FUJITSU MEDIA DEVICE DATA SHEET DS04-23117-6E ASSP Mobile Communication Systems Piezoelectric SAW BPF (700 MHz to 1700 MHz) F5/F6 Series (K2 type) DESCRIPTION The F5/F6-K2 series of SAW band pass filters is available in the 700 MHz-1700 MHz frequency range and exhibit high stability by using single crystal Lithium Tantalate (LiTaO3) with a large electro-mechanical coefficient. The F5/F6-K2 series provides low insertion loss and wide pass-band width by taking advantage of FUJITSU MEDIA DEVICE'S unique "Ladder-type" design. Typical applications for the F5/F6-K2 series include RF interstage filter in mobile communications systems. Standard devices are available for AMPS/TDMA/CDMA,GSM, EGSM,PDC800,J-CDMA,PDC1.5G and so on. If higher attenuation is preferred, our F5-D2 series is also recommended. FEATURES * * * * * Low insertion loss and good skirt performance Compact and light package (3.0 mm sq.) External matching circuits are not required. (50 I/O) Surface mount package (SMT) Standard devices are available for mobile communication standards. PACKAGE F5/F6 Series (K2 type) PIN ASSIGNMENT (BOTTOM VIEW) 1 2 3 6 5 4 PIN DESCRIPTION 2 Pin No. Pin name Description 1 GND 2 IN 3 GND Ground Pin 4 GND Ground Pin 5 OUT Output Pin 6 GND Ground Pin Ground Pin Input Pin F5/F6 Series (K2 type) ABSOLUTE MAXIMUM RATINGS Parameter Rating Symbol Unit Min Max Ta -30 +85 C Tstg -40 +100 C Input level PIN +23 dBm Input DC voltage -5 +5 V Operating temperature Storage temperature WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. RECOMMENDED OPERATING CONDITIONS Parameter Value Symbol Operating temperature Ta Min Max -30 +85 Unit C WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within this range. Always use piezoelectric devices within their recommended operating conditionranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand. STANDARD DEVICES Center frequency (MHz) Band width (MHz) Part symbol Part number Remarks 836.5 25 25 FAR-F5CE-836M50-K225 Low loss type 836.5 25 30 FAR-F5CE-836M50-K230 High Att. type 897.5 35 26 FAR-F5CE-897M50-K226 897.5 35 31 FAR-F5CE-897M50-K231 Low loss type Rx 942.5 35 88 FAR-F5CE-942M50-K288 Low loss type PDC800 (20 MHz pass-band Rx width standard) 820.0 20 04 FAR-F5CE-820M00-K204 High Att. type 906.0 38 19 FAR-F5CE-906M00-K219 906.0 38 15 FAR-F5CE-906M00-K215 906.0 38 38 FAR-F5CE-906M00-K238 Rx 851.0 38 12 FAR-F5CE-851M00-K212 Tx 1441.0 24 20 FAR-F6CE1G4410-K220 Rx 1489.0 24 21 FAR-F6CE1G4890-K221 Lo 1619.0 24 22 FAR-F6CE1G6190-K222 System AMPS/TDMA/CDMA Tx EGSM J-CDMA PDC1.5 G Tx Tx High Att. type 3 F5/F6 Series (K2 type) ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE 1. AMPS/TDMA/CDMA (Tx) Low Loss type Part number : FAR-F5CE-836M50-K225 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Remarks Insertion loss 824 MHz to 849 MHz 2.0 2.5 dB Pass-band ripple 824 MHz to 849 MHz 0.9 1.5 dB DC to 800 MHz 20 23 dB 869 MHz to 894 MHz 28 30 dB 894 MHz to 2000 MHz 22 25 dB 824 MHz to 849 MHz (6.2) 2.6 (7.0) 2.9 () (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 5 dB/ 1 REF 0 dB S11 1U FS 1: 42.77 -21.717 1 : -1.6128 dB 824 MHz 2 : -1.7319 dB 849 MHz 3 : -55.599 dB 869 MHz 4 : -30.788 dB 894 MHz 2 8.894 pF 824.000 000 MHz 2 : 66.051 -12.398 849 MHz 3 : 324.53 -386.41 869 MHz 1 2 3 4 4 : 7.668 -115.35 894 MHz 4 3 CENTER 835 MHz S11 SWR 1/ SPAN 300 MHz S22 REF1 3 CENTER 835 MHz 4 1 1U FS SWR 1/ CENTER 835 MHz 4 2 4.4492 2 : 68.309 -2.4727 849 MHz 3 : 25.938 -188.81 869 MHz 1 4 2 1 : 1.1909 824 MHz 2 : 1.3716 849 MHz 3 : 30.012 869 MHz 4 : 25.196 894 MHz SPAN 300 MHz 859.36 pH 824.000 000 MHz REF1 3 1 1: 57.635 1 : 1.6347 824 MHz 2 : 1.4211 849 MHz 3 : 15.917 869 MHz 4 : 41.316 894 MHz 2 S22 SPAN 300 MHz 4 : 6.6602 -76.531 894 MHz 3 4 CENTER 835 MHz SPAN 300 MHz F5/F6 Series (K2 type) 2. AMPS/TDMA/CDMA (Tx) High Attenuation type Part number : FAR-F5CE-836M50-K230 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 824 MHz to 849 MHz 2.7 3.5 dB Pass-band ripple 824 MHz to 849 MHz 1.0 2.0 dB DC to 800 MHz 28 30 dB 869 MHz to 894 MHz 30 43 dB 894 MHz to 1200 MHz 35 37 dB 1200 MHz to 2000 MHz 20 25 dB 824 MHz to 849 MHz (8.5) 1.7 (11.7) 2.2 () (dB) REF 0 dB S11 Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 5 dB/ 2 1: 4.375 1U FS 2 : 28.668 -8.0127 824 MHz 3 : 52.691 -5.3926 849 MHz CENTER 850 MHz SPAN 300 MHz 4 1 1/ REF1 1 2 3 1/ CENTER 850 MHz 3 S22 SPAN 300 MHz 1: 2.8123 1U FS 1 : 18.129 800 MHz 2 : 1.7663 824 MHz 3 : 1.1915 849 MHz 4 : 12.269 869 MHz SPAN 300 MHz -6.7119 29.64 pF 800.000 000 MHz 2 : 29.701 -8.9658 824 MHz 3 : 51.344 -8.582 849 MHz REF1 4 2 CENTER 850 MHz 1 : 13.196 800 MHz 2 : 1.8107 824 MHz 3 : 1.1266 849 MHz 4 : 5.5493 869 MHz 4 SWR 4 : 234.96 -98.656 869 MHz 4 1 1 S22 10.172 pF 800.000 000 MHz 3 SWR -19.558 1 : -41.423 dB 800 MHz 2 : -3.121 dB 824 MHz 3 : -2.4073 dB 849 MHz 4 : -51.709 dB 869 MHz 3 2 S11 Remarks 1 2 4 : 11.895 -68.445 869 MHz 3 4 CENTER 850 MHz SPAN 300 MHz 5 F5/F6 Series (K2 type) 3. EGSM (Tx) Part number : FAR-F5CE-897M50-K226 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 880 MHz to 915 MHz 2.5 3.5 dB Pass-band ripple 880 MHz to 915 MHz 1.0 2.0 dB DC to 845 MHz 20 23 dB 8 Absolute stop-band attenuation 925 MHz to 935 MHz Pass-band VSWR (Return loss) S21 log MAG 5 dB/ 4.5 7 dB Ta = -30 C to +25 C dB Ta = +25 C to +85 C 935 MHz to 2000 MHz 25 30 dB 880 MHz to 915 MHz (6.8) 2.2 (8.5) 2.7 () (dB) -640.14 m 1 : -40.016 dB 860 MHz 2 : -2.5519 dB 880 MHz 3 : -2.6839 dB 915 MHz 4 : -13.078 dB 925 MHz 3 2 1: 2.4664 1U FS S11 REF 0 dB Remarks 4 860.000 000 MHz 2 : 33.768 -7.4609 880 MHz 3 : 63.193 -18.152 915 MHz 1 4 : 79.777 -88.844 925 MHz 2 3 4 1 CENTER 900 MHz S11 SWR SPAN 300 MHz 1 1/ REF1 S22 SWR 1 2 6 SPAN 300 MHz 1: 4.1191 1U FS 055.42 m 2 : 32.902 -3.5879 880 MHz 3 : 64.594 -19.789 915 MHz REF1 3 1 : 12.145 860 MHz 2 : 1.5335 880 MHz 3 : 1.5362 915 MHz 4 : 4.0924 925 MHz SPAN 300 MHz 10.256 pH 860.000 000 MHz 1 1/ 2 S22 3 4 CENTER 900 MHz CENTER 900 MHz 1 : 20.297 860 MHz 2 : 1.5409 880 MHz 3 : 1.4868 915 MHz 4 : 3.9788 925 MHz 4 289.1 pF 2 4 : 71.008 -87.965 925 MHz 3 4 CENTER 900 MHz SPAN 300 MHz F5/F6 Series (K2 type) 4. EGSM (Tx) Low Loss type Part number : FAR-F5CE-897M50-K231 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 880 MHz to 915 MHz 2.3 3.0 dB Pass-band ripple 880 MHz to 915 MHz 1.0 1.5 dB DC to 800 MHz 17 19 dB 800 MHz to 860 MHz 15 25 dB 925 MHz to 935 MHz 4 dB 935 MHz to 960 MHz 20 25 dB Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 960 MHz to 1850 MHz 20 25 dB 1850 MHz to 3000 MHz 7 12 dB 880 MHz to 915 MHz (8.5) 2.0 (9.5) 2.2 () (dB) log MAG 5 dB/ 4 1: 2.8936 1U FS S11 1 : -34.864 dB 860 MHz 2 : -2.5866 dB 880 MHz 3 : -1.8632 dB 915 MHz 4 : -6.1014 dB 925 MHz 5 : -35.758 dB 935 MHz 3 2 REF 0 dB Remarks -355.1 m 860.000 000 MHz 2 : 27.864 6.6725 824 MHz 3 : 53.119 6.8086 816 MHz 1 2 3 4 : 68.02 28.528 925 MHz 4 1 5 5 : 15.414 67.184 936 MHz 5 SPAN 300 MHz CENTER 900 MHz S11 SWR 1 1/ REF1 5 S22 SWR 1 2 4 3 1/ REF1 5 2 CENTER 900 MHz 3 4 CENTER 900 MHz SPAN 300 MHz 1: 2.6062 1U FS S22 1 : 17.293 860 MHz 2 : 1.9296 880 MHz 3 : 1.1662 915 MHz 4 : 1.7696 925 MHz 5 : 5.3167 935 MHz -2.6616 72.249 pF 860.000 000 MHz 2 : 24.988 1.2344 880 MHz 3 : 52.924 7.0195 816 MHz 1 1 : 19.249 860 MHz 2 : 2.0029 880 MHz 3 : 1.1691 915 MHz 4 : 1.8988 925 MHz 5 : 9.8112 935 MHz SPAN 300 MHz 521.16 pF 2 3 4 5 CENTER 900 MHz 4 : 68.707 32.946 925 MHz 5 : 14.52 68.902 936 MHz SPAN 300 MHz 7 F5/F6 Series (K2 type) 5. EGSM (Rx) Low Loss type Part number : FAR-F5CE-942M50-K288 Parameter Insertion loss Pass-band ripple Conditions 925 MHz to 960 MHz (Ta = -30 C to +85 C) Value Min Typ 2.0 Max dB Ta = +25 C 2 C 2.7 dB Ta = -10 C to +60 C 3.0 dB Ta = -30 C to +85 C 925 MHz to 960 MHz 0.5 1.5 dB DC to 905 MHz 17 18 dB Pass-band VSWR (Return loss) 905 MHz to 915 MHz 8 16 Remarks 2.5 13 Absolute stop-band attenuation Unit 5 dB Ta = +25 C 2 C dB Ta = -10 C to +60 C dB Ta = -30 C to +85 C 980 MHz to 1000 MHz 13 20 dB 1000 MHz to 2000 MHz 20 22 dB 925 MHz to 960 MHz (6.8) 2.2 (8.5) 2.7 () (dB) (Continued) 8 F5/F6 Series (K2 type) (Continued) Part number : FAR-F5CE-942M50-K288 S21 log MAG 5 dB/ 2 S11 REF 0 dB 3 1 1: 19.434 1U FS 1 : -12.943 dB 915 MHz 2 : -2.0159 dB 925 MHz 3 : -1.5033 dB 960 MHz 4 : -22.349 dB 980 MHz 28.751 5.0009 nH 915.000 000 MHz 2 : 29.646 -79.102 m 925 MHz 1 3 : 48.006 -4.0664 960 MHz 4 2 3 4 : 42.625 -97.496 980 MHz 4 CENTER 950 MHz S11 SPAN 300 MHz 1/ SWR REF1 4 1 2 S22 1/ SWR 3 CENTER 950 MHz 2 3 S22 SPAN 300 MHz 1: 41.318 1U FS 1 : 3.6211 915 MHz 2 : 1.6872 925 MHz 3 : 1.1022 960 MHz 4 : 6.3271 980 MHz 11.084 2 : 28.769 -198.24 m 925 MHz 1 3 : 47.871 -7.6563 960 MHz 2 1 : 1.4234 915 MHz 2 : 1.7385 925 MHz 3 : 1.1792 960 MHz 4 : 6.8501 980 MHz SPAN 300 MHz 1.9279 nH 915.000 000 MHz REF1 4 1 CENTER 950 MHz 4 : 31.156 -88.191 980 MHz 3 4 CENTER 950 MHz SPAN 300 MHz 9 F5/F6 Series (K2 type) 6. PDC800 (Rx) High Attenuation type Part number : FAR-F5CE-820M00-K204 Parameter (Ta = -30 C to +85 C) Value Conditions Min Typ Max Unit Insertion loss 810 MHz to 830 MHz 3.0 3.5 dB Pass-band ripple 810 MHz to 830 MHz 1.5 2.0 dB DC to 130 MHz 35 41 dB 130 MHz to 760 MHz 30 34 dB 855 MHz to 875 MHz 35 38 dB 875 MHz to 1090 MHz 33 38 dB 1090 MHz to 2000 MHz 30 38 dB 810 MHz to 830 MHz (7.4) 2.0 (9.5) 2.5 () (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 5 dB/ 1 S11 REF 0 dB 1: 43.031 1U FS -5.8691 1 : -2.5198 dB 810 MHz 2 : -2.7362 dB 830 MHz 3 : -38.419 dB 940 MHz 4 : -38.349 dB 960 MHz 2 33.478 pF 810.000 000 MHz 2 : 68.773 -24.227 830 MHz 3: 1 6.707 -61.85 940 MHz 4 : 6.4629 -58.676 960 MHz 2 3 Remarks 4 43 CENTER 820 MHz S11 SPAN 300 MHz SWR 1/ 1 2 CENTER 820 MHz 10 SPAN 300 MHz 1: 47.096 1U FS 3 4 1 : 1.2172 810 MHz 2 : 1.6789 830 MHz 3 : 18.934 940 MHz 4 : 18.46 960 MHz 2 1/ SWR S22 REF1 1 S22 CENTER 820 MHz 30.43 pF 810.000 000 MHz 2 : 72.691 -28.836 830 MHz 3 : 4.2344 -32.693 940 MHz 1 REF1 3 4 1 : 1.1592 810 MHz 2 : 1.8231 830 MHz 3 : 16.88 940 MHz 4 : 16.925 960 MHz SPAN 300 MHz -6.457 2 4 : 4.0957 -31.028 960 MHz 43 CENTER 820 MHz SPAN 300 MHz F5/F6 Series (K2 type) 7. J-CDMA (Tx) Part number : FAR-F5CE-906M00-K219 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 887 MHz to 925 MHz 2.7 3.7 dB Pass-band ripple 887 MHz to 925 MHz 1.0 2.2 dB DC to 720 MHz 20 22 dB 720 MHz to 800 MHz 20 23 dB 832 MHz to 870 MHz 32 33 dB 940 MHz to 942 MHz 15 25 dB 942 MHz to 950 MHz 20 30 dB 950 MHz to 2000 MHz 20 23 dB 2000 MHz to 3000 MHz 15 17 dB 887 MHz to 925 MHz (6.8) 2.2 (8.5) 2.7 () (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) Remarks (Continued) 11 F5/F6 Series (K2 type) (Continued) Part number : FAR-F5CE-906M00-K219 S21 log MAG 5 dB/ 2 REF 0 dB S11 1 : -39.716 dB 870 MHz 2 : -2.6918 dB 887 MHz 3 : -2.1755 dB 925 MHz 4 : -22.053 dB 940 MHz 3 1: 3.416 1U FS 3.3799 618.3 pH 870.000 000 MHz 2 : 43.385 -10.713 887 MHz 1 3 : 56.156 -9.832 925 MHz 4 2 3 4 : 31.719 -82.156 940 MHz 1 4 CENTER 900 MHz S11 SWR SPAN 300 MHz 1 1/ S22 SWR 1 1/ 2 12 1: 3.2349 1U FS -409.91 m 2 : 31.036 0.1445 887 MHz 3 : 56.93 -9.8203 925 MHz 1 2 1 : 15.453 870 MHz 2 : 1.6113 887 MHz 3 : 1.2532 925 MHz 4 : 7.11 940 MHz SPAN 300 MHz 446.28 pF 870.000 000 MHz REF 1 3 SPAN 300 MHz 1 : 14.702 870 MHz 2 : 1.3179 887 MHz 3 : 1.245 925 MHz 4 : 6.3226 940 MHz 3 2 4 CENTER 900 MHz S22 REF 1 4 CENTER 900 MHz 4 : 28.336 -83.324 940 MHz 3 4 CENTER 900 MHz SPAN 300 MHz F5/F6 Series (K2 type) 8. J-CDMA (Tx) High Attenuation type Part number : FAR-F5CE-906M00-K215 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 887 MHz to 925 MHz 3.0 4.5 dB Pass-band ripple 887 MHz to 925 MHz 1.5 3.0 dB DC to 720 MHz 25 26 dB 720 MHz to 800 MHz 25 30 dB 832 MHz to 870 MHz 30 35 dB 940 MHz to 942 MHz 20 25 dB 942 MHz to 950 MHz 25 30 dB 950 MHz to 2000 MHz 20 25 dB 2000 MHz to 3000 MHz 15 20 dB 887 MHz to 925 MHz (5.1) 3.0 (6.0) 3.5 () (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) Remarks (Continued) 13 F5/F6 Series (K2 type) (Continued) Part number : FAR-F5CE-906M00-K215 S21 log MAG 5 dB/ 3 REF 0 dB 4 1: 2.689 1U FS S11 1 : -46.292 dB 832 MHz 2 : -40.706 dB 870 MHz 3 : -2.5794 dB 887 MHz 4 : -3.6692 dB 925 MHz 5 : -37.56 dB 940 MHz -12.27 16.69 pF 832.000 000 MHz 2 : 3.8438 9.0098 870 MHz 2 3 : 40.461 4.2715 887 MHz 3 4 : 54.449 22.648 925 MHz 4 1 5 : 11.408 56.516 940 MHz 5 1 2 5 SPAN 300 MHz CENTER 900 MHz S11 SWR 1 1/ REF1 2 5 S22 SWR 3 1 4 1/ REF1 5 2 CENTER 900 MHz 14 3 4 CENTER 900 MHz 1 : 28.286 832 MHz 2 : 14.72 870 MHz 3 : 1.3669 887 MHz 4 : 1.5923 925 MHz 5 : 11.252 940 MHz SPAN 300 MHz 1: 2.0361 1U FS S22 1 : 19.717 832 MHz 2 : 13.434 870 MHz 3 : 1.2611 887 MHz 4 : 1.5567 925 MHz 5 : 10.117 940 MHz SPAN 300 MHz -13.292 14.391 pF 832.000 000 MHz 2 : 3.5034 8.8626 870 MHz 3 : 36.801 2.4824 887 MHz 2 3 1 4 5 CENTER 900 MHz 4 : 56.646 24.078 925 MHz 5 : 10.123 55.98 940 MHz SPAN 300 MHz F5/F6 Series (K2 type) 9. J-CDMA (Tx) Part number : FAR-F5CE-906M00-K238 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 887 MHz to 925 MHz 2.7 4.0 dB Pass-band ripple 887 MHz to 925 MHz 1.0 2.3 dB DC to 720 MHz 23 25 dB 720 MHz to 800 MHz 25 27 dB 832 MHz to 870 MHz 37 40 dB 940 MHz to 942 MHz 15 23 dB 942 MHz to 950 MHz 20 28 dB 950 MHz to 2000 MHz 25 30 dB 2000 MHz to 3000 MHz 20 25 dB 887 MHz to 925 MHz (5.6) 2.2 (8.5) 3.2 () (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) Remarks (Continued) 15 F5/F6 Series (K2 type) (Continued) Part number : FAR-F5CE-906M00-K238 S21 log MAG 5 dB/ 1: 1.8677 1U FS S11 1 : -41.253 dB 832 MHz 2 : -48.17 dB 870 MHz 3 : -2.6208 dB 887 MHz 4 : -2.4256 dB 925 MHz 5 : -27.508 dB 940 MHz 4 3 REF 0 dB -14.857 832.000 000 MHz 2 : 3.0369 3.521 870 MHz 3 : 44.107 -5.9004 887 MHz 2 3 5 4 4 : 54.916 -12.906 925 MHz 1 1 5 : 20.363 -72.578 940 MHz 5 CENTER 900 MHz S11 SWR 2 SPAN 300 MHz 1 1/ 2 5 S22 SWR 3 1 1/ 5 CENTER 900 MHz 16 3 4 SPAN 300 MHz 1: 2.25 1U FS -14.564 1 : 29.134 832 MHz 2 : 16.546 870 MHz 3 : 1.1948 887 MHz 4 : 1.3015 925 MHz 5 : 7.9264 940 MHz 4 REF1 2 CENTER 900 MHz S22 REF1 SPAN 300 MHz 13.135 pF 832.000 000 MHz 2 : 3.4901 3.7628 870 MHz 3 : 38.686 -2.4785 887 MHz 2 1 : 24.097 832 MHz 2 : 14.402 870 MHz 3 : 1.3005 887 MHz 4 : 1.2912 925 MHz 5 : 8.0814 940 MHz 12.876 pF 3 4 4 : 56.012 -12.115 925 MHz 1 5 CENTER 900 MHz 5 : 18.953 -70.027 940 MHz SPAN 300 MHz F5/F6 Series (K2 type) 10. J-CDMA (Rx) Part number : FAR-F5CE-851M00-K212 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 832 MHz to 870 MHz 2.5 3.5 dB Pass-band ripple 832 MHz to 870 MHz 1.0 2.0 dB DC to 170 MHz 20 24 dB 170 MHz to 720 MHz 18 20 dB 720 MHz to 770 MHz 20 22 dB 770 MHz to 815 MHz 25 27 dB 818 MHz 15 40 dB 887 MHz to 897 MHz 20 30 dB 897 MHz to 925 MHz 23 25 dB 925 MHz to 1100 MHz 22 24 dB 1100 MHz to 2000 MHz 20 24 dB 832 MHz to 870 MHz -- (6.0) 2.7 (6.8) 3.0 () (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) Remarks (Continued) 17 F5/F6 Series (K2 type) (Continued) Part number : FAR-F5CE-851M00-K212 S21 log MAG 5 dB/ REF 0 dB 2 S11 1.4034 273.06 pH 818.000 000 MHz 1 : -37.899 dB 818 MHz 2 : -2.5981 dB 832 MHz 3 : -1.9478 dB 870 MHz 4 : -27.923 dB 887 MHz 3 1: 3.2582 1U FS 2 : 38.836 -7.2578 832 MHz 3 : 58.682 -10.117 870 MHz 1 2 4 4 : 29.48 -92.918 887 MHz 3 1 4 SPAN 300 MHz CENTER 850 MHz S11 SWR 1 1/ S22 REF1 4 CENTER 850 MHz SPAN 300 MHz 1: 2.9063 1U FS -13.55 m 1 : 15.373 818 MHz 2 : 1.3511 832 MHz 3 : 1.2786 870 MHz 4 : 8.0246 887 MHz 818.000 000 MHz 2 : 31.507 -1.1172 832 MHz 3 : 58.508 -10.055 870 MHz 1 S22 SWR 1 2 1/ 3 REF1 4 CENTER 850 MHz 18 2 3 2 1 : 17.221 818 MHz 2 : 1.5883 832 MHz 3 : 1.2753 870 MHz 4 : 8.4626 887 MHz SPAN 300 MHz 14.359 nF 3 4 : 25.703 -88.59 887 MHz 4 CENTER 850 MHz SPAN 300 MHz F5/F6 Series (K2 type) 11. PDC1.5 G (Tx) High Attenuation type Part number : FAR-F6CE-1G4410-K220 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 1429 MHz to 1453 MHz 2.2 3.0 dB Pass-band ripple 1429 MHz to 1453 MHz 1.0 2.0 dB DC to 1380 MHz 25 27 dB 1477 MHz to 1501 MHz 10 18 dB 1501 MHz to 1900 MHz 30 32 dB 1900 MHz to 2906 MHz 18 28 dB 1429 MHz to 1453 MHz (7.4) 2.1 (9.0) 2.5 () (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 5 dB/ 2 S11 REF 0 dB 1: 4.4395 1U FS Remarks -32.887 1 : -35.074 dB 1.380 GHz 2 : -1.3018 dB 1.429 GHz 3 : -2.0664 dB 1.453 GHz 4 : -20.902 dB 1.477 GHz 3 3.5069 pF 1.380 GHz 2 : 46.01 -4.3555 1.429 GHz 4 3 2 1 4 3 : 77.621 -5.6797 1.453 GHz 4 : 609.53 -187.66 1.477 GHz 1 SPAN 400 MHz CENTER 1 500 MHz S11 SWR 1 1/ SWR 1 2 1: 3.8748 2 : 49.662 -3.1699 1.429 GHz REF1 2 1 : 12.906 1.380 GHz 2 : 1.066 1.429 GHz 3 : 1.5587 1.453 GHz 4 : 9.3208 1.477 GHz SPAN 400 MHz -635.86 m 181.37 pF 1.380 GHz 1 1/ 23 1U FS SPAN 400 MHz 1 : 16.156 1.380 GHz 2 : 1.1309 1.429 GHz 3 : 1.5665 1.453 GHz 4 : 13.351 1.477 GHz 3 4 CENTER 1 500 MHz S22 REF1 4 S22 CENTER 1 500 MHz 3 3 : 72.906 -14.336 1.453 GHz 4 : 11.416 -52.465 1.477 GHz 4 CENTER 1 500 MHz SPAN 400 MHz 19 F5/F6 Series (K2 type) 12. PDC1.5 G (Rx) High Attenuation type Part number : FAR-F6CE-1G4890-K221 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 1477 MHz to 1501 MHz 2.5 3.0 dB Pass-band ripple 1477 MHz to 1501 MHz 1.0 2.0 dB DC to 1429 MHz 25 28 dB 1429 MHz to 1453 MHz 10 25 dB 1542 MHz to 1566 MHz 20 28 dB 1566 MHz to 1900 MHz 30 33 dB 1900 MHz to 3000 MHz 20 29 dB 1477 MHz to 1501 MHz (6.8) 2.4 (7.7) 2.7 () (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 5 dB/ REF 0 dB 1: 4.9717 1U FS -19.226 1 : -25.931 dB 1.453 GHz 2 : -2.1466 dB 1.477 GHz 3 : -1.8281 dB 1.501 GHz 4 : -38.274 dB 1.542 GHz 3 2 S11 Remarks 5.6974 pF 1.453 GHz 2 : 40.439 -589.84 m 1.477 GHz 3 : 52.203 -5.0625 1.501 GHz 1 2 3 1 4 4 : 43.008 -226.07 1.542 GHz 4 CENTER 1 500 MHz S11 SWR SPAN 400 MHz 1 1/ 2 S22 SWR 1/ 4 20 2 1 : 11.557 1.453 GHz 2 : 1.2368 1.477 GHz 3 : 1.1141 1.501 GHz 4 : 25.752 1.542 GHz SPAN 400 MHz 1 : 7.0498 1U FS 3 2.3061 nH 2 : 43.646 -2.9531 1.477 GHz 1 3 : 48.85 -10.762 1.501 GHz 23 1 : 8.3687 1.453 GHz 2 : 1.1616 1.477 GHz 3 : 1.2443 1.501 GHz 4 : 5.5603 1.542 GHz SPAN 400 MHz 21.054 1.453 GHz 3 REF 1 1 CENTER 1 500 MHz S22 REF 1 4 CENTER 1 500 MHz 4 : 16.373 -43.947 1.542 GHz 4 CENTER 1 500 MHz SPAN 400 MHz F5/F6 Series (K2 type) 13. PDC1.5 G (Lo) Part number : FAR-F6CE-1G6190-K222 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 1607 MHz to 1631 MHz 2.4 3.3 dB Pass-band ripple 1607 MHz to 1631 MHz 1.0 2.0 dB DC to 130 MHz 30 38 dB 130 MHz to 1501 MHz 25 28 dB 1737 MHz to 1809 MHz 30 35 dB 1809 MHz to 2500 MHz 25 35 dB 3214 MHz 20 30 dB 1607 MHz to 1631 MHz (9.5) 1.8 (10.9) 2.0 () (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 5 dB/ 2 REF 0 dB S11 1: 2.2588 1U FS Remarks -16.415 1 : -43.509 dB 1.501 GHz 2 : -2.9735 dB 1.607 GHz 3 : -2.0366 dB 1.631 GHz 4 : -42.287 dB 1.73 GHz 3 6.4595 pF 1.501 GHz 2 : 43.58 -4.7715 1.607 GHz 3 : 39.982 -19.486 1.631 GHz 2 4 : 4.5664 -36.547 1.73 GHz 3 1 1 4 SPAN 400 MHz CENTER 1 600 MHz S11 SWR 1 1/ REF1 4 4 CENTER 1 600 MHz S22 SPAN 400 MHz 1: 2.3193 1U FS 1 : 24.505 1.501 GHz 2 : 1.1866 1.607 GHz 3 : 1.6246 1.631 GHz 4 : 16.821 1.73 GHz S22 SWR 1 3 2 1/ REF1 CENTER 1 600 MHz 2 7.7142 pF 1.501 GHz 2 : 45.201 -2.5645 1.607 GHz 4 1 : 23.181 1.501 GHz 2 : 1.1212 1.607 GHz 3 : 1.6422 1.631 GHz 4 : 17.994 1.73 GHz -13.745 2 3 1 3 : 36.947 -17.137 1.631 GHz 4 : 4.209 -35.818 1.73 GHz 4 3 SPAN 400 MHz CENTER 1 600 MHz SPAN 400 MHz 21 F5/F6 Series (K2 type) MEASURMENT CIRCUIT 5 2 1 3 4 6 1 to 6: Pin number PART NUMBER DESIGNATION [Designation example] FAR-F CE(1) (2) (1) Frequency range -K2 (3) (4) (5) : 5 : 700 MHz to 1000 MHz 6 : 1000 MHz to 1700 MHz (2) Package size : E : 3.0 mm x 3.0 mm x 1.2 mm (3) Frequency : This specifies the nominal center frequency using six alphanumeric. M (for MHz) or G (for GHz) indicates the decimal point. [Example] 906.0 MHz 906M00 1.441GHz 1G4410 (4) Part symbol : Numbers specified by FUJITSU MEDIA DEVICE Refer to "STANDARD DEVICES". (5) Packing (Reeled tape) : Y : 1 k pcs/reel X : 5 k pcs/reel 22 F5/F6 Series (K2 type) MARKING *LOGO DATE CODE PART SYMBOL F 11 B 1 LOT No. INDEX *: For the following parts, "K" is marked in place of "F". FAR-F5CE-836M50-K230 FAR-F5CE-897M50-K231 FAR-F5CE-906M50-K238 23 F5/F6 Series (K2 type) PACKAGE DIMENSION 1.2 Max. 3.0 3.0 3 0.75 2 1.5 1 4 0.75 2-R 0.2 0.4 0.6 6 5 4-R 0.3 1.2 1.2 Dimensions in mm. 24 F5/F6 Series (K2 type) RECOMMENDED LAND PATTERN 1.5 3.0 0.75 0.95 3.0 0.2 0.75 1.5 0.70 1.20 1.20 Dimensions in mm. 25 F5/F6 Series (K2 type) PACKING 1. Reel Dimensions 9.5 0.5 1.5 Min 250 80 12.8 Min 20.2 Min Type Volume Y 1 k pcs X 5 k pcs R0.58 13.8 Max Dimensions in mm. 2. Packing Style Reel side Pulling side 1P IN Pulling side 26 F5/F6 Series (K2 type) 3. Tape Dimensions 0.3 0.05 0.1 3.3 0.1 3.5 0.05 1.5 0.0 1.0 Min. 3.3 0.1 8.0 0.2 2.0 0.05 1.75 0.1 4.0 0.1 1.3 0.1 4.0 0.1 Dimensions in mm. 4. Peel strength of top cover tape Peel off by the force of 0.1 N to 1.0 N under the condition at the right. (Conforms to EIA) Direction of pulling Speed 300 mm/min 165 to 180 Embossment carrier type tape 27 F5/F6 Series (K2 type) RECOMMENDED REFLOW PROFILE 240 Temperature (C) 10 s Heating rate 1C/s to 4C/s 210 Air cooling 60 s Pre-Heating 150 60 s 90 s Time (s) NOTE A mass-produced product order is accepted by a unit of 1000. 28 F5/F6 Series (K2 type) FUJITSU MEDIA DEVICES LIMITED All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU MEDIA DEVICES sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MEDIA DEVICES electronic device; FUJITSU MEDIA DEVICES does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MEDIA DEVICES assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MEDIA DEVICES or any third party or does FUJITSU MEDIA DEVICES warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MEDIA DEVICES assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU MEDIA DEVICES will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any electronic devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. F0308 FUJITSU LIMITED Printed in Japan