NT Features Agency recognition: IA PL M oH S CO R1 01810 0T *R Applications Radial Leaded Devices Cured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements RoHS compliant* T V Rheinland Almost anywhere there is a low voltage power supply and a load to be protected, including: Computers & peripherals General electronics Automotive applications MF-R Series - PTC Resettable Fuses Electrical Characteristics Ihold Model MF-R005** MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 V max. Volts I max. Amps 60 60 60 60 60 60 60 60 60 60 60 30 30 30 30 30 30 30 30 30 30 30 30 30 30 16 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 100 Itrip Amperes at 23 C Hold Trip 0.05 0.10 0.17 0.20 0.25 0.30 0.40 0.50 0.65 0.75 0.90 0.90 1.10 1.35 1.60 1.85 2.50 2.50 3.00 4.00 5.00 6.00 7.00 8.00 9.00 11.00 0.10 0.20 0.34 0.40 0.50 0.60 0.80 1.00 1.30 1.50 1.80 1.80 2.20 2.70 3.20 3.70 5.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 22.00 Initial Resistance Ohms at 23 C Min. Max. 7.3 2.50 2.00 1.50 1.00 0.76 0.52 0.41 0.27 0.18 0.14 0.07 0.10 0.065 0.055 0.040 0.025 0.025 0.020 0.010 0.010 0.005 0.005 0.005 0.005 0.003 11.1 4.50 3.20 2.84 1.95 1.36 0.86 0.77 0.48 0.40 0.31 0.12 0.18 0.115 0.105 0.07 0.048 0.048 0.05 0.03 0.03 0.02 0.02 0.02 0.01 0.01 1 Hour (R1) Post-Trip Resistance Ohms at 23 C Max. 22.0 7.50 8.00 4.40 3.00 2.10 1.29 1.17 0.72 0.60 0.47 0.22 0.27 0.17 0.15 0.11 0.07 0.07 0.08 0.05 0.05 0.04 0.03 0.03 0.02 0.014 Max. Time To Trip Amperes at 23 C 0.5 0.5 0.85 1.0 1.25 1.5 2.0 2.5 3.25 3.75 4.5 4.5 5.5 6.75 8.0 9.25 12.5 12.5 15.0 20.0 25.0 30.0 35.0 40.0 45.0 40.0 Tripped Power Dissipation Seconds at 23 C 5.0 4.0 3.0 2.2 2.5 3.0 3.8 4.0 5.3 6.3 7.2 5.9 6.6 7.3 8.0 8.7 10.3 10.3 10.8 12.7 14.5 16.0 17.5 18.8 ***20.0 20.0 **CSA approval pending. Watts at 23 C Typ. 0.22 0.38 0.48 0.40 0.45 0.50 0.55 0.75 0.90 0.90 1.00 0.60 0.70 0.80 0.90 1.00 1.20 1.20 2.00 2.50 3.00 3.50 3.80 4.00 4.20 4.50 ***Tested at 40 amps Environmental Characteristics Operating/Storage Temperature ........................-40 C to +85 C Maximum Device Surface Temperature in Tripped State ................................................125 C Passive Aging......................................................+85 C, 1000 hours ....................................5 % typical resistance change Humidity Aging....................................................+85 C, 85 % R.H. 1000 hours....................5 % typical resistance change Thermal Shock ....................................................-40 C to +85 C, 10 times ..........................10 % typical resistance change Solvent Resistance ............................................MIL-STD-202, Method 215 ........................No change Vibration ..............................................................MIL-STD-883C, Method 2007.1, ................No change Condition A Test Procedures And Requirements For Model MF-R Series Test Test Conditions Accept/Reject Criteria Visual/Mech. ......................................................Verify dimensions and materials..................Per MF physical description Resistance ..........................................................In still air @ 23 C ........................................Rmin R Rmax Time to Trip ........................................................5 times Ihold, Vmax, 23 C..........................T max. time to trip (seconds) Hold Current ......................................................30 min. at Ihold............................................No trip Trip Cycle Life ....................................................Vmax, Imax, 100 cycles ..............................No arcing or burning Trip Endurance....................................................Vmax, 48 hours ..........................................No arcing or burning UL File Number ..................................................E 174545S CSA File Number ................................................CA 110338 TUV File Number ................................................R2057213 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Product manufactured with a date code later than April 1, 2005 is RoHS compliant. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Additional Features Bulk packaging, tape and reel and Ammo-Pak available on most models Patents pending MF-R Series - PTC Resettable Fuses Product Dimensions (see next page for outline drawing) Model MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 A Max. 8.0 (0.315) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.9 (0.311) 9.7 (0.382) 10.4 (0.409) 11.7 (0.461) 7.4 (0.291) 8.9 (0.350) 8.9 (0.350) 10.2 (0.402) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 14.4 (0.567) 17.4 (0.685) 19.3 (0.760) 22.1 (0.870) 24.2 (0.953) 24.2 (0.953) 24.2 (0.953) B Max. 8.3 (0.327) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 13.4 (0.528) 13.7 (0.539) 13.7 (0.539) 15.2 (0.598) 16.0 (0.630) 16.7 (0.657) 12.2 (0.480) 14.0 (0.551) 18.9 (0.744) 16.8 (0.661) 18.4 (0.724) 18.3 (0.720) 18.3 (0.720) 18.3 (0.720) 24.8 (0.976) 24.9 (0.980) 31.9 (1.256) 29.8 (1.173) 32.9 (1.295) 32.9 (1.295) 32.9 (1.295) C Nom. 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) Tol. 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) D Min. 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) E Max. 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) Physical Characteristics Style Lead Dia. Material 0.405 4 Sn/NiCu (0.016) 0.51 1 Sn/NiCu (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 3 Sn/CuFe (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.81 2 Sn/Cu (0.032) 0.51 3 Sn/CuFe (0.020) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) Packaging options: BULK: All models = 500 pcs. per bag. TAPE & REEL: MF-R005-MF-R160 - 12.7 mm device pitch = 3000 pcs. per reel; MF-R185-MF-R400 - 25.4mm device pitch = 1500 pcs. per reel; MF-R250-0-10 = 1500 pcs. per reel. AMMO-PACK: MF-R005-MF-R160 - 12.7 mm device pitch = 2000 pcs. per reel; MF-R185-MF-R400 - 25.4 mm device pitch = 1000 pcs. per reel; MF-R090-0-9 & MF-R250-0-10 = 2000 pcs. per reel. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. DIMENSIONS = 0.405 (26AWG) 0.51 (24AWG) 0.81 (20AWG) MM (INCHES) MF-R Series - PTC Resettable Fuses Product Dimensions (see previous page for dimensions) Style 1 Style 2 A E Style 3 A Style 4 A E B B A E B E B D C D D D C C C NOTE: Kinked lead option is available for board standoff. Contact factory for details. NOTE: Also available with straight leads. Contact factory for details. Thermal Derating Chart - Ihold / Itrip (Amps) Ambient Operating Temperature Model MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 -40 C 0.08 / 0.16 0.16 / 0.32 0.26 / 0.52 0.31 / 0.62 0.39 / 0.78 0.47 / 0.94 0.62 / 1.24 0.78 / 1.56 1.01 / 2.02 1.16 / 2.32 1.40 / 2.80 1.40 / 2.80 1.60 / 3.20 1.96 / 3.92 2.32 / 4.64 2.68 / 5.36 3.63 / 7.26 3.63 / 7.26 4.35 / 8.70 5.80 / 11.6 7.25 / 14.5 8.70 / 17.4 10.1 / 20.3 11.6 / 23.2 13.0 / 26.1 16.1 / 32.0 -20 C 0.07 / 0.14 0.14 / 0.28 0.23 / 0.46 0.27 / 0.54 0.34 / 0.68 0.41 / 0.82 0.54 / 1.08 0.68 / 1.36 0.88 / 1.76 1.02 / 2.04 1.22 / 2.44 1.22 / 2.44 1.43 / 2.86 1.76 / 3.52 2.08 / 4.16 2.41 / 4.82 3.25 / 6.50 3.25 / 6.50 3.90 / 7.80 5.20 / 10.4 6.50 / 13.0 7.80 / 15.6 9.10 / 18.2 10.4 / 20.8 11.7 / 23.4 14.6 / 29.2 0 C 0.06 / 0.12 0.12 / 0.24 0.20 / 0.40 0.24 / 0.48 0.30 / 0.60 0.36 / 0.72 0.48 / 0.96 0.60 / 1.20 0.77 / 1.54 0.89 / 1.78 1.07 / 2.14 1.07 / 2.14 1.27 / 2.54 1.55 / 3.10 1.84 / 3.68 2.13 / 4.26 2.88 / 5.76 2.88 / 5.76 3.45 / 6.90 4.60 / 9.20 5.75 / 11.5 6.90 / 13.8 8.05 / 16.1 9.20 / 18.4 10.3 / 20.7 13.1 / 26.2 23 C 0.05 / 0.10 0.10 / 0.20 0.17 / 0.34 0.20 / 0.40 0.25 / 0.50 0.30 / 0.60 0.40 / 0.80 0.50 / 1.00 0.65 / 1.30 0.75 / 1.50 0.90 / 1.80 0.90 / 1.80 1.10 / 2.20 1.35 / 2.70 1.60 / 3.20 1.85 / 3.70 2.50 / 5.00 2.50 / 5.00 3.00 / 6.00 4.00 / 8.00 5.00 / 10.0 6.00 / 12.0 7.00 / 14.0 8.00 / 16.0 9.00 / 18.0 11.0 / 22.1 40 C 0.04 / 0.08 0.08 / 0.16 0.14 / 0.28 0.16 / 0.32 0.20 / 0.40 0.24 / 0.48 0.32 / 0.64 0.41 / 0.82 0.53 / 1.06 0.61 / 1.22 0.73 / 1.46 0.73 / 1.46 0.91 / 1.82 1.12 / 2.24 1.33 / 2.66 1.54 / 3.08 2.08 / 4.16 2.08 / 4.16 2.49 / 4.98 3.32 / 6.64 4.15 / 8.30 4.98 / 9.96 5.81 / 11.6 6.64 / 13.2 7.47 / 14.9 9.40 / 18.4 50 C 0.04 / 0.08 0.07 / 0.14 0.12 / 0.24 0.14 / 0.28 0.18 / 0.36 0.22 / 0.44 0.29 / 0.58 0.36 / 0.72 0.47 / 0.94 0.54 / 1.08 0.65 / 1.30 0.65 / 1.30 0.85 / 1.70 1.04 / 2.08 1.23 / 2.46 1.42 / 2.84 1.93 / 3.86 1.93 / 3.86 2.31 / 4.62 3.08 / 6.16 3.85 / 7.70 4.62 / 9.24 5.39 / 10.7 6.16 / 12.3 6.93 / 12.7 8.80 / 17.6 60 C 0.03 / 0.07 0.06 / 0.12 0.11 / 0.22 0.13 / 0.26 0.16 / 0.32 0.19 / 0.38 0.25 / 0.50 0.32 / 0.64 0.41 / 0.82 0.47 / 0.94 0.57 / 1.14 0.57 / 1.14 0.75 / 1.50 0.92 / 1.84 1.09 / 2.18 1.26 / 2.52 1.70 / 3.40 1.70 / 3.40 2.04 / 4.08 2.72 / 5.44 3.40 / 6.80 4.08 / 8.16 4.76 / 9.52 5.44 / 10.8 6.12 / 12.2 7.80 / 15.6 70 C 0.03 / 0.07 0.05 / 0.10 0.09 / 0.18 0.11 / 0.22 0.14 / 0.28 0.16 / 0.32 0.22 / 0.44 0.27 / 0.54 0.35 / 0.70 0.41 / 0.82 0.49 / 0.98 0.49 / 0.98 0.67 / 1.34 0.82 / 1.64 0.98 / 1.96 1.13 / 2.26 1.53 / 3.06 1.53 / 3.06 1.83 / 3.66 2.44 / 4.88 3.05 / 6.10 3.66 / 7.32 4.27 / 9.44 4.88 / 9.76 5.49 / 10.9 6.90 / 13.8 85 C 0.02 / 0.05 0.04 / 0.08 0.07 / 0.14 0.08 / 0.16 0.10 / 0.20 0.12 / 0.24 0.16 / 0.32 0.20 / 0.40 0.26 / 0.52 0.30 / 0.60 0.36 / 0.72 0.36 / 0.72 0.57 / 1.14 0.70 / 1.40 0.83 / 1.66 0.96 / 1.92 1.30 / 2.60 1.30 / 2.60 1.56 / 3.12 2.08 / 4.16 2.60 / 5.20 3.12 / 6.24 3.64 / 7.28 4.16 / 8.32 4.68 / 9.36 5.20 / 10.4 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MF-R Series - PTC Resettable Fuses How to Order Typical Time to Trip at 23 C MF -R MF 005 -R0 10 MF -R0 MF 17 -R MF 020 -R MF 025 -R MF 030 -R MF 040 -R MF 050 -R MF 065 -R MF 075 -R0 90 MF - R 110 - 0 - 99 Multifuse(R) Product Designator Series R = Radial Leaded Component Hold Current, Ihold 005-1100 (0.05 Amps - 11.0 Amps) Packaging Options - __ = Bulk Packaging without part number suffix option - 0-99 = Bulk Packaging with part number suffix option Time to trip (Seconds) 100 - 2 = Tape and Reel without part number suffix option* - 2-99 = Tape and Reel with part number suffix option 10 - AP = Ammo-Pak* - 0-14 = Kinked leads where straight leads are standard 1 - 0-17 = Straight leads where kinked leads are standard 0.1 Part Number Suffix Option - 99 = As of date code April 1, 2005 all MF-R models are RoHS compliant. The suffix "-99" can be used if a new part number is required to reference the RoHS compliance. 0.01 0.001 0.1 1 10 100 MF -0--R09 9 0 MF -R MF 110 -R MF 135 -R MF 160 -R MF 185 -R 250 250, -0 MF -10 -R3 MF 00 -R MF 400 -R MF 500 -R MF 600 -R7 MF 00 -R MF 800 -R MF 900 -R1 100 Fault Current (Amps) Examples: MF-R110 ................Bulk packaging MF-R110-0-99 ......Bulk packaging with part number suffix option MF-R110-2 ............Tape and reel packaging MF-R110-2-99 ......Tape and reel packaging with part number suffix option MF-R090-0-9-99 ....Bulk packaging with part number suffix option MF-R250-0-10-99 ..Bulk packaging with part number suffix option *Packaged per EIA486-B Typical Part Marking: MF-R005 - R025 Represents total content. Layout may vary. Time to trip (Seconds) 100 PART IDENTIFICATION MANUFACTURER'S TRADEMARK 10 1 025 0A DATE CODE: WEEK 1 OF 2000 = 0A (YEAR & WEEK) WEEK 27 OF 2000 = A0 (WEEK & YEAR) Typical Part Marking: MF-R030 - R1100 Represents total content. Layout may vary. 0.1 0.01 PART IDENTIFICATION 0.001 1 10 Fault Current (Amps) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 100 DATE CODE (FIRST DIGIT = LAST DIGIT OF YEAR; NEXT THREE DIGITS = DAY OF YEAR) MANUFACTURER'S TRADEMARK R250 0180T LOT NO. (T = TAIWAN S = CHINA) MF-R SERIES, REV. W, 04/08 MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications Devices taped using EIA468-B/IEC286-2 standards. See table below and Figures 1 and 2 for details. Dimension Description IEC Mark EIA Mark Carrier tape width W W Hold down tape width: W0 W4 Hold down tape Top distance between tape edges Dimensions Dimensions Tolerance 18 (.709) 11 (.433) min. No protrusion W2 W6 Sprocket hole position W1 W5 Sprocket hole diameter D0 D0 Abscissa to plane (straight lead) H H Abscissa to plane (kinked lead) H0 H0 Abscissa to top (straight lead) H1 H1 Abscissa to top (kinked lead) H1 H1 Overall width w/lead protrusion (straight lead) C1 Overall width w/lead protrusion (kinked lead) C1 Overall width w/o lead protrusion (straight lead) C2 Overall width w/o lead protrusion (kinked lead) C2 3 (.118) 9 (.354) 4 (.157) 18.5 (.728) 16 (.63) 38.0 (1.496) 32.2 (1.268) 55.0 (2.165) 43.2 (1.7) 54.0 (2.126) 42.5 (1.673) 1.0 (.039) 11 (.433) Lead protrusion I1 L1 Protrusion of cutout L L Protrusion beyond hold tape I2 I2 Not specified Sprocket hole pitch P0 P0 12.7 (0.5) Pitch tolerance Device pitch: MF-R005-MF-R160, MF-R/90, MF-RX110/72-MF-RX185/72 Device pitch: MF-R185-MF-R400, MF-RX110-MF-RX375 MF-R/600, MF-RX250/72-MF-RX375/72 Tape thickness Tape thickness with splice: MF-R010-MF-R160, -0.5/+1.0 (-0.02/+.039) t MF-RX110/72-MF-RX185/72, max. max. max. max. max. max. max. max. 20 consecutive 0.3 (.012) 1 (.039) 12.7 (0.5) 0.3 (.012) 25.4 (1.0) 0.6 (.024) t1 0.9 (.035) 1.5 (.059) max. t1 2.3 (.091) max. t Tape thickness with splice: MF-R250-MF-R1100 MF-RX110-MF-RX375, MF-R/90, MF-RX250/72-MF-RX375/72 max. -0.5/+0.75 (-0.02/+0.03) 0.2 (.0078) 3.0 (.118) 0.5 (.02) Splice sprocket hole alignment 0 Body lateral deviation h h Body tape plane deviation p p Lead spacing F F Reel width w W2 Reel diameter d a Space between flanges less device W1 h 0 0 5.08 (0.2) 56 (2.205) 370 (14.57) 4.75 (.187) max. 0.3 (.012) 1.0 (.039) 1.3 (.051) 0.2 (.008) max. max. 3.25 (.128) DIMENSIONS = Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications IEC Mark Dimension Description EIA Mark Dimensions Dimensions Tolerance Arbor hole diameter f c 26 (1.024) 12.0 (.472) Core diameter: MF-R, MF-RX, MF-R/90 h n 80 (3.15) max. Core diameter: MF-RX/250, MF-R/600 h n 91 (3.58) max. 56 (2.2) 67 (2.64) 64 (2.52) Box: MF-R, MF-RX, MF-R/90 Box: MF-RX/250 Box: MF-R/600 372 (14.6) 372 (14.6) 372 (14.6) Consecutive missing places: MF-R, MF-RX, MF-R/90 3 Consecutive missing places: MF-RX/250, MF-R/600 none 372 (14.6) 362 (14.25) 362 (14.25) Empty places per reel: MF-R, MF-RX, MF-R/90 Not specified Empty places per reel: MF-RX/250, MF-R/600 0.1 % max. max. max. max. Taped Component Dimensions - Figure 1 p h h p Reference plane P1 H1 A L I2 H1 F H H0 B W0 I1 P0 D0 DIMENSIONS = MM (INCHES) W1 W User direction of feed Cross section A - B Reel Dimensions - Figure 2 t Reel h d User direction of feed Upper side Tape Lower side f h w Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.