096 PLL-4TSI www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Power Long Life 4-Terminal Snap-In FEATURES * Polarized aluminum electrolytic capacitors, non-solid electrolyte * Large types, minimized dimensions, cylindrical aluminum case, insulated with a blue sleeve * Pressure relief on the side of the aluminum case * Very long useful life: 5000 h at 85 C * Temperature range up to 85 C * Keyed polarity * Low ESR, high ripple current capability * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS 095 longer life * * * * * * 096 Fig. 1 QUICK REFERENCE DATA DESCRIPTION Nominal case size (D x L in mm) Rated capacitance range CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 85 C Useful life at 85 C Useful life at 40 C, 1.4 x IR applied Shelf life at 0 V, 85 C Max. RMS value of ripple voltage Based on sectional specification Climatic category IEC 60068 VALUE 35 x 50 to 45 x 100 390 F to 2700 F 20 % 350 V to 500 V -40 C to +85 C 2000 h 5000 h Telecommunication and industrial systems Smoothing and filtering applications Switched mode power supplies Renewable energy power converters Energy storage in pulse systems For excellent mounting stability MARKING The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance code on rated capacitance, code letter in accordance with IEC 60062 (M for 20 %) * Rated voltage (in V) * Date code (YYMM) * Name of manufacturer * Code for factory of origin * "-" sign to identify the negative terminal, visible from the top and side of the capacitor * Code number * Climatic category in accordance with IEC 60068 200 000 h 1000 h 12 V IEC 60384-4 / EN130300 40 / 085 / 56 SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (O D x L in mm) UR (V) CR (F) 390 470 350 - 560 - - - - 35 x 60 680 - 820 35 x 50 40 x 40 35 x 50 40 x 50 35 x 60 40 x 50 35 x 60 40 x 50 35 x 70 40 x 60 1000 35 x 60 40 x 50 35 x 70 40 x 60 35 x 80 40 x 60 35 x 70 40 x 50 35 x 80 40 x 60 35 x 100 40 x 70 45 x 60 1200 35 x 70 40 x 60 35 x 80 40 x 70 40 x 70 40 x 80 45 x 70 45 x 100 35 x 80 40 x 70 45 x 60 40 x 80 45 x 60 40 x 100 45 x 70 45 x 100 40 x 80 45 x 60 40 x 100 45 x 70 40 x 100 45 x 80 45 x 100 40 x 100 45 x 70 35 x 60 40 x 50 35 x 60 40 x 50 35 x 70 40 x 60 45 x 50 35 x 80 40 x 70 45 x 60 35 x 100 40 x 80 45 x 70 40 x 100 45 x 80 40 x 100 45 x 80 45 x 100 - 40 x 100 45 x 100 45 x 100 - - 45 x 100 45 x 100 - - - 1500 1800 2200 2700 Revision: 14-Oct-16 385 - 400 - 420 - 450 - 500 35 x 60 35 x 70 35 x 70 40 x 60 35 x 80 40 x 70 35 x 100 40 x 80 40 x 100 45 x 70 Document Number: 28392 1 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 096 PLL-4TSI www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS PRINTED WIRING 2.5 1 3 2 2 OD + 1 max. 3 15 0.1 1 L+ 5 max. L 1.3 (4 x) 7.5 0.1 4.9 0.2 CCA976-1 17.5 0.1 Fig. 2 - Printed wiring pin version (Case O D = 35 mm) Fig. 3 - Mounting hole diagram viewed from component side (Case O D = 35 mm) 2.5 1 4 2 5 3 3 OD + 1 max. - 2 4 20 0.1 1 L + 5 max. L 1.3 (5 x) 10 0.1 17.5 0.1 20 0.1 5.1 0.1 Fig. 4 - Printed wiring pin version (Case O D = 40 mm) Fig. 5 - Mounting hole diagram viewed from component side (Case O D = 40 mm) FOUR TERMINAL SNAP-IN 60 60 60 B 60 A C dummy dummy OD 22.5 0.1 2 0.1 (4 x) 22.5 Lmax. Bottom view 6.3 1 Dummy terminals (A and C) must be free from the electrical circuit Fig. 6 - 4-Terminal snap-in Fig. 7 - Mounting hole diagram Pin number 1 is the positive terminal. Pin "-" is the negative terminal. Pin numbers 2, 3 and 4 (if present) should be free from the electrical circuit or connected to the minus terminal. Revision: 14-Oct-16 Document Number: 28392 2 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 096 PLL-4TSI www.vishay.com Vishay BCcomponents Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ODxL 35 x 50 35 x 60 35 x 70 35 x 80 35 x 100 40 x 40 40 x 50 40 x 60 40 x 70 40 x 80 40 x 100 45 x 40 45 x 50 45 x 60 45 x 70 45 x 80 45 x 100 O DMAX. 4T-SI Lmax. PW L+5 MASS (g) PACKAGING QUANTITIES (units per box) 36 36 36 36 36 41 41 41 41 41 41 46 46 46 46 46 46 52 62 72 82 102 42 52 62 72 82 102 42 52 62 72 82 102 55 65 75 85 105 45 55 65 75 85 105 - 72 91 103 115 151 70 94 118 134 150 176 88 119 150 170 190 250 50 50 50 50 50 50 50 25 25 25 25 36 36 36 36 36 36 ORDERING EXAMPLE ELECTRICAL DATA SYMBOL CR IR IL5 ESR Z CARDBOARD BOX DIMENSIONS LxWxH 390 x 198 x 60 390 x 198 x 70 377 x 375 x 97 377 x 375 x 107 377 x 375 x 127 440 x 223 x 60 440 x 223 x 70 230 x 230 x 80 230 x 230 x 90 230 x 230 x 100 230 x 230 x 120 TBD 377 x 375 x 77 377 x 375 x 87 377 x 375 x 97 377 x 375 x 107 377 x 375 x 127 Electrolytic capacitor 096 series DESCRIPTION Rated capacitance at 100 Hz Rated RMS ripple current at 100 Hz and 85 C Max. leakage current after 5 min at UR Max. equivalent series resistance at 100 Hz Max. impedance at 10 kHz 820 F / 385 V; Printed wiring: Ordering code: MAL2 096 18821 E3 Former 12NC: 2222 096 18821 4-terminal snap-in: Note * Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Ordering code: MAL2 096 68821 E3 Former 12NC: 2222 096 68821 Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) CR 100 Hz (F) NOMINAL CASE SIZE ODxL (mm) IR 100 Hz 85 C (A) IL5 5 min (A) ESR 100 Hz (m) Zmax. 10 kHz (m) 4T-SI PW 350 820 820 1000 1000 1200 1200 1500 1500 1500 1800 1800 2200 2200 2700 35 x 50 40 x 40 35 x 60 40 x 50 35 x 70 40 x 60 35 x 80 40 x 70 45 x 60 40 x 80 45 x 60 40 x 100 45 x 70 45 x 100 4.0 3.8 4.7 4.8 5.3 5.4 6.0 6.2 6.3 6.9 6.6 8.2 7.4 9.2 578 578 704 704 844 844 1054 1054 1054 1264 1264 1544 1544 1894 126 134 104 108 87 90 71 73 76 62 68 51 57 44 82 90 67 72 57 59 47 49 52 41 48 34 41 30 15821E3 25821E3 15102E3 25102E3 15122E3 25122E3 15152E3 25152E3 35152E3 25182E3 35182E3 25222E3 35222E3 35272E3 65821E3 75821E3 65102E3 75102E3 65122E3 75122E3 65152E3 75152E3 75182E3 75222E3 - Revision: 14-Oct-16 CATALOG NUMBER MAL2096....... Document Number: 28392 3 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 096 PLL-4TSI www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 385 400 420 CR 100 Hz (F) NOMINAL CASE SIZE ODxL (mm) IR 100 Hz 85 C (A) IL5 5 min (A) ESR 100 Hz (m) Zmax. 10 kHz (m) 4T-SI PW 680 35 x 50 3.7 528 140 88 18681E3 68681E3 680 40 x 50 4.2 528 140 87 28681E3 78681E3 820 35 x 60 4.4 635 116 73 18821E3 68821E3 820 40 x 50 4.5 635 120 76 28821E3 78821E3 1000 35 x 70 5.0 774 96 60 18102E3 68102E3 1000 40 x 60 5.1 774 99 63 28102E3 78102E3 1200 35 x 80 5.5 928 81 51 18122E3 68122E3 1200 40 x 70 5.7 928 83 53 28122E3 78122E3 1500 40 x 80 6.5 1159 68 43 28152E3 78152E3 CATALOG NUMBER MAL2096....... 1500 45 x 60 6.2 1159 74 50 38152E3 - 1800 40 x 100 7.7 1390 56 36 28182E3 78182E3 1800 45 x 70 7.0 1390 62 43 38182E3 - 2200 40 x 100 8.2 1698 49 32 28222E3 78222E3 2700 45 x 100 9.1 2083 43 29 38272E3 - 680 35 x 60 4.1 548 134 82 16681E3 66681E3 680 40 x 50 4.2 548 138 85 26681E3 76681E3 820 35 x 60 4.4 660 114 71 16821E3 66821E3 820 40 x 50 4.5 660 119 75 26821E3 76821E3 1000 35 x 70 5.0 804 94 59 16102E3 66102E3 1000 40 x 60 5.1 804 97 62 26102E3 76102E3 1000 45 x 50 5.1 804 103 67 36102E3 - 1200 35 x 80 5.5 964 80 50 16122E3 66122E3 1200 40 x 70 5.7 964 82 52 26122E3 76122E3 1200 45 x 60 5.9 964 85 55 36122E3 - 1500 35 x 100 7.1 1204 64 40 16152E3 66152E3 1500 40 x 80 6.5 1204 67 43 26152E3 76152E3 1500 45 x 70 6.6 1204 69 46 36152E3 - 1800 40 x 100 7.7 1444 56 35 26182E3 76182E3 1800 45 x 80 7.3 1444 59 39 36182E3 - 2200 45 x 100 8.6 1764 48 32 36222E3 - 2700 45 x 100 9.1 2164 42 29 36272E3 - 680 35 x 60 4.1 575 137 85 14681E3 64681E3 680 40 x 50 4.2 575 141 89 24681E3 74681E3 820 35 x 70 4.6 693 114 71 14821E3 64821E3 820 40 x 60 4.7 693 117 74 24821E3 74821E3 1000 35 x 80 5.1 844 95 59 14102E3 64102E3 1000 40 x 60 5.1 844 100 64 24102E3 74102E3 1200 40 x 70 5.7 1012 84 54 24122E3 74122E3 1500 40 x 100 7.2 1264 66 42 24152E3 74152E3 1500 45 x 70 6.6 1264 71 48 34152E3 - 1800 40 x 100 7.6 1516 57 37 24182E3 74182E3 1800 45 x 80 7.2 1516 60 40 34182E3 - 2200 45 x 100 8.5 1852 49 33 34222E3 - Revision: 14-Oct-16 Document Number: 28392 4 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 096 PLL-4TSI www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) CR 100 Hz (F) NOMINAL CASE SIZE ODxL (mm) IR 100 Hz 85 C (A) IL5 5 min (A) ESR 100 Hz (m) Zmax. 10 kHz (m) 4T-SI PW 560 35 x 60 3.8 508 155 94 17561E3 67561E3 680 35 x 70 4.2 616 129 78 17681E3 67681E3 680 40 x 50 4.2 616 136 85 27681E3 77681E3 820 35 x 80 4.8 742 108 66 17821E3 67821E3 820 40 x 60 4.7 742 112 70 27821E3 77821E3 1000 35 x 100 6.0 904 89 54 17102E3 67102E3 1000 40 x 70 5.3 904 93 58 27102E3 77102E3 1000 45 x 60 5.5 904 97 62 37102E3 - 1200 40 x 80 6.0 1084 78 49 27122E3 77122E3 450 500 CATALOG NUMBER MAL2096....... 1200 45 x 70 6.1 1084 81 52 37122E3 - 1500 40 x 100 7.2 1354 63 39 27152E3 77152E3 1500 45 x 80 6.8 1354 67 43 37152E3 - 1800 45 x 100 8.0 1624 55 35 37182E3 - 390 35 x 60 2.9 394 475 421 19391E3 69391E3 470 35 x 70 3.3 474 395 350 19471E3 69471E3 560 35 x 70 3.6 564 333 296 19561E3 69561E3 560 40 x 60 3.7 564 336 299 29561E3 79561E3 680 35 x 80 4.1 684 275 245 19681E3 69681E3 680 40 x 70 4.2 684 277 247 29681E3 79681E3 820 35 x 100 5.1 824 229 203 19821E3 69821E3 820 40 x 80 4.7 824 231 206 29821E3 79821E3 1000 40 x 100 5.6 1004 189 169 29102E3 79102E3 1000 45 x 70 5.3 1004 195 176 39102E3 - 1200 45 x 100 6.4 1204 160 144 39122E3 - 1500 45 x 100 7.0 1504 131 118 39152E3 - ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE 350 V versions Us = 1.1 x UR Voltage Surge voltage Urev 1 Reverse voltage Current Leakage current After 1 min at UR IL1 0.006 CR x UR + 4 A After 5 min at UR IL5 0.002 CR x UR + 4 A All case sizes Ca. 20 nH Inductance Equivalent series inductance (ESL) RIPPLE CURRENT AND USEFUL LIFE Table 3 ENDURANCE TEST DURATION AND USEFUL LIFE ENDURANCE AT 85 C (h) USEFUL LIFE AT 85 C (h) 2000 5000 Note * Multiplier of useful life code: CCC205-05 Revision: 14-Oct-16 Document Number: 28392 5 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 096 PLL-4TSI www.vishay.com Vishay BCcomponents CCC205-05 2.6 2.4 2.2 IA IR 2.0 1.8 1.6 1.4 Lifetime multiplier 1.2 (1) 1.0 5 1. 0 2. 0 3. 0 4. 0 6. 10 20 0.8 30 40 1.0 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz and 85 C (1) Useful life at 85 C and IR applied: 5000 h 0.5 0.0 40 50 60 70 80 90 Tamb (C) 100 Fig. 8 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 50 100 200 400 1000 10 000 1.3 1.4 1.5 IR MULTIPLIER 0.9 1.0 1.2 Table 5 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4 / EN130300 subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 85 C; UR applied 2000 h C/C: 10 % ESR 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 4.13 Tamb = 85 C; UR and IR applied; 5000 h C/C: 30 % ESR 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit, no visible damage total failure percentage: 3 % Shelf life IEC 60384-4 / EN130300 subclause 4.17 Tamb = 85 C; no voltage applied; 1000 h After test: UR to be applied for 30 min 24 h to 48 h before measurement C/C: 10 % ESR 1.2 x spec. limit IL5 2 x spec. limit Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 14-Oct-16 Document Number: 28392 6 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: MAL209619391E3 MAL209619471E3 MAL209619561E3 MAL209629561E3 MAL209619681E3 MAL209629681E3 MAL209619821E3 MAL209629821E3 MAL209629102E3 MAL209639102E3 MAL209639122E3 MAL209639152E3