Series JS02 & JS04 Ultra-Miniature SMT DIP Slides
H24
H
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkk.com
Electrical Capacity (Resistive Load)
Switching Rating: 25mA @ 24V DC
Nonswitching Rating: 0.1A @ 50V DC
Other Ratings
JS02 Extended Actuator JS04 Flush Actuator
Contact Resistance: 50 milliohms maximum 50 milliohms maximum
Insulation Resistance: 100 megohms minimum @ 500V DC 100 megohms minimum @ 100V DC
Dielectric Strength: 500V AC minimum for 1 minute minimum 300V AC minimum for 1 minute minimum
Mechanical Life: 2,000 operations minimum 2,000 operations minimum
Electrical Life: 2,000 operations minimum 2,000 operations minimum
Total Travel: .031” (0.8mm) .026” (0.65mm)
Materials & Finishes
JS02 Extended Actuator JS04 Flush Actuator
Actuator: Glass fiber reinforced polyamide Glass fiber reinforced polyamide
Cover: Glass fiber reinforced polyamide (UL94V-0) Glass fiber reinforced polyamide (UL94V-0)
Base: Glass fiber reinforced polyamide (UL94V-0) Glass fiber reinforced polyamide (UL94V-0)
Contacts: Beryllium copper with gold plating Copper alloy with gold plating
Terminals: Brass with gold plating Brass with gold plating
Environmental Data
Operating Temp Range: JS02 Extended Actuator: –20°C through +70°C (–4°F through +158°F)
JS04 Flush Actuator: –30°C through +85°C (–22°F through +185°F)
Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
PCB Processing
Soldering: Reflow Soldering Recommended. See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Note: Switches are packaged in OFF position and should be soldered in OFF position.
Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards: UL 94V-0 rated cover & base
The JS Series slides have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current circuit.
When used as intended in a low-voltage, low-current circuit, the results do not produce hazardous
energy.
General Specifications
Series JS02 & JS04
Ultra-Miniature SMT DIP Slides
H25
H
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Rockers
Touch Tilt Toggles
www.nkk.com
Extended and flush slide actuators available.
Twin sliding contact mechanism with self-cleaning action (JS02)
provides smooth actuation and produces high contact reliability.
Gold plated contacts prevent oxidation and sulfide effect
and provide stable contact resistance.
Use of self-extinguishing UL94V-0 certified material
in cover and base provides high arc resistance and
high insulation resistance.
Gull-wing terminals ensure secure PCB mounting
and prevent dislodging during vapor phase and
infrared convection reflow soldering.
Terminal spacing conforms to standard PCB grid.
For JS02: .100” (2.54mm)
For JS04: .050” (1.27mm)
End-to-end stackable.
Packaged in tape-reel or stick-tube. Tape-reel packaging meets
EIA-481-D Standard.
Coplanarity: all considered surfaces must lie between two parallel planes
that are a maximum distance apart of .0059” (0.15mm). (Additional
coplanarity details in Terms and Acronyms in the Supplement section.)
Actual Sizes
JS02
JS04
Distinctive Characteristics
Series JS02 & JS04 Ultra-Miniature SMT DIP Slides
H26
H
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkk.com
TYPICAL SWITCH ORDERING EXAMPLE
02JS
SPST OFF-ON Circuit
Gold Contacts with 25mA Rating
Extended Slide Actuator, 8 Positions
.100” (2.54mm) Terminal Spacing
Mounting
02 SMT .100” (2.54mm)
for Extended Actuator
04 SMT .050” (1.27mm)
for Flush Actuator
Contact Material
& Rating
P4 Gold Rated
25mA @ 24V DC
A
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
JS0208AP4-S
P4
No. Of Positions
04 4 Positions
08 8 Positions
S
Packaging
SStick-Tube
RTape-Reel
Not available in bulk
08
Actuator
AExtended for 02
Mounting Code
FFlush for 04
Mounting Code
Stick-Tube Packaging
Series JS02 & JS04
Ultra-Miniature SMT DIP Slides
H27
H
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Rockers
Touch Tilt Toggles
www.nkk.com
TYPICAL SWITCH DIMENSIONS
(5.8)
.228
(0.15)
.006 (0.6)
.024
(8.1)
.319
(0.35)
.014
.228
(5.8)
(0.35)
.014
(0.15)
.006
(0.6)
.024
(8.1)
.319
Single Pole 4 Positions • Extended Actuator
JS0204AP4
Single Pole 8 Positions • Extended Actuator
JS0208AP4
Single Pole 4 Positions • Flush Actuator
JS0404FP4
Single Pole 8 Positions • Flush Actuator
JS0408FP4
1
5
2
6
3
7
4
8
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
1
6
1
5
2
6
3
7
4
8
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
End View
End View
Schematic
Schematic
Schematic
Schematic
(9.8)
.386
(1.0)
.039
(0.6)
.024
(0.3)
.012
(7.62)
.300
(0.25)
.010
(0.8)
.031
(0.8) T
ravel
.031
(1.1) Typ
.043
(3.7)
.146
(2.54) Ty
p
.100
(0.5) Typ
.020 (7.62)
.300
(0.7)
.028
(9.8)
.386
(1.0)
.039
(0.6)
.024
(0.3)
.012
(7.62)
.300
(0.25)
.010
(0.8)
.031
(0.8) T
ravel
.031
(1.1) Typ
.043
(3.7)
.146
(0.7)
.028
(2.54) Ty
p
.100
(0.5) Typ
.020 (17.78)
.700
(1.1) Typ
.043
(2.54) Typ
.100
(8.9)
.350
(1.5) Ty
p
.059
(7.62)
.300
1234
5678
(1.1) Typ
.043
(2.54) Typ
.100
(8.9)
.350
(1.5) Ty
p
.059
(17.78)
.700
5678
13 14 15 16
1234
9101112
(3.81)
.150
(0.76) Typ
.030
(1.27) Typ
.050
(1.25) Typ
.049
(7.65)
.301
1234
5678
(8.89)
.350
(0.76) Typ
.030
(1.27) Typ
.050
(1.25) Typ
.049
(7.65)
.301
1235
9101112
4678
13 14 15 16
End View
End View
(1.27) Typ
.050
(0.5) Typ
.020
(8.89)
.350
(0.1)
.004
(2.2)
.087
1
ON
2345678
(11.3)
.445
(1.26)
.050
(0.65)
.026
(0.65) Travel
.026
(0.7) Typ
.028
ON
1234
(6.22)
.245
(1.26)
.050
(0.65)
.026
(0.65) Travel
.026
(0.7) Typ
.028
(1.27) Typ
.050
(0.5) Typ
.020
(3.81)
.150
(0.1)
.004
(2.2)
.087
ON
(1.9)
.075
(6.2)
.244
(11.1)
.437
1
32 4
(1.9)
.075
(6.2)
.244
(21.26)
.837
ON
1
32 4
5
76 8
Series JS02 & JS04 Ultra-Miniature SMT DIP Slides
H28
H
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkk.com
PACKAGING
Tape-Reel Packaging for Extended Actuator
Switches are packaged in OFF position.
Switches are not available in bulk and must
be ordered in the following increments:
JS0204AP4-R: 500 pieces per tape-reel
JS0208AP4-R: 500 pieces per tape-reel
Minimum Leader Length: 15.75” (400mm)
Minimum Trailer Length: 6.3” (160mm)
Tape-reel packaging meets EIA-481-D Standard.
SStick-Tube Packaging
Switches are packaged in OFF position.
Switches are not available in bulk and must
be ordered in the following increments:
Extended Actuator
JS0204AP4-S: 46 pieces per stick-tube
JS0208AP4-S: 24 pieces per stick-tube
R
1.512
(38.4) Ma
x
(80.0)
3.150
Dia
(32.4)
1.276
R
Typ
(2.0)
.079
(10.5)
.413
Typ
(6.5)
.256
(330.0)
13.0
Overall Dia
(12.0)
.472
(7.0)
.276
(530.0)
20.866
JS0204AP4-R JS0208AP4-R
Direction of Feed
(2.0) Dia Typ
.079
(1.5) Dia Typ
.059
(4.0) Typ
.157
(16.0) Typ
.630
(2.0) Typ
.079
(1.75)
.069
(14.25) Typ
.561
(32.0)
1.260
(6.0)
.236
(6.0)
.236
(10.3)
.406
(1.5) Typ
.059
(1.7) Typ
.067
ON
1
32 4
5
76 8
(21.7)
.854
(0.35)
.014
3°
(5.0)
.197
Tape Dimensions for JS0208AP4-R
Direction of Feed
(1.5) Dia Typ
.059
(1.5) Dia Typ
.059
(4.0) Typ
.157
(16.0) Typ
.630
(2.0) Typ
.079
(1.75)
.069
(11.5)
.453
(24.0)
.945
ON
1
32 4
(10.3)
.406
(6.5)
.256
(2.5)
.098
(5.0)
.197
(0.35)
.014
(11.5)
.453
3°
Tape Dimensions for JS0204AP4-R
Flush Actuator
JS0404FP4-S: 80 pieces per stick-tube
JS0408FP4-S: 45 pieces per stick-tube
Reel Dimensions
(530.0)
20.866
(11.5)
.453
(4.8)
.189
(30.4) Ma
x
1.197
(24.4)
.961
(80.0)
3.150
Dia
Series JS02 & JS04
Ultra-Miniature SMT DIP Slides
H29
H
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Rockers
Touch Tilt Toggles
www.nkk.com
PACKAGING (CONTINUED)
(2.7)
1.06
(0.3)
.012
(6.6)
.260
5°
Direction of Feed
(1.5) Dia Typ
.059
(1.5) Dia Typ
.059
(4.0) Typ
.157
(12.0) Typ
.472
(2.0) Typ
.079
(1.75)
.069
(11.5)
.453
(24.0)
.945
(8.7)
.343
(4.0)
.157
(2.3)
.091
ON
1 2 3 4
Direction of Feed
(1.5) Dia Typ
.059
(1.5) Dia Typ
.059
(4.0) Typ
.157
(12.0) Typ
.472
(2.0) Typ
.079
(1.75)
.069
(11.5)
.453
(24.0)
.945
(8.7)
.343
(4.0)
.157
(2.3)
.091
1
ON
2345678
(2.7)
1.06
(0.3)
.012
(11.7)
.461
5°
(80.0) Dia
3.150
(30.4) Max
1.197
(24.4)
.961
R
Typ
(2.0)
.079
(10.5)
.413
Typ
(6.5)
.256
(330.0)
13.0
Overall Dia
Reel Dimensions for JS0404FP4-R & JS0408FP4-R Tape Dimensions for JS0408FP4-R
Tape Dimensions for JS0404FP4-R
Tape-Reel Packaging for Flush Actuator
Switches are packaged in OFF position.
Switches are not available in bulk and must
be ordered in the following increments:
JS0404FP4-R: 2,000 pieces per tape-reel
JS0408FP4-R: 2,000 pieces per tape-reel
Minimum Leader Length: 15.75” (400mm)
Minimum Trailer Length: 6.3” (160mm)
Tape-reel packaging meets EIA-481-D Standard.
R
