20COM-L-B is a box mounting receptacle for rear panel mounting with pcb termination. It mates with plugs CA06COM-B and CA08COM-B Part No. (pin insert*) d1 - 0,15 d2 d3 max l1 0,3 l2 + 0,4 l3 0,2 l4 0,3 e 0,1 CA20COM-L10SL-**-P-B-*** 18,2 M4 16,2 24,7 18,20 2,8 25,4 18,2 CA20COM-L12S-**-P-B-*** 21,4 M4 16,2 24,7 18,20 3,2 28,0 20,6 CA20COM-L14S-**-P-B-*** 24,6 M4 19,2 24,7 18,20 3,2 30,0 23,0 CA20COM-L16S-**-P-B-*** 27,4 M4 22,4 24,7 18,20 3,2 32,5 24,6 CA20COM-L16-**-P-B-*** 27,4 M4 22,4 33,8 23,05 3,2 32,5 24,6 CA20COM-L18-**-P-B-*** 30,8 M4 25,6 33,8 23,05 4,0 35,0 27,0 CA20COM-L20-**-P-B-*** 34,2 M4 29,0 33,8 23,05 4,0 38,0 29,4 CA20COM-L22-**-P-B-*** 37,4 M4 32,2 33,8 23,05 4,0 41,0 31,8 CA20COM-L24-**-P-B-*** 40,9 M4 35,3 33,8 23,05 4,0 44,5 34,9 CA20COM-L28-**-P-B-*** 46,7 M5 41,4 33,8 24,05 4,0 50,8 39,7 CA20COM-L32-**-P-B-*** CA20COM-L36-**-P-B-*** 53,4 59,6 M5 M5 47,8 54,1 33,8 33,8 24,05 24,05 4,0 4,0 57,0 63,5 44,5 49,2 CA20COM-L with threaded coupling CA20COM-L is a box mounting receptacle for rear panel mounting with pcb termination. It mates with plugs CA06COM and CA08COM Part No. (pin insert*) A Thread d1 max d2 H13 l1 max l2 + 0,4 l3 0,3 l4 0,3 e 0,1 Std BM29 CA20COM-L10SL-**-P-*** 5/8-24UNEF-2A 14,5 3,2 CA20COM-L12S-**-P-*** 3/4-20UNEF-2A 16,1 3,2 M4 25,1 18,20 2,8 25.4 18,2 M4 25,1 18,20 3,2 28.0 CA20COM-L14S-**-P-*** 7/8-20UNEF-2A 19,2 20,6 3,2 M4 25,1 18,20 3,2 30.0 CA20COM-L16S-**-P-*** 1-20UNEF-2A 23,0 22,4 3,2 M4 25,1 18,20 3,2 32.5 CA20COM-L16-**-P-*** 24,6 1-20UNEF-2A 22,4 3,2 M4 34,2 21,50 3,2 32.5 24,6 CA20COM-L18-**-P-*** 1-1/8-18UNEF-2A 25,6 3,2 M4 34,2 23,05 4,0 35.0 27,0 CA20COM-L20-**-P-*** 1-1/4-18UNEF-2A 29,0 3,2 M4 34,2 23,05 4,0 38.0 29,4 CA20COM-L22-**-P-*** 1-3/8-18UNEF-2A 32,2 3,2 M4 34,2 23,05 4,0 41.0 31,8 CA20COM-L24-**-P-*** 1-1/2-18UNEF-2A 35,3 3,7 M5 34,2 24,05 4,0 44.5 34,9 CA20COM-L28-**-P-*** 1-3/4-18UNEF-2A 41,4 3,7 M5 34,2 24,05 4,0 50.8 39,7 CA20COM-L32-**-P-*** 2-18UNS-2A 47,8 4,4 M6 34,2 24,05 4,0 57.0 44,5 CA20COM-L36-**-P-*** 2-1/4-16UN-2A 54,1 4,4 M6 34,2 24,05 4,0 63.5 49,2 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 29 *** Add modification code; see page 10 (bottom) STRAIGHT PLUG PG OR METRIC ADAPTER CA06COM-PG/ME-B with bayonet coupling CA06COM-PG/ME-B is a straight plug for usage of PG and metric terminations. It mates with receptacles CA00COM-B, CA01COM-B, CA02COM-E-B and CA20COM-E-B Part No. (pin insert*) d1 max d2 PG-Thread Metric l1 max CA06COM-PG10SL-**P-B-*** CA06COM-ME10SL-*P-B-*** 22,8 PG9 M16 x 1,5 52,0 CA06COM-PG12S-**P-B-*** CA06COM-ME12S-**P-B-*** 26,0 PG9 M16 x 1,5 52,0 CA06COM-PG14S-**P-B-*** CA06COM-ME14S-**P-B-*** 29,2 PG11 M20 x 1,5 52,0 CA06COM-PG16S-**P-B-*** CA06COM-ME16S-*P-B-*** 32,0 PG13,5 M20 x 1,5 54,0 CA06COM-PG16-**P-B-*** CA06COM-ME16-**P-B-*** 32,0 PG13,5 M20 x 1,5 64,0 CA06COM-PG18-**P-B-*** CA06COM-ME18-**P-B-*** 36,5 PG13,5 M25 x 1,5 69,0 CA06COM-PG20-**P-B-*** CA06COM-ME20-**P-B-*** 39,9 PG16 M25 x 1,5 70,0 CA06COM-PG22-**P-B-*** CA06COM-ME22-**P-B-*** 42,1 PG16 M32 x 1,5 73,0 CA06COM-PG24-**P-B-*** CA06COM-ME24-**P-B-*** 46,6 PG16 M32 x 1,5 74,0 CA06COM-PG28-**P-B-*** CA06COM-ME28-**P-B-*** 53,4 PG21 M32 x 1,5 74,0 CA06COM-PG32-**P-B-*** CA06COM-PG36-**P-B-*** CA06COM-ME32-**P-B-*** CA06COM-ME36-**P-B-*** 60,1 66,3 PG29 PG29 M40 x 1,5 M40 x 1,5 76,0 87,0 CA06COM-PG/ME with threaded coupling CA06COM-PG/ME is a straight plug for usage of PG and metric terminations.It mates with receptacles CA00COM, CA01COM, CA02COM-E and CA20COM-E Part No. (pin insert*) A Thread d1 max d2 PG-Thread Metric l1 max CA06COM-PG10SL-**P-*** CA06COM-ME10SL-*P-*** 5/8-24UNEF-2B 24,1 PG9 M16 x 1,5 52,0 CA06COM-PG12S-**P-*** CA06COM-ME12S-**P-*** 3/4-20UNEF-2B 25,8 PG9 M16 x 1,5 52,0 CA06COM-PG14S-**P-*** CA06COM-ME14S-**P-*** 7/8-20UNEF-2B 28,8 PG11 M20 x 1,5 52,0 CA06COM-PG16S-**P-*** CA06COM-ME16S-*P-*** 1-20UNEF-2B 31,8 PG13,5 M20 x 1,5 54,0 CA06COM-PG16-**P-*** CA06COM-ME16-**P-*** 1-20UNEF-2B 31,8 PG13,5 M20 x 1,5 64,0 CA06COM-PG18-**P-*** CA06COM-ME18-**P-*** 1-1/8-18UNEF-2B 34,1 PG13,5 M25 x 1,5 69,0 CA06COM-PG20-**P-*** CA06COM-ME20-**P-*** 1-1/4-18UNEF-2B 37,4 PG16 M25 x 1,5 70,0 CA06COM-PG22-**P-*** CA06COM-ME22-**P-*** 1-3/8-18UNEF-2B 40,5 PG16 M32 x 1,5 73,0 CA06COM-PG24-**P-*** CA06COM-ME24-**P-*** 1-1/2-18UNEF-2B 43,8 PG16 M32 x 1,5 74,0 CA06COM-PG28-**P-*** CA06COM-ME28-**P-*** 1-3/4-18UNEF-2B 50,2 PG21 M32 x 1,5 74,0 CA06COM-PG32-**P-*** CA06COM-ME32-**P-*** 2-18UNS-2B 56,4 PG29 M40 x 1,5 76,0 CA06COM-PG36-**P-*** CA06COM-ME36-**P-*** 2-1/4-16UN-2B 62,8 PG29 M40 x 1,5 87,0 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** Add modification code; see page 10 (bottom) Dimensions shown in mm | Specifications and dimensions subject to change 30 www.ittcannon.com STRAIGHT PLUG CLASS E CA06COM-E-B with bayonet coupling CA06COM-E-B is a straight plug with endbell and cable clamp. It mates with receptacles CA00COM-B CA01COM-B, CA02COM-E-B and CA20COM-E-B Part No. (pin insert*) d1 max. d2) max. l1 CA06COM-E10SL-**P-B-*** 22,8 7,9 53 CA06COM-E12S-**P-B-*** 26,0 7,9 53 CA06COM-E14S-**P-B-*** 29,2 11,1 55 CA06COM-E16S-**P-B-*** 32,0 14,2 56 CA06COM-E16-**P-B-*** 32,0 14,2 66 CA06COM-E18-**P-B-*** 36,5 15,8 68 CA06COM-E20-**P-B-*** 39,9 19,0 68 CA06COM-E22-**P-B-*** 43,1 19,0 68 CA06COM-E24-**P-B-*** 46,6 23,7 76 CA06COM-E28-**P-B-*** 53,4 23,7 76 CA06COM-E32-**P-B-*** CA06COM-E36-**P-B-*** 60,1 66,3 31,8 34,6 76 76 CA06COM-E with threaded coupling CCA06COM-E is a straight plug with endbell and cable clamp. It mates with receptacles CA00COM, CA01COM, CA02COM-E and CA20COM-E Part No. (pin insert*) A Thread d1 max d2) max. l1 max. CA06COM-E10SL-**P-*** 5/8-24UNEF-2B 24,1 7,9 53 CA06COM-E12S-**P-*** 3/4-20UNEF-2B 25,8 7,9 53 CA06COM-E14S-**P-*** 7/8-20UNEF-2B 28,8 11,1 55 CA06COM-E16S-**P-*** 1-20UNEF-2B 31,8 14,2 56 CA06COM-E16-**P-*** 1-20UNEF-2B 31,8 14,2 66 CA06COM-E18-**P-*** 1-1/8-18UNEF-2B 34,1 15,8 68 CA06COM-E20-**P-*** 1-1/4-18UNEF-2B 37,4 19,0 68 CA06COM-E22-**P-*** 1-3/8-18UNEF-2B 40,5 19,0 68 CA06COM-E24-**P-*** 1-1/2-18UNEF-2B 43,8 23,7 76 CA06COM-E28-**P-*** 1-3/4-18UNS-2B 50,2 23,7 76 CA06COM-E32-**P-*** 2-18UNS-2B 56,4 31,8 76 CA06COM-E36-**P-*** 2-1/4-16UN-2B 62,8 34,6 76 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 31 *** Add modification code; see page 10 (bottom) ) max cable dia STRAIGHT PLUG CLASS F CA06COM-F-B with bayonet coupling CA06COM-F-B is a straight plug with endbell for flex tubes. It mates with receptacles CA00COM-B, CA01COM-B, CA02COM-E-B and CA20COM-E-B Part No. (pin insert*) d1 max d2) max l2 min l1 max CA06COM-F10SL-**P-B-*** 22,8 8,2 9,5 45 CA06COM-F12S-**P-B-*** 26,0 8,2 9,5 45 CA06COM-F14S-**P-B-*** 29,2 11,1 9,5 45 CA06COM-F16S-**P-B-*** 32,0 14,3 9,5 45 CA06COM-F16-**P-B-*** 32,0 14,3 9,5 54 CA06COM-F18-**P-B-*** 36,5 16,7 9,5 54 CA06COM-F20-**P-B-*** 39,9 19,8 9,5 55 CA06COM-F22-**P-B-*** 43,1 19,8 9,5 58 CA06COM-F24-**P-B-*** 46,6 25,4 9,5 59 CA06COM-F28-**P-B-*** 53,4 27,0 9,5 59 CA06COM-F32-**P-B-*** CA06COM-F36-**P-B-*** 60,1 66,3 32,5 35,7 11,0 11,8 62 64 CA06COM-F with threaded coupling CA06COM-F is a straight plug with endbell for flex tubes. It mates with receptacles CA00COM, CA01COM, CA02COM-E and CA20COM-E Part No. (pin insert*) A Thread d1 max d2) d3 Thread l1 max l2 min CA06COM-F10SL-**P-*** 5/8-24UNEF-2B 24,1 8,2 5/8-24UNEF-2A 45 9,5 CA06COM-F12S-**P-*** 3/4-20UNEF-2B 25,8 8,2 5/8-20UNEF-2A 45 9,5 CA06COM-F14S-**P-*** 7/8-20UNEF-2B 28,8 11,1 3/4-20UNEF-2A 45 9,5 CA06COM-F16S-**P-*** 1-20UNEF-2B 31,8 14,3 7/8-20UNEF-2A 45 9,5 CA06COM-F16-**P-*** 1-20UNEF-2B 31,8 14,3 7/8-20UNEF-2A 54 9,5 CA06COM-F18-**P-*** 1-1/8-18UNEF-2B 34,1 16,7 1-20UNEF-2A 54 9,5 CA06COM-F20-**P-*** 1-1/4-18UNEF-2B 37,4 19,8 1-3/16-18UNEF-2A 55 9,5 CA06COM-F22-**P-*** 1-3/8-18UNEF-2B 40,5 19,8 1-3/16-18UNEF-2A 58 9,5 CA06COM-F24-**P-*** 1-1/2-18UNEF-2B 43,8 25,4 1-7/16-18UNEF-2A 59 9,5 CA06COM-F28-**P-*** 1-3/4-18UNEF-2B 50,2 27,0 1-7/16-18UNEF-2A 60 9,5 CA06COM-F32-**P-*** 2-18UNS-2B 56,4 32,5 1-3/4-18UNS-2A 62 11,0 CA06COM-F36-**P-*** 2-1/4-16UN-2B 62,8 35,7 2-18UNS-2A 64 11,8 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** Add modification code; see page 10 (bottom) ) max cable dia Dimensions shown in mm | Specifications and dimensions subject to change 32 www.ittcannon.com STRAIGHT PLUG CLASS E CA06COM-E-B /-03/-06 with bayonet coupling CA06COM-E-B /-03/-06 is a straight plug with endbell (wire sealing) for heat shrink boots. It mates with receptacles CA00COM-B, CA01COM-B, CA02COM-E-B and CA20COM-E-B Part No. (pin insert*) d1 max d2) d3 max d4 0,2 l1 max l2 0,5 CA06COM-E10SL-**P-B-*** 22,8 7,7 13,3 15,5 49 11,7 CA06COM-E12S-**P-B-*** 26,0 7,9 13,3 15,5 49 11,7 CA06COM-E14S-**P-B-*** 29,2 10,6 17,0 19,1 49 11,7 CA06COM-E16S-**P-B-*** 32,0 13,5 21,9 23,9 49 11,7 CA06COM-E16-**P-B-*** 32,0 13,5 21,9 23,9 58 11,5 CA06COM-E18-**P-B-*** 36,5 14,6 21,9 23,9 58 11,5 CA06COM-E20-**P-B-*** 39,9 18,7 26,2 29,6 60 12,7 CA06COM-E22-**P-B-*** 43,1 20,8 26,2 29,6 60 12,7 CA06COM-E24-**P-B-*** 46,6 24,6 34,5 37,8 63 12,7 CA06COM-E28-**P-B-*** 53,4 27,0 34,5 37,8 63 12,7 CA06COM-E32-**P-B-*** CA06COM-E36-**P-B-*** 60,1 66,3 33,3 38,5 43,6 43,6 47,8 47,8 67 68 15,2 15,2 CA06COM-E-DN with threaded coupling CA06COM-E-DN is a straight plug with endbell (wire sealing) for heat shrink boots. It mates with receptacles CA00COM, CA01COM and CA02COM-E and CA20COM-E Part No. (pin insert*) A Thread d1 max d2) max d3 max d4 0,2 l1 max l2 0,5 CA06COM-E10SL-**P-DN 5/8-24UNEF-2B 24,1 7,7 13,3 15,5 49 11,7 CA06COM-E12S-**P-DN 3/4-20UNEF-2B 25,8 7,9 13,3 15,5 49 11,7 CA06COM-E14S-**P-DN 7/8-20UNEF-2B 28,8 10,6 17,0 19,1 49 11,7 CA06COM-E16S-**P-DN 1-20UNEF-2B 31,8 13,5 21,9 23,9 49 11,7 CA06COM-E16-**P-DN 1-20UNEF-2B 31,8 13,5 21,9 23,9 58 11,5 CA06COM-E18-**P-DN 1-1/8-18UNEF-2B 34,1 14,6 21,9 23,9 58 11,5 CA06COM-E20-**P-DN 1-1/4-18UNEF-2B 37,4 18,7 26,2 29,6 60 12,7 CA06COM-E22-**P-DN 1-3/8-18UNEF-2B 40,5 20,8 26,2 29,6 60 12,7 CA06COM-E24-**P-DN 1-1/2-18UNEF-2B 43,8 24,6 34,5 37,8 63 12,7 CA06COM-E28-**P-DN 1-3/4-18UNEF-2B 50,2 27,0 34,5 37,8 63 12,7 CA06COM-E32-**P-DN 2-18UNS-2B 56,4 33,3 43,6 47,8 67 15,2 CA06COM-E36-**P-DN 2-1/4-16UN-2B 62,8 38,5 43,6 47,8 68 15,2 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** -03: with metric crimp contacts, -06: with solder pot contacts ) max cable dia Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 33 90 PLUG CLASS E CA08COM-E-B with bayonet coupling CA08COM-E-B is a 90 plug with cable clamp. It mates with receptacles CA00COM-B, CA01COM-B, CA02COM-E-B and CA20COM-E-B Part No. (pin insert*) d1 max d2) l1 max l2 max l3 max CA08COM-E10SL-**P-B-*** 22,8 7,9 45 42 22,7 CA08COM-E12S-**P-B-*** 26,0 7,9 45 42 22,7 CA08COM-E14S-**P-B-*** 29,2 11,1 47 42 27,5 CA08COM-E16S-**P-B-*** 32,0 14,2 48 45 30,0 CA08COM-E16-**P-B-*** 32,0 14,2 48 45 30,0 CA08COM-E18-**P-B-*** 36,5 15,8 58 53 33,0 CA08COM-E20-**P-B-*** 39,9 19,0 61 53 37,5 CA08COM-E22-**P-B-*** 43,1 19,0 61 53 37,5 CA08COM-E24-**P-B-*** 46,6 23,7 66 58 43,3 CA08COM-E28-**P-B-*** 53,4 23,7 66 58 43,3 CA08COM-E32-**P-B-*** CA08COM-E36-**P-B-*** 60,1 66,3 31,8 34,6 72 75 66 69 51,7 58,0 CA08COM-E with threaded coupling CA08COM-E is a 90 plug with cable clamp. It mates with receptacles CA00COM, CA01COM, CA02COM-E and CA20COM-E Part No. (pin insert*) A Thread d1 max d2) l1 max l2 max l3 max CA08COM-E10SL-**P-*** 5/8-24UNEF-2B 24,1 7,9 45 42 22,7 CA08COM-E12S-**P-*** 3/4-20UNEF-2B 25,8 7,9 45 42 22,7 CA08COM-E14S-**P-*** 7/8-20UNEF-2B 28,8 11,1 47 42 27,5 CA08COM-E16S-**P-*** 1-20UNEF-2B 31,8 14,2 48 45 30,0 CA08COM-E16-**P-*** 1-20UNEF-2B 31,8 14,2 48 45 30,0 CA08COM-E18-**P-*** 1-1/8-18UNEF-2B 34,1 15,8 58 53 33,0 CA08COM-E20-**P-*** 1-1/4-18UNEF-2B 37,4 19,0 61 53 37,5 CA08COM-E22-**P-*** 1-3/8-18UNEF-2B 40,5 19,0 61 53 37,5 CA08COM-E24-**P-*** 1-1/2-18UNEF-2B 43,8 23,7 66 58 43,3 CA08COM-E28-**P-*** 1-3/4-18UNEF-2B 50,2 23,7 66 58 43,3 CA08COM-E32-**P-*** 2-18UNS-2B 56,4 31,8 72 66 51,7 CA08COM-E36-**P-*** 2-1/4-16UN-2B 62,8 34,6 75 69 58,0 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** Add modification code; see page 10 (bottom) ) max cable dia Dimensions shown in mm | Specifications and dimensions subject to change 34 www.ittcannon.com 90 PLUG CLASS F CA08COM-F-B with bayonet coupling CA08COM-F-B is a 90 plug for flex tubes. It mates with receptacles CA00COM-B, CA01COM-B, CA02COM-E-B and CA20COM-E-B Part No. (pin insert*) d1 max d2 Thread l1 max l2 min l3 max CA08COM-F10SL-**P-B-*** 22,8 5/8-24UNEF-2B 45 9,4 22,0 CA08COM-F12S-**P-B-*** 26,0 5/8-20UNEF-2B 45 9,4 22,0 CA08COM-F14S-**P-B-*** 29,2 3/4-20UNEF-2B 47 9,4 24,0 CA08COM-F16S-**P-B-*** 32,0 7/8-20UNEF-2B 48 9,4 25,0 CA08COM-F16-**P-B-*** 32,0 7/8-20UNEF-2B 57 9,4 25,0 CA08COM-F18-**P-B-*** 36,5 1-20UNEF-2B 58 9,4 27,0 CA08COM-F20-**P-B-*** 39,9 1-3/16-18UNEF-2B 61 9,4 29,0 CA08COM-F22-**P-B-*** 43,1 1-3/16-18UNEF-2B 61 9,4 30,0 CA08COM-F24-**P-B-*** 46,6 1-7/16-18UNEF-2B 66 9,4 32,0 CA08COM-F28-**P-B-*** 53,4 1-7/16-18UNEF-2B 66 9,4 34,0 CA08COM-F32-**P-B-*** CA08COM-F36-**P-B-*** 60,1 66,3 1-3/4-18UNS-2B 2-18UNS-2B 72 75 11,0 12,6 39,5 45,0 CA08COM-F with threaded coupling CA08COM-F is a 90 plug for flex tubes. It mates with receptacles CA00COM, CA01COM, CA02COM-E and CA20COM-E Part No. (pin insert*) A Thread d1 max d2 Thread l1 max l2 min l3 max CA08COM-F10SL-**P-*** 5/8-24UNEF-2B 24,1 5/8-24UNEF-2A 45 9,4 22,0 CA08COM-F12S-**P-*** 3/4-20UNEF-2B 25,8 5/8-20UNEF-2A 45 9,4 22,0 CA08COM-F14S-**P-*** 7/8-20UNEF-2B 28,8 3/4-20UNEF-2A 47 9,4 24,0 CA08COM-F16S-**P-*** 1-20UNEF-2B 31,8 7/8-20UNEF-2A 48 9,4 25,0 CA08COM-F16-**P-*** 1-20UNEF-2B 31,8 7/8-20UNEF-2A 48 9,4 25,0 CA08COM-F18-**P-*** 1-1/8-18UNEF-2B 34,1 1-20UNEF-2A 58 9,4 27,0 CA08COM-F20-**P-*** 1-1/4-18UNEF-2B 37,4 1-3/16-18UNEF-2A 61 9,4 29,0 CA08COM-F22-**P-*** 1-3/8-18UNEF-2B 40,5 1-3/16-18UNEF-2A 61 9,4 30,0 CA08COM-F24-**P-*** 1-1/2-18UNEF-2B 43,8 1-7/16-18UNEF-2A 66 9,4 32,0 CA08COM-F28-**P-*** 1-3/4-18UNEF-2B 50,2 1-7/16-18UNEF-2A 66 9,4 34,0 CA08COM-F32-**P-*** 2-18UNS-2B 56,4 1-3/4-18UNS-2A 72 11,0 39,5 CA08COM-F36-**P-*** 2-1/4-16UN-2B 62,8 2-18UNS-2A 75 12,6 45,0 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 35 *** Add modification code; see page 10 (bottom) 90 PLUG CLASS PG (METRIC THREAD OPTION UNAVAILABLE) CA08COM-PG-B with bayonet coupling CA08COM-PG-B designates a 90 plug for usage of PG terminations. It mates with receptacles CA00COM-B, CA01COM-B, CA02COM-E-B and CA20COM-E-B Part No. (pin insert*) d1 max. d2 l1 max l2 0,5 CA08COM-E10SL-**P-B-*** 22.8 PG9 57 18.5 CA08COM-E12S-**P-B-*** 26.0 PG9 57 18.5 CA08COM-E14S-**P-B-*** 29.2 PG11 59 19.5 CA08COM-E16S-**P-B-*** 32.0 PG13,5 63 22.0 CA08COM-E16-**P-B-*** 32.0 PG13,5 72 22.0 CA08COM-E18-**P-B-*** 36.5 PG16 77 26.3 CA08COM-E20-**P-B-*** 39.9 PG21 82 29.0 CA08COM-E22-**P-B-*** 43.1 PG21 82 29.5 CA08COM-PG with threaded coupling CA08COM-PG designates a 90 plug for usage of PG terminations. It mates with receptacles CA00COM, CA01COM, CA02COM-E and CA20COM Part No. (pin insert*) A Thread d1 max. d2 l1 max l2 0,5 CA08COM-E10SL-**P-*** 5/8-24UNEF-2B 24.1 PG9 57 18.5 CA08COM-E12S-**P-*** 3/4-20UNEF-2B 25.8 PG9 57 18.5 CA08COM-E14S-**P-*** 7/8-20UNEF-2B 28.8 PG11 59 19.5 CA08COM-E16S-**P-*** 1-20UNEF-2B 31.8 PG13,5 63 22.0 CA08COM-E16-**P-*** 1-20UNEF-2B 31.8 PG13,5 72 22.0 CA08COM-E18-**P-*** 1-1/8-20UNEF-2B 34.1 PG16 77 26.3 CA08COM-E20-**P-*** 1-1/4-20UNEF-2B 37.4 PG21 82 29.0 CA08COM-E22-**P-*** 1-3/8-20UNEF-2B 40.5 PG21 82 29.5 * For socket inserts substitute "S" for "P" **Add contact arrangement number; see pages 11-15 *** Add modification code; see page 10 (bottom) ) max cable dia Dimensions shown in mm | Specifications and dimensions subject to change 36 www.ittcannon.com ACCESSORIES PROTECTIVE CAPS with cord for receptacles with bayonet coupling. It mates with receptacles CA00COM-B, CA01COM-E-B and CA02COM-E-B CA20COM-E-B Part No. Shell size d1 max l1 10 l2 max T + 0,25 CA121003-1701 10SL 22.4 100 16 4.3 CA121003-1702 12S 25.6 100 16 4.3 CA121003-1703 14S 28.8 100 16 4.3 CA121003-1704 16S 31.6 100 16 4.3 CA121003-1705 16 31.6 113 16 4.3 CA121003-1706 18 35.7 113 16 4.3 CA121003-1707 20 39.1 127 16 4.3 CA121003-1708 22 42.3 127 16 4.3 CA121003-1709 24 45.8 127 16 4.3 CA121003-1710 28 51.6 169 18 5.5 CA121003-1711 CA121003-1712 32 36 58.3 64.5 169 169 18 18 5.5 5.5 PROTECTIVE CAPS with cord for receptacles with threaded coupling. It mates with receptacles CA00COM, CA01COM and CA02COM and CA20COM Part No. Shell size A d1 l1 l2 T Thread max max max + 0,2 CA121003-1601 10 SL 5/8-24UNEF-2B 20.2 100 16,0 3.6 CA121003-1602 12S 3/4-20UNEF-2B 23,4 120 16,0 3.6 CA121003-1603 14S 7/8-20UNEF-2B 26.6 120 16,0 3.6 CA121003-1604 16S,16 1-20UNEF-2B 29.8 120 16,0 3.6 CA121003-1606 18 1-1/8-18UNEF-2B 32.9 120 16,0 3.6 CA121003-1607 20 1-1/4-18UNEF-2B 36.1 125 16,0 3.6 CA121003-1608 22 1-3/8-18UNEF-2B 39.4 125 16,0 3.6 CA121003-1609 24 1-1/2-18UNEF-2B 42.6 140 16,0 4.4 CA121003-1610 28 1-3/4-18UNEF-2B 48.9 200 18,0 4.4 CA121003-1611 32 2-18UNS-2B 55.3 200 18,0 4.8 CA121003-1612 36 2-1/4-16UN-2B 61.6 200 18,0 4.8 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 37 ACCESSORIES PROTECTIVE CAPS with cord for receptacles with bayonet coupling. It mates with receptacles CA06COM-B and CA08COM-B Part No. Shell size d1 max l1 ca l2 max T + 0,5 CA121004-1701 10SL 20,7 100 29 4,3 CA121004-1702 12S 23,9 113 29 4,3 CA121004-1703 14S 27,1 113 29 4,3 CA121004-1704 16S 29,9 113 29 4,3 CA121004-1705 16 29,9 127 37 4,3 CA121004-1706 18 33,3 127 37 4,3 CA121004-1707 20 36,7 140 37 4,7 CA121004-1708 22 39,9 140 37 4,7 CA121004-1709 24 43,4 140 37 4,7 CA121004-1710 28 49,2 197 37 4,7 CA121004-1711 CA121004-1712 32 36 55,9 62,1 197 197 37 37 5,5 5,5 PROTECTIVE CAPS with cord for receptacles with threaded coupling. It mates with receptacles CA06COM and CA08COM Part No. Shell size A d1 l1 T Thread max ca. + 0,4 CA121004-1601 10SL 5/8-24UNEF-2A 16,7 100 4,0 CA121004-1602 12S 3/4-20UNEF-2A 19,8 100 4,0 CA121004-1603 14S 7/8-20UNEF-2A 23,0 115 4,0 CA121004-1604 16S, 16 1-20UNEF-2A 26,2 115 4,0 CA121004-1606 18 1-1/8-18UNEF-2A 29,4 115 4,0 CA121004-1607 20 1-1/4-18UNEF-2A 32,5 125 4,8 CA121004-1608 22 1-3/8-18UNEF-2A 35,7 125 4,8 CA121004-1609 24 1-1/2-18UNEF-2A 38,9 140 4,8 CA121004-1610 28 1-3/4-18UNEF-2A 45,2 200 4,8 CA121004-1611 32 2-18UNS-2A 51,6 200 5,6 CA121004-1612 36 2-1/4-16UN-2A 57,9 200 5,6 Dimensions shown in mm | Specifications and dimensions subject to change 38 www.ittcannon.com ACCESSORIES CABLE CLAMP WITHOUT BUSHING Part No. Shell size A Thread d1 max l1 max l2 max CA121051-325 10SL, 12S CA121051-326 14S 5/8-24UNEF-2B 7,9 20,8 22,5 3/4-20UNEF-2B 11,1 22,4 CA121051-327 16S, 16 27,4 7/8-20UNEF-2B 14,2 24,0 29,8 CA121051-328 18 1-20UNEF-2B 15,8 24,0 32,2 CA121051-329 20, 22 1-3/16-18UNEF-2B 19,0 24,0 37,4 CA121051-330 24, 28 1-7/16-18UNEF-2B 23,7 26,4 43,5 CA121051-331 CA121051-332 32 36 1-3/4-18UNS-2B 2-18UNS-2B 31,8 34,6 28,0 29,6 51,7 57,8 TELESCOPING BUSHING The telescoping bushing is used together with above cable clamps CA121051-... or the other E type cable clamp connectors. It keeps oil, dirt or dust out of the endbell. Taping or wrapping or insulating of the wires feed through the clamp is eliminated since they are protected by the bushing. Combinations of bushings may be used to reduce cable entry diameters for improved sealing. Part No. Shell size d1 d2 d3 l1 - 0,3 - 0,3 max max 012-8552-000 10SL, 12S 8,0 6,6 9,9 70 012-8554-000 14S 10,9 9,1 12,7 67 012-0218-000 16S, 16 14,0 11,1 19,0 64 012-0219-000 18 15,7 14,3 22,0 60 012-0220-000 20, 22 18,8 15,9 26,9 57 012-8555-000 24, 28 21,2 16,6 26,9 57 012-8556-000 24, 28 23,6 21,5 33,3 54 012-8557-000 32 26,5 21,5 33,3 54 012-8558-000 32 31,5 26,8 40,4 51 012-8558-000 36 31,5 26,8 40,4 51 012-0223-000 36 34,7 31,8 46,8 48 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 39 ACCESSORIES GASKETS These sealing gaskets made of neoprene are used with receptacles with flange for sealing between the shell and the flange of the receptacle Gaskets for CA00COM-B / CA20COM-B (Rear panel mounting bayonet) Part No. Shell size d1 + 0,3 d2 + 0,5 l 0,5 e 0,2 075-8501-000 10SL 18,2 4,2 25,4 18,2 075-8502-000 12S 21,4 4,2 28,0 20,6 075-8503-000 14S 24,6 4,2 30,0 23,0 075-8504-000 16S, 16 27,4 4,2 32,5 24,6 075-8505-000 18 30,8 4,2 35,0 27,0 075-8506-000 20 34,2 4,2 38,0 29,4 075-8507-000 22 37,4 4,2 41,0 31,8 075-8508-000 24 40,9 4,2 44,5 34,9 075-8509-000 28 46,7 5,1 50,8 39,7 075-8510-000 32 53,4 5,1 57,0 44,5 075-8511-000 36 59,6 5,1 63,5 49,2 Gaskets for CA00COM / CA02COM / CA02COM-B Part No. Shell size d1 d2 l e + 1,0 + 0,5 0,5 0,2 075-8512-000 10SL 15,7 4,2 25,4 18,2 075-8513-000 12S 18,9 4,2 28,0 20,6 075-8514-000 14S 22,1 4,2 30,0 23,0 075-8515-000 16S, 16 25,3 4,2 32,5 24,6 075-8516-000 18 28,4 4,2 35,0 27,0 075-8517-000 20 31,6 4,2 38,0 29,4 075-8518-000 22 34,8 4,2 41,0 31,8 075-8519-000 24 38,0 4,2 44,5 34,9 075-8520-000 28 44,3 5,1 50,8 39,7 075-8521-000 32 50,7 5,1 57,0 44,5 075-8522-000 36 57,0 5,1 63,5 49,2 Dimensions shown in mm | Specifications and dimensions subject to change 40 www.ittcannon.com ACCESSORIES CONTACTS Standard contacts and contacts with reduced termination diameter SIZE 15S/16S, 15/16, 25/12, 60/100/8, 160/4, 500/0 SIZE 10/20 Pin contacts Finish: A36 - 5 m silver plated and passivated Contact size 10/20 15S /16S 15 /16 25 /12 Wire size Part no. d1 -0,05 d4 d6 d7 l1 0,15 l3 0,5 20 /18 030-8585-000 1,04 1,50 1,50 2,40 28,4 4,75 - 26 /22 030-8585-010 1,04 1,50 0,90 2,40 28,4 4,75 blue 0,75 - 1,5 18 /16 030-8586-000 1,60 1,75 1,75 2,75 27,4 3,85 - 0,3 - 0,6 22 /20 330-8744-000 1,60 1,75 1,20 2,75 27,4 3,85 red blue mm AWG 0,5 - 1,0 0,2 - 0,4 Color code 0,14 - 0,38 22 /26 030-8586-010 1,60 1,75 0,90 2,75 27,4 3,85 0,75 - 1,5 18 /16 030-8587-000 1,60 1,75 1,75 2,75 31,4 7,90 - 0,3 - 0,6 22 /20 330-8659-000 1,60 1,75 1,20 2,75 31,4 7,90 red blue 0,14 - 0,38 22 /26 030-8587-030 1,60 1,75 0,90 2,75 31,4 7,90 2,0 - 3,0 14 /12 030-8588-000 2,40 3,30 2,50 3,80 37,0 7,90 - 0,75 - 1,5 18 /16 030-8588-010 2,40 3,30 1,75 3,40 37,0 7,90 black 4,0 - 030-8588-054 2,40 3,30 2,80 3,80 37,0 7,90 - 8 030-8612-000 3,60 6,25 4,55 6,80 39,6 6,35 - 6,0 10 030-8589-000 3,60 6,25 3,50 6,80 39,6 6,35 yellow 60/100/8 10,0 - 030-8590-000 3,60 6,25 4,80 6,80 39,6 6,35 - 2,0 - 3,0 14 /12 030-8612-010 3,60 6,25 2,50 6,80 39,6 6,35 green 160/4 500/0 - 4 030-8613-000 5,75 9,55 7,10 9,55 39,6 6,35 - 16,0 - 030-8591-000 5,75 9,55 6,20 9,55 39,6 6,35 - 10,0 - 030-8591-020 5,75 9,55 4,80 9,55 39,6 6,35 - - 6 030-8613-010 5,75 9,55 5,70 9,55 39,6 6,35 brown - - 0 030-8614-000 9,10 13,55 11,5 14,35 41,0 6,35 50,0 - 030-8592-000 9,10 13,55 10,7 14,35 41,0 6,35 - 25,0 4 030-8614-010 9,10 13,55 7,60 14,35 41,0 6,35 white 35,0 2 030-8614-020 9,10 13,55 9,10 14,35 41,0 6,35 grey 16,0 - 030-8614-030 9,10 13,55 6,20 14,35 41,0 6,35 - Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 41 ACCESSORIES CONTACTS Standard contacts and contacts with reduced termination diameter SIZE 10/20 SIZE 25/12 SIZE 15S/16S 15/16 SIZE 60/100/8 160/4 500/0 Socket contacts Finish: A36 - 5 m silver plated and passivated Contact size Wire size mm 10/20 15S /16S 15 /16 25 /12 60/100/8 160/4 500/0 Part no. d1 AWG d2 + 0,05 d3 d5 d6 l1 0,2 l3 0,1 Color code 0,5 -1,0 20/18 031-8554-000 2,0 1,07 1,5 1,5 2,4 36,8 0,3 4,75 - 0,2 - 0,4 26/22 031-8554-010 2,0 1,07 1,5 0,9 2,4 36,8 0,3 4,75 blue 0,75 -1,5 18 /16 031-8555-110 3,2 1,65 1,75 1,75 2,75 29,1 3,9 - 0,3 - 0,6 22/20 031-8688-110 3,2 1,65 1,75 1,2 2,75 29,1 3,9 red 0,14 - 0,38 22/26 031-8555-130 3,2 1,65 1,75 0,9 2,75 29,1 3,9 blue 0,75 -1,5 0,3 - 0,6 0,14 - 0,38 18 /16 22/20 22/26 031-8556-110 031-8639-120 031-8556-130 3,2 3,2 3,2 1,65 1,65 1,65 1,75 1,75 1,75 1,75 1,2 0,9 2,75 2,75 2,75 37,8 37,8 37,8 7,9 7,9 7,9 - red blue 2,0 - 3,0 14/12 031-8557-000 4,8 2,45 3,3 2,5 3,8 37,0 7,9 - 0,75 -1,5 18/16 031-8557-020 4,8 2,45 3,3 1,75 3,4 37,0 7,9 black 4,0 0,3 - 0,6 - 22/20 031-8557-010 031-8557-040 4,8 4,8 2,45 2,45 3,3 3,3 2,8 1,2 3,8 2,75 37,0 37,0 7,9 7,9 - - - 8 031-8519-000 6,5 3,65 6,25 4,55 6,8 40,1 6,35 - 6,0 10 031-8558-000 6,5 3,65 6,25 3,5 6,8 40,1 6,35 yellow 10,0 - 031-8559-000 6,5 3,65 6,25 4,8 6,8 40,1 6,35 - 2,0 - 3,0 14 /12 031-8519-010 6,5 3,65 6,25 2,5 6,8 40,1 6,35 green - 4 031-8520-000 8,6 5,8 9,55 7,1 9,55 40,1 6,35 - 16,0 - 031-8560-000 8,6 5,8 9,55 6,2 9,55 40,1 6,35 - 10,0 - 031-8560-020 8,6 5,8 9,55 4,8 9,55 40,1 6,35 - - 6 031-8520-010 8,6 5,8 9,55 5,7 9,55 40,1 6,35 brown - 0 031-8521-000 13,2 9,15 13,55 11,5 14,35 41,6 6,35 - 50,0 - 031-8561-000 13,2 9,15 13,55 10,7 14,35 41,6 6,35 - 25,0 4 031-8521-010 13,2 9,15 13,55 7,6 14,35 41,6 6,35 white 35,0 2 031-8521-020 13,2 9,15 13,55 9,1 14,35 41,6 6,35 grey 16,0 - 031-8521-030 13,2 9,15 13,55 6,2 14,35 41,6 6,35 - Remark: For Socket contact installation the following guiding pins are essential: Contact size guide pin # 15/16 and 15S /16 guide pin # 12/25 Part number 27977-16T50 27977-12T8 Dimensions shown in mm | Specifications and dimensions subject to change 42 www.ittcannon.com ACCESSORIES TOOLING FOR CONTACT CRIMPING AND INSTALLATION HAND CRIMP TOOL M22520-1-01 PART NUMBER 995-0001-585 Contact size 10 Pin 15S /16S Socket 15S /S16 15/16 25 /12 Wire size mm AWG 0,5 - 1,0 20 /18 0,2 - 0,4 26 /22 0,75 - 1,5 18 /16 0,3 - 0,6 0,14 - 0,38 22 /20 22 /26 0,75 - 1,5 18 /16 0,3 - 0,6 22 /20 0,14 - 0,38 0,75 - 1,5 0,3 - 0,6 22 /26 18 /16 22 /20 0,14 - 0,38 22 /26 2,0 - 3,0 14 /12 0,75 - 1,5 18 /16 4,0 - Crimp Locator Order Reference 600325 121586-0034 TH 452 995-0002-052 HYDRAULIC HANDCRIMP TOOL HPW400U-ITT PART NUMBER 121586-5257 Contact size 60/100/8 Wire size Specifics mm 6,0 2,0 - 3,0 AWG 8 10 - 14 /12 16,0 4 160/4 10,0 6 - 0 500/0 50,0 - 25,0 4 35,0 2 16,0 - The hydraulic handcrimp tool HPW400UITT is delivered without crimp dies. Please order your specific crimp dies seperately, on page 44 ELECTRO HYDRAULIC TOOL HP700EL-ITT PART NUMBER 121586-5279 Contact size Wire size mm Specifics AWG 6,0 8 2,0 - 3,0 10 - 14 /12 16,0 4 60/100/8 160/4 10,0 6 - 0 500/0 50,0 - 25,0 4 35,0 2 16,0 - The electro-hydraulic tool HP700EL-ITT is delivered with an H-crimp head (table mount), foot pedal and hand control. Please order crimp dies as well as switch mode power supply or lithium-ion battery separately - details below. ACCESSORIES FOR ELECTR HYDRAULIC CRIMP TOOL HP700EL-ITT PART NUMBER 121586-5279 Description Marking Part Number Switch mode power supply SNT4-ITT 121586-5280 Lithium Ion Battery 18V 3A with recharger LGA4-ITT 121586-5281 Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 43 ACCESSORIES TOOLING FOR CONTACT INSERTION AND EXTRACTION INSERTION AND EXTRACTION TOOLS Insertion Tools Type Part No. CIT 20 121086-3009 CIT 16 121086-3008 CIT12 121086-3007 CIT-F80-16 121086-0097 CIT-F80-12 121086-0096 CIT 8 121086-0095 CIT 4 121086-0094 CIT 0 121086-0093 Insertion Pliers Type Part No. CIT-F80-20 121086-0098 Extraction Tools Type CET-F80-20 CET-F80-16 CET-F80-12 CET-8 CET-4 CET-0 Part No. 121086-0082 121086-0081 121086-0080 121086-0079 121086-0078 121086-0077 CRIMP DIES FOR MS/CA, VG95234 Contact size Wire size mm 60/100/8 Hex. Diameter Stamped Label Part Number AWG 6/10 8 5,20 01 121586-5231 160/4 16 4 7,25 02 121586-5230 500/0 50,0 0 11,40 03 121586-5229 Locator for MS/CA, part number 121586-5232 Notes: 1. For large series production, semi-automatic crimp machine Type HACS-IV-MSXX upon request 2. For insertion and extraction of the contacts and for connector assembly see "Assembly instructions SAE-AS50151/VG95234 3. Standard contacts acc. to SAE-AS50151/VG95234 Dimensions shown in mm | Specifications and dimensions subject to change 44 www.ittcannon.com PRODUCT SAFETY INFORMATION 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionization and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. www.ittcannon.com Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 4. DISPOSAL Incineration of certain materials may release noxious or even toxic fumes. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V DC are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION (i) Air and creepage paths/Operating voltage. The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. (ii) Temperature All information given are temperature limits. The operation temperature depends on the individual application. (iii) Other important information Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. ITT Cannon manufactures the highest quality products available int he marketplace; however these products are intended to be used in accordance with the specifications 45 in this publication. Any use or application that deviates from the stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. NOTES _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________ 46 www.ittcannon.com Amazing things happen when great things connect www.ittcannon.com 47 Connect with your ITT Cannon reresentative today or visit us at www.ittcannon.com Connect with the experts ITT's Cannon brand is a world leader in the design and manufacture of highly engineered connector solutions for multiple end markets. North America 56 Technology Drive Irvine, CA 92618 Phone: +1.800.854.3028 Europe Italy Corso Europa 41/43 20020 Lainate (MI), Italy Phone: +39.02938721 Germany Cannonstrasse 1 71384 Weinstadt, Germany Phone: +49.7151.699.0 The "ITT Engineered Blocks" symbol, "Engineered for life", "ITT" and "Cannon" are registered trademarks of ITT Inc. Specification and other data are based on information available at the time of printing, and are subject to change without notice. Asia Tuopandun Industrial Area, Jinda Cheng, Xiner Village, Shajing Town, Boan District, Shenzhen City, Guangdong Province, China 518215 Phone: +86.755.2726.7888 (c) 2018 ITT Inc. ITT Cannon CAB Cat 112018