Toggles Series JS02 & JS04 Rockers General Specifications Electrical Capacity (Resistive Load) Pushbuttons Switching Rating: Nonswitching Rating: Programmable Illuminated PB Other Ratings JS02 Extended Actuator Keylocks Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Total Travel: 50 milliohms maximum 100 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 2,000 operations minimum 2,000 operations minimum .031" (0.8mm) Materials & Finishes JS02 Extended Actuator JS04 Flush Actuator 50 milliohms maximum 100 megohms minimum @ 100V DC 300V AC minimum for 1 minute minimum 2,000 operations minimum 2,000 operations minimum .026" (0.65mm) JS04 Flush Actuator Actuator: Glass fiber reinforced polyamide Glass fiber reinforced polyamide Cover: Glass fiber reinforced polyamide (UL94V-0) Glass fiber reinforced polyamide (UL94V-0) Base: Glass fiber reinforced polyamide (UL94V-0) Glass fiber reinforced polyamide (UL94V-0) Contacts: Beryllium copper with gold plating Copper alloy with gold plating Terminals: Brass with gold plating Brass with gold plating Rotaries Slides 25mA @ 24V DC 0.1A @ 50V DC H Environmental Data Operating Temp Range: JS02 Extended Actuator: -20C through +70C (-4F through +158F) JS04 Flush Actuator: -30C through +85C (-22F through +185F) Humidity: 90 ~ 95% humidity for 96 hours @ 40C (104F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Tilt Tactiles Ultra-Miniature SMT DIP Slides Soldering: Cleaning: Reflow Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Note: Switches are packaged in OFF position and should be soldered in OFF position. These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL 94V-0 rated cover & base The JS Series slides have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current circuit. When used as intended in a low-voltage, low-current circuit, the results do not produce hazardous energy. Supplement Accessories Indicators Touch PCB Processing H24 www.nkk.com Toggles Series JS02 & JS04 Ultra-Miniature SMT DIP Slides Rockers Distinctive Characteristics Pushbuttons Extended and flush slide actuators available. Programmable Illuminated PB Twin sliding contact mechanism with self-cleaning action (JS02) provides smooth actuation and produces high contact reliability. Gold plated contacts prevent oxidation and sulfide effect and provide stable contact resistance. Keylocks Use of self-extinguishing UL94V-0 certified material in cover and base provides high arc resistance and high insulation resistance. Terminal spacing conforms to standard PCB grid. For JS02: .100" (2.54mm) For JS04: .050" (1.27mm) H Tactiles End-to-end stackable. Slides Rotaries Gull-wing terminals ensure secure PCB mounting and prevent dislodging during vapor phase and infrared convection reflow soldering. Tilt Packaged in tape-reel or stick-tube. Tape-reel packaging meets EIA-481-D Standard. Indicators Touch Coplanarity: all considered surfaces must lie between two parallel planes that are a maximum distance apart of .0059" (0.15mm). (Additional coplanarity details in Terms and Acronyms in the Supplement section.) Accessories Actual Sizes JS02 www.nkk.com Supplement JS04 H25 Toggles Series JS02 & JS04 Ultra-Miniature SMT DIP Slides Rockers TYPICAL SWITCH ORDERING EXAMPLE 02 08 A P4 S Programmable Illuminated PB Pushbuttons JS Mounting SMT .100" (2.54mm) for Extended Actuator 04 SMT .050" (1.27mm) for Flush Actuator A Extended for 02 Mounting Code F Flush for 04 Mounting Code Packaging S Stick-Tube R Tape-Reel Not available in bulk No. Of Positions H 04 4 Positions 08 8 Positions Contact Material & Rating P4 Gold Rated 25mA @ 24V DC Tactiles Slides Rotaries Keylocks 02 Actuator Tilt DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Touch JS0208AP4-S Indicators Extended Slide Actuator, 8 Positions SPST OFF-ON Circuit Accessories .100" (2.54mm) Terminal Spacing Gold Contacts with 25mA Rating Supplement Stick-Tube Packaging H26 www.nkk.com Toggles Series JS02 & JS04 Ultra-Miniature SMT DIP Slides TYPICAL SWITCH DIMENSIONS Single Pole 4 Positions * Extended Actuator 3 4 (0.8) Travel .031 (11.1) .437 (0.3) .012 (2.54) Typ .100 (0.25) .010 5 (7.62) .300 (1.1) Typ .043 (1.0) .039 (0.6) .024 (0.7) .028 (0.5) Typ .020 7 1 2 3 4 5 6 7 8 8 (8.9) .350 (9.8) .386 1 (3.7) .146 6 (1.5) Typ .059 Pushbuttons 2 2 (0.8) .031 3 4 (1.1) Typ .043 (7.62) .300 Programmable Illuminated PB 1 (1.9) .075 Rockers ON (6.2) .244 (2.54) Typ .100 (7.62) .300 End View Schematic Single Pole JS0204AP4 8 Positions * Extended Actuator ON (6.2) .244 3 4 6 5 7 8 (0.8) Travel .031 (21.26) .837 (0.3) .012 (2.54) Typ .100 (0.25) .010 9 (7.62) .300 (1.1) Typ .043 (0.7) .028 (0.5) Typ .020 (1.0) .039 (0.6) .024 (2.54) Typ .100 (17.78) .700 11 12 13 14 15 1 16 2 2 3 (0.8) .031 4 5 6 7 8 (17.78) .700 (1.26) .050 5 6 7 8 Schematic Single Pole (0.7) Typ .028 4 9 10 11 12 13 14 15 16 (1.1) Typ .043 End View JS0208AP4 4 Positions * Flush Actuator H ON 5 6 7 8 (5.8) .228 (6.22) .245 (7.65) .301 (8.1) .319 (1.27) Typ .050 (0.1) .004 (0.5) Typ .020 (3.81) .150 (0.6) .024 4 5 6 7 8 (3.81) .150 Schematic JS0404FP4 8 Positions * Flush Actuator (1.25) Typ .049 (1.27) Typ .050 (0.35) .014 9 10 11 12 13 14 15 16 (5.8) .228 (11.3) .445 (2.2) .087 (0.1) .004 (0.5) Typ .020 (1.27) Typ .050 (8.89) .350 (0.15) .006 (7.65) .301 (8.1) .319 (0.6) .024 1 2 3 4 5 6 7 8 Accessories (0.65) Travel .026 Indicators ON 1 2 3 4 5 6 7 8 (0.65) .026 3 Single Pole .028 (1.26) .050 (0.76) Typ .030 End View (0.7) Typ 2 1 2 3 4 (2.2) .087 (0.15) .006 1 Tactiles (0.65) .026 (1.25) Typ .049 (1.27) Typ .050 (0.35) .014 Tilt (0.65) Travel .026 1 2 3 4 5 6 7 8 (0.76) Typ .030 9 10 11 12 13 14 15 16 (8.89) .350 Schematic End View www.nkk.com Touch 1 2 3 4 Supplement 3 (8.9) .350 (9.8) .386 1 (3.7) .146 10 (1.5) Typ .059 Keylocks 2 Rotaries 1 (1.9) .075 Slides JS0408FP4 H27 Toggles Series JS02 & JS04 PACKAGING Rockers S Stick-Tube Packaging Pushbuttons Switches are packaged in OFF position. Switches are not available in bulk and must be ordered in the following increments: Programmable Illuminated PB Extended Actuator JS0204AP4-S: 46 pieces per stick-tube JS0208AP4-S: 24 pieces per stick-tube (7.0) .276 (530.0) 20.866 (12.0) .472 Keylocks Flush Actuator JS0404FP4-S: 80 pieces per stick-tube JS0408FP4-S: 45 pieces per stick-tube (4.8) .189 (530.0) 20.866 Rotaries (11.5) .453 R Tape-Reel Packaging for Extended Actuator (1.75) .069 (2.0) Typ .079 (11.5) .453 3 1 2 (24.0) .945 (2.0) Typ .079 Tilt (1.75) .069 Touch (0.35) .014 Direction of Feed (5.0) .197 Tape Dimensions for JS0204AP4-R Tape-reel packaging meets EIA-481-D Standard. (6.5) R .256 (16.0) Typ .630 (1.5) Dia Typ .059 (4.0) Typ .157 3 2 3 (10.5) Typ .413 ON (14.25) Typ .561 1 (80.0) Dia 3.150 (80.0) Dia 3.150 5 6 (6.0) .236 7 (32.0) 1.260 8 (2.0) Typ .079 (21.7) .854 4 (2.0) Dia Typ .079 Accessories Indicators 4 (6.5) .256 (10.3) .406 Minimum Leader Length: 15.75" (400mm) Minimum Trailer Length: 6.3" (160mm) (11.5) .453 3 (2.5) .098 (1.5) Dia Typ .059 JS0204AP4-R: 500 pieces per tape-reel JS0208AP4-R: 500 pieces per tape-reel (1.5) Dia Typ .059 (4.0) Typ .157 (16.0) Typ .630 ON Switches are packaged in OFF position. Switches are not available in bulk and must be ordered in the following increments: H Tactiles Slides Ultra-Miniature SMT DIP Slides Supplement Overall Dia (330.0) 13.0 Reel Dimensions H28 (24.4) .961 (30.4) Max 1.197 (32.4) 1.276 JS0204AP4-R (38.4) Max 1.512 JS0208AP4-R www.nkk.com (6.0) .236 (10.3) .406 Direction of Feed (1.7) Typ .067 (0.35) .014 (1.5) Typ .059 Tape Dimensions for JS0208AP4-R (5.0) .197 Toggles Series JS02 & JS04 PACKAGING (CONTINUED) (4.0) Typ .157 (11.5) .453 (1.5) Dia Typ .059 5 (24.0) .945 (2.3) .091 (1.5) Dia Typ .059 (4.0) .157 (8.7) .343 Tape-reel packaging meets EIA-481-D Standard. (6.6) .260 ON Minimum Leader Length: 15.75" (400mm) Minimum Trailer Length: 6.3" (160mm) (12.0) Typ .472 1 2 3 4 JS0404FP4-R: 2,000 pieces per tape-reel JS0408FP4-R: 2,000 pieces per tape-reel (2.0) Typ .079 Rockers Switches are packaged in OFF position. Switches are not available in bulk and must be ordered in the following increments: (1.75) .069 Pushbuttons Tape-Reel Packaging for Flush Actuator Programmable Illuminated PB R (0.3) .012 Direction of Feed (2.7) 1.06 Tape Dimensions for JS0404FP4-R (24.4) .961 (4.0) .157 (8.7) .343 (30.4) Max 1.197 (1.5) Dia Typ .059 5 (24.0) .945 (2.3) .091 (1.5) Dia Typ .059 (2.0) Typ .079 Overall Dia (330.0) 13.0 (11.5) .453 1 2 3 4 5 6 7 8 (80.0) Dia 3.150 (4.0) Typ .157 Direction of Feed ON (10.5) Typ .413 (12.0) Typ .472 Keylocks (6.5) R .256 (2.0) Typ .079 (11.7) .461 Rotaries (1.75) .069 (0.3) .012 (2.7) 1.06 H Tape Dimensions for JS0408FP4-R Supplement Accessories Indicators Touch Tilt Tactiles Reel Dimensions for JS0404FP4-R & JS0408FP4-R Slides Ultra-Miniature SMT DIP Slides www.nkk.com H29