IRFIB5N65A, SiHFIB5N65A Vishay Siliconix Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) * Low Gate Charge Qg Results in Simple Drive Requirement 650 RDS(on) () VGS = 10 V 0.93 Qg (Max.) (nC) 48 Qgs (nC) 12 Qgd (nC) 19 Configuration RoHS* COMPLIANT * Fully Characterized Capacitance and Avalanche Voltage and Current * Compliant to RoHS directive 2002/95/EC Single APPLICATIONS D TO-220 FULLPAK * Improved Gate, Avalanche and Dynamic dV/dt Ruggedness Available * Switch Mode Power Supply (SMPS) * Uninterruptible Power Supply * High Speed Power Switching G * High Voltage Isolation = 2.5 kVRMS (t = 60 s, f = 60 Hz) TYPICAL SMPS TOPOLOGIES G D S S * Single Transistor Flyback N-Channel MOSFET * Single Transistor Forward ORDERING INFORMATION Package Lead (Pb)-free SnPb TO-220 FULLPAK IRFIB5N65APbF SiHFIB5N65A-E3 IRFIB5N65A SiHFIB5N65A ABSOLUTE MAXIMUM RATINGS TC = 25 C, unless otherwise noted PARAMETER Drain-Source Voltage Gate-Source Voltage Continuous Drain Currente TC = 25 C VGS at 10 V Continuous Drain Current TC = 100 C Pulsed Drain Currenta Linear Derating Factor Single Pulse Avalanche Energyb Repetitive Avalanche Currenta Repetitive Avalanche Energya Maximum Power Dissipation TC = 25 C Peak Diode Recovery dV/dtc Operating Junction and Storage Temperature Range for 10 s Soldering Recommendations (Peak Temperature)d Mounting Torque 6-32 or M3 screw SYMBOL LIMIT VDS VGS 650 30 5.1 3.2 21 0.48 325 5.2 6 60 2.8 - 55 to + 150 300 10 1.1 ID IDM EAS IAR EAR PD dV/dt TJ, Tstg UNIT V A W/C mJ A mJ W V/ns C lbf * in N*m Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Starting TJ = 25 C, L = 24 mH, RG = 25 , IAS = 5.2 A (see fig. 12). c. ISD 5.2 A, dI/dt 90 A/s, VDD VDS, TJ 150 C. d. 1.6 mm from case. e. Drain current limited by maximum junction temperature. * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 91174 S09-0518-Rev. B, 13-Apr-09 www.vishay.com 1 IRFIB5N65A, SiHFIB5N65A Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYP. MAX. Maximum Junction-to-Ambient RthJA - 65 Maximum Junction-to-Case (Drain) RthJC - 2.1 UNIT C/W SPECIFICATIONS TJ = 25 C, unless otherwise noted PARAMETER SYMBOL TEST CONDITIONS VDS VGS = 0 V, ID = 250 A MIN. TYP. MAX. UNIT 650 - - V - 670 - mV/C 2.0 - 4.0 V nA Static Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current Drain-Source On-State Resistance Forward Transconductance VDS/TJ VGS(th) Reference to 25 C, ID = 1 VDS = VGS, ID = 250 A IGSS IDSS RDS(on) gfs mAd VGS = 30 V - - 100 VDS = 650 V, VGS = 0 V - - 25 VDS = 520 V, VGS = 0 V, TJ = 125 C - - 250 - - 0.93 VDS = 50 V, ID = 3.1 A 3.9 - - S VGS = 0 V, VDS = 25 V, f = 1.0 MHz, see fig. 5 - 1417 - - 177 - - 7.0 - VDS = 1.0 V, f = 1.0 MHz - 1912 - VDS = 520 V, f = 1.0 MHz - 48 - - 84 - - - 48 - - 12 - - 19 - 14 - - 20 - - 34 - - 18 - - - 5.2 - - 21 ID = 3.1 Ab VGS = 10 V A Dynamic Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Output Capacitance Coss Effective Output Capacitance Coss eff. Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd Turn-On Delay Time td(on) Rise Time Turn-Off Delay Time Fall Time VGS = 0 V tr td(off) VDS = 0 V to 520 VGS = 10 V Vc ID = 5.2 A, VDS = 400 V see fig. 6 and 13b VDD = 325 V, ID = 5.2 A RG = 9.1 , RD = 62 , see fig. 10b tf pF nC ns Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current Pulsed Diode Forward Currenta Body Diode Voltage IS ISM VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Forward Turn-On Time ton MOSFET symbol showing the integral reverse p - n junction diode D A G TJ = 25 C, IS = 5.2 A, VGS = 0 S Vb TJ = 25 C, IF = 5.2 A, dI/dt = 100 A/sb - - 1.5 V - 493 739 ns - 2.1 3.2 C Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Pulse width 300 s; duty cycle 2 %. c. Coss eff. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 % to 80 % VDS. d. t = 60 s, f = 60 Hz. www.vishay.com 2 Document Number: 91174 S09-0518-Rev. B, 13-Apr-09 IRFIB5N65A, SiHFIB5N65A Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 100 100 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V I D , Drain-to-Source Current (A) I D , Drain-to-Source Current (A) TOP 10 1 20s PULSE WIDTH 4.5V TJ = 25 C 0.1 0.1 1 10 10 TJ = 150 C TJ = 25 C 1 0.1 4.0 100 Fig. 1 - Typical Output Characteristics I D , Drain-to-Source Current (A) 10 4.5V 1 20s PULSE WIDTH TJ = 150 C 10 VDS , Drain-to-Source Voltage (V) Fig. 2 - Typical Output Characteristics Document Number: 91174 S09-0518-Rev. B, 13-Apr-09 100 RDS(on) , Drain-to-Source On Resistance (Normalized) 3.0 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V 1 6.0 7.0 8.0 9.0 Fig. 3 - Typical Transfer Characteristics TOP 0.1 5.0 VGS , Gate-to-Source Voltage (V) VDS , Drain-to-Source Voltage (V) 100 V DS = 100V 20s PULSE WIDTH ID = 5.2A 2.5 2.0 1.5 1.0 0.5 0.0 -60 -40 -20 VGS = 10V 0 20 40 60 80 100 120 140 160 TJ , Junction Temperature ( C) Fig. 4 - Normalized On-Resistance vs. Temperature www.vishay.com 3 IRFIB5N65A, SiHFIB5N65A Vishay Siliconix 2000 ISD , Reverse Drain Current (A) 1600 C, Capacitance (pF) 100 V GS = 0V, f = 1MHz C iss = Cgs + C gd , Cds SHORTED C rss = C gd C oss = C ds + C gd iss 1200 oss 800 400 rss 0 10 100 TJ = 150 C 1 TJ = 25 C 0.1 0.2 A 1 10 1000 Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage 0.8 1.0 1.2 Fig. 7 - Typical Source-Drain Diode Forward Voltage 100 ID = 5.2A OPERATION IN THIS AREA LIMITED BY RDS(on) VDS = 520V VDS = 325V VDS = 130V 16 10us ID , Drain Current (A) VGS , Gate-to-Source Voltage (V) 0.6 VSD ,Source-to-Drain Voltage (V) VDS , Drain-to-Source Voltage (V) 20 V GS = 0 V 0.4 12 8 10 100us 1ms 1 10ms 4 FOR TEST CIRCUIT SEE FIGURE 13 0 0 10 20 30 40 50 0.1 TC = 25 C TJ = 150 C Single Pulse 10 100 1000 QG , Total Gate Charge (nC) VDS , Drain-to-Source Voltage (V) Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage Fig. 8 - Maximum Safe Operating Area www.vishay.com 4 10000 Document Number: 91174 S09-0518-Rev. B, 13-Apr-09 IRFIB5N65A, SiHFIB5N65A Vishay Siliconix RD VDS 6.0 VGS D.U.T. RG 5.0 + ID , Drain Current (A) - VDD 4.0 10 V Pulse width 1 s Duty factor 0.1 % 3.0 Fig. 10a - Switching Time Test Circuit 2.0 VDS 90 % 1.0 0.0 25 50 75 100 125 150 10 % VGS TC , Case Temperature ( C) t d(on) Fig. 9 - Maximum Drain Current vs. Case Temperature tr t d(off) t f Fig. 10b - Switching Time Waveforms Thermal Response (Z thJC ) 10 D = 0.50 1 0.20 0.10 PDM 0.05 0.1 t1 0.02 t2 0.01 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC SINGLE PULSE (THERMAL RESPONSE) 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 , Rectangular Pulse Duration (s) Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case V DS tp 15 V L VDS D.U.T. RG IAS 20 V tp Driver + A - VDD 0.01 Fig. 12a - Unclamped Inductive Test Circuit Document Number: 91174 S09-0518-Rev. B, 13-Apr-09 A I AS Fig. 12b - Unclamped Inductive Waveforms www.vishay.com 5 IRFIB5N65A, SiHFIB5N65A EAS , Single Pulse Avalanche Energy (mJ) Vishay Siliconix 800 TOP BOTTOM ID 2.3A 3.3A 5.2A QG 600 10 V QGS 400 Q GD VG Charge 200 Fig. 13a - Basic Gate Charge Waveform 0 25 50 75 100 125 150 Starting TJ , Junction Temperature ( C) Current regulator Same type as D.U.T. Fig. 12c - Maximum Avalanche Energy vs. Drain Current 50 k 12 V 0.2 F 0.3 F 800 + V DSav , Avalanche Voltage (V) D.U.T. 780 - VDS VGS 3 mA 760 IG ID Current sampling resistors Fig. 13b - Gate Charge Test Circuit 740 720 700 A 0 1 2 3 4 5 6 I av , Avalanche Current (A) Fig. 12d - Typical Drain-to Source Voltage vs. Avalanche Current www.vishay.com 6 Document Number: 91174 S09-0518-Rev. B, 13-Apr-09 IRFIB5N65A, SiHFIB5N65A Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations * Low stray inductance * Ground plane * Low leakage inductance current transformer + - - * * * * RG dV/dt controlled by R G Driver same type as D.U.T. ISD controlled by duty factor "D" D.U.T. - device under test Driver gate drive P.W. + Period D= + - VDD P.W. Period VGS = 10 V* D.U.T. ISD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage VDD Body diode forward drop Inductor crurent Ripple 5 % ISD * VGS = 5 V for logic level devices Fig. 14 - For N-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?91174. Document Number: 91174 S09-0518-Rev. B, 13-Apr-09 www.vishay.com 7 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000